What is the formula for Excel 2010 if I have a text in a cell:
CM/62 Charge MTS/7/5/2013 000
CM/72 Non-Cash Adj MSC/7/3/2013 A15
CM/1542 Charge ADM/6/24/2013 S28
CM/63610 Charge MIS/7/5/2013
CM/527 Non-Cash Adj MSC/7/8/2013 S
CM/1542 Charge ADM/6/24/2013 S2
CM/5623 Charge LTE/7/24/2013 000
CM/1610 Rentup MAF/7/1/2013 S21
I need to get the result for word: MTS, MSC, ADM, LTE, MAF
I have a single work book with 8 sheets (I am using Excel 2010 BTW) and I am trying to find a total of times a word appears across all the sheets in column "C"
I found this formula on another thread. =SUM(COUNTIF(INDIRECT("Sheet"&{1,2,3}&"!C1:C1000"),"="&H3)) with an example. I made the changes that I needed for my purposes
This worked but only after I renamed the sheets to Sheet1, Sheet2, etc.
Is there a way get the same results from the above formula if all the sheets are named after our reps? Example: sheet1 is named Dan, Sheet2 is Nick, etc?
I'm having issues with some coding to work in excel 2003, 2007 & 2010 which will ensure that if cell E3 is changed to anything except "pool_car", then cell D12 is changed to 0.00.
So if a user originally selects "pool_car" in E3 and then enters a figure in D12 (which they are allowed to do using data validation), if they then choose to change the car type in E3, that D12 is then cleared of the figure they entered for the "pool_car".
I'm already using a similar code to clear other cells if another changes but am uncertain of who to change this coding or write other coding to suit.
(I am using Excel version 14.0.7106 and MS Office Professional 2010.)
I have a macro in which I have named a range of numbers in a spreadsheet, used the "find" function to find a particular number in that range, and now would like to copy some information into a cell in the same row as the found number. However, when I try to move over to the cell that I'm copying to, it only goes to the 1st row in the range that I have defined.
Here's the portion of code I think you need to see. Everything works...it finds a match...but then I don't know what to do from there to get the information to the correct row:
'Grab the 1st project number
Range("C8").Select
Do Until ActiveCell.Value = ""
If ActiveCell.Value "" Then
prjnum = ActiveCell.Value
Selection.Offset(0, 8).Select
[Code] ..............
i have Office 2010 and an Excel sheet that I need to use as the source in a Word Email merge.
I am trying to avoid the user having to open Word & run the Merge manually by providing some code in Excel to perform the task & create the emails.
I have a long bit of code that at one point saves a Word document and then saves it again with a new name and the old (legacy) .doc extension.
This all works find when the user is running Office 2007. However, it errors out for using Office 2010. The reference libraries are all correct (as far as I know).
Code:
Dim myDoc As Word.Document
Dim saveAsName as String
saveAsName = "some text here" + ".doc"
myDoc.Save
myDoc.SaveAs fileName:=(saveAsName), FileFormat:=wdFormatDocument
I'm trying to pass a variable from Word to Excel. Basically I have a Word document with a plain text content control in it. I'll have users populate this field. I know how to create a reference to that content contol in Word VBA that'll tell me what's in that content control (eg.
Code:
MyWordVar = ActiveDocument.ContentControls(1).Range.Text
).
What I can't figure out is how to pass the value of "MyWordVar" to a variable in Excel.
i have done in Word VBA successfully (basically, change the Style for a certain number of lines):
VB:
Dim myRange As Range
Set myRange = ActiveDocument.Range(ActiveDocument.Range.Start, ActiveDocument.Range.Start)
[Code].....
I have a word template that gives a popup when started for the user to fill out. At present this is okay, but it is hard to maintain. So what I want is to be able to add all needed information in Excel - since our tools have the possibility to export my needed info to this.
I have a spreadsheet in Excel 2010 named 'Input TR'. This info I want in the popup macro in word. When choosing name from a dropdown menu - I want Excel to give me the choices instead of having it in the coded macro. After I have choosen the name - I want the product belonging for this name in the 'Product/Service:' dropdown menu, e.g Test 1 will give the value 1...5. (I will only be able to choose one of them)
Today - everything is coded in the word2010 macro, and thus difficult to maintain.
I have a word docx embedded within my spreadsheet .
Both are on Office 2010 versions and I have named the embedded word doc
docx = CCPBlank (named range)
sheet = Support Data
I want to open the word doc from within the spreadsheet from a user form I already have created for other module calls.
Any simple VBA code to open the embedded docx?
I have looked a previous posts and not sure they are suitable. I have embedded the docx as I want to ensure only that empty version is opened each time. It also means I only have to send one file (xlsm).
I need to count how many times the word Test is in the range B4:H9 with
Range N2 = Test the formula below works if Test is only in the cell once.
=COUNTIF($B$4:$H$9,"*" & N2 & "*")
But I have data in cells like below, this is all in one cell, so how would I have it count all the times test is in the range when some cells have test 2 or more times in a single cell?
