I have a column of dates in Col B that I need to update every day. I want a macro that will automatically fill down the date in the column, but it has to be a working day. So far I have this:
I would like to be able to auto fill weekdays (skipping Saturday & Sunday) in a month. For example, my spreadsheet would look like this if cell A1 contains12/01/09:
DATE WORKDAYS TASK
1-Dec 1 AP CLOSE - CAPITAL & POS ITEMS 1-Dec 1 POS MONTH END 1-Dec 1 HEALTH INSURANCE 2-Dec 2 DEPR SYSTEM RUN; INCL-SOFTWARE AMORT 2-Dec 2 SPECIAL EQUIPMENT 4-Dec 4 PRELIMINARY ENERGY REPORT 7-Dec 5 AP CLOSE - ALL OTHER ITEMS
The DATE column needs to return the date for WORKDAYS listed...Monday through Friday only. The first workday in Dec 2009 is 12/1, the fifth workday is 12/7, and so on.
I have class monday, tuesday, wednesday & friday but no class thursday. How can I make automatically fill in dates for weekdays only and skip thursday using excel 2013's "Fill" function then "series" ??
I am having trouble filling a formulae series to the left on one spreadsheet, the fomulae being references to another sheet.
For example, I have two sheets 'Mtce Options' and 'Base Case'. In 'Mtce Options' I have the following formulae
A B C 1='Base Case'!A15='Base Case'!D15='Base Case'!G15
I want to fill to the left, incrementing the column references by a factor of 2 each time, eg. next two should be ='Base Case'!J15 and ='Base Case'!M15.
However, if I autofill to the left by highlighting A1, B1 and C1 or just B1 and C1 all I get is an inappropriate reference such as ='Base Case'!D15 or ='Base Case'!F15, respectively, in D15.
I have a code that I have put in the ThisWorkbook section, and I thought it should work - but nothing happens....
Code: Sub FirstSub() Application.OnTime TimeValue(Sheets("SetUp").Range("G1").Text), "SecondSub" ResetTime = Now() + 1 Application.OnTime ResetTime, "FirstSub" End Sub Sub SecondSub() If Weekday(Now()) > 2 And Weekday(Now()) < 7 Then Call CreatePDF End Sub
I would like to have a spreadsheet where everyday of the month dislpays automatically
such as 01/01/08 in A1 01/02/08 in A2 etc.
According to a cell name Account Period (eg 200801)
But I don t want week end days to be displayed. In the same excel document, I have a sheet with all non working days and week end for 2008 and another sheet.
I have done a V-lookup that auto populates my project report doc with different lead times/dates depending on the product selected. Problem I have it that the dates being pulled through are for all calendar dates and not just working week days.
I know you can select a selection of dates and fill as week days however all of the dates on my primary sheet either have the project start date minus lead time formula or the vlook up formula in it. Filling week days overwrites any of this.
TWO more days to turkey day. 3 more to BF --- yaaaaak! Anyway,
Iam trying to display only 3 workdays in each of three cells. Days displayed depend on today's date.
I am usinf the following but it displays SAT and SUN.
Q3 = today's date =UPPER(TEXT(Q3+2,"DDDD")) displays THURSDAY =UPPER(TEXT(Q3+3,"DDDD")) displays FRIDAY =UPPER(TEXT(Q3+4,"DDDD")) displays SATURDAY -- would like it to display MONDAY
Q3 changes to reflect today's date therefore this would display: =UPPER(TEXT(Q3+2,"DDDD")) displays THURSDAY =UPPER(TEXT(Q3+3,"DDDD")) displays FRIDAY =UPPER(TEXT(Q3+4,"DDDD")) displays MONDAY
In other words I want to display only the week days in these 3 cells.
I need a formula which counts back a set number of weekdays from a given date. Eg. I am supplied with a project end date and need to schedule 25 week days prior.
I've searched a can only find formulas for the number of weekdays between 2 dates.
I have a worksheet that displays all the current months weekdays from a starting date in cell b2 using the weekday formula it works accross a row checking next day is a weekday and adding 1 but since some months have more weekdays than others the few cells that are sometimes not needed are then filled with a weekday from the next month how can I stop this? and only have the current months weekdays
I have a column where the data is listing the day of the week and time worked. What I need is to sort the column by the first four letters in cell I used the left(e5,4) to return the letters in a helper column but when I sort it still not in the Monday -Friday order. example:
I am currently assigning dates to a list manually by giving 5 dates on Mondays to Fridays. I currenly need to do this for around 500 rows and as you can imagine this takes some time.
Is there a way to have a formula that would assign for instance 5 dates on each weekday, purley by dragging the formula down?
