VB Code To Select All Rows With Data In A Column
Dec 3, 2008In my macro, I need code that will select all the rows that contain data in a given column, minus the first row which has a header.
View 6 Replies
ADVERTISEMENT
Select Data Rows For Pivot Table Code
Dec 31, 2006I have worksheet with data . Everytime number of rows with some data in it changes . Like sometime there are 100 rows with data or other tome it may be 57 only. I want to write VB code to select only those rows which have data. Thereafter I will use Pivot Table code to get required information. I know VB code to generate Pivot Code. But what happens is that if any blank row gets selected in data range for Pivot Tables, thereafter grouping by "Month" is not done.
go through attached file? In Module 1 ( which contains macro ) instead of R1C1:R8C4 , I want range with data only.
Select Case Code For Column A Values To Populate Results In Column B In Same Row?
May 28, 2014I'm trying to write a simple VBA code to loop through values in the range A14:A138 and based on the value (of a possible four values) in any row of that range, populate the adjacent column in the same row with a conditional result. For example if A14 = "Cat", then B14 = "I"; if instead A14 = "Dog", B14 = "II", etc. If there is no value in column A, the result should be blank (i.e. "").
I believe are in coding the destination range since I can get it to work for just one cell in B! Below is my code that is not working...
[Code].....
Excel VBA Code To Select A Range (rows) Based On Values And Delete
Aug 8, 2013I am trying out with a code which checks for cell value as "Select" in column IU and then checks for corresponding column IV for value as "0". Please note that "Select" and "0" are populated by formulas. I need the select "Select" and "0" till the next "Select" occurs in column IU and delete the selected range and continue the process until last non empty cell based on column C.
I have written the below code but it doesn't work.
Code:
Public Sub Test()
Dim nRow As Long
Dim nStart As Long
[Code]....
I could have uploaded the excel file that I am working on but did not find any upload attachment option.
Code To Delete Rows Based On Status Code In Column
Jul 24, 2009I'm trying to write a VBA script which will delete all rows in my Excel spreadsheet where Column I (which contains a status code) does not contain the word "Completed".
At the moment, I'm doing this the other way round: my script is able to search for entries in Column I which contain the status codes "Pending", "Awaiting Authorisation", "In Progress" etc and delete them. The idea is that when all those rows are deleted, I'll only be left with rows which have a status of "Completed". This works fine at the moment. However, the concern is that if a brand new status code is added to the data file, my script would be unable to pick it up and delete it. This is a small sample of the code I'm currently using (which deletes all the rows with statuses other than Completed):
Select All Rows With Same Date In Column H
Nov 23, 2006I have a history worksheet which itemises all stock movements and enters all the movements on the next empty row as they are processed.
The transaction date for each movement is recorded in column H.
How can I select all rows with the same date in column H bearing in mind that there will be different numbers of rows each day?
Code To Select Cell At End Of Data
May 24, 2007I am trying to copy/paste the same data range from many sheets into a summary sheet.
Specifically, I'm attempting to copy (B697:G710) from 100 or so sheets into the summary sheet, one after another
I don't know much about VBA and am using the macro recorder. Unfortunately, when I attempt to paste the data from the next sheet to the summary sheet, it overwrites the info from the prior sheet. I have attempted using the down arrow and Ctrl downarrow but the recorded macro continues to select the same cell in the summary sheet into which it pastes the data.
VBA Code To Select Last Cell In Row With Data
Jul 7, 2008I have a row of formulas that reference other sheets in my workbook (i.e. Cell A4=Sheet2!A1, Cell B4=Sheet2!B1, etc). I need to have VBA find the last cell in that row with data. I tried "End(xlToRight).Column" but it goes all the way to the end because all of the cells have formulas. I need to find the last cell that is empty of data or maybe >0 would work.
View 9 Replies View RelatedSelect The Visible Cells And Count Down 50 Rows In Column
Oct 14, 2008I would like to select the visible cells, and then count down 50 rows in column A - is this possible?
