Code To Select First Empty Row
Jun 1, 2007What would be some code to select the 1st empty row in a sheet. I need to select entire row. To be easy it could be first empty cell in A, but would like whole row selected.
View 3 Replies
ADVERTISEMENT
Code Only Deleting One Empty Row Instead Of All Empty Rows
Jan 22, 2012I am using the following block of code, which cycles through the data and first deletes any cell with "Legal:" in it, and then cycles through again and deletes any row where the cell is blank.
The problem is that within the data, there are some locations where there are two blank rows in a row. When the code runs through, it deletes the FIRST blank row only, not the second. I Need ALL blank rows within the data set to be deleted.
Code:
Sub ModifyNewData()
Dim r As Range, rAll As Range
Dim WS As Worksheet
Dim iLast As Integer
[Code] ........
Also, if there is a way to write looking for blank rows into the first block of code looking for "Legal:" that would be cool too.
If not, just deleting all the blank rows is good. Right now, I have to have the second block of code run twice to get rid of the remaining blank rows.
Select Non Empty Cells
Oct 25, 2009How do I select all the NON EMPTY CELLS in a column?
and
How do I select all the NON EMPTY CELLS in a range?
Select Empty Text Boxes
Apr 21, 2014I have files where empty textboxes have been copied over tens if not hundreds of times, thereby slowing down the scrolling speed immensely.
I would be interested if there was a macro to
a) select all empty text boxes
b) select and delete all empty text boxes
Delete And Select Empty Cells
Mar 26, 2014I am trying to delete/select empty cells in Column C.
I tested the code in my work sheet which has close to a million rows. this code for some reason doesnt work. its selecting empty cells from Cell C, that is not working.
When I test it on a new worksheet it worked fine. ?
Select Rows When A Cell Is Not Empty
Oct 30, 2009I would like to select rows of a range (eg A7:D11) but only those rows where the cell in column C is not empty
View 5 Replies View RelatedVBA Select First Empty Cell Range?
Dec 6, 2013i need a code that will find the first empty cell in column "H" then select go down a row and select upto column "R" so in example range ("H2:R3") would get selected.
I am lost this is all i have so far and it doesn't work
Code:
Worksheets(newname).Range("H" & Rows.Count.End(xlUp).Offset(1) & ":" & "R" & Rows.Count.End(xlUp).Offset(2)).Select
Select Next Empty Cell In Given Range
Mar 1, 2014How do I select the next empty cell in a range?
Say I have myrange=Range("B32:B37"), then I want to put values into the next empty cell in that range.
I want to check if I have a value in B32, and if I have, I want excel to go to B33 and print a string there and the same for 34.
Vba To Select Next Empty Cell In A Column
May 28, 2007How do I code in VBA - I need to select the next empty cell down in a column - ie blank field so that I can transfer the next set of data
Select Non-empty Cell In A Column
Feb 5, 2007create a code such that it will select a cell which is not empty and display the content in that cell. For example , in the attached file below i would expect output to be cells(2,5) = 12 and cells(4,5) = 13
View 2 Replies View RelatedSelect First Empty Cell... Doesnt Work
Aug 10, 2009I am using this code to select the first empty cell in column A.
View 9 Replies View RelatedExcel 2007 :: Select Empty Rows
Oct 29, 2012Is there a way to select completely empty rows in Excel 2007 (Win 7)? I have found directions for highlighting empty cells (f5, Special, Blanks...), but sometimes the cells selected will be in rows with other filled cells in them so that doesn't really do what I need.
View 7 Replies View RelatedFind Next Empty Row And Select Cell In Column A
Jun 20, 2006how i can go about finding the next empty row (and select the first cell of that row (column A))? edit: It probably should be noted that there are cells in Columns A through P. There are rows where all and/or just one cell contains data per row. So i cannot use a " lookup" based on a single column.