5
Test
8am-2pm
Test
5pm-10pm
I am trying to take multiple tables from a Word document and import them into an Excel worksheet. Currently I have found two versions that when combined, could yield what I am looking for. The first one imports the table's data from Word, but does not maintain formatting of the table (font, colors, rows/columns etc.):
The next code maintains formatting, but only imports/pastes one table:
[Code] .........
For the second one, I do not like the fact that it is calling a specific Workbook to paste into. If I could somehow maintain the ability to import/past multiple tables while keeping formatting that would be perfect. An extra bonus would be to import each table within the Word document into individual Worksheets in Excel. I am also using Office 2010.
References: [URL] .........
VBA - How to preserve source formatting while copying data from word table to excel sheet using VB macro? - Stack Overflow
I am having trouble getting my IF statement to test if the cell contains the text "sale" return "X" if not "Y". I need it to search through the text string in that cell and find a certain word, and if it finds that word, retrn a value. I am really having difficulty with is what symbol or function do I use for the logical test? (i.e. =, <>, MATCH, INDEX?)
View 4 Replies View RelatedI work with a team of users that are continually publishing reports in Word that contain charts and graphs copy and pasted from Excel into Word 2010.
We have a custom script that leverages a PDF engine to automatically convert .doc files to .PDF files that we distribute electronically to our clients. This all works great, but only if all my users select 'paste special' and Enhanced Metafile Format when adding their excel charts into our reports. Most of these people aren't tech savvy, and I'm havin ga hell of a time getting them to follow this workflow and am hoping there's a way in Office 2010 to select the default paste from excel into word when the content is a chart.
It seems like the default paste from excel is an embedded chart/graph that you can then further manipulate each component of the chart in Word; the default doesnt' paste an actual image. I am assuming the pdf renderer is using a lower resolution .PNG version of the image and when these are scaled for print and or pdf, they look like crap.
Is htere anyway I can automatically change the default paste format for the chart from excel into word to be an EMF/EMV (enhanced metafile?) Either thorugh the registry or some other saveable setting?
I have never used VBA in word before, so I am assuming I am making it more complicated than it needs to be. I have a macro that stores 20 excel values as variables, then opens up a word document. I want to replace values in word with my values in excel. I keep getting an error with the replace part. I do not want to use bookmarks or mail merge. MSWord is a reference in excel VBA.
Code that stores excel variables (Example: Var1=Data1 and Var2=Data2)...
'Opening up the correct word document
Dim WdApp As Object, WdDoc As Object
Set WdApp = CreateObject("Word.Application")
WdApp.documents.Open ThisWorkbook.Path & "" & Range("D1").Value & ".doc"
WdApp.Visible = True
[Code] ..........
I'm looking to simply delete certain words that are in cells, without having to delete rows, columns or the entire cell. I can use 'find and replace' and replace the particular word with a space, but I really want to delete the word. I'm using both Excel 2003 and 2000.
View 4 Replies View RelatedI am trying to use the code that can find the last used row in particular column.
Here is the code in module1
Code:
Function LastRow(rng As Range)
Dim temp, temp1
Dim col As Range
With Application.Caller.Parent
For Each col In rng.Columns
temp = Cells(Rows.Count, rng.Column).End(xlUp).Row
If temp > temp1 Then temp1 = temp
Next col
End With
LastRow = temp1
End Function
and code in the range
Code:
=LastRow(V12:V300)
My problem is, this code was working nicely but now it only shows ###.
PS I use MS office 2010
I'm looking for one function for each of these properties that will provide them with negligible overhead in all or almost all spreadsheet data cases, such as the normal spreadsheets, autofiltered data, large workbooks, etc.
By the way, by "first row", I mean the first row after the header row, given that the header row is in row 1.
I am using Excel 2010 and I am currently trying to find the Avg Min / Avg Max costs for 4 different groups.. Players, Accompanying, Coaches, Medical.
I need it to get the minimum values from 3 different sections ( I am using custom names for them such as PlayerReg for Player Registration costs ) once it gathers the minimum / maximum values from the 3 different sections it needs to add them together to display the Avg Minimum / Maximum for each group.
At the moment I have =MIN(Total_Discount_7_Nights + PlayerReg + FrequentFlierFare) under Minimum /w Frequent Flier although the minimum value it should detect is $948.75 it displays $1115.
For maximum I have
=MAX(Total_Discount_7_Nights + PlayerReg + FrequentFlierFare) under Maximum /w Frequent Flier although once again this value should be $1174.50
Although for some reason it displays $978.75 - which is the minimum cost. The Maximum figures for the other groups (Accompanying, Coaches and Medical) don't even display values Instead it just has #VALUE! in which I'm guessing I have something wrong with it.
Excel 2010. I have two very large tables of data:
Table 1 is a long list of unique items in no particular order, each of which belongs to a unique group of items, for example:
ItemsGroup ID
apple
pear
grape
fig
banana
guava
peach
mango
Table 2 lists all the Group ID numbers and in the same row as each Group ID number, shows the names of all the items belonging to that group, one item in each column. Different Groups have different numbers of items in them. For example:
Group IDItem1 Item2 Item3 etc.
