I need code that will look for a number in cell C1 and then it starts at C9
selecting cells to copy until it sees a cell with a number larger than what is in C1 and stops.
i need code for this since the number in C1 is always changing
Example: if there is an 18 in C1 it selects all cells that are >0 and <19
these cells are always sorted 123456........36 they are not random in order like 1 17 6 12 18 4 3
I want to filter my dataset, select column B & C to copy, but exclude the header row. I am having a hard time offsetting the selected range. I get a compile error on what I try.Here is my code (yes, I know, its a little juvenile and I will clean it up, but I need to see things clearer at first):
Sub GetBarrelQualifiers()
'
' GetBarrelQualifiers
[code]....
I'm trying to create a macro that will allow the user to select a range of cells, (in column V in the attached sample), and then insert a new worksheet and copy the entire row where the user selected the cells to that worksheet.
For example: (I've deleted most of the data from the sample). The user want to create an order that has an exteded cube of 300 feet. By holding the "Ctrl" key down, they could pick and choose the parts they want to add, until the sum in Excel shows nearly 300.00 extended cube. They would then run the macro, which would copy only the rows which the user has selected in column V to the new worksheet.
I have some selected cells in column A, they are not consecutive. I would like to copy these values and then copy the same area but from a different column...
The code I have here is only working when I have a consecutive selection.
Code:
Set rng = Selection
fr = rng.Cells(1, 1).Row
lr = rng(rng.Count).Row
rng.Copy
I have a workbook made up of 10 worksheets or so. Each of the rows in each worksheet includes the age of a case in column H. I want to copy the rows that show a case that is over 90 days of age, I then want to paste these into another worksheet. I want to do this for each of the ten worksheets.
View 6 Replies View RelatedOk I recently ran into something in Excel that was completely unexpected. When I filter data, and select multiple rows of data, and copy and paste it.... it pastes the unfiltered rows as hidden rows! Is there a way around this without copying row by row?
View 1 Replies View RelatedI need a code that will copy the format AND formulas of the entire row that I have selected (or activatedwith my cursor) to each and every blank row - until it gets to the last row of data on this spreadsheet.Since any employee could have more than 1 row of data - I am using a code that inserts1 blank row after each NEW employee name.
NOTE: This report is initially sorted by employee name so that each occurrence is grouped together.REPORT SPECIFICS:1) This report reflects typical paryoll information.2) Certain columns have data that is either in text, general, or number ($) format3) The number of columns may vary depending on which PR report is being worked4) For the sake of simplicity - we can assume that the column titles will always be across row 15) Each employee name on this report may repeat several times depending on how many weeks they worked,so the SUM() formula should adjust automatically to capture all the rows of data to add up for each employee
HERE IS MY SPREADSHEET:
texttexttexttexttextformulaformulaformulaDeptDivEmployee NameEE#Period EndHrs WorkedPTOAccrd LiabilityCSDINSEWilma Wilsont4561/7/1280.5$ 100.00 CSDINSEWilma Wilsont4561/16/12121$ 200.00 CSDINNECage Nick2581/7/1281$ 600.00 CSDINNECage Nick2581/16/12245$ 25.00 CSDINNECage Nick2581/23/12323$ 25.00 CSDINWPolly Cracker1781/7/12856$ 60.00 CSDINWPolly Cracker1781/16/12242$ 654.00 ARVIPWPolly Cracker1781/23/12322$ 2.00 ARVIPWPolly Cracker1781/28/12161$ 5.00 ARVIPWPolly Cracker1782/6/1284$ 3.00 CSDINSEDim Sum6871/7/1284$ 65.00 CSDINSEDim Sum6871/16/12126$ 5.00
HERE IS MY CODE TO INSERT 1 ROW
Sub InsertRowAtNewNameONE()Dim LR As Long, i As LongLR = Range("C" & Rows.Count).End(xlUp).RowFor i = LR To 2 Step -1If Range("C" & i).Value Range("C" & i - 1).Value Then Rows(i).InsertNext iEnd Sub
NOTE: See below: I will format and add formulas where I need on the 1st blank row that was createdand I need a code that will copy this particular row to all blank rows to the last.
recordtexttexttexttextcountformulaformulaformulaDeptDivEmployee NameEE#Period EndHrs WorkedPTOAccrd LiabilityCSDINSEWilma Wilsont4561/7/1280.5$ 100.00 CSDINSEWilma Wilsont4561/16/12121$ 200.00 2201.5$ 300.00
I have a base document that i can import another data document with a button (this is working).
