I need a VBA code to take everything after a certain word and put it in a new cell below it. The cell would have View More in it most of the time, and sometimes spaces will be messed up, so it will have a name after it but it should actually be in the cell under it. So if the name is A Maple, it will say View MoreA Maple. So the A Maple need to go in a cell below it.
View 6 Replies
I'm trying to use a formula in conditional formatting to highlight a cell red if the cell contains a 0 but the date shown in another cell has passed. I want to copy the formatting throughout a column but I don't want the cell to highlight if there is no date in the other cell concerned.
View 11 Replies View RelatedI have a spreadsheet containing thousands of addresses, and I need to separate the zip code from the address. Each address is in its own cell, and the only divider is spaces (sometimes two spaces). I attached an example of what some entries look like. Is it possible single out the zip code? addresslist example.xlsx
View 12 Replies View RelatedI have built a tool that automates the creation of some excel models. When each one of these models is created and deployed I need it to have all VBA code removed from it.
What vba command can I run that will strip all vba code out of a chosen workbook?
below is a VB code to email separate sheets based on sheet anme and email address on a sheet called " mail".
Code seems to fail at the last line " Next a" any ideas why this is not working
Sub Mail_sheets()
Dim MyArr As Variant
Dim last As Long
Dim shname As Long
Dim a As Integer
Dim Arr() As String
Dim N As Integer
Dim strdate As String
For a = 1 To 253 Step 3
If ThisWorkbook.Sheets("mail").Cells(1, a).Value = "" Then
Exit Sub
i have a large table, columns A:F, would like a code which would look at the text in column F and create a new row for each bit of text separated by comma
probably easier to show what i mean, here is a section of the table, in this example store 13121 needs multiple rows.
start with this:
HTML Code:
table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px;} .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc;}.tableizer-table th { background-color: #104E8B;
[code] ......
and turn it into this:
HTML Code:
table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px;} .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc;}.tableizer-table th {
[Code] .....
I need to separate row data from one workbook into separate workbooks based on cell data. Currently I filter the data, copy and paste it to a new workbook and save it. It's a tedious process and was hoping to find a way to automate it. I have attached a sample file. In this instance, I would like a separate workbook for the filtered data in Column 1 and then all the row data gets copied to new workbook. So all of Pennsylvania data would get copied to new workbook, then all of the Michigan data gets copied to a new workbook. I have also attached an example of the end result that I need.
View 9 Replies View RelatedExcel 2003: I need code that, when an "x" is entered in a cell in the "Activity" worksheet to assign a temporary unit #, it will look for the next available Temporary Unit # in the "Assign" worksheet. Then mark that unit # as "assigned" (by placing an "X" in the column next to it) and copy it to a cell in the "Activity" sheet.
I will be doing the same thing with assigning different types of PO numbers. I figure if I have the code for the Unit #, I can use the same logic for the other assignments, with some modifications, of course.
I've attached a sample workbook.
If I am not considering the most effective way to accomplish what I am trying to do here, I have no ego at all about someone suggesting a better solution.
I need to copy a range of cells from various columns/rows from 1 sheet into 6 other sheets, but into a specfic range of cells(in the same workbook). I am looking for a code which would copy the cells, then allow me to save the sheets it has copied them to as seperate workbooks without loosing the values it copied. I would also like to make amendments to the cells which have been copied onto the other sheets, without having an error message if I type anything into the cells, also having any blank cells left blank rather than placing the 'o' value in the cell.
View 2 Replies View RelatedI am looking for the VBA code to copy worksheets (with formatting) and save to a specific folder. The steps I am need to follow are:
Create a copy of the first worksheet
Save it to a specified folder and name it with the worksheet name
Repeat with all worksheets until the end of the workbook
I receive an extraction from AutoCAD that lists the electrical devices in a drawing. I don't have any problems extracting the letters. I have a problem extracting the device number and the device number extension.
The device label extraction is similar to this:
DCM1005-1
DCM1005-10
DCM1005A
MTR1005-1
MTR1005-10
MTR1005A
I want to create 3 columns from the device label: (I separated the column with commas)
A1, B1, C1, D1
DCM1005-1, DCM, 1005, 1
DCM1005-10, DCM, 1005, 10
DCM1005A, DCM, 1005, A
MTR1005-1, MTR, 1005, 1
MTR1005-10, MTR, 1005, 10
MTR1005A, MTR, 1005, A
How can I separate the following numeric/text combination into two (2) separate columns in Excel?
