I have a list box, that I have set MultiSelect to "1 - frMultiSelectMulti"
What I would like to be able to do is select multiple items and have those items appear in a single cell on my spreadsheet.
Maybe something like: WA, CA, OR Forms.ListBox.1 is the name of my object. Or do I need to use a different object type?
I'm running a pretty huge database with Part Numbers across several Suppliers which fluctuate constantly.
For example: a HEXAGONAL BOLT may have a Part Number ABC123, but depending on the size of the bolt it could be a ABC123-001 ABC123-V28 ABC123-40mm (etc)
There's a lot of data (some of it sensitive) so I don't want the users to see everything - I'm creating a front-end sheet and am looking for a way for a user to type in the Part Number "ABC123" into cell A1, then the Pivot below to auto-update (with Part Number on the 'Report Filter') to show all variations of ABC123, including ABC123-1 ABC123-2 etc - i.e. not an exact match; everything that contains the characters in cell A1.
The relevant information has been ported in and password protected on a sepearate sheet within the workbook, so it's literally a code to make the cell value affect the filter.
I am wanting to create a list where I can select multiple items within that list and then print only those selected items. I have created something similar thru data validation, but I can't get it to print.
In addition, I would like to be able to subdivide the list into multiple categories, then select items from these multiple categories and print them.
I am new to writing macros and am wondering what is the easiest way to create a drop down and select multiple items separated by comas. The people who are going to input data into this spreadsheet are field people and not technically savvy so need to design something that is just a matter of cliking on the drop down and selecting multiple items and they should show on the same cell separated by commas.
View 9 Replies View RelatedI'm trying to write a macro to select the multiple sets of the same data for several PIVOT tables. I've tried Slicers but it seems that this takes up too much processing power and always times out.
My workaround is to do a macro that picks out the said data, however when i do the below, plus another 4-500 lines i get told that there are too many line continuations
Code:
ActiveSheet.PivotTables("PivotTable6").PivotFields( _
"[Postal District].[Postal District].[Postal District]").VisibleItemsList = _
Array("[Postal District].[Postal District].&[AB11]", _
"[Postal District].[Postal District].&[AB12]", _
[Code] ...
What I'm looking to do is express all the postcodes in one line or at least multiple post codes in one go, this is what I've tried:
Code:
"[Postal District].[Postal District].&[AB12].&[AB13]"
and
Code:
"[Postal District].[Postal District].&[AB12,AB13]"
But to no avail.
I have created a DAta Validation List and it only select one item. I want it to select as many items that is on the list but i can't get it to work for my main worksheet I am working on. I can't figure out why I can't get it to work for the work sheet "This Don't" but it works for the worksheet "This Works" why and how I can change it so both Reason (Column F and H can) select mutliple items on there. Data Sheet.xlsx
View 2 Replies View RelatedI watched a video on youtbe. And the women had three or four items in drop down box. She was using vba. When i emailed her to ask her how she did this, she kept telling me to go to her website and i was supose to figure it out on my own. I am trying to do a start up construction company. the link to her site is as follows Select Multiple Items from Excel Data Validation List - YouTube the idea of what i want to do, is how she clicks on a word and it follows in the coloumn to the right going down. This is what i need to know how to do. It is probably pretty elementary to many of you. But i build, i know how to read prints, to cut footprints for new homes etc. But when it comes to excel i am so green.
View 2 Replies View RelatedI am importing some text files into an excel worksheet. I want to change the format just a little bit. For each date I have 5 rows (pixel: 25, 37, 50, 100, and 200). When I import my data the date is in the same row as my pixel numbers. I want to place the date in another column to the left of these pixel numbers.
Below is an example of my "spreadsheet" The first 5 lines (with date "2008_308.txt" next to each pixel number is what I want it to look like and the next (with date "2008_309.txt" is how it is imported with only one date above the pixel numbers. I could do this manually, but I have many years of data to import. And would like a way to kind of copy/paste these multiple items at the same time. Any ideas? .......
I'm trying to use a List Box to select multiple items on my Pivot Table but I can't seem to get it to work. Its the Report Filter part of the pivot table.
When the list Box is set to fmMultiSelectSingle it work and selects the indivdual items, but I need it set as fmMultiSelectMulti for if i'm also needed to select multiple items. (which doesn't seem to work!)
changing two variables a various amount of times and running the same procedure and copying the resutls into another sheet. Seems like a perfect place for a macro. However, these variables can be chosen from a list that the user wants. So why not build in a listbox for each one. Now I have two listboxes one for variable A and one for variable B.
The procedure in theory goes something like this we change variable A from the base case and then run the procedure for variable B, get the results, then run the scenario again but changing only variable B abnd repeat. Then once, all of the variable B scenarios are done, I want to change the variable A and then repeat and so forth.