I then have another WS ("search") in the base document with lots of identifiers which I want to use as my search range to look through the document that I just imported (column A).
I need a msg to ask the user what month they would like to find the $ value on (Ie, January) in the imported WS... this way it doesnt copy the entire line only cell in the selected month column.
Then I want to the user to be able to click a button that will check through the identifiers on the "search" WS and if the same identifier appears in the imported WS in column A, then for the $ value in the column selected to be copied to the search Range work sheet.
If the idenfifier is not matched then in place of the $ value copied can be the string "no in XXX WS" .
I have attached the document with dummy data in each work sheet with details more cleary what I have meantion above.
to be able to select every row, 1-3000, containing a value that will be typed into b2.
In other words, say I type 213 in b2, I need each row that contains 213 to be selected so that I can use those rows in another macro I have running.
I have recorded the following into a macro where the cursor returns from another workbook and wants to select from where it starts (Row 2) and where it ends (could be one row or could be several hundred) as it is to stop where it sees the next break (empty cell). The first set that is recorded happens to have four rows but could be one row up to several hundred. How can I have the cursor land and select the data if it is only one row, 10 rows or many more? There are more rows below the first group so once it selects and copies the data, the cursor should go to the next group and select the group before copying out again i.e once it copies the first four rows, the cursor will go to row 6 (there are two rows between each group) and select from row 6 to the bottom of that section which may be only row six or could be row 58 etc.
Range(Selection,Selection.End(xlDown)).Select
ActiveCell.Rows("1:4").EntireRow.Select
10.000 Rows have full of numbers in Cells.I have a Macro for each row.But I want to use this Macro for all Rows automatically.
View 5 Replies View RelatedI am trying to record / edit a macro in Excel Office 2003 that selects a cell (c6), then goes to the last cell to the right of that range which I am doing fine
Range("c6").Select
Selection.End(xlToRight).Select
What I do now is select from that last cell found in the range down to the last cell in that column and I am getting that to work OK
Range(Selection, Selection.End(xlDown)).Select
I now have a range of data on one column selected as the last column of data in a range. What I am having difficulty finding the solution to is how I can keep this range highlighted and include on the highlighted range the previous column of data as well (column to the left) - which would give me the last column of data (this months infomation so to speak) and the previous columns data as well (last months so to speak) - so I can then progress to copy paste to a selcted area - later I will add a new column of data so the last column and the previous one moves to the right every month so cannot select by specific cell references
I have a list of invoice #'s on a sheet named "Temp Sheet".
I have a VBA macro that created a new tab for each entry and named it the invoice #. So basically the vba code created a new tab ( based on the number of invoice #'s on my list ), and named each tab an invoice number. So if I had a list of 10 invoice #'s, named S1-S10, the vba code created 10 tabs, named S-1, S-2,. S-3.....
Now to my question.
I have a template sheet I want to copy from ( "Template" ), and select any sheet that starts with "S", and copy/paste this template to.
I'm trying to analyse some data, consisting of a table with clients "checking in" at a certain restaurant at a certain time. In another table I have the restaurant data, including information on different discounts they offer on different days and at different times. If a restaurant offers distinct discounts for distinct days of the week (or hours), it will be listed several times. Now, for each check-in I'd like to know, how much money the client safed (all check-ins are within some of the discount hours of the restaurant they checked in at). If there were only one line per restaurant, VLOOKUP would do the task without any problem, however, as there are several rows per restaurant, I don't know how to look up the correct discount according to the date and hour the client checked in. I've attached a data sample.
View 1 Replies View RelatedLike say I have a column which begins with an indeterminate number of blank cells before there is an indeterminate number of cells with numbers or blanks in them. I need to leave the beginning blanks alone, and perform a sort on all of the rows below. How to code up a macro to do this, but I don't know jack about that, so I was wondering if there is some kind of function or conditional sorting I could record as a macro?
View 2 Replies View RelatedI have a very large worksheet with many dates entered. I want to be able to run a macro that prints all the rows that has a date less that 35 days ahead in the future. all the dates are mixed up and not in any order.
Is there a way i can do this?