302ALTO
406AMZN
451AMRC
404AMAD
605ANCC
405ADRC
The result would be:
302 ALTO
406 AMZN
451 AMRC
404 AMAD
605 ANCC
405 ADRC
I'm trying to separate text from numbers into two separate cells...
Essentially, I would like the users to copy and paste data into Column A, as seen below. Then, hopefully by formula separate the text characters into Column B and the numbers into Column C.
Input: Output 1: Output 2:
Col A Col B Col C
Wells 123 Wells 123
Wells 1234 Wells 1234
Wells Fargo 123 Wells Fargo 123
Wells Fargo 1234 Wells Fargo 1234
Wells Fargo Inc 123 Wells Fargo Inc 123
Wells Fargo Inc 1234 Wells Fargo Inc 1234
Ideally, I would like to do this with a formula...
I have 10 very large workbooks that are all setup in the same format. In column Z is a numerical value from 1 to 83. I have been trying to filter the sheet and then copy one at a time from 1 to 83 but that takes a LONG time especially when there is 10 workbooks to do.
Is there anyway I can run a function or macro or something that would just automatically look down the column Z and put each row into a it's own workbooks?
I have attached a sample of what the workbooks look like right now.
Sample123.xlsx
I have a giant data sheet. I have to cherry pick certain data out of the list and send it to certain associates, in a new spreadsheet.
I want to do this automatically.
I can create the macro to select the data I want, and copy it over (values only), but I cannot find out how to do it in a new sheet with a new name that automatically gets generated with a unique filename (probably using the date).
Essentially, I want to copy my data spreadsheet (post-filter) into a new spreadsheet titled X mm-dd (where X is whatever I pick). I then want to delete several rows from it.
Ideally, the macro would do this (I will put a * next to things I can handle the code for, to save work):Filter Data *
Copy Data *
Create a New Spreadsheet named (Person's Name) mm-dd.xls
Paste Data (values, formats, column widths) to the new spreadsheet *
Delete Several Columns from the new spreadsheet *
Rename the sheet it's been pasted to
Re-filter data (new filter) *
Copy Data *
Paste Data (values, formats, column widths) to the same spreadsheet, only Sheet 2 *
Set the header of the spreadsheet with (Person's Name) and the date
Save the new spreadsheet
There will be as few as 1 sheet (in which case I would only want one worksheet in the new excel file), or as many as 4 sheets. I don't need a fancy way to do this, as it will only be done once a week, and I can just make the various cases required to do it even if it isn't pretty, but I can't figure out how to manipulate other files that haven't been created yet...
I'm working on a spreadsheet that includes items I sell as well as the packaging it goes in.
The formula I'm looking for basically will tell a cell that if one cell (# of box) is equal a certain # it will add two separate cells by the weight of the box.
I have cells for each of the following: Weight in lb and weight in oz of the item (no box), a cell which holds the number of the box (ranging from 1-15) and two cells with weight in lb and weight in oz which would be the total weight of the item + box.
So, for example, if weight of item equals 1 and box cell equals 2 then it will put the weight of item + weight of box into a third cell.
Here's a picture of my current spreadsheet : [URL] .....
Basically, I would like to do something such as if P3 = 5, then Q3 will equal N3 + U6 and R3 will equal O3 + V6.
In my spreadsheet, certain transactions are labeled as "Fees" in Row G. I need any amounts in Row D to be negative if they are labeled as "Fees" in Row G.
I could simply find them manually and make them negative, but the logic needed in this question will help me with similar problems I am facing.
I am thinking it is probably some combination of the "IF" command.
I have a string that has an IP that doesn't follow a fixed length.
Eg:
10.248.242.65Microsoft SQL Server Compact 3.5 Service
10.248.242.5EOL/Obsolete Software: Oracle Java SE/JRE/JDK 6/1.6
10.248.251.144Microsoft Sync Framework Service Pack
seperate that IP and the String. I tried the below formula =REPLACE(A2,MIN((FIND({"M","E","S"},A2))),0,"?")