Vba Select Rows Based On Info In A Column, Then Paste Into New Workbook
Jul 7, 2009I'm using excel 2003. I would like to select and copy rows of data within a worksheet of a workbook and then paste those rows into a newly created excel workbook. That is the easy part. The complication is that I would like the macro to select the rows based on a particular string value that will be impossible to specify in a fixed way (i.e., it will change from project to project). Let's say the variable that distinguishes the rows is location, so some are from Tokyo, some New York, and some from Paris. Using vba, how can one 'splice' the data into (in this case, three) seperate workbooks based on the string/values of another variable?
I am familiar with auto-filter, but in this case, I really do need to create seperate workbooks, rather than apply calculations to a selection of the data.
Select Column C And Delete Blank Entire Rows Till C300
May 4, 2014i want to delete entire blank row from column C2:C300 i mean if i have data c2:c100 then c101:c300 delete entire blank rows
View 4 Replies View RelatedCopying Only Rows With Data In First Column - Skipping Rows With Blank First Column
May 12, 2014I have 2 columns of data E and F. Column E has 11 different words that randomly repeat, Column F has 10 years of dates, about 1,000 entries (10/11/12 format). Both columns values come from formulas.
I am trying to copy cells E & F to columns K & L starting in row 2 only if there is is data in column E (one of the 11 words) and skipping all others rows. Both the E & F values of tthe row must be copied together, i.e if text is in E45, then copy E45 and F45 into column K and L starting with K2 & L2. This is a task which will be repeated multiple times as data is replaced in columns A-D.
Select Column Data By Date
Apr 18, 2007I am looking for a macro that will put data from another worksheet by the date. So if A1 is 01/01/2007 I want to bring the information in from A2,A3,A4 and so on in A1 on the other worksheet. But if B1 is 01/01/2007 I want to bring the information in for B2,B3,B4 and so on in A1 on the other worksheet.
View 4 Replies View RelatedMerge Duplicate Rows And Sum One Column - VBA Code?
Jun 2, 2012In a big data sometimes I have identical rows (maybe the 'Quantity' column has different value). I would like to merge them into one and add the quantities together. I have to use B and C (I need both) to find out if these rows are identical.
For example:
A1=date B1=111222 C1=ABCD ... and G1=quantity (1)
A2=date B2=111222 C2=ABC ... and G2=quantity (1)
A3=date B3=111222 C3=ABCD ... and G3=quantity (2)[code]......
Select Arbitary Range Of Data In Column
Mar 4, 2009I wish to collect an arbitary range of data in a column. Hence I wish to identify were the data begins (for example C10) and where the data ends (for example C22), and then copy it and paste it at another sheet. How to do that with VBA-code?
View 9 Replies View RelatedSelect Next Column After Data Input Into InputBox
Jul 18, 2009Here is my delimma. I am using the standard InputBox for my users to input the number of errors found for each category in a record from a daily report. The problem I having is that every time the user types in data using the InputBox it overwrites the previous days numbers. I need to set up the InputBox code so that after the user has input the numbers for that day that the next time the InputBox is used it selects the next column to the right and continues to do this for each day.
View 4 Replies View RelatedAmend Macro To Select All But Last Column Of Data
May 12, 2014Macro below - it now works and selects all the data in spreadsheet and converts to Proper Case
However I also need a macro to select all except the last column of data and convert all except the last column to Proper Case
It is for Post / Zip code info. so wish to keep it in Upper Case.
What I have already is:
Code:
Sub Propercase()
Dim LastRow As Long, LastColumn As Long
LastRow = Cells.Find(What:="*", After:=Range("A1"), SearchOrder:=xlByRows, SearchDirection:=xlPrevious).Row
LastColumn = Cells.Find(What:="*", After:=Range("A1"), SearchOrder:=xlByColumns, SearchDirection:=xlPrevious).Column
Dim r As Range, c As Range
Set r = Range("A1").Resize(LastRow, LastColumn)
[Code] .....
I was hoping I could easily amend the above to select all except last column.
Select Column And Delete Row Where Data Is Duplicate
Nov 17, 2006I've got this macro which works well, but I have to edit it to change the column I want to check for dupes. I don't mind doing that, but now I have to share the macro with someone who is not comfortable changing the references in the code every time they run it.
