I'm trying to put a border around a range and include the 3 rows beneath the last cell where data appears:
Range("A1:C1").Select
Range(Selection, Selection.End(xlDown)).Select
With Selection.Borders
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = 1
End With
I have a 23 sheets in a workbook and in each sheet i have around 1200 to 2500 data.
What i want is : from active sheet i want to open another sheet which is located at my desktop and should select column A, H & I all data (whether it is blank at last not to worry) and paste it into my active sheet in column A,B & C then i also have formula to calculate saving per shoe in column D,E & F.
For column D,E & F in active sheet the formula should fill down until the column A gets blank (For example : in column A,B & C under active sheet takes 1230 products so formula of the column D,E & F will end at 1230 row)
I have tried to record macro for the same but this is only for the restricted rows i.e. no. of row so I post it now.
I have approx 150 rows on my spreadsheet, but I am having difficulty viewing the bottom rows. The slider bar on the right hand side actually disappears on the bottom of the page. I am using windows 8. changed the tool bars and that worked, but I want to see the tool bars.
View 2 Replies View RelatedI have the following code which goes into three different worksheets and deletes the bottom row.
View 4 Replies View RelatedI am only using 581 rows in my worksheet. Excel's scrollbar lets me scroll down to 682...
I have tried everything from Google ranging from...
- Selecting all the blank rows, deleting them via right click menu
- Saving and re-opening the workbook
- Running pre-made macros, making my own macros
Quick way of inserting the same rows into the bottom row of different tabs, the difficultly comes as the bottom row of the other tabs varies. I.e tab 2 the bottom row is row 87, tab 3 the bottom row is 53 etc.
View 1 Replies View RelatedA common process is to select one or more entire rows. Is there a way wth VBA after working on the slected row or rows to have curosr drop below the last row and select just the next row eg. I selected entire row 1045 then when done the cursor will drop down one row and select row 1046. However, if on rows 1045, 1046 and 1047 that the cursor would drop down and select row 1048.
View 6 Replies View RelatedIs it possible to use the import external data function in excel to import only the bottom 1000 rows from a database? Right now I've only been successful at importing all the data but I only want the last x number of rows. The database is currently an excel file.
View 2 Replies View RelatedI have a TAB Named: Sheet18. I already set up the Header rows to print at the top of every page. Now I need to know how to set up to print the Footer at the Bottom of every-page the footer is A4804:Z4806, i need this rows printed at the bottom of every page when i print.
View 1 Replies View RelatedNote: Split from: VBA to insert page breaks at a blank with varying blck size
I would like my macro to add empty lines to each pages not completely filled. (you know when it removes a block from a page, there's always some free space at the bottom of that page) Is it possible to add blank row (from a certain template on another sheet that I have) until it's full?
I am attempting to write a macro so that when a user selects enters a particular selection in a cell, it will automatically move the entire row down to the last row and shade it in a different colour.
View 9 Replies View RelatedI've attached a dummy worksheet that shows constant values of 1.00 in columns D and E. In the actual workbook, user action will sometimes cause these values to change to something other that 1.00. The user may wish to delete the action that caused the change.
I need a macro that will search from the last cell in column D upward to the first instance of a cell that is not equal to 1.00 and select that cell and those immediately above with the same value as the first found cell.
For example, in the attached worksheet the search would start in the last cell of Columd D and search upward. It would find cell D23 and upward to D19. These entire rows would be deleted.
My spreadsheet has 600rows and the vertical scroll bar ends at row 459424. I have attempted to delete all of the extra rows by holding SHIFT and CTRL, striking the down arrow then right-clicking on the left margin of highlighted row numbers and choosing delete.
But the unwanted rows are still there and my vertical scroll bar is not correlated to the 600 rows.
I have used a formula to achieve this before which seemed to work although now it seems to be replacing other data already in the worksheet so I am unsure of how to fix, thinking I should just start again.
The file in question is a tracker of activities, Column A (sheet1) is the Status and once the status is "Closed" I need to run a macro that copies all closed activities to Sheet5 at the bottom of previous closed activities. Once this is done I already have a macro to delete all "closed" activities from Sheet1 meaning that it is vital the new closed activities stack onto the bottom of previous closed activities.
The Column Headers start on Row 11 with activities running from Column 12.
to be able to select every row, 1-3000, containing a value that will be typed into b2.
In other words, say I type 213 in b2, I need each row that contains 213 to be selected so that I can use those rows in another macro I have running.
I have recorded the following into a macro where the cursor returns from another workbook and wants to select from where it starts (Row 2) and where it ends (could be one row or could be several hundred) as it is to stop where it sees the next break (empty cell). The first set that is recorded happens to have four rows but could be one row up to several hundred. How can I have the cursor land and select the data if it is only one row, 10 rows or many more? There are more rows below the first group so once it selects and copies the data, the cursor should go to the next group and select the group before copying out again i.e once it copies the first four rows, the cursor will go to row 6 (there are two rows between each group) and select from row 6 to the bottom of that section which may be only row six or could be row 58 etc.
