How I can unlock a range of sheets that are password protected in my workbook.
I have 20 identical sheets one for each department which are protected by the same password.
It would be nice if I could rapidly lock and unlock these sheets.
What I need a set rng command in conjunction with a For Next loop?
code that will unlock cell g12 and af9 when cell e9 equals "WF-"
Basically I need it to say (I really don't know how to write code)
If "E9"="WF-" unlock "G12" and "AF12"
If not, clear contents of "G12" and "AF12"
I have a workbook whose worksheets I want to protect on open, and also want to unprotect by way of a module. The protect code is:
Code:
Private Sub Workbook_Open()
Sheets("Cornealrings").Protect Password:="elohim"
Sheets("Ferrararings").Protect Password:="elohim"
Sheets("Kera Rings").Protect Password:="elohim"
Sheets("IS CALCULATOR").Protect Password:="elohim"
Sheets("IS Manager").Protect Password:="elohim"
End Sub
The unprotect code is:
Code:
Sub Unprotect()
Sheets("Cornealrings").Unprotect Password:="elohim"
Sheets("Ferrararings").Unprotect Password:="elohim"
Sheets("Kera Rings").Unprotect Password:="elohim"
Sheets("IS CALCULATOR").Unprotect Password:="elohim"
Sheets("IS Manager").Unprotect Password:="elohim"
End Sub
The code stops at the first line of the unprotect event, with the message that the password is not correct. If I try to manually unprotect, the password is accepted.
Is there a way to lock and unlock multiple excel spread sheets with only one password at one go? For example if I have 5 sheets, I would like to be able to lock and unlock Sheets 2-5 with one password at one go while leaving sheet 1 unprotected. Do not want to type a pwd for each sheet.
View 9 Replies View RelatedI have an inventory log that requires multiple cells in different columns to be unlocked based on a reference cell's input.
So, if a cell in column E has "MORNING" entered then cells L/M/N are unlocked and said user can input data for that row, and only that row. If anything else is in E, then L/M/N are left locked.
Is there a way to do this without coding, just using regular IF() in the cell directly; IF(ISTEXT(E3)=MORNING, Unlock, KeepLock)? I know that's nowhere close to being a legitimate statement, but it's the best way I can translate my thoughts.
I am trying to run the following code on multile sheets in a workbook. so far this code is working fine for one worksheet. Can someone help me modify this so it runs on multiple sheets. There can be more then 1 worksheet in a workbook depending upon data ...
View 9 Replies View Relatedi have a macro code but i don't know how to apply it to all sheets in the same workbook
my code is
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Range("D5:D100"), Target) Is Nothing Then
Target.Offset(0, 1).Value = Now() [code]....
Am trying to find the VBA code to "ask a user for the password to unhide multiple sheets/tabs"
I have got the script for unhiding all sheets which is:
Sub Sheets_Unhide()
Dim sh As Worksheet
For Each sh In Worksheets
sh.Visible = True
Next
End Sub
What i would like though is for it to prompt with a password first before the code is executed for unlocking 50 odd sheets.. I know its not 100% fool proof, but would do for what i need!
I have a workbook with 10 sheets.
Each sheets has data starting row 14 and column B with row 13 being column Headers.
I want to copy data from each sheet, having column headers suppose A, F & G in to a single sheet. The position of column headers I want to copy are different in each sheets
Means macro will go to sheet1 first, he will copy data from column headers A, F & G and paste in new sheet suppose main.
then macro will go to sheet2, he will copy all the data from column headerA, F & G and paste it in main sheet after the last used row and so on.
I have a folder on a public drive. (\CFDIVIX1PublicPurchasing2009)
This folder contains multiple sub-folders (the sub folders are vendors which I purchase merchandise from) each sub-folder has 1 .xls file in it. Each file has 1 sheet containing all the information I need to retrieve.
Each one of these files has the same header information in cells A1 through I2 so I manually place that when I create this new workbook prior to inserting the macro. Each work sheet has a different # of rows depending on the number of items I buy from that particular vendor but I feel safe saying it never exceeds 250 rows per worksheet.