As it is it checks column G:G (7) for dupes and deletes the row. Good.
I'd like for it to do the same thing, but for whatever column the active cell is in.
I can use this:
Col = ActiveCell.Column
in place of the "7" in the With Range part
but I don't know how to replace the "G1:G".
Sub DeleteDuplicatesColumnG()
With Application
.ScreenUpdating = False
.EnableEvents = False
Code To Insert Rows In Next Sheet In Order Of Column B?
Apr 24, 2014The below code used to work for me perfectly but in the last couple days it's been acting up. The code is supposed to cut out 2 rows from sheet1 and insert it in order of column B in sheet2. Up until a few days ago the code was inserting the 2, cut, rows properly but now it inserts it at the top of the sheet.
Here is the workbook I'm working with TEST.xlsm
VBA Code For Deleting Rows Where Cell In Column A States
Mar 20, 2009I'm trying to get a VBA macro put together that would delete all the rows, throughout every sheet, and shift up wherever the cell in column A = "Delete Row" in a workbook I've made. In the below copy of the workbook you can see that a lot of the information from all the tables is linked to the topmost table on the 'Mix Detail Sheet'.
If the the Cell in column A is blank on that first table, its corresponding cells in tables throughout the workbook displays the words "Delete Row". I need the macro to delete the rows and shift everything up where this occurs.
Ideally I'd also like the macro to then delete the rows in that first table where the column A cells are blank.
Excel 2013 :: Formula For Getting Job Code To Appear In Column A Of Total Rows
Mar 10, 2014I've got general ledger information that I export out of my accounting software (see attached spreadsheet). From there, in another spreadsheet I do vlookup formulas to get information from this general ledger. However, in order for the vlookup formulas to work properly in the other spreadsheets, I have to go through this general ledger spreadsheet and manually enter just the first five numerical digits in column A for each Total row. I would like to be able to find a solution that would return just the first five characters of the category (column B found at the top of each section) into the cell in column A on each total row. I usually have to manually enter 50-100 of these many, many times a month so it gets time consuming after a while. I'm using Excel 2013.
View 1 Replies View RelatedEditting Macro To Select Last Empty Column To Paste Data
Nov 30, 2008I have a macro that automatically takes data from one sheet, copies it and pastes it on another sheet, but I want it to select the empty column that is to the right of the last column to contain data (so basically the next empty column). What code would I enter into editting my macro to be able to do this please?
Also, one thing I've tried to do with my macro is that when I select the data, it's suppose to select from the first name to the last. When doing the actions for the macro, I use "Ctrl + Shift + Down Arrow Key" to make the selection select the bottom of the list. However, when running the macro, if the list is longer (or shorter), the macro selects that number of cells instead of the action of just going to the bottom of the list. For example, if during the actions of the macro, I recorded using the Ctrl + Shift + Down Arrow Key that 50 cells were selected...next time if I have 60 cells, only 50 are selected, even though I used an action command which should select all the cells in that group (in this case being 60). Is there some code I can add to that so this would work correctly?
In case its required, here is the code from the macro:
Find Last Cell With Data In Column A Select All Up To A4 Then Format To Number
Oct 14, 2013I am trying to find the last cell with data in a spreadsheet once this has been found select all up upto cell A4 and then format these cells into number format to zero decimal places so far I have the following which finds the last cell:
LR = Cells(Rows.Count, "A").End(xlUp).Row
Range(Cells(LR, 1), Cells(LR, "A")).Select
VBA Code To Convert Multiple Rows As Column Header Grouped By Unique Key
Jul 24, 2014I have data in excel sheet in the below format:
Existing view.png
How to write a VBA code or Macro to get it in below format:
Required View.png
Timestamp column is the unique key.
Select And Copy Set Of Data In Column Based On Starting And Ending Values
Aug 26, 2013I have a macro that copies three sections of data from a word document and pastes it within the Excel worksheet. The column of data is pasted in a single column (data to be space-delimited and evaluated later), and what I would like the MACRO to do is separate the three sections of data based on the starting and ending values of the section and place them in different columns.
