I want a Macro to take a sheet (same named sheet) from several workbooks in one folder into a new workbook and paste each in one sheet in this new workbook. i want to rename the sheets in the new workbook based on the value in cell D2 ( i can manage that
How can i manage that by simple opening the folder or do i need to open all those workbook manually for that to be done.
What is the code to automatically save the new template worksheet in a folder and name defined in a couple of cells.
The folder name will be always be: "Q:AssetsCustomersfolder name"
I need the folder name to come from cell C3 on the spreadsheet and the filename to come from cell R3.
Would like a macro that will do the following:
- Go into a specified folder (ie. C:data) which contains multiple workbooks
- search each workbook for a column titled SCIN
- copy the cell labelled SCIN and 60 cells below it to a new workbook (summary workbook)
- repeat the process in all the workbooks until all of the SCIN columns have been located and copied into the summary workbook
I have up to 50 workbooks in one folder with data in a specific range. I also have one workbook which includes additional data, including conditional formatting and dropdowns. I need to copy the desired range from the first workbook in the source folder to the second workbook, then save the latter to my destination folder, using the same name as the first. I need to repeat this process for all workbooks in the source folder.
View 2 Replies View RelatedI wish for a macro to look in to a directory which remains constant, but then looks within a folder which is specified via a cell value in order to load a specific sheet from each file in to the workbook I am currently using. I wish for the loading to be done without having to open the workbooks manually, so something which opens them copies the data from the sheet specified and then closes.
This data is then to be pasted in to a new sheets within my workbook which are named after the file names that it pulls the "dump" sheet from.
As a side note, I will be using these sheets to produce calculations hopefully automatically as soon as they are loaded. They all have the same "shape" but contain differing data. Will it be easier in the long run for me to use this method of pasting data to new sheets named as their file names assuming there will be around 25 "dump" sheets needing to be loaded or would i be better having them paste all to one sheet just underneath each other with a couple of rows separating them?
I want it to return the subfolders from a named folder, but only the folder name, right now it returns the whole path. So my code has to then text to column that path, then delete the columns I don't need. Is there a way to shorten this? Here is my code so far:
'Lists Folders'
Worksheets(1).Range("A3:A300").Value = ClearContents
Worksheets(1).Activate
Dim row As Integer
Dim SearchFolders As Variant
row = 3
LookInTheFolder = "I:projects2Koch58MY8900PROCESS2013 Work (Phase 3)DIH_SulfolaneEquipment"
[code].....
Anyone up for getting me started on code to open a file in a "dynamic" directory, specifically:
Where
Main directory is G:REPORTS
The file name is "Pivot_xx-xx-xx.xls"
The directory where the file is located is G:REPORTSxx-xx-xx
xx-xx-xx is yesterday's date
I have several excel files in a folder, and they are named:
AA v.5
AA v.6
AA v.7
AA v.8
BB v.5
BB v.7
CC v.8
CC v.6
The "AA" and "BB" are names of who created it and v.5 are the week it was created.
What I would like to do is in an Excel file be able to choose to retrieve information about for example how man files with v.5 in its name.
OR information about all files with "BB v." in its name (to see all files created bye BB)
Or "BB v.4" (all files created bye BB in week 4)
Or "BB v.4"+"BB v.5"+"CC v.6"
The reason for this is that I would like to be able to create statistics from this so that I can see how it has changed like in a graph. So that I can see the difference and compare how many files BB and CC have created and which week.
code to create hyperlinks to all the workbooks in a folder? I Have about 52 workbooks in a folder and I like to place the links into another workbook so a user can open anyone they wish.
View 2 Replies View RelatedIs there a way to use a for next loop to open a workbook that is in a folder, then save and close the workbook then open the next workbook in the folder and do the same routine till all the workbooks have been updated?
View 12 Replies View RelatedA while back someone helped me out with a code to pull data out of all workbooks in a folder.
