Is there a simple bit of code which I can add to a button which will always select the next tab along?
Looking to add a 'next tab' button at the top of each sheet so it can be run through quickly, almost as a presentation.
I could just do
Sheets("TabName").Select
But that would involve doing a new one for each sheet, and would need modifying if I then re-ordered the sheets.
if I change the name of my sheet throught this code, how I can selected again? ...
View 9 Replies View RelatedI am looking for the code that I would use so that when the workbook is opened it would always open with "Main" sheet.
View 4 Replies View RelatedI have a command button on sheet MASTER. When the workbook is Activated I want it to check and see if in sheet COSTM, cell B3 there are the words "Project Number", if so then show command button (ClearPrevious), if not, don't show. Also, when the If statement is finished, then the workbook needs to end up showing the sheet MASTER. I have tried various codes and none work, or they are on perpetual loops. I know this has got to be simple, but cannot find an example to take from to solve the issue. Would appreciate any help offered. Below is code I have right now.
Private Sub Worksheet_Activate()
If Sheets("COSTM").Select Range("B3").Select = "Project Name:" Then
Me.ClearPrevious.Visible = True
Else
Me.ClearPrevious.Visible = False
End If
Sheets("MASTER").Select
End Sub
I work for one half of a joint venture & am responsible for planning & expediting. The other half does purchasing. The bi-weekly PO download reports I receive are less than useful. I have already written the code to delete undesired sheets & add, format, and enter headers for a "Summary" sheet.
I need code to move to the next row, and run formulas to pull data from the next sheets, and repeat until there are no more sheets.
The number of sheets will vary from one download to the next, and the sheet names will vary from one download to the next.
Following are example formulas that need to be run on successive rows while pulling from successive sheets.
I am running Excel 2013 on Windows 8.1
I have a workbook with a Cost Analysis sheet, a master menu sheet, and then all the sub sheets. I have coded command buttons on the master sheet, so once a category is selected, it goes to the appropriate sub sheet. On the subsheet is a list of items of varying sizes, and command buttons beside that which will allow the user to "Select" that particular size. Once the size is selected, the verbage in cell B5 plus the verbage (size) beside the selected amount, and the prices (labor and materials) in the next two columns, need to be transferred to the first available blank line, starting with line C5, to the Cost Analysis sheet. I have never done coding before for a Loop (i.e. For i = ???) and am not sure how to get it to do what I want. After they select that, they can pick a command button that takes them back to the master menu so they can continue picking various items until they are through. Then the Cost Analysis sheet will show all the items they picked, (name of item, material cost and labor cost: Columns B, C, & D). Not everything is coded yet (such as selecting a command button to go back to the main menu, because I wanted to make sure I could solve this problem before doing the easy stuff).
I read over quite a few of the previous threads and am not sure how to change them to suit my circumstance. I know some code (VB), but not much. I do not understand the concept of DIM, and how the loop works to make it happen myself, and all the websites I could find were not suited to my situation of copying three cells of data to the first blank cell on another sheet.
is it possible to hide a sheet automatically if i select the other sheet. For example, I have sheet1, sheet2 and sheet3, I'm at sheet2 and if i select the sheet1, sheet2 and sheet3 will automatically hides.
View 4 Replies View RelatedVBA Code which would ask me to select a value between N or S.
If I select "N" then the pivot field items "Guj","Del","Mum" should get selected.
If I select "S" then the pivot field items "Bng","Kar","KER" and "TIR" should get selected.
I record macro and hit select all and that action won't record. what's the macro code for select all in excel. i assumed it was the same as word
selection.wholestory
but it's not
What would be some code to select the 1st empty row in a sheet. I need to select entire row. To be easy it could be first empty cell in A, but would like whole row selected.
View 3 Replies View RelatedI have a code that gives me path of all files inside a folder. I want to modify it.
I want to select files (individually or in group) inside a folder and then get the path. All files are .xlsx in folder.
[Code] .....
I thought i would create some code to highlight a batch of cells so i can modify formatting all together rather than cell by cell
I am unable to get the generated code to select all ranges together, it only shows the last range
Here is my code
Code:
Sub SelectRanges()
'
' Macro1 Macro
'
'
Range("D12:H12").Select
[Code]....
