I'm trying to make my vLookup select multiple cells and sum them in one cell
For example
Name
No.
Example1
1
Example1
1
Example 2 2
Example 2 3
The Vlookup would return the value of 2 for example 1 and 5 for example 2
I think I am surrounded by trees and can't find the forest, I have a list of tariffs and need to get them to a generic name. The attached file may help, the gist of it is I need to output the generic name for each tariff instead of the supplier name for that tariff.
View 11 Replies View RelatedI have four cells that contain text. All have connected check boxes with TRUE FALSE.
I need to be able to select anyone one of these cells with a check box, and have it's text appear in one separate cell eg: A1.
I have no issue connecting check boxes etc. I have no issue reproducing the text from any of these cells into multiple cells with a check box. But they have to be selectable and reproducing in one cell only (eg"A1").
I would like a macro that select all cells based on multiple criteria. It's a big sheet, but I've made it smaller in the following example.
In row 1, there are 2 headers, in B1 (electricity) and C1 (gas) In column A, there are 3 houses, in A2, A6 and A10. The blocks of cells in between (e.g. B2:B5) have 2 headers, 'period' in B2, and 'account number' in B4. B3 and B5 have a list of options in them.
I want to select cells that meet certain criteria. Either electricity or gas, and either period or account number. So, if in cell D1 I choose electricity and in D2 period, I would like to select B3, B7 and B11. If I choose gas and account number, I wish to select C5, C9 and C13.
Is it possible to select cells with conditions below using formula only?
Yes, VBA is easier, but I want to know if this is possible using formula.
1. selected cells (requested): A1, A3, A6, A10, A15 .... total 20 cells.
2. the increasement between them are: 2, 3, 4, 5, 6, 7, 8 ,,,,
So for example if I have a1, a5, and a6 selected, I want to be able to select row 1, 6, and 7 in one action. Is there a hotkey for this, and if not what macro could I use?
ActiveCell.EntireRow.Select only gives me one row. I want to be able to select all of them at once.
I'm trying to write some code to select cells in a number of columns on a variable row. I have the following code to define the rownumbers for Cash and Pal:
Columns("G:G").Select
Selection.Find(What:="Total Cash", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
[Code]....
Then I can use the following code to select a cell in a single column:
Range("P" & Cash & ":P" & Pal).Select
but I need to select cells in columns P, R, T, V, X, etc.....
If I was doing this for a fixed rownumber I would use:
Range("P22:P23,R22:R23,T22:T23,V22:V23,X22:X23").Select
but because my rownumber is variable I tried to use:
Range("P" & Cash & ":P" & Pal, "R" & Cash & ":R" & Pal, "T" & Cash & ":T" & Pal, "V" & Cash & ":V" & Pal, "X" & Cash & ":X" & Pal).Select
but this doesn't work giving the Compile error: Wrong number of arguments or invalid property assignments
I would like to select say 2 id from sheet1 and 2 names from sheet 2 randomly and copy to sheet3, to cells a and b,have seen various codes but none seem to fit the bill.
View 3 Replies View RelatedI need a formula to look up an ID# from one sheet and return the sum of all cells (in another column) that have the same ID. I have security a security ID number and have a list of all holders of that security, but I need to sum the total value and total shares for a firm wide report.
View 2 Replies View RelatedI need to do a spreadsheet that calculates sales tax based on state and.or city:
The sampling of the sheet looks like: ....
=VLOOKUP(C4,'Named Fields'!AH3:AM116,6,FALSE)
I have the above formula set in a workbook.
I have sheet 1 with my main information.
I have sheet 2 with all my directives.
sheet 1 contains:
cell c3= client
cell c4= project
The vlookup I have entered in cell c5 is to return a job number based on the
project in cell c4 which is listed on sheet2.
Problem is, I have multiple projects named the same. They're under different
clients.
I found a post that said I could use:
=vlookup(C3&C4,'Named Fields'!AH3:AM116,6,FALSE)
But that didn't work.
Is there any way to have vlookup find what's in cell C3, then proceed to
cell C4 to returns the results in the 6th column?
I would like to select all cells in column A that begin with the text "SP". Some cells will be contiguous but others will not. For instance in one case, I would like the macro to select cells with the text "SP" which would result in cells A1, A2, A3, A10, A15 being selected. I am working on building a macro that will then do other things to these cells/rows so this is the first step.
The below code will select the first cell with "SP". How would I alter this code to only search Column A and select multiple cells? or totally different code.