That is the background and my main problem at this point, is that have these values in two listboxes, I know how to do the for each loops and such, however, I do not know how to do them for values in the listbox.
How do I identify the values selected in the respective listboxes and then pull them so I only use them for the for each loop?
I need to count the total number of times 4 different values appear in a column. This formula works for one value:
=COUNTIFS(Source!$C:$C,$B5,Source!$J:$J,$L$3,Source!$L:$L,$H$1)
Where H1 contains the word Assigned. I need to also find and add to count for matches in I1,J1 and K1 which contain New, Pending and Work in Progress respectively.
I am making a worksheet that I intend to use to track my money. When I first open the worksheet, it opens on a tab where I can click a button to report a type of transaction. For example, if I make a withdrawl from the bank for $50, I click the button, it takes me to the sheet that tracks my bank-related stuff, selects a cell and opens up a form, at which point I type in what the transaction consisted of. However, the sheet also tracks what is in my wallet, so I'd like to finish reporting the bank transaction in the form, and have a button to click that reports the wallet part automatically.
So, essentially what I need to do is select several non-contiguous cells that are in the last row of the bank sheet, copy them, switch to the wallet-tracking sheet, and paste them in a row that is one past the last row of that sheet. The paste should keep the cells next to each other, even if they were non-contiguous when they were being copied.
I was planning to do was have a macro where the document opened and the cell that information was pasted in was decided depending on which cell was selected when the macro was run.
This worked fine, but it does mean that it needs someone who can edit the VBscript every time there is a new starter or someone leaves so isn't really viable.
What I was wondering, is if it is possible for me to start a macro, which then drags in the information I need from a text file, does all the calculations and rearranging, and then brings up a prompt for the user to open the document they want to paste it in, click on the cell where the pasting will start, and then the macro continues from there?
To try to explain it in as clear a way as I can. Say we have three managers, Alan, Brenda and Charlie. In Alan's team there are 10 staff members. Aaron, Bill etc.etc. If we have just run the report for Aaron, the macro will run, automatically drag all the information in and rearrange it, then it will pause while the user opens up the "Alan" spreadsheet, they select the "Aaron" first cell, click OK or something, and then the macro continues on its happy way?
I would like to select cell A6 after pasting a large range so that when send to user the entire range is not selected. I tried
wsDestPage.Range("A6").Select
And
wsDestPage.[a6].Select
I receive
Select method of range class failed
How can I select a single cell after pasting the large range?
i need a method to find the end value in a row (right side) and select the empty cell to its right to paste data in.
problem is the row where this data is may change so using
limit = (row, col).end(XlRight).Col
Is it possible to restrict the values of cells in a particular column to entries defined in a list BUT to allow each cell in that column to display multiple items from the list (seperated by a comma for example). I've attached an example of what I would like to do -
In Sheet "2010 Data" I want to be able to select multiple values in column F....(the values are defined within the list named "Platforms" on the worksheet called "Lookups"
I have two workbooks. I am copying cells data from one workbook A to workbook B with macro - pretty easy. Now, after selecting and copying cell data in workbook A and switching to workbook B I want to be able to pause the macro and wait for the user to chose a correct cell where he/she wants to paste the data. After the selection the macro would automatically paste the data in selected cell. Since I am completely newbie any help would be appreciated. Here is the macro I have so far :
Sub CopyVIN()
'
' CopyVIN Macro
' Macro recorded 5/26/2009 by Pacific Coachworks
'
Sheets("Sheet1").Select
Range("G9:R9").Select
Selection.Copy
Sheets("For copying VIN").Select
Range("A1").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("A1").Select
Application.CutCopyMode = False
Selection.Copy
Windows("Cami's Production Schedule.xls").Activate
' Here I'd like to have a code for waiting for a user selection and pasting the data automaticlly.
End Sub
I have columns (1-7) containing values of time these columns are labelled G,R,A,S,D,B,T by 850 rows (which are locations/jobs)
The next set of columns (1-7 determins what week the work takes place) so you will get a G in a cell or GR etc.
I would like a formula to work out the sum of the time columns by the code in the corresponding cell - I am stuck!
Seantc example.xlsx
I'd like to generate a total sum based on the quantity from each item. So columns H3 - N3 should generate a total in P3 (skipped O) by the quantity entered in each cell. In addition I'd like the value of D3 to change the pricing in the formula. D3 has a drop down with 3 products, so selecting ANY of those products should cancel out the previous formula and replace it with another.
This is the sum without a value in D3
=SUM(H3*10.00)+(I3*8.00)+(J3*6.00)+(K3*18.00)+(L3*10.00)+(M3*8.00)+(N3*8.00)
IF D3 has a package selected from the drop down, I'd like this sum to generate instead.