What I need
For the macro to pull up the first work sheet and pull out the data from cells A3 through I250 and place that data into my new work sheet in the same format. Then I want the code to move on to the next worksheet and pull out the A3 through I250 and place that data in the new worksheet directly below the last row of data that was pulled in. (Also it would be great if the code ignored blank values. Like if the first work sheet it pulled data from only had data in the first 10 rows I don’t want 240 rows of blank rows before the next set of data)
I hope that running this macro will accomplish transferring all of my data from these multiple sheets into a single work sheet containing all of the pricing for all of my vendors. Once I have this I can place a second sheet on the workbook and use a formula to pull out pricing information that I need on a per basis without having to search through 50 vendors to find who it comes from. I don’t control the vendor work sheets that I want to extract data from so I need to use the macro to run it weekly incase my purchasing dept makes changes.
I found the code below and it works perfectly if I want to copy all the other sheets to a master sheet. But, I need to specify specific sheets. Basically I have a workbook consisting of multiple sheets and multiple "master" sheets so I need to specify in the code which sheets it should be copying.
[Code] ........
I have a protected worksheet with most cells locked and some that are unlocked. I also know the password to unlock the sheet. VBA code to monitor a cell(B29 in my case) and if it has a value of 6.00 or more than it will unlock cell B34?
View 7 Replies View RelatedI need to do VBA coding. Got 12 Sheets for 12 month of Sales. Every Sheets are in same Header Format.
For Column R (Status), there's Filter Data "TRUE" and "FALSE". I have to move/copy "TRUE" item into Sheet Aging 2014.
I manage to transfer using only one Sheets using Advanced Filter VBA, failed with other Sheet.
I attached the file : Sales 2014.xlsx‎
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
I have been running a simulation for about 18 hours now and just received:
Run-time error '1004':
Method 'Add' of object ' Sheets' failed
I have been creating new sheets, importing data, pulling some values from the data then deleting the respective sheet. I am using:
ActiveWorkbook.Sheets.Add after:=Sheets(Sheets.Count)
The sheet is actually being added to the workbook, seemingly before the error. I resume the code, and a new sheet is placed in the workbook and it errors again. The Debugger stops and highlights on the code above.The sheet count number was 10895 at the error, just as an indicator of how many times the simulation has performed successfully. I am hoping this is something I can fix without having to start over...
I have a work sheet named "Main_List"...In column D starting with "D2" I would like to list worksheets that I would like to have printed via VBA.
The workbook has several hundred worksheets and I would like to list in column D only worksheets that I would like to print with VBA code.
I have a workbook with 26 sheets, labelled A to Z. Column A in all the sheets have names from rows A6:A35.
I need a macro or a code to extract all the names from each of the 26 sheets and paste it to a new sheet 'Names' under column A, such that names starting with 'B' paste under all the names 'A' and so forth till 'Z'.
I've got data being scraped from a site, putting 1 new workbook in a folder each day
each workbook has 40 sheets in it.
i need to run 5 modules in sequence on a sheet then loop to the next sheet and run the same 5 modules.
ive writen all the modules, and can loop them through the sheets in sequence but i cant work out how to loop them through the each workbook in the folder..
is there an easy way to do this or can it not be done because it would need access to the folder that holds all the wordbooks which lives outside of excel on the desktop ?
I have a file where I can not enter the VBAProject. If I click on it I get an error message and when I try to get into the Properties of the Project I get the same Message. The error message is "Project locked" (in german). I locked the file my self some month age, all passwords are saved but i am not asked to enter one. I think that i can remeber I was writing a macro in a nother file that locked and unlocked this specific file.
View 3 Replies View RelatedI have a shared file that is now mysteriously locked. How can I unlock the file so changes can be made?