Section 1 : starts with the word "Team"
Section 1 : ends with the word "City"
Section 2 : starts with the word "Location"
Section 2 : ends with the word " Date"
Section 3 : starts with the word "Member"
Section 3: ends with the word "Age"
So section 1 would be pasted into cell C1, section 2 pasted into G1 and section 3 pasted into J1.
Each section will have vary in number of rows between the starting/ending values, so to cut and paste the section based on the starting and ending value is vital.
VBA Code To Copy And Paste To Specific Rows Based On Matching Column Header?
Dec 7, 2011I have a spreadsheet and I was wondering if there is a way to copy from a specific range in say A1:A5 in Sheet1 and paste into Sheet2 where the column matches cell A1 in Sheet1.
I am trying to do this in VBA and I was wondering if there is a way to do this.
VBA Code To Paste From Last Column With Data In It To Next Column
Oct 8, 2013The data exists in a spreadsheet that has Data from Column B2:CQ18, but it needs to be dynamic and update anytime someone clicks the button (the button is fine and works with all the other Macros)
Here is the code I have so far.
Code:
Dim LastCol As Range
Dim NextColPaste As Range
With Worksheets("Run Hours")
Set LastCol = Range("M3:M18").End(xlToRight)
Set NextColPaste = LastCol.Offset(, 1)
LastCol.Select
End With
That Code will Select the data in row 3 only and not the whole range of 3:18
I have tried Range (LastColData & "3:18").Select and that selects everything on the whole page from row 18 down.
I have done a lot of searching and for some reason this dynamic selection and pasting of data is escaping me this morning
Excel 2010 :: VBA Code For Inserting Text In All Column B-cells Of Multiple Selected Rows
Jul 11, 2012Software: Excel 2010, Windows 7
What is the VBA code for inserting text in all column B-cells of multiple selected rows?
I am creating a worksheet with a table containing various data related to orders of various materials (this is more or less data gathering from an older, paper-based 'system'). This table spans, columnwise, from A to D and expands downwards as more orders are added. The information in each column is: A=order number, B=type of material and C=material specs. and D=additional comments.
I've set it up so that the only thing I really have to do is to insert the type of material in the cells of column B, and the rest will sort itself out. Instead of having to insert a new row for each new entry and manually typing in the name of the material (these entries are often done in the midst of already existing data), I created several similar, macroed buttons for the different types of materials we use. These macros work by selecting the row of the currently active cell, inserting a new row and then add the name of the material in the column B-cell of this new row. What I am having trouble doing though, is to get the text-entry to work for a selection of multiple cells.
As an example, lets say that I would like to add 5 orders of "Grade A Steel" in the middle of the table - in the row above row 8. With the macro I currently have I can select cell B5, click the macro, and a new row will be inserted with "Grade A Steel" in column B of this new row. This action could be performed 5 times over, but would be easier if I could just mark a range of 5 cells, say B8:B12, click the macro and get the text/data inserted the column B-cells of all 5 of the new rows. So far I've been able to create a macro that inserts multiple new rows, but I've only been successful in filling the column B-cell in the first row leaving the 4 below empty.
Userform One Combobox Three Data Columns Select Required Column Based On Radio Button
Jun 10, 2013I have a user form that has one combo box on it that right now references one column of data.
Now I am being asked to have three columns of data and the combo box to show one of the three when a certain criteria is met.
I believe it would be easiest to have an additional combox with a change event when the box is populated with "whatever" in the field
So S:3 to S:5 have A, B, C
And EC:1-EC:59, ED:1-ED:59, EE:1-EE:59 contain the data that should show when S:3, S:4, or S:5 is selected.
If S:3 is selected then the list in EC:1 - EC59 would show and so on.
How To Count A Column If It Matches Data From Another Column In Seperate Rows
Feb 6, 2009I have two columns with dates. Colum A has the date of the deadline of a document while column b has the day it was sent. Column X will display the difference if its a positive integer ( i.e. if the document has been sent after the deadline). Now i have another column Y which displays the month as an integer of when the document was actually received.
Now i need a counter which will count the number of instances a positive integer is registered in column X according to the month in column Y. I have been trying everything but cant figure a simple way to do it. Im doing this so i can be able to see how many documents are sent after the deadline per month.