I format the cells with ########## but it does not add the neccesary 0's if its not 10 digits, am I doing something wrong?
Some of the cells are 4 digits, some 7 some 9 etc i need all 10 with trailing 0's
I have a sheet with column A. This column A contains numbers from 1 number to 6 numbers.
So, one cell can have a '1' or a '999999' or any combination between them. Now this is the problem.
I want a formula that will fill those cells that don't contain a number up to 6 digits. So if a cell contains '254' I will like this formula to fill the cell like this: 000254.
This should happen with any number that don't have a number with six digits.
78 should be 000078, 78652 should be 078652 and so on.
I need a formula to drag down the attached that will place zeros infront of any numbers that don't have 9 digits. so if a part number consists of 6 digits then i need 3 zeros in front of it, if a part number consists of 9 digits then i dont need any zeros proceeding it.
View 2 Replies View Relatedwith the data in the attached sheet, I create several different pivot tables that need show the count of the information in the columns M:DU. My issue is that the data is sent to me from a third party and the columns contain zeros that cause the counts to inflate.
What I would like to be able to do is run a macro that will search out any zeros in M:DU and replace them with a blank cell.
Unfortunately the number of rows increases with every monthly reporting cycle so the macro would need to be able to accommodate for that.
I am editing a wine database which contains a vast amount of data, one column has the wine name and sometimes the vintage year in the begining or at the end of the cell. Sometimes the year is made of 2 digits (03, 05, ..) or 4 digits (1978, 2004, 2005, ...).
Is there a way to remove this vintage year form the string?
to make matters worse, there is often a single quote/apostrophe in front of the vintage year, which is driving me mad as 98% of the time it is one of these hidden ones that cannot be deleted using the find/replace function.
examples are like below:
De Wetshof Finesse/Lesca Cahrdonnay ‘07
De Wetshof Sauvignon Blanc ‘07
Lord Neethling Cabernet Franc 2002
Lord Neethling Pinotage ‘01
Bouchard Finlayson Tete de Cuvee Pinot Noir ‘07
Jacobsdal Pinotage 1994
Zondernaam Sauvignon Blanc 2007
Tokara Red
1976 St Emilion
03 Tokara rose
Plasir de Merle Cabernet Sauvignon ‘05
DuToitskloof Pinotage/Merlot/Ruby Cabernet
1999 Tradition Juracon 375ml
I have been searching the Internet for the past 2 days without luck on how to delete the end of string vintage year.
I have had some luck with the left side, as in:
=IF(ISERROR(VALUE(LEFT(B2,SEARCH(" ",B2)-1))),B2,MID(B2,SEARCH(" ",B2)+1,LEN(B2)))
As I am not an expert with Excel, I have no idea on how to use VBA (every time I have tried even basic things, I failed) nor even sure how the above funtion works (found it on another site).
I thought I could acheive my goal in two steps, first removing the left side vintage and use this partial result with the RIGHT equivalent funtion, but it simply is not working!
I am editing a wine database which contains a vast amount of data, one column has the wine name and sometimes the vintage year in the begining or at the end of the cell.
Sometimes the year is made of 2 digits (03, 05, ..) or 4 digits (1978, 2004, 2005, ...).
Is there a way to remove this vintage year form the string?
to make matters worse, there is often a single quote/apostrophe in front of the vintage year, which is driving me mad as 98% of the time it is one of these hidden ones that cannot be deleted using the find/replace function.
examples are like below:
De Wetshof Finesse/Lesca Cahrdonnay ‘07
De Wetshof Sauvignon Blanc ‘07
Lord Neethling Cabernet Franc 2002
Lord Neethling Pinotage ‘01
Bouchard Finlayson Tete de Cuvee Pinot Noir ‘07
Jacobsdal Pinotage 1994
Zondernaam Sauvignon Blanc 2007
2003 Tokara Red
1976 St Emilion
03 Tokara rose
Plasir de Merle Cabernet Sauvignon ‘05
I have been searching the Internet for the past 2 days without luck on how to delete the end of string vintage year.