View 10 Replies View RelatedI have several workbooks in a make your day folder categorized under several sub folders. Each workbook has a macro that calls the following macro:
View 2 Replies View RelatedI have a macro that opens all workbooks in a folder and searches for a few terms returning the appropriate rows, my problem is that someone has decided to protect some of the sheets so when the files are opened you get the password box popup. I have added the (filename, readonly) segment however this has not solved the issue, the macro displays an error stating a workbook is open.
Is there any way to resolve this without unprotecting the sheets?
I am using this code to save all files in folder as CSV . I would like to add a letter to the beginning of file name for each file starting with a for file 1, b for file 2 etc.
Code:
strFile = Dir(mFolder & "*.xls*")
Do While strFile ""
Workbooks.Open mFolder & strFile
Range("D1").EntireColumn.Insert
[Code] .........
I have a series of workbooks created by my salesforce (from a master template that I created for them) which they then place into a folder for me to extract data and upload that data to SAP. I am writing a procedure, therefore, to do just that.
Essentially, I would like to open the file containing the data, extract what I need and then close it. I can do that. THEN, I want to move each data file to a folder (which would depend upon the data within the file) as part of the whole procedure. I can define the new path, but I don't know how to move the book.
In creating the master template of the data files, I built into it an auto-name-creation procedure which defines the name of the file that they create. This enables me to write a procedure to work out the file to open. In order to do this, I disabled the save function (but password protected it so that I could make changes to the master template). As such, I am unable to use Save/Save As to move the data files.
I have a large number of files (100+) contained in a directory with multiple subfolders that need to be made read-only at the end of an excel macro. Because of said length, I believe (open to correction) that the SetAttr method would not work (as I do not know the individual file names). It is also necessary to preserve all of the original files' other attributes.
View 7 Replies View RelatedI can find no code that actually works. It seems to me that there is a gap in the available functions.
I need to get a listing of files in a named folder, into Excel 2007.
I am looking for an VBA solution to copy value from multiple workbooks in the same folder.
The master workbook will contain two columns: a list of date (col A) and value (col B) copy from other workbook.
Those multiple workbooks have the same structure which contain a date (A1 cell) and number value (B1 cell)
Basically I want to perform
i) Date matching A1 value in individual work with master workbook
ii) If entry date is matched, then copy B1 value to column B in master book
I have a whole group of workbooks. Is there a way to make a new workbook that will look in the folder containing all of the other customer's books and pull information from them? In other words, I want a workbook where in Column A would contain all of the Customer's Names (Cell Info!G6), Column B would contain the Insurance Company (Cell Info!M14), etc. Is there a way to to that?
View 14 Replies View RelatedI'd like to create a macro which will
-go to a given folder
-open each of the workbooks in the folder, one at a time
-after opening the first wkbk, go to a specific cell address on the first tab of the wkbk
-paste in some values and formulas
-save the workbook
-open the next workbook, and repeat as above, for all workbooks in the folder
I have several workbooks in a folder with sub folders. How can I get the values located in C6,
E6 and E9 and put in a new workbook the "file name" in Ai and those 3 values in Bi, Ci and Di
respectively? Itīd be desirable get the values without open the files.
something like:
------A-----------B---------C----------D
Filename1.xls---13:11------13:57-----00:46
Filename2.xls---17:42------18:03-----00:21
.
.
Is there any code that can look at all the workbooks in a folder and add up the certain cell values? All the workbook's titles will change through time but all the workbooks only use sheet1.
Example: I want to add up cell Q45 from all the workbooks that exist in the windows folder. Is there vba code for this?
If i have 25 different workbooks in one folder is it possible to open/merge all 25 workbooks into one workbook without having to copy and paste each individual workbook.
Each workbook only has a sheet1. I hope there is it would save a lot of time
1. I have a large number of Test Suites that are large documents with 1 (visible) sheet w/ test cases, and 1 (hidden) sheet w/ validations. Test Suite is saved with a unique name (that follows a naming convention we've set up on this project: <Project>_<Test Suite Category>_<Location in Software>_< date>.xls
2. I need to create a master document in which i can run a macro that will copy each "test suite" sheet from each of these documents, insert it into the master doc, and sort the sheets by name. then it needs to present the data from all of the sheets on the main page of the doc, and break down the results by Test Suite Category, and Location.