View 4 Replies View RelatedI would like a macro to be able to save 26 tabs within the one document to individual PDFs.Preferably I would like to be able to specify each time exactly which tabs get printed, because often I don't need to print all 26, just the first 10 or so.I would like each PDF to automatically be named with the value in cell E10 of each tab.E10 already has a formula to create its final value. It references cells from other tabs within the same document. Hopefully the fact that this cell has a formula in it won't affect my ability to use the resulting value as a 'save as' reference?I would like it if the PDFs save to the same location as the Excel sheet from which they're generated is located. The location of the excel sheet will change every three months, so I'd prefer not to specify a location with a specific filepath, as it will have changed by the time I run the macro again.
I am using Excel 2010.
I am using MS Office 2010. I want to count---on multiple sheets---the number of times that a given cell is greater than another cell if and only if a third cell is equal to a given value. I want to do this for 4 sets of data on each sheet. I thought I had it figured out with this formula---
=SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$R1"),2*(AND("'"&$H$1:$H$43&"'!$E1">"'"&$H$1:$H$43&"'!$F1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$S1"),2*(AND("'"&$H$1:$H$43&"'!$G1">"'"&$H$1:$H$43&"'!$H1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$T1"),2*(AND("'"&$H$1:$H$43&"'!$I1">"'"&$H$1:$H$43&"'!$J1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$U1"),2*(AND("'"&$H$1:$H$43&"'!$K1">"'"&$H$1:$H$43&"'!$L1"))))
but it returns a value of zero each time. Clearly there is an error in the formula.
Here is some background:
-- $H$1:$H$43 is a block of cells that has the names of the sheets in the workbook
-- E1 and F1, G1 and H1, I1 and J1, K1 and L1 are the four groups of cells that I am comparing.
In the entire workbook, I want to add 1 (counting function) only when:
R1=2 AND E1>F1 or
S1=2 AND G1>H1 or
T1=2 AND I1>J1
U1=2 and K1>L1
on each appropriate sheet in the workbook.
I have saved this on a 2010 workbook as I am at home but this will be used on a 2003 workbook.
I have several projects on one spreadsheet which multiple users will be working and I am trying to create a summary sheet of the work carried out.
Each user is expected to carry out a task on each row of the data held in each worksheet (research, call, update etc) and each task (Option 1-5) is assigned a value. Each user is expected to meet a certain level of points per day to calculate productivity.
I am looking for a sumproduct along the lines of the summary sheet attached but mine just takes one sheet into consideration and I need one for all sheets.
I have a Excel 2010 workbook used to rota in a large amount of staff for a call centre, which is split into four teams. Each sheet corresponds to a month of the calendar year eg Jan201, Feb 2014 etc..
What im trying to do is put in a sheet at the front of the workbook that I can select the team, which populates the list of staff in that team and then checking across a specified date range gives the shifts that those respective staff will be working for the set time period (probably be looking at a seven day period and a 1 month period). (This in turn will be printed out to give to the staff members.)
I'm trying to put together a spreadsheet that tracks disc capacity increases, affected by any incoming projects. I've managed to do so for one project, but would like to for up to 10. The way i've designed the solution (i'm sure there are far more elegant ways, but hey) is thus:
A forecast worksheet keeps track of a grand total, taking information from sheets P1 -> P10 (being projects 1 to 10). I am unable to figure a way to add up all the increases from all 10 project worksheets with one succinct formula. What I use so far is: ='P1'!C83+SUMIF('P1'!E82,"=2009 - Q1",'P1'!D82) ..................
I've got no clue about all this, but I've had to get specific formula examples and fill in the blanks in order for my timesheet to work. There's just one final problem if somebody could please help.
This is a timesheet for a 5 day work week. I need to count the number of unique log numbers for a specific activity. The log numbers counted must be unique across the entire week, not just for each day, which means I want the formula to count the unique log numbers across multiple sheets.
The formula also has multiple conditions. I got 2 columns. The first part of the formula needs to verify a word, say, "split" and if it does it checks the adjacent cell for a unique log number. If both arguments are true, it counts the log as 1 unit.
Here is a working formula for only one page.