Code:
Sub test()
Dim r As RangeSet
r = Cells.Find(what:="SP", LookIn:=xlValues, lookat:=xlWhole)
If Not r Is Nothing Then r.Select
End Sub
I am trying to create an automated receipt for a list of artists. I have given the artist an individual reference so I am doing a VLOOKUP to return description/price value etc but I can only get it to return the initial value and I have approx 10-15 works under each reference. Maybe VLOOKUP is the wrong formula to use.. I have attached the file.
View 5 Replies View RelatedI have a matrix with numbers that each cell is composed by a function of two parameters (two columns). The formula is
"=COUNTIFS(T2:T99,"15",V2:V99,"14")",
So it's counts when in one cell column I receive 15 and in the other 14. For instance, I receive the number 3 - so I have three rows that match (the first column with 15 and the second with 14).
I want, when I select the cell from the matrix (table) with the number 3 (that I receive from the formula) it will highlight the relevant rows..
I have a list box, that I have set MultiSelect to "1 - frMultiSelectMulti"
What I would like to be able to do is select multiple items and have those items appear in a single cell on my spreadsheet.
Maybe something like: WA, CA, OR Forms.ListBox.1 is the name of my object. Or do I need to use a different object type?
I have a column where each cell contains the names of a variable number of worksheets in the format ["sheet1", "sheet2", etc. ] without the brackets but with the quotation marks. I would like to have some code that will select all of the sheets mentioned in a given cell. I found lots of threads about selecting an individual sheet based on a cell, but none about selecting multiple sheets. If it is easier, I can change the format of of the cells, or break each cell out into multiple cells in a given row. The best code I could come up with was
Sub Selects()
Dim strSht As String
Sheets("Criteria").Select
strSht = ActiveSheet.Range("L31")
Sheets( Array(strSht)).Select
End Sub
I'm running a pretty huge database with Part Numbers across several Suppliers which fluctuate constantly.
For example: a HEXAGONAL BOLT may have a Part Number ABC123, but depending on the size of the bolt it could be a ABC123-001 ABC123-V28 ABC123-40mm (etc)
There's a lot of data (some of it sensitive) so I don't want the users to see everything - I'm creating a front-end sheet and am looking for a way for a user to type in the Part Number "ABC123" into cell A1, then the Pivot below to auto-update (with Part Number on the 'Report Filter') to show all variations of ABC123, including ABC123-1 ABC123-2 etc - i.e. not an exact match; everything that contains the characters in cell A1.
The relevant information has been ported in and password protected on a sepearate sheet within the workbook, so it's literally a code to make the cell value affect the filter.
I am having trouble getting the selection of sheets to work. I have a workbook that has multiple sheets and one constant sheet (Summary). There is code to create new forms in this workbook and insert them after the Summary sheet. These forms all have a date input that is formatted as a date (mm/dd/yyyy), these dates get modified on the day the form is created, there may be any number of sheets created during this process. I have to print the summary sheet and only the newest forms created. I need a code to select sheets to print based on the date input of a user for each form. This is what I have so far:
VB:
Dim i As Variant
i = Range("B5").Value >= InputBox("What date to start PDF from? Format = mm/dd/yyyy")
Sheets(Array("i")).Select [code]....
If the dim can be taken out and just included in the line for the array that would be fine with me. The cell "B5" is where the date is located in each form. I want to input a date and the macro will select the sheets where the date is equal to and greater than the date entered. The Summary sheet will always be included in the print set. I have a dialog box for setting which printer to use - this file will be used at different offices and therefor the printers will be different and it will also allow to create a PDF if desired.
I have a validation list drop down box set up to reference data in a defined name list. I would like to be able to select multiple values from this list to appear in one cell (preferably separated by a comma). For example, the defined name list contains the following data:
Choice 1
Choice 2
Choice 3
Choice 4
I would like to be able to populate one cell with the following via the drop down list: Choice2, Choice 4
Is this possible and if so, how?
vlook up.xlsx
View 14 Replies View RelatedI want to vlookup a cell's value from multiple files, how to go about vlookup a directory (about 2000 files)?
* The cell's entry name is the same as the file's name saved in the directory.
* I do not know marco
I’d like to copy a range of cells: (A1 – A4) and paste them into Cell A5, but here’s the rub: I would like the values after I paste them to be separated by commas.
View 9 Replies View RelatedI tried searching for a solution to my formula problem in this forum regarding vlookup and saw similar formula e.i returning multiple values but it doesn't cater with what I need.
Vlook is returning only the first value but what I need is to return all the multiple return values in 1 cell. I've attached a sample worksheet for reference.