214applepeargrape
33fig
7bananaguava
59peachmango
Is there a formula I can use in the second column of Table 1 to look for each item in Table 2 and tell me what group it is in? For example for "apple" or "pear" or "grape" it would look in Table 2 and return the Group ID number "214".
I have Excel 2010, and a dual monitor setup, with the left monitor being the main one. I have my spreadsheets on the right monitor.
When I open a Find and Replace, the dialog box always goes to monitor #1 (left); I want it on monitor #2.
Is there a way to default it to the "right" monitor?
In Excel 2010, I have a list of numbers with about 7000 rows. I am trying to track the number of times the number "22" appears within 30-day periods, with the end-result being a "count column".
While I could enter a formula manually for the date ranges, there are over 200 time-spans I'd have to enter (list goes back to year 1994). Is there a way to automate this process...
Excel 2010ABCDE1DateNumbers List# of Days AgoCount for number
22205/31/12304305/30/12602405/29/12909505/28/12301202605/27/12391505705/26/12371807805/25/1222210
11905/24/123824051005/23/122227091105/22/123230011205/21/123533001305/20/12383608
[Code] .........
In an Excel Pro Plus 2010 workbook on a Windows 7 PC, trying to use the "After" argument in a VBA .Find function and it's not working as expected.
I've got the following data in column D:
Row1: Title
Row2: Row2Data
Row3: Row3Data
And using this simple procedure:
Sub FindTest()
If Range("D:D").Find("Title", After:=Range("D1")) Is Nothing Then
Debug.Print "Not Found"
Else
Debug.Print Range("D:D").Find("Title", After:=Range("D1")).Row
End If
End Sub
My expecation is that "Not Found"will be returned, but instead I'm getting the row # (1).
If I change the value in D1 the procudure returns "Not Found", as expected.
If I change the find argument to look for "Row2Data" it returns 2.
I also tried changing the "After" argument to "D2" ... same result.
Finally, I tried using this format: "Range("D:D").Find("Title", [D2])" and got the same result.
I need a vba code that will find all the columns (j) which there cell(1,j) includes the word "Date". the word "date" will be a part of a title, for exmple: "due date", "starting date"
View 4 Replies View RelatedIs there a way to differentiate the number of unique and duplicate entries (considering multiple criterias) using a formula.
I am finding it hard to describe the request hence i have attached a spreadsheet for reference.
The first tab contains the data where I want the result in 'column J'
The second tab contains the metrics of how to calculate the result.
I am sure this will be difficult to understand at first hence feel free to ask as many questions you would like to [only related to the subject ]
For the record, I use Excel 2007 & 2010.
I have following sheet:
Data from A1: BU1644
I need to check, if in A1:BU1 are any duplicate words.
All the formulas I found deal with finding duplicates downward (like A1:A1000).
Have not seen any formula which works across (from left to right)
Is there an easy way in Excel 2010 either to tag/ and -or remove the duplicate which I could apply and then just copy downward? The formula must work from left to right, because many words repeat downward.
I have Excel 2010 & Window 7. I have 2 sheets of business names, some businesses in sheet 1 may be named slightly different in sheet 2 and not all businesses in sheet 1 are included in sheet 2. I would like to be able to find the closest match (from sheet 2) for the businesses on sheet 1 and return the closest matched business name.
View 2 Replies View RelatedI have an excel workbook where some sheets have a column called "Name" in Row 3. The column where "Name" appears shifts based upon other criteria so it's not set within 1 specific column.
The real data for the "Name" column starts in Row 5. Is it possible to create a macro that looks in Row 3 for "Name", then once it finds that column, it does a find and replace from Row 5 to the end of the data and replaces every space with a ^.
For example, if I have:
Row 3 Name
Row 4
Row 5 John Smith
Row 6 Jane Doe
Row 7 John Doe
Row 8 Jane Smith
I'd like the data to become:
Row 3 Name
Row 4
Row 5 John^Smith
Row 6 Jane^Doe
Row 7 John^Doe
Row 8 Jane^Smith
I'm using Excel 2010 if that impacts anything.
I am using Excel 2010. I am digging through a workbook with 80-some worksheets. There is one worksheet with 11 data tables. When the workbook refreshes, there is a note at the bottom saying something about 21 data tables. I am not sure where the other 10 are. In an online post, someone said that the Name Manager should show them. But in Name Manager, when I filter on Tables, the list goes blank, and all the icons are the same for the other named ranges. Is there another way to find the data tables?
View 9 Replies View RelatedI have attached sample files as reference. I am using excel 2010
I wish to move all duplicates from one sheet (Orders) to another(Duplicates).
Sheet0 is the original sheet(Orders)
Sheet1 is the orders sheet once the duplicates have been removed
Sheet2 is the duplicates sheet
Sheet3 I am also looking to achieve what is in sheet3 so that the quantity and stock code is all in one row as shown in the example sheet3
Basically I am looking for it to finish up like sheet1 and sheet3
Link to files: [URL] ........