Is this possible?
Can I create a macro that will import sheets from (potentially) hundreds of different workbooks, and then sort them appropriately?
I've been looking all over the place, and while i've seen macros that can import specific data, rows, or columns, i havn't quite seen what i'm looking for.
I have 51 workbooks that I would like to combine into one workbook. Each workbook varies in number of rows, but have the same number of columns. There are 31 Columns (AE).
Is there a fast way of doing this or will I have to cut and Paste?
I'm using this simple code found on ozgrid to open all excel files in a folder...
Sub OpenAllWorkbooksInFolder()
'''''''''''''''''''''''''''''''
'Written by www.Ozgrid.com
'Open all found Workbooks in specified folder
''''''''''''''''''''''''''''''''
Dim i As Integer
With Application.FileSearch
.LookIn = "C:Data"
'* represents wildcard characters
.FileType = msoFileTypeExcelWorkbooks
If .Execute > 0 Then 'Workbook exists
For i = 1 To .FoundFiles.Count
Workbooks.Open (.FoundFiles(i))
Next i........
I am having a bit of trouble with something i am trying to do in my Excel workbook (which we will call the home workbook). Basically what the home workbook does is opens a number of different Excel workbooks that are located in a certain directory. It then finds the first blank cell in on the worksheet "Data Import" ...the cell adress is stored in a variable called found. I need to utilize the values that are in certain cells of the workbooks that the home workbook is opening, but I keep getting a 'subscript out of range' error. I am almost positive it has something to do with accessing the other workbooks. Here is the code I've come up with (well parts of it that are relevant):
Dim found As Range
Dim strFile As String
Dim strPath As String
strPath = "C:directoryPath" 'amend directory as appropriate
strFile = Dir(strPath & "*.xls") ' amend extension as appropriate
Do While strFile <> ""
I have two hundred workbooks in a folder located at "C:ozgrid". I'm trying to extract the information in cell B9 in each of these workbooks and input them into a new workbook starting in cell A1 and continue on down through cell A200. Each workbook name begins with "Summary" and has the format of "Summary XXXXXX.xls".
View 2 Replies View RelatedAttached is a master metrics deck, where data needs to be refreshed every week, from two different workbooks.
The catch is, the two parent workbooks would be new versions every week (data would be same format, and style within), but file name would change each week, for eg: for 1st workbook, 'XXX_Weekly_Week24.xlsx' to 'XXX_Weekly_Week25.xlsx' and so on.
for 2nd workbook, 'YYY_Weekly_Week24.xlsx' to 'YYY_Weekly_Week25.xlsx' and so on.
In the master metrics deck, a consolidated vew of some of data from workbook 1 and workbook 2 is presented for each week.
This master file would remain same, and only be refreshed each week (preferably with a button on its sheet "REFRESH!!")
Next, need to manually change cells C2:G2 each week to reflect week titles correctly.
For e.g.: week6 would show week 1 through week 5, but during week7, it needs to show week 2 to week 6. Only last five weeks of data any given time.
The first datarows of each set are conditionally formatted (they are compared with other rows in the set and need to reflect danger values, good values etc) (I have done that already).
I have the following codes in which I am to refer a file and folder to do some further processes.
myfilename = "C:Documents and settingsacsMy DocumentsEntrymyfile1.xls"
folderPath = "C:Documents and settingsacsMy DocumentsEntry"
I want to enter these two paths in a sheet in my excel report file (For example, I am running the report from Report1.xls, in which there is a sheet name "Filepaths". In this,
in B5, I would like to enter the Filepath (B5 named as "FILEPATH")
in B6, I would like to enter the Folderpath (B6 named as "FOLDERPATH")
So that, if I am copying the folder to another area, I no need to change the code every time in the VBA editor. I can do changes in these cells and it will be taken as the path to run the code further.