I have had some luck with the left side, as in:
=IF(ISERROR(VALUE(LEFT(B2,SEARCH(" ",B2)-1))),B2,MID(B2,SEARCH(" ",B2)+1,LEN(B2)))
As I am not an expert with Excel, I have no idea on how to use VBA (every time I have tried even basic things, I failed) nor even sure how the above funtion works (found it on another site).
I thought I could acheive my goal in two steps, first removing the left side vintage and use this partial result with the RIGHT equivalent funtion, but it simply is not working!
Does anyone have an idea on how to help with this?
Ideally I would love to cut the vintage year, whether 2 or 4 digit, whether on right or left of cell and paste it in another cell, so to avoid manually doing it.
However, this is surely too complicated to do, so iwould settle with just deleting the vintage year and manually typing the vintage in another cell.
i need to format my numbers in the following format
10,00,000.00
the first three digits will be separated and then subsequently 2 digits
I have the following working great, but would like to see it refine a little, as the data vlookup is 6 digits, but i only needs the last 4 digits is enough for me to work, my question is how do i go about adding that to the following function i have implemented and working fine.
=IF(ISERROR(VLOOKUP(B4,' cmfs01home$peter[tracker data 4-25-14-a.xlsx]ControlSheet'!$B$2:$F$301,4,FALSE)),"",VLOOKUP(B4,' cmfs01home$peter[tracker data 4-25-14-a.xlsx]ControlSheet'!$B$2:$F$301,4,FALSE)
I’ve created a formula for this statistic and I’m happy with the results. Because I’m working with formulas, my only problem is the unwanted zeros. How do I hide zeros that show up automatically (i.e. #3 [blank] and Nov 09-June 10)? I can hide the numbers, but if I enter a zero to one of my future statistics it will not appear and I don’t want that to happen. Is there a way to hide those automatic zeros without affecting my real zeros?
Vendor’s Name
Jul 09
Aug 09
Sep 09
Oct 09
Nov 09
Dec 09
Jan 10
Feb 10
Mar 10
Apr 10
May 10
June 10
1
Vendor1
20
5
15
3
0
0
0
0
I was wondering how do you format a cell so that when i enter the number 7 it automatically sets it at 007 and for like 10 it would be 010 so a must have of 3 digits
View 5 Replies View Relatedadding the sum of digits in a cell using VBA. For eg: in A1 if I have 12345 I need the sum of 12345 (15) in cell B1.
View 3 Replies View RelatedI found a formula that would copy only the last 2 digits of a previous cell and put it in a new cell. For example below, I want the cells to the right of the below to be:
12345 45
26548 48
21854 54
211ae ae
I thought it was a =right or something.
These are source cells:
('sheet 1'!h14) 26.9% (246/914)
('sheet 1'!h15) 23.4% (314/914)
('sheet 2'!h14) 33.8% (212/577)
I want to insert ONLY the number after the left parentheses and before the slash into sheet 3 same cells and sheet 4 same cells
('sheet 3'!h14) 246
('sheet 3'!h15) 314
('sheet 4'!h14) 212
something like
='sheet 1'!h14(after (before /)...?
What type of formula do I need that will convert the following into one sum?
in Cell A1 : 34-23
I need a formula that will add 34+23 into another cell... this should be simple, but I've never had to write one for this before...
I have pasted over 1300 numbers in a list, all of which need to have 5 digits. However, when I pasted the 5 digit number (ie 00003) into the cell, it omits the leading 0's.
Is there any way to get these numbers back to having 5 digits....and if it omitted the 0's, can I put them back all in one fell swoop?
find a formula or function where i can remove the last 4 digits from cells. I have a spreadsheet where there was might have been concatenation do where 4 digits were added to the end of part numbers in a cell. I need to remove just the last 4 digits so that I can do matches later on. Each cell has a different number of characters and i just need to remove the last for Example 154758NE20 or NFD148574DE11. Need to remove the NE20 and DE11 respectively.
