I have done a V-lookup that auto populates my project report doc with different lead times/dates depending on the product selected. Problem I have it that the dates being pulled through are for all calendar dates and not just working week days.
I know you can select a selection of dates and fill as week days however all of the dates on my primary sheet either have the project start date minus lead time formula or the vlook up formula in it. Filling week days overwrites any of this.
I have a code that I have put in the ThisWorkbook section, and I thought it should work - but nothing happens....
Code: Sub FirstSub() Application.OnTime TimeValue(Sheets("SetUp").Range("G1").Text), "SecondSub" ResetTime = Now() + 1 Application.OnTime ResetTime, "FirstSub" End Sub Sub SecondSub() If Weekday(Now()) > 2 And Weekday(Now()) < 7 Then Call CreatePDF End Sub
I would like to have a spreadsheet where everyday of the month dislpays automatically
such as 01/01/08 in A1 01/02/08 in A2 etc.
According to a cell name Account Period (eg 200801)
But I don t want week end days to be displayed. In the same excel document, I have a sheet with all non working days and week end for 2008 and another sheet.
TWO more days to turkey day. 3 more to BF --- yaaaaak! Anyway,
Iam trying to display only 3 workdays in each of three cells. Days displayed depend on today's date.
I am usinf the following but it displays SAT and SUN.
Q3 = today's date =UPPER(TEXT(Q3+2,"DDDD")) displays THURSDAY =UPPER(TEXT(Q3+3,"DDDD")) displays FRIDAY =UPPER(TEXT(Q3+4,"DDDD")) displays SATURDAY -- would like it to display MONDAY
Q3 changes to reflect today's date therefore this would display: =UPPER(TEXT(Q3+2,"DDDD")) displays THURSDAY =UPPER(TEXT(Q3+3,"DDDD")) displays FRIDAY =UPPER(TEXT(Q3+4,"DDDD")) displays MONDAY
In other words I want to display only the week days in these 3 cells.
I have a column of dates in Col B that I need to update every day. I want a macro that will automatically fill down the date in the column, but it has to be a working day. So far I have this:
I need a formula which counts back a set number of weekdays from a given date. Eg. I am supplied with a project end date and need to schedule 25 week days prior.
I've searched a can only find formulas for the number of weekdays between 2 dates.
I have a worksheet that displays all the current months weekdays from a starting date in cell b2 using the weekday formula it works accross a row checking next day is a weekday and adding 1 but since some months have more weekdays than others the few cells that are sometimes not needed are then filled with a weekday from the next month how can I stop this? and only have the current months weekdays
I have a column where the data is listing the day of the week and time worked. What I need is to sort the column by the first four letters in cell I used the left(e5,4) to return the letters in a helper column but when I sort it still not in the Monday -Friday order. example:
I am currently assigning dates to a list manually by giving 5 dates on Mondays to Fridays. I currenly need to do this for around 500 rows and as you can imagine this takes some time.
Is there a way to have a formula that would assign for instance 5 dates on each weekday, purley by dragging the formula down?
I want to get the list of days which are only weekdays ( excluding sat, sun but includes holidays during weekdays) I have tried WORKDAY function but it is not exactly i want coz it excludes holidays during weekdays as well.
I am using office 2003 and I need to create the conditional (just like in the attached image), but I need that the days -1 (day) -2(days) or -3 (days) that are in the end of each formula, I need them to be weekdays (i don't want the to count weekends.
I would like to be able to auto fill weekdays (skipping Saturday & Sunday) in a month. For example, my spreadsheet would look like this if cell A1 contains12/01/09:
DATE WORKDAYS TASK
1-Dec 1 AP CLOSE - CAPITAL & POS ITEMS 1-Dec 1 POS MONTH END 1-Dec 1 HEALTH INSURANCE 2-Dec 2 DEPR SYSTEM RUN; INCL-SOFTWARE AMORT 2-Dec 2 SPECIAL EQUIPMENT 4-Dec 4 PRELIMINARY ENERGY REPORT 7-Dec 5 AP CLOSE - ALL OTHER ITEMS
The DATE column needs to return the date for WORKDAYS listed...Monday through Friday only. The first workday in Dec 2009 is 12/1, the fifth workday is 12/7, and so on.
What I am trying to do is cause (where the formula is) to:
If A2 is empty, put nothing, If C2 is greater than today put nothing, otherwise put C2 If E2 is empty then if b2 is "1st" add 4 workdays to A2, otherwise add 5 workdays.
I seem to have a problem with getting the formula to put the value of C2 if it is not greater than today In otherwords if the date in C2 is 6th Jan, i want 6th Jan as the result of the formula.