I have a workbook and have created a filter across range A1 - BU1. I want to filter column BQ. In this column I want to use the filter to show all values except for 0.
View 2 Replies View RelatedI have 8 car models in column A of sheet1 and I have a list box control with every car model on sheet 1 as well. I would like code to select all the models from column a in the list box with code.
View 2 Replies View RelatedI am trying to copy/paste the same data range from many sheets into a summary sheet.
Specifically, I'm attempting to copy (B697:G710) from 100 or so sheets into the summary sheet, one after another
I don't know much about VBA and am using the macro recorder. Unfortunately, when I attempt to paste the data from the next sheet to the summary sheet, it overwrites the info from the prior sheet. I have attempted using the down arrow and Ctrl downarrow but the recorded macro continues to select the same cell in the summary sheet into which it pastes the data.
I have been recording different sets of commands then copying/pasteing them together to complete what I want. I have tried to clean it up as best I can but im sure it does things it does not need to. Is there a way to tell it to select all sheets in "Book2.xls" then remove the formatting (font color,comments,shading) rather than using the Array and naming each and every sheet?
What this will end up doing is openeing about 12 files, copying specific tabs from each of those files and pasteing them all to the same workbook (in this example it would be Book2). Then removing the formatting.
Workbooks.Open Filename:="F:123Book2.xls"
Windows("Book1.xls").Activate
Cells.Select
Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Select
Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Copy Before:=Workbooks("Book2.xls").Sheets(1)
Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Select
Cells.Select
Selection.Interior.ColorIndex = xlNone
Selection.Font.ColorIndex = 0
Selection.ClearComments
I have a row of formulas that reference other sheets in my workbook (i.e. Cell A4=Sheet2!A1, Cell B4=Sheet2!B1, etc). I need to have VBA find the last cell in that row with data. I tried "End(xlToRight).Column" but it goes all the way to the end because all of the cells have formulas. I need to find the last cell that is empty of data or maybe >0 would work.
View 9 Replies View RelatedI have created the following code by recording a macro. The ActiveCells (“A1.A5203”) were based upon the actual number of records at that time. I wish for this macro to be used in a template and the actual number of records will vary from time to time. What do I need to add to this code to allow the AutoFill function to operate and fill only the actual number of records that exist.
ActiveCell.FormulaR1C1 = "=LEN(RC[-2])"
Selection.AutoFill Destination:=ActiveCell.Range("A1:A5203")
ActiveCell.Range("A1:A5203").Select
ActiveCell.Offset(0, 1).Range("A1").Select
ActiveCell.FormulaR1C1 = "=IF(RC[-1]=8,""0""&RC[-3],RC[-3])"
Selection.AutoFill Destination:=ActiveCell.Range("A1:A5203")
ActiveCell.Range("A1:A5203").Select
I have a macro which when run firstly unprotects the worksheet, makes a change,then protects the sheet again with line of code below.
Sheet.Protect Password:="whateveritis"
What do I need to add to that to ensure that it allows selecting unlocked cells only.
I have made a sheet where the user can insert/delete rows in a certain intervall of rows. The upper row is 17, that is I have named the cell "First" and then the last row "Last" and then I am using integers:
Dim intStartrow As Integer
Dim intLastrow As Integer
intStartrow = ActiveSheet.Range("First").Row + 1
intLastrow = ActiveSheet.Range("Last").Row - 1
So it is only possible to add/delete rows if the markerer is in between the above rows.
Now I would like to select the rows, from first to last. Since the rows are never the same, users add and delete rows all the time, I can not use
Range("A17:Z49").Select
Can I somehow make a range selection using the Integers, somethimg like
With ActiveSheet
Selection."intStartrow:intLastrow"
End With
I have some buttons in different sheets in an excel file, each button has its own code, that is the reason I can not move the code related to each object to another location (sheet or module).