How do I select all the Columns and Rows that are not being used so that I can hide them. I like the blue background it gives when they're all hidden. I am using Excel 2007 and it's not too bad selecting all the columns but there are just way too many rows.
View 3 Replies View RelatedI am trying to select the active row and the next 21 rows down, so in all 22 rows should be selected after the macro runs.
View 4 Replies View RelatedI need to create a new macro that will select all rows that have data and create a (3) pivot tables.
I have tried to create macros that will create a new tab and populate the pivot table. I keep getting an error that says "subscript out of range", so instead of creating the tab during the macro I have created the tabs as part of the template.
Again the problem is when running the macro with more rows, the macro doesn't recognize the additional rows. Ctrl + A is used during the macro but is hard coated for only the number of rows it selects, Ctrl + A twice is giving me "blank" data in the pivot tables. I have attached a sample sheet with 14 rows. Next month there may be only 10 rows or 50 rows. I have macros created for the pivot tables to view.
1: How can I create a macro to select all rows with data?
2: Can I create 1 Macro to create all 3 of the pivot tables needed?
3: Can the macro also create the tabs during the execution of the macro?
I am trying to select rows that contain text using a variable counting number of rows so rNumb = count number of rows
The Problem
Worksheets("Table").Rows("2:rNumb").Copy
rNumb won't work. What is the proper syntax?
macro to select the header and rows below till the next header is reached if column L is less than column J for the whole sheet which can be up to 5000 lines or more. Then copy all of those to a new sheet. Here is part of the spreadsheet for a visual:
Product number
Name
Name
Finish date
Planned Qty
Mfg U/M
Lvl
Component
Name
[code].....
I'm trying to put a border around a range and include the 3 rows beneath the last cell where data appears:
Range("A1:C1").Select
Range(Selection, Selection.End(xlDown)).Select
With Selection.Borders
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = 1
End With
Im trying to find a way select several rows at the same time but starting at say row 3 and then alternate rows so rows 3,5,7,9 etc
View 9 Replies View RelatedI have an excel sheet that contains different partnumbers, i have them sorted a-z in column D.
I want to select all rows that contain the same partnumber and copy them to a new workbook. And repeat this action for all partnumbers.
I want to be able to print individual rows from my sheet. When I try, they run onto a number of pages. The information needs to be printed along with the column headers to make sense. Is there a way I can do this and get the rows to 'wrap' to save paper?
View 9 Replies View RelatedI have a macro to search column E for an occurance of the text ALPHA,(there is more than one occurance of the text, so I'm using a loop to search for the next occurance,once the first one is found. No problems there).
Once I find a Row that contains ALPHA( say Row 15), I want to Copy the columns A15:R15 (NOT the EntireRow).
how I can Copy only a Range of Cells and not the EntireRow?
I have this code that selects the correct range of data, but does not copy.
Is the syntax correct?
With Sheets("ABC2")
.Activate
.Range(.Cells(FR, 8), .Cells(LR, 21)).Select
Selection.SpecialCells(xlCellTypeVisible).Select
Selection.Copy
End With
I'm in charge of taking a report; streamlining its functions; and automating future reporting.
I'm using a database and some of the reporting function Access has. For another variation I'm forced to export the query to excel and transpose the vertical layout horizontally.
I'm making the entire process automated via a macro. The code is too long to post in its entirety but here is an example of what I'm trying to accomplish:
I have a spreadsheet with employees and data listed. The drop-down in A1 lets someone select the employee and then it hides the rows for all other employees. I want to add the names of supervisors in the drop-down of A1 and have it select only the employees under that supervisor and hide the rest. The number of employees under each supervisor ranges from 3 to 6. This is what I have to hide the rows when selecting a single employee :
[Code] .........
My workbook has stats data on the "Master" sheet(sheet #1) and analysts and supervisors on "Analysts" sheet(sheet #12). Data validation for cell A1 on "Master" sheet has all the analysts and supervisors in the first column of "Analysts" sheet with title "Select Analyst" in cell A1. I modified the "Analysts" sheet to show supervisors from B1:I1 and listed the analysts in the appropriate columns below them. Not sure how to make it select the analysts when someone selects the supervisor on "Master" sheet .
I have a range of data that is sorted (about 20,000 rows). In about 15,000 of these rows column D will contain a generic text string. How do I select the entire row where the generic text string appears in column D?
View 3 Replies View Related