View 2 Replies View RelatedSelect 1st Empty Cell In Column That Is Grouped
Feb 27, 2008I am trying to paste data into a sheet immediately following the last weeks data. I went to use an offset function like :
Range("A2").End(xlDown).Select
ActiveCell.Offset(1, 0).Select
However, each weeks data is "Grouped" and therefore the .end(xldown) only takes me to the bottom of the visible rows, and the offset function selects one of the hidden cells.
Select Dynamic Range Based On Non-empty Cells
Aug 7, 2009I require code to identify the last row in column 'A' that contains data, and then to select every row up to that one, and each column up to 'H'. My data begins on row 3, and the rows with data varies from row 7 through 120. The columns with data is constant so there is no need to test in that direction.
View 2 Replies View RelatedCheck For Blank / Empty / Error Cells In Select Case
Aug 3, 2012I am using a Uderform in order to check if some cells in several columns are higher or lower than values I set in my textboxes.
However, I think I am having a mistake in my code (it runs but doesnt return the correct informations) as I have blank cells in certain columns.
Concretely I am giving 1 point if the criteria is valid (if for example the value in the cell is <= 1) but some of these criteria are 1 when they should be 0.
As I said it runs but I need to add a fix for empty cells / blank cells and if possible N/A error cells in this so that the code gives 0 to the criteria and moves to the next column (next select case)..
Vba To Select Colored Tabs And Hide Empty Rows Within Range In Each Tab?
Jun 23, 2014I need to select all yellow tabs (color code 6) in a workbook with over 70 tabs and hide all empty rows within A1:I36 on each of these yellow tabs. the position of the tabs needs to be unchanged (sorting by tab color not allowed). I got this code from another excel forum but somehow it only works when i select one yellow tab and run it and the code only works on the one yellow tab i selected. can fix this code so that it can loop through all tabs (yellow and non color) and do what i mentioned above for each yellow tab?
Sub HideMT()
Dim Ws As Worksheet
Dim wsColor As Long
[Code].....
Editting Macro To Select Last Empty Column To Paste Data
Nov 30, 2008I have a macro that automatically takes data from one sheet, copies it and pastes it on another sheet, but I want it to select the empty column that is to the right of the last column to contain data (so basically the next empty column). What code would I enter into editting my macro to be able to do this please?
Also, one thing I've tried to do with my macro is that when I select the data, it's suppose to select from the first name to the last. When doing the actions for the macro, I use "Ctrl + Shift + Down Arrow Key" to make the selection select the bottom of the list. However, when running the macro, if the list is longer (or shorter), the macro selects that number of cells instead of the action of just going to the bottom of the list. For example, if during the actions of the macro, I recorded using the Ctrl + Shift + Down Arrow Key that 50 cells were selected...next time if I have 60 cells, only 50 are selected, even though I used an action command which should select all the cells in that group (in this case being 60). Is there some code I can add to that so this would work correctly?
In case its required, here is the code from the macro:
Find The End Value In A Row (right Side) And Select The Empty Cell To Its Right To Paste Data In
Nov 27, 2007i need a method to find the end value in a row (right side) and select the empty cell to its right to paste data in.
problem is the row where this data is may change so using
limit = (row, col).end(XlRight).Col
VB Code For Going To Next Entire Empty Row?
Jan 30, 2012i was currently gave this code. Sheets("Sheet1").Cells(Rows.Count, "A").End(xlUp)(2) = Me.TextBox2.Text Is there away this can modified to go to the next completly empty row in stead of just "A"? Like maybe A thru L or the entire row would be ok.
View 5 Replies View RelatedHiding Empty Rows Via VBA Code?
Jul 10, 2014automatically hiding empty rows on my table... though the table has been referenced via string of formulas which I added up on my worksheet.. Some of the rows on my table are empty and I tried a VBA code on automatically deleting the rows but then I realized that if that certain 'referenced' string of that cell is not empty anymore, that would cause me much trouble.. so basically I need a code that would automatically hide the rows that displays a result of "" and unhides when it is not empty.