And I have one piece of code in Module1 (Auto_load) in order to execute automatically this routine every time file is opened. Inside "auto_load" routine I initialize some values of some check buttons,options buttons and positions of some objects in diferent sheets, but I can not pass the value of variables between Module and Sheet's code even when I declare as public variables and/or function.
I have the following structure: ...
In my macro, I need code that will select all the rows that contain data in a given column, minus the first row which has a header.
View 6 Replies View RelatedI am adding shapes with text (msoShapeOval) to an image on a worksheet but I cant get the size of the "ShapeRange" to work dependant on the value assigned to "sTxtlen".
I had msgbox's within each Case but none were triggered allthough using another msgbox to show the length of sTxtLen is correct prior to the Select Case.
The issue I am having is that the code fails if there is ever a "sheet2" left open. I need it to always target the sheet Data5m.
What seems to happen is the sheet targets the first available sheet. This book only consists of 1 sheet, but generates other sheets later, sometimes extra sheets are left open.
Microsoft Excel Objects - This Workbook code
'The following is for the Userform DataReport code
DataReport.ComboBox1.Clear
Columns("N:N").Select
Range("A2:HX29921").Sort Key1:=Range("N2"), Order1:=xlAscending, Header:= _
xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
Data5m.Range("A1").AutoFilter
Call FillCombobox(Data5m.Range("N2", Data5m.Cells(Rows.Count, "N").End(xlUp)), DataReport.ComboBox1)
DataReport.Show
End Sub
Forms - DataReport
Code:
Private Sub ComboBox1_Change() 'was A, now N
DataReport.ComboBox2.Clear
If Data5m.FilterMode = True Then: Data5m.ShowAllData
Data5m.Range("A1").AutoFilter field:=14, Criteria1:="=" & DataReport.ComboBox1.Value
Call FillCombobox(Data5m.Range("X2", Data5m.Cells(Rows.Count, "X").End(xlUp)).SpecialCells(xlCellTypeVisible), DataReport.ComboBox2)
[Code] ..........
correct below code?
Code:
Private Sub WorkSheet_Change(ByVal target As Range)
Dim rngdv As Range
Dim oldval As String
Dim newval As String
If target.Count > 1 Then GoTo exithandler
On Error Resume Next
Set rngdv = Cells.spcialcells(xlCellTypeAllValidation)
[code].....
i would like to select multiple options from dropdown... but it is not working...
I have a button set to bring up an inputbox. enter serial number.
What I need to do is enter the serial number and then have the macro look through a
single column of values to match it then go to that row.
This seemed so simple I thought I could get it but alas here I sit...
I have tried to search the forum for a similar code but haven't found one that was close enough to make sense to me. I have ut together alot of individual actions, but how to get the value inputed to "search" the column and once found go to that row.
I also need to make sure it accounts for new rows being added in the future. (no set row range)
I have a spreadsheet that contains multiple rows per user. I need a combo or list box that pops up asking them to select their name from the drop down list. The list would be based on column A and would only include their name once.
When they select their name, the macro would then open the Form option from the Data menu, the Criteria button would be pushed and their name entered into the form, to return the first record their name appears on, then they could forward through the records, and update using the Next record button.
I need to write some code that will write a sum formula and include all the cells to the left of the active cell, however this range is variable. I suspect it would be something like:
ActiveCell.FormulaR1C1 = "=SUM(xlLeft)"
but this just enters the formula "SUM(xlLeft)".
I've had a look through the forum and can't see an answer, so apologies if I'm duplicating something!
I have a spreadsheet where column O has five conditions:
1 PO in
2 High Probability
3 Medium Probability
4 Low Probability
Blank
I need to colour code the whole row based on the value in the cells; if there were four conditions, I could do this with conditional formatting, but with five (with white as the fifth condition), I need to look at VBA.
However, I'm having difficulty colouring the whole row; how do I do this?
e.g. what I need to do is:
If O2 = "1 PO in"; Select A2:T2; Colour green
In addition, I need to ensure that if there is no data in column D, but column O is "1 PO in", it is highlighted in a separate colour. I have a macro for that, but don't know whether in needs to be put into the code before or after the macro needed above...
How do i check a checkbox on an excel worksheet?
View 5 Replies View Related