I have a file with 3 sheets with Sales data. First sheet is for capturing Sales data, second sheet, with some Weekly Analysis and Monthly Analysis using COUNTIFS, third is charts based on second sheet's formulas.
When I use COUNTIFS function to capture the monthly sales nos, the working days in different months vary from each, obviously. Some months have 20 days, some with 21 days, some with 22/23 days. How to write a correct code for varying working days, because I have to capture only the working days in a month, and in THAT MONTH only, leaving all Sat days and Sun days?
My formula goes like this in cell E3 and I have attached my sample file as well.
eg: If I want to measure Monthly Sales performance for a salesman, Date of Sales Performance measure will be done on the last WorkingDay/WeekDay of that month, in the month Sep-2013, Performance will be taken on 30-Sep-2013, till the 21 weekdays backwards. i.e. 02-Sep-2013. In the month of Aug or Feb the no of weekdays differs.
I'm not sure if using the Dcount formula is the right one in my example below, but I can't get it to work. Here is my data:
A B C D E F G H 1
ThrFriSatSunMon TueWedThr2 2030101512
I'm looking for a formula that would count the number of Weekdays with data in it. So the answer would be 3. As I enter data into column F, G, H, etc. the count would go up and would always skip "Sat" and "Sun".
I know there have been posts regarding this before, but I can't quite get any of them to work. I'm trying to create a function which counts the number of working days between two dates. I've come up with the following code, but it doesn't work.
Function dayscount(Firstdate As Date, Lastdate As Date) Dim x As Long x = 0 For i = Firstdate To Lastdate If WorksheetFunction.Weekday(i, 1) > 1 And WorksheetFunction.Weekday(i, 1) < 7 Then x = x + 1 End If Next i daycount = x End Function
I then use the formula "dayscount(A1,B1)", where A1 is my first date, and B1 is my last date.
I have an array (partArray) that contains a number of parts that I need to get values for. The part array is populated (Thanks Norie!) by bring in the contents of a cell and splitting them into array elements. I then run them through a trim loop to remove the white spaces. Up till here thefunction works fine.
I created a partRSL array to hold the matching value for each part ( I know i can use multidimensional arrays but i dont understand them yet and need to deliver a prototype to get some approval from senior mgmt ).
The idea is that as we run through each element of the partArray we will vlookup the corrseponding value and assign it to the appropriate element of the partRSL. When I use the function below it returns a #value. I think that the element of the partArray i want to lookup is not being used as a string and so the lookup is failing. As a test to see that this is working i have the function returning the value of element 0 in the partRSL array as it is distinct from the rest. (It should be returning a number (integer)
Function FindAlt(option_address) ' Initialise the array Dim partArray() As String Dim partRSL() As String Dim i As Integer
'Populate Array by spliting the comma separated contents of the select cell and assigning each to an array element partArray = Split(option_address, ",")
'This works fine For i = LBound(partArray) To UBound(partArray) partArray(i) = Trim(partArray(i)) Count = Count + 1 Next
I have class monday, tuesday, wednesday & friday but no class thursday. How can I make automatically fill in dates for weekdays only and skip thursday using excel 2013's "Fill" function then "series" ??
I am trying to write a UDF function where I lookup if a value is on a range on different sheet. I would like to be able to write what I want the result to be in the function. I also hard coded that the function need 3 range and 3 results, but I know it is possible the make the number of component vary depending on what the user writes. I would like my function to do that.
Here is what I have written so far :
VB: Function find_para2(var As String, rng As Range, result1 As String, rng2 As Range, result2 As String, rng3 As Range, result3 As String) If WorksheetFunction.IsNA(WorksheetFunction.VLookup(var, rng.Address, 1, False)) = False Then find_para = find_para & result1 & ", "
I need returning a working hyperlink from a vlookup. I have a table with part #'s and hyperlinks. On another tab I want to type in a part number, have it search the table and return the working hyperlink. This will allow the user to just click it and go to that tab.
I have a vlookup for one cell into another sheet however it retruns #n/a(cell A1) the cell adjacent is an if command (Cell B1) it reads if(b1>0,1,0) the only problem is if the cell (A1) will not return zero just #n/a how can I turn the #n/a into a zero? so cell A1 will return a zero and not #n/a
I have a list of cells and for each of them I preform VLOOKUP in a certain table.
Now, I want to sum the values all the VLOOKUPs without viewing the results of each VLOOKUP. In other words, I don't want a cell for each VLOOKUP result. I am only interested in their sum.
I want to vlookup one value into two different tables and return the 2nd column in the respective table it finds the value in. if it does not find the value in either table, return "". Currently I have the formula below, but it is not working 100%.
Any recommendations on vlookups being able to recognize a value that does exist within a table? It returns an N/A and the formatting is the same for both references.