View 14 Replies View RelatedCode To Delete All Empty Rows
May 20, 2014I need a code that I can run that will delete all rows that have nothing in at the bottom of the sheet. What I mean is I will be printing a file and because rows have been deleted that had data in a lot of sheets are being printed and wasted. So what I need is a before close code or something that will actually make the last row with data in the last row!
View 2 Replies View RelatedCode To Delete Empty Rows
May 7, 2007I have a database and at times I have empty rows. I am trying to write code that looks at the database (it may change daily) and deletes the rows that are empty. The code I've written does NOT work:
Sub emptyrows()
Dim emptyrows As Object
Set emptyrows = Cells(65536, 255)
If Rows = "" Then
Selection.Delete Shift:=xlUp
End If
End Sub
Insert Empty Rows Code
Jun 26, 2007Can VBA code that inserts between written rows a certain number of empty rows (and to be able to specify somewhere in the code the number of rows to be inserted)
View 9 Replies View RelatedRun Code Dependent On Cell Being Empty
Sep 17, 2007How do i write a line in a macro that basically says:- If this box say (m1) has data in it follow the next procedure that i have designed (which is copying data from one spreadsheet to another and re-designing it). However if this set box is empty do not copy anymore information over.
View 2 Replies View RelatedCode To Hide Rows When One Cell Is Empty And Other Is Not
Aug 1, 2007I am trying to run a macro that will hide rows when one cell is empty and another is not. Example: hide row when cell g is empty, but cell b is not. Or something to that effect. So far I've only used this code, but I would like to know how I can modify the code to fit the parameters I need:
Sub HideRows()
On Error Resume Next
With Range("B1:B300")
.EntireRow.Hidden = False
For i = 1 To .Rows.Count
If WorksheetFunction. Sum(.Rows(i)) = 0 Then
.Rows(i).EntireRow.Hidden = True
End If
Next i
End With
End Sub
Vba Code To Delete The Empty Bookmarks In Word Document?
Mar 17, 2014I have been automating reports that will be generated in word documents for every company. The baseline is that I have a excel sheet which contain the data inputs and a word template document (template with bookmarks). I have written a macro that generate the reports when the user clicks the button but found that there some reports that generates empty bookmarks since there is no data for the corresponding bookmark. I have uploaded the excel sheets that has the full data and the setup sheets. The setup sheet has the Column Number, Bookmark Name, Description. The data sheet has the data values and the code info sheet has the name of the template doc and the name of the destination folder where the reports will be generated and stored. My requirement is to delete the empty bookmark from the report named "Blackberry". where to write the macro for deleting the empty bookmarks and its sentences (whether its in excel book or word template doc)?
View 3 Replies View RelatedVBA Code To Goto First Empty Cell On Opening A Workbook.
Mar 3, 2009Is it possible to have excel 2007 open a workbook, activate the first sheet "output" and activate the first empty cell in column A - ready for user input? i.e.
I want my user to open workbook "EHB Stock" and automatically the first empty cell in column A of worksheet "output" is activated and ready for input.
The rest of my code is:
Total Data- Having A VB Code To Delete Empty Rows
Mar 7, 2007The spreadsheet I am working in has $ which I need to total. The information, or rows, can vary from day to day so there is no static place to have a cell with an @sum. Management wants me to add a pretty line that says
'Total' in one cell and the $ next to it. I have about 30 sheets with columns to total. Yuck, takes forever.
How do all of you total if you don't know the last row? At the top?
I thought it might work to put an @Sum in the last row of the spreadsheet, in the column
I need to total, and having a VB code to delete empty rows. That would be automatic.
Macro - Select Last Non Empty Column And Paste Information In Another Column?
Mar 25, 2013I am trying to find a macro that look for last non empty cell in column A and them paste a formula/comment in all cells of column B.
View 3 Replies View Related