Range(Selection,Selection.End(xlDown)).Select
ActiveCell.Rows("1:4").EntireRow.Select
10.000 Rows have full of numbers in Cells.I have a Macro for each row.But I want to use this Macro for all Rows automatically.
View 5 Replies View RelatedI am trying to record / edit a macro in Excel Office 2003 that selects a cell (c6), then goes to the last cell to the right of that range which I am doing fine
Range("c6").Select
Selection.End(xlToRight).Select
What I do now is select from that last cell found in the range down to the last cell in that column and I am getting that to work OK
Range(Selection, Selection.End(xlDown)).Select
I now have a range of data on one column selected as the last column of data in a range. What I am having difficulty finding the solution to is how I can keep this range highlighted and include on the highlighted range the previous column of data as well (column to the left) - which would give me the last column of data (this months infomation so to speak) and the previous columns data as well (last months so to speak) - so I can then progress to copy paste to a selcted area - later I will add a new column of data so the last column and the previous one moves to the right every month so cannot select by specific cell references
I'm trying to analyse some data, consisting of a table with clients "checking in" at a certain restaurant at a certain time. In another table I have the restaurant data, including information on different discounts they offer on different days and at different times. If a restaurant offers distinct discounts for distinct days of the week (or hours), it will be listed several times. Now, for each check-in I'd like to know, how much money the client safed (all check-ins are within some of the discount hours of the restaurant they checked in at). If there were only one line per restaurant, VLOOKUP would do the task without any problem, however, as there are several rows per restaurant, I don't know how to look up the correct discount according to the date and hour the client checked in. I've attached a data sample.
View 1 Replies View RelatedLike say I have a column which begins with an indeterminate number of blank cells before there is an indeterminate number of cells with numbers or blanks in them. I need to leave the beginning blanks alone, and perform a sort on all of the rows below. How to code up a macro to do this, but I don't know jack about that, so I was wondering if there is some kind of function or conditional sorting I could record as a macro?
View 2 Replies View RelatedI have a very large worksheet with many dates entered. I want to be able to run a macro that prints all the rows that has a date less that 35 days ahead in the future. all the dates are mixed up and not in any order.
Is there a way i can do this?
How do I select all the Columns and Rows that are not being used so that I can hide them. I like the blue background it gives when they're all hidden. I am using Excel 2007 and it's not too bad selecting all the columns but there are just way too many rows.
View 3 Replies View RelatedI am trying to select the active row and the next 21 rows down, so in all 22 rows should be selected after the macro runs.
View 4 Replies View RelatedI need to create a new macro that will select all rows that have data and create a (3) pivot tables.
I have tried to create macros that will create a new tab and populate the pivot table. I keep getting an error that says "subscript out of range", so instead of creating the tab during the macro I have created the tabs as part of the template.
Again the problem is when running the macro with more rows, the macro doesn't recognize the additional rows. Ctrl + A is used during the macro but is hard coated for only the number of rows it selects, Ctrl + A twice is giving me "blank" data in the pivot tables. I have attached a sample sheet with 14 rows. Next month there may be only 10 rows or 50 rows. I have macros created for the pivot tables to view.
1: How can I create a macro to select all rows with data?
2: Can I create 1 Macro to create all 3 of the pivot tables needed?
3: Can the macro also create the tabs during the execution of the macro?
I need code that will look for a number in cell C1 and then it starts at C9
selecting cells to copy until it sees a cell with a number larger than what is in C1 and stops.
i need code for this since the number in C1 is always changing
Example: if there is an 18 in C1 it selects all cells that are >0 and <19
these cells are always sorted 123456........36 they are not random in order like 1 17 6 12 18 4 3
I am trying to select rows that contain text using a variable counting number of rows so rNumb = count number of rows
The Problem
Worksheets("Table").Rows("2:rNumb").Copy
rNumb won't work. What is the proper syntax?
macro to select the header and rows below till the next header is reached if column L is less than column J for the whole sheet which can be up to 5000 lines or more. Then copy all of those to a new sheet. Here is part of the spreadsheet for a visual:
Product number
Name
Name
Finish date
Planned Qty
Mfg U/M
Lvl
Component
Name
[code].....
Im trying to find a way select several rows at the same time but starting at say row 3 and then alternate rows so rows 3,5,7,9 etc
View 9 Replies View RelatedI have an excel sheet that contains different partnumbers, i have them sorted a-z in column D.
I want to select all rows that contain the same partnumber and copy them to a new workbook. And repeat this action for all partnumbers.
I want to be able to print individual rows from my sheet. When I try, they run onto a number of pages. The information needs to be printed along with the column headers to make sense. Is there a way I can do this and get the rows to 'wrap' to save paper?
View 9 Replies View Related