I want to get the list of days which are only weekdays ( excluding sat, sun but includes holidays during weekdays) I have tried WORKDAY function but it is not exactly i want coz it excludes holidays during weekdays as well.
I am using office 2003 and I need to create the conditional (just like in the attached image), but I need that the days -1 (day) -2(days) or -3 (days) that are in the end of each formula, I need them to be weekdays (i don't want the to count weekends.
What I am trying to do is cause (where the formula is) to:
If A2 is empty, put nothing, If C2 is greater than today put nothing, otherwise put C2 If E2 is empty then if b2 is "1st" add 4 workdays to A2, otherwise add 5 workdays.
I seem to have a problem with getting the formula to put the value of C2 if it is not greater than today In otherwords if the date in C2 is 6th Jan, i want 6th Jan as the result of the formula.
I have a file with 3 sheets with Sales data. First sheet is for capturing Sales data, second sheet, with some Weekly Analysis and Monthly Analysis using COUNTIFS, third is charts based on second sheet's formulas.
When I use COUNTIFS function to capture the monthly sales nos, the working days in different months vary from each, obviously. Some months have 20 days, some with 21 days, some with 22/23 days. How to write a correct code for varying working days, because I have to capture only the working days in a month, and in THAT MONTH only, leaving all Sat days and Sun days?
My formula goes like this in cell E3 and I have attached my sample file as well.
eg: If I want to measure Monthly Sales performance for a salesman, Date of Sales Performance measure will be done on the last WorkingDay/WeekDay of that month, in the month Sep-2013, Performance will be taken on 30-Sep-2013, till the 21 weekdays backwards. i.e. 02-Sep-2013. In the month of Aug or Feb the no of weekdays differs.
I'm not sure if using the Dcount formula is the right one in my example below, but I can't get it to work. Here is my data:
A B C D E F G H 1
ThrFriSatSunMon TueWedThr2 2030101512
I'm looking for a formula that would count the number of Weekdays with data in it. So the answer would be 3. As I enter data into column F, G, H, etc. the count would go up and would always skip "Sat" and "Sun".
I know there have been posts regarding this before, but I can't quite get any of them to work. I'm trying to create a function which counts the number of working days between two dates. I've come up with the following code, but it doesn't work.
Function dayscount(Firstdate As Date, Lastdate As Date) Dim x As Long x = 0 For i = Firstdate To Lastdate If WorksheetFunction.Weekday(i, 1) > 1 And WorksheetFunction.Weekday(i, 1) < 7 Then x = x + 1 End If Next i daycount = x End Function
I then use the formula "dayscount(A1,B1)", where A1 is my first date, and B1 is my last date.
how to enter data in non-adjacent cells using a fill command.
Here is what I am trying to do: in the column, I am holding ctrl button to select every 10th cell down the sheet. I need to enter a date in every selected cell that is exactly 7 days apart, i.e., 11/7/08 then 11/14/08 then 11/21/08, etc.... but no other dates or data.
I have tried to figure out a way to do this other than manually, but am confounded.
Is there anyway to automatically fill the empty added cell after inserting a row without using the fill handle? For example, for a series of numbers: [URL]
2. Drag the fill handle Selected cell with fill handle across the range that you want to fill.
Or running balance: [URL]
2. Extend the running balance formula into the new rows by selecting the last cell in the balance column and then double-clicking the fill handle.
I am currently working on a project and want to use a picture of a cauldron and have that filled in as opposed to a bar graph filled with cauldron pictures. Is this possible? I picture something similar to how someone would fill a picture on a piece of paper until they hit their goal.
Secondly, If I need to do a bar graph I know I can do conditional formatting on the values within their cells but can I create this formatting specifically to the graphs themselves?
I am trying to simplify my data entry and I have this idea that I do not know how to tackle, but it would be nice to have it worked out. I am looking for an autofill macro that will fill column B2 to Bxx with values from 1 to max value specified in cell B1. Lets say I know I have 5 trees I need to enter. I want to enter "5" in a cell as a reference, and everything else will be filled in automatically with press of the button.
To make things even more productive I would like to use value from cell A2 and replicate it through the range specified above in column A2:Axx.
I have this ActiveCell.Offset(0, -1).Range("A1").Select. Selection.AutoFill Destination:=ActiveCell.Range("A1:A6"). However I need to copy the value down, so it is identical to the Range("A1"). At the moment it adds one year to each value when copied down. e.g. A1 = 12.01.09. and it copies it down so I get 12.01.10, 12.01.11 etc... I want them all to be 12.01.09
I am looking for a way for my macro to select cells C4:T4 and then auto fill the formulas down to the last row with data. I have found suggestions when working with one cell to auto fill, but cant seem to find a way to do it with a range of cells