=COUNT(IF(D4:D29="split",IF(FREQUENCY(C4:C28,C4:C28)>0,1,)))
Here's 2 problems with this formula:
1. I will count if it encounters a blank cell in the Log numbers the first time (which will happen as not every activity we do has a log#), but it will stop counting if it encounters a second blank cell.
2. I don't know how to make it work across several sheets.
This is an alternate formula which works and skips the blank cells, but I don't know how to add the multiple condition of "split" and to have it work across multiple sheets. I just copied it Microsoft. As I said, I don't understand it, I just fill in the blanks.
SUM(IF(FREQUENCY(IF(LEN(C4:C29)>0,MATCH(C4:C29,C4:C29,0),""), IF(LEN(C4:C29)>0,MATCH(C4:C29,C4:C29,0),""))>0,1))
I've got several worksheets that all have the exact same layout that a user will enter unique information in to each worksheet. Then I've got a final worksheet that I want to have a button that the user can click and when they do, it will look to each worksheet and do the exact same process for each worksheet as follows:
It first looks to see if the worksheet is visible. If it is, I want it to copy the range A5 to K5 down until it gets to the last non-blank cell in column C. The first non blank cell that will be referenced will be C7. Then I want it to paste this information into the range A5:K5 on the final sheet named Sheet8 with the same values and keep cell formatting such as width and height, font. If the worksheet is not visible, it skips the sheet.
I want it to do this for each visible worksheet, placing the next visible worksheet info under the previous visible worksheet info. My current code as shown doesn't do that. It requires that something be inSheet8 A6 before it will even paste, then it pastes the info from A5:K5 but it doesn't do just the values nor does it keep the formatting. What I mean about not doing just the values is some of the info that needs to be copied comes from a drop down they can choose from and it copies the actual drop down menu. Also, it seems to copy all of the ranges from each sheet and paste it into just A5:K5 on Sheet8 and overwrites each other instead of pasting Sheet2 just below the information from Sheet1. So the only information shown after the entire process is completed is the information from the last visible sheet.
If Worksheets("Sheet1").Visible = True Then
Sheets("Sheet1").Range(Sheets("Sheet1").Range("A5:K5"),
Sheets("Sheet1").Range("C7").End(xlDown)).Copy
Sheets("Sheet8").Range("A5").End(xlDown)
End If
[Code]...
I am working with a nonprofit to set up their financial ledgers. There is one workbook with 12 sheets, one for each month. The goal is to be able to set up a formula that searches through all 12 sheets for every donation that a specific individual has made. For instance, let's say that John Smith gave x amount of money on 1/1/2000, y amount of money on 1/10/2000, and z amount of money on 2/2/2000. This data will appear on 2 different worksheets. I have the following formula, which allows me to look through one sheet at a time:
{=INDEX(Jan!$B:$B,SMALL(IF(Jan!$A:$A=Smith!$A$2,ROW(Jan!$A:$A)),ROW(1:1)))}
Where Column A in each sheet is individual name, and column B is amount donated. Sheet "Jan" is the data for the month of January, and sheet "Smith" is the culmination of John Smith's donations for the full year. Using this array function, I am able to retrieve all data for John Smith in the month of January, but I can't find a way to make one function that searches for all of John Smith's donations in each month. Is there a way to build an array function in VBA that would accomplish this?
I have about 20 workbooks with different file names for different projects all saved in the same folder. Each workbook has about 10 worksheets and each worksheet is named in a similar fashion in each of the 20 workbooks (eg. revenue, cost, variance etc.). I want to pull out a worksheet named ' forecast' from each workbook into a master workbook so that the master workbook would contain the 20 forecast worksheets.
View 9 Replies View RelatedAfter going through some posts in this site, I found that, we can use custom validation for locking a cells when the condition is not met.I have tried using that, But I am not able to get it correctly.I have attached the sheet for your ref.
What I want is, when I enter a month in A2 (Which will always be the 1st of that month), that particular column should get unlocked/should be able to edit that month's column only. I have just provided on table here, but what I want is for entire column so that, I can use the same formula for a larger sheet