OK for example if i hae this list of data:
Invoice number Order number
111 560
112 561
112 562
113 563
What i need to do is a vlookup from the above table to return the following:
Invoice Number Order number
111 560
112 561, 562
113 563
Traditionally the vookup will return the first value it can match. I can return multiple values on different lines using an array formula but this is not useful.
In the example below I have table array A1:B8. Lookup criteria in cell A11 and want to return MULTIPLE values from column B in cell B11.
I would prefer to not use VBA if possible
A
B
1
[Code]....
I am trying to get one cell to look at different sheets. if the first sheet doesn't have a value, than look in the next sheet. current formula is
=IF(ISNA(VLOOKUP(Q2,'sheet2'!$D$2:$K$1807,7,FALSE)),"",VLOOKUP(Q2,sheet2'!$D$2:$K$1807,7,FALSE))
I am having cell return blank if no value is found. it is currently looking only at one sheet.
I don't want it to combine the values like this formula does.
=(VLOOKUP(Q2,'sheet3'!$D$2:$K$200,7,FALSE)&","&VLOOKUP(Q24,'sheet2'!$D$2:$K$1807,7,FALSE)) #.###,##.##
sheet 1 is where the cell I am writing the formula is in, and I want to look in sheet 2, 3, and possible 4 for a value, I want to only have the greatest value show between the sheets. is this possible.
I am using excel2007.
I have a column with rows from 41:254, the first cell contains a word, and the next is blank, and this repeats the whole way down.
a previous macro i run changes one of the cells in the range (one of the ones containing a word) to a number value, i want to write a further macro to select this cell that has now changed. when it changes it will be the only cell in the range with a number in.
What I need is a script or formula with returns multiple results and puts them into one cell.
The Excel is used as a Project Managment Work Sheet for Resources, working on different Projects and their dedicated hours
The raw data table looks like this:
Column A: Project Name (=AllProjectsLists)
Column E: Resource Name (=MasterDataResources)
Column P: values from 0 to 8 (hours)
First I need to check per row the Resource Name. If the Resource Name is a match, than I need to check if in column P the value is bigger than 0. The result goes into a different sheet per row, one result per Resource, but the multiple results should be shown in one cell.
So the result should be something like:
Resource name "Thomas" .... Projects working on: "Project 1, Project 5, Project 13, ..." (in one cell)
Resource name "Mary" .... Projects working on: "Project 3, Project 9, Project 13, ..." (in one cell)
I tried with this one, but it only returns one vale per cell:
=SMALL(IF(E$9=MasterDataResources; ROW(MasterDataResources)-ROW($A$2)+1), ROW(1:1))
=INDEX(AllProjectsLists; SMALL(IF(E$9=MasterDataResources; ROW(MasterDataResources)-ROW($A$2)+1); ROW(1:1)))
I built an Excel Macro to pull information from my schedule and compile it within another Worksheet. The Macro below searches for an instance of "Unavailable" and then populates my Data Worksheet with the WeekDays (ie: M-W-F or ALL Week), the Details (ie: Vacation or Training) and the Name of the employee. I struggled with a way to populate my employee name as "unavailable" isn't always offset by the same amount of characters to employee name (as it is with WeekDays and Details). Instead, I collected the row in which "Unavailable" was found.
I used the Vlookup function to populate the number of Absences and it worked swell.
=VLOOKUP(C2,O:P,2,FALSE)
C2 is populated with Weekdays (ie: ALL week or M-W-F)
O contains a list of possible day combinations
P contains the number of days
I hoped to use a similar function to populate my employee names. This didn't work well a 'tall.
=VLOOKUP(A2,L:M,2,FALSE)....................
Converting old reports to usable excel format. I am having trouble using VBA to set up a looping macro that would search Column A for cells with the text string: "ACTIVITY TOTAL". If cell has that value I would like to perform text to column action on the adjacent cell (R0C1). The macro recording for the test to column settings i need is :
Selection.TextToColumns Destination:=ActiveCell, DataType:=xlDelimited, _
TextQualifier:=xlDoubleQuote, ConsecutiveDelimiter:=True, Tab:=False, _
Semicolon:=False, Comma:=False, Space:=True, Other:=False, OtherChar _
:=":", FieldInfo:=Array(Array(1, 1), Array(2, 1), Array(3, 1), Array(4, 1), Array(5, _
1), Array(6, 1), Array(7, 1)), TrailingMinusNumbers:=True
I have attached a sample of what I am currently working with. The actual file has roughly 6000 lines of data, so I would like the macro to go through all lines.
Attached File : LoopingVBA.xlsx‎