It works fine for the above examples, but i want a formula that can seperate the string after the IP ranging from A-Z or a-z
getting any formula so that i can determine atleast the position of the First Letter(A-Z,a-z) from left.
how do i separate information like this:-
01/08/2007,09:54:27,27.05,27.06,27.05,361300
let say its in cell A1 & i want first information before the First , to appear in B1 which is 01/08/2007
then the information before the second , to appear in C1 which is 09:54:27
and so on
I have a listing of numbers in different catagories such as the following:
Type A:
1
Type B:
2
Type C:
4
Total:
7
I want to be able to have a cell automatically calculate to say:
Type A:
"(1/7)"
Type B:
"(2/7)"
Type C:
"(4/7)"
with that exact formating.
I have a dataset with full addreses listed in one cell. I would like to use "text to columns" to separate the data but am unable to use the text separater in the wizard. When I open the text to columns wizard the data appears to be divided with a "square" but I cannot add it as "other" for the delimeter. see the attached.
View 2 Replies View RelatedI have a cell with several values; however, Excel seems to only "see" the first item. I have tried to use Text to Columns with no success. I have tried copying and pasting the cell in a variety of formats with still no luck. I think a macro may work, but I am not skilled enough to know what to do. Here is an example of the cell data:
"PRT-BNS-SVR-01/p;2
PRT-BNS-EOC-01-5.5.04/-;1
PRT-BNS-SRD-01/t;4
PRT-BNS-SDD-03/f;1
PRT-BNS-SRD-03/g;1
PRT-BNS-SCI-01/bn;1
PRT-BNS-SAS-01/t;1
PRT-BNS-SDD-01/f;1
PRT-BNS-CIA-01/p;2
PRT-BNS-SVCP-01/r;2"
In this case, the first item is PRT-BNS-SVR-01/p;2. I need separations between the / the ; and between each item. I am not sure where the quotes come from, as this only happens when I copy and paste to text. I can not see them in Excel. When I use Text to Columns, the first material will separate, but it's like the others so not exist.
I want to be able to have two separate hyperlinks in one cell. First, is it possible?
Code:
=IF(SETUP!$C$7="Lean",HYPERLINK("#'CORE SYNERGISTICS (LEAN)'!C6","Core Synergistics"),
AND(HYPERLINK("#'CHEST & BACK'!C6","Chest & Back"),HYPERLINK('AB RIPPER X'!B7,"Ab Ripper X")))
C5=ACDefg-0087HzY
In D5, I want 1st 4 letters (EXACT)
In E5, last 10 letters (EXACT)
How to accomplish?
Ans
D5=ACDe
E5=gf-0087Hzy
I am try to separate my data from A1 to B1,C1, D1....... Here is what it look like in A1
C102, C110, C114, C116, C118, C120, C125, C128, C130, C131, C132, C134, C135, C139, C140, C143, C144, C19, C21, C22, C27, C30, C38, C40, C50, C56, C57, C59, C6, C60, C61, C69, C85, C88, C90, C94, C98
I want to separate them into several cells. Each cell can only have 30 characters or less. You can not cut it in the middle of the data.
After your separate B1 should be "C102, C110, C114, C116, C118," (30 characters)
C1 should be "C120, C125, C128, C130, C131," (30 Characters)
D1 should be "C132, C134, C135, C139, C140,"(30 characters)
E1 should be.......... till the end.
I try to several functions too. But it does not works.
I want to use two separate Unit of measurement according to two condition in a same cell.
View 3 Replies View RelatedI have multiple collumns with monetary value that are intended to automatically be deducted once the previous collumn is depelted.
I need to also have the values stop at 0 and not go into the negatives.
Here is what I have now
=IF(K12<=0,SUM(I11*5%)+I11-M12, IF(AND(I12<=0,K12<=0 )=TRUE, 0,SUM(I11*5%)+I11-M12))
Basically I have collumn 1 and 2
collumn 1 collumn 2
100,000 50,000
I need to have collumn 1 start to be deducted once collumn 2 reaches zero. I also need both collumns to stop at zero and not go negative.
I need to separate the content of every address cell to the four separate cells : city, street, street number, zip code
address cell examples: ...
I was wondering if there is a way to have a single cell display a value and a drop down list that shows the chosen value. For example, I want to be able to enter into a single cell "365" and select "Hours" from a drop down list and have both be displayed in the same cell. I want to do this because I like to be able to sort my spreadsheet and I have a lot of information that spans across the row that I want to keep tied together. Is this even possible?
View 2 Replies View RelatedI need to create a reference such as TUT001 from Tutorial in a separate cell.
Also where there are 2 names that have the same 3 letters at the start i need the number to be 002.