=SUM(H3*8.00)+(I3*6.00)+(J3*4.00)+(K3*15.00)+(L3*8.00)+(M3*6.00)+(N3*6.00)
[code]....
I want to sum up data for two periods (4&5) from a pivot table using GETPIVOTDATA formula. I've only been successful when I manually type the period values 4 and 5 as is shown below:
=IFERROR((SUM(GETPIVOTDATA("Amount",'Transaction Pivot'!$J$3,"Period",{4,5},"Project",$A7,"Category","T&M"))),0)
However, I cannot get the formula to work when I substitute cell references for the period values 4 and 5. Therefore, the following formula does not work:
=IFERROR((SUM(GETPIVOTDATA("Amount",'Transaction Pivot'!$J$3,"Period",{E5,E6},"Project",$A7,"Category","T&M"))),0) where E5 has 4 in the cell and E6 has 5.
Could the code be modified that if BSPT were selected only certain thread sizes would be shown in the combobox as the sizes below.
1/16"
1/8"
1/4"
3/8"
1/2"
3/4"
1"
1 1/4"
1 1/2"
2"
2 1/2"
3"
4"
5"
6"
If NPT were selected have only the thread pitches to be shown in the Combobox below
27
18
14
11.5
8
can be selected
If BSP were selected different thread pitches to be shown in the Combobox below.
28
19
14
11
Private Sub UserForm_Initialize()
With ComboBox1
.AddItem "SELECT THREAD TYPE"
.AddItem "NPT"
.AddItem "NPTF"
.AddItem "BSPT"
.AddItem "NPS"
.AddItem "BSP"
End With
I am trying to find a macro that can search a sheet for any cell that contains the text "Not on AOI" selects a range that contains that cell, 81 rows below, and 2000 columns to the right, then cuts the selection and pastes it 162 rows below the original cell where the text was found. What's hard is that the number of columns between the "Not on AOI" cells is variable.
I'm very new to excel macros and the parts I think I've put together are:
Cells.Find("Not on AOI", After:=ActiveCell, LookIn:= _
xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:= _
xlNext, MatchCase:=True).Activate
[Code].....
I've got two listboxes
Listbox1 has
A
B
C
D
E
Listbox2 has
1
2
3
4
5
6
7
8
9
10
If someone clicks "A" in listbox1, I want to select "1" & "4" in listbox2.
If someone clicks "B" in listbox1, I want to select "2" & "3" in listbox2.
etc.
I have a column of DV lists. Is it possible for me to make excel, go through each DV list, and randomly select an item from each DV list?
View 1 Replies View RelatedI have 8 car models in column A of sheet1 and I have a list box control with every car model on sheet 1 as well. I would like code to select all the models from column a in the list box with code.
View 2 Replies View RelatedI've got a list of items (formatted alphanumeric) in column G starting at row 2. I would like a cell formula that would randomly select 30 items from this column and place them in column H starting at row 2. One caveat is that the list must remain static once created. If the Rand()function is used, it recalculates whenever the worksheet is updated so that might be a problem.
Cell formula to do this? A VBA solution would be OK as well.
How to select pivot items in a pivot field based on choices from a MULTICOLUMN listbox?
At present, all I know is how to deselect pivot field values
Range("A5").Select
With ActiveSheet.PivotTables("PivotTable4").PivotFields("MONTH")
.PivotItems("MAY").Visible = False
Because the pivot table automatically starts with all items selected?
I’ve got a folder on drive C named “Customer Sheets”. In this folder at any time there could be over 500 individual customer sheets. i also have a "Summary Workbook" on drive C
What I need is a macro in my "Summary Workbook" that copies cells (“B3, B6, B12, B13, G5, G6”) form every customer sheet in my “Customers Sheets” folder and paste it into my “Summary Workbook” onto sheet2, every customer in a new row.
The “Summary Workbook” should run this macro every time it is opened or on my command so that the database is continually refreshed when a new customer sheet is made.
I have 2 sheets, 1 sheet has a list of materials that require Certifications. The 2nd sheet is actually a report of which materials is needed for the specific job at hand. Column C will be linked to check boxes on a different sheet in the future (thats why i used True/false instead of Yes/no). What i would like to happen is when a cell in Column C is TRUE the information in column B be sent to the Certifications sheet in a list from C8 to C34 with no spaces.
View 3 Replies View RelatedI am trying to use the bellow code to set one pivot item (MyItem) to true and the rest to false... unsuccesfully
Code:
For Each pt In Sheets("Schedule Dashboard").PivotTables(PivotTable1)
If pt.PivotFields("District").PivotItems(MyItem).Visible = False Then
pt.PivotFields("District").PivotItems(MyItem).Visible = True
Else
pt.PivotFields("District").PivotItems.Visible = False
End If
Next pt