View 6 Replies View RelatedDuring work this thing stuck me that i have a column A1 an amount like 12345663..now what i want in column B1 the same amount but except first 3 digits..for example instead of 12345663 i want only 45663 in column b..
View 4 Replies View Relatedi have attachmed excel file. in that file total 8 colums among them i kept 8th colum empty .
but i want name racks in that file. i knw..it will confuses u. but once u see my attachemts u will realize.
eg: if G2 =XA06-G-001 I2 will be XA only..(XA is rack Name)
if G2 =XB06-G-001 I2 will be XB only
if G2 =XC06-G-001 I2 will be XC only
if G2 =XD06-G-001 I2 will be XD only
i mean to say..i want only first two alpabatics of G2 in I2..
I am wanting to replace part of a cell ( the first two digits) with nothing - blank
eg cell contains 441298871657 and i want it to read 1298871657
I am looking for a function to do this, i have tried using the finf and replace function but if 44 appears somewhere else in the value this will also be replaced.
I'm struggling to find a good formula or code produce the below. I have a column that contains a text string followed by spaces then a number. I need to sparate these into two separate cells.
OldNew NewD-EUROBANK PROPERTIES REAL E 4D-EUROBANK PROPERTIES REAL E4D-ACTIVE INVESTMENT SA 12-SYNT 567D-ACTIVE INVESTMENT SA 12-SYNT567RSK HYDRO-NWKR 25(NORWAY REG 1RSK HYDRO-NWKR 25(NORWAY REG1ADRILL LTD 1ADRILL LTD 1OFFSHORE LIMITED 1OFFSHORE LIMITED 1TRATA PLC 2TRATA PLC 2
as you can see in the picture;
it is possible to separate numbers from Column A into each column of B and C?
in A1 I have a drop down list with unit numbers and descriptions
example - 123456 - 30 to 150 lots
I want to see if when I pick from the drop down list the right unit and description that the cell will only show the first 5 digits.
example I pick 123456 - 30 to 150 lots in cell A1 would say 123456
I am triying to write a formula adding two digit in the same cell and return the sum as a single digit as shown below. but not sure how to go about doing it. would appreciate any kind souls to help out.
C5 D5 E5 F5H5I5J5K529121958 D8 F8 H8 J8 2 3 1 4Let's say if 2+9 = 11, than I wan to break 11 into 1+1 = 2, how can I get it done?examplecell D8 is the sum of cell C5 and D5 which is 2+9 = 11. than 11 is further break down into 1+1 = 2cell F8 is the sum of cell E5 and F5 which is 1+2 = 3.Likewise for cell H8 is the sum of cell H5 and I5 which is 1+9 = 10. than 10 is further break down into 1+ 0 =1cell J8 is the sum of cell J5 and K5 which is 5+8 = 13, than 13 is futher break down into 1+ 3 = 4.
I need a function that can find a single digit in the cell containing the shifts worked. As an example, the cell may contain 1, 2, 3, 12, 13 or 23. I have tried using the FIND function, but so far I have not been able to make it work. I will continue to research the FIND function, but a function that would search a cell "containing" a specific digit would be ideal. If there is such a function out there.
View 9 Replies View RelatedOur software extract for our data base sucks and values do not align properly if all entries do not have tge exact same number of fields with data in them.
I have always done the alignment in excel manually. I can find where the data starts to misalign and would like to do this automatically.
There is an id number for each entry (row) that is 6 digits long. How can I search a row for a 6 digit number and return the address of that cell? i can use this address as a starting point and use the offset function to do so alignment from there.
vb code that will break out each 6 digit media used in their own rows such as in the illustration below.
Sample data before macro
Master Backup
GTI - Hostname
[Code]....
I current have an Excel doc that I am trying to pull averages from. Every row has data that needs to be averaged but I only need every other cell. And I cannot have zeros in the average because it will skew the data. Also if the average for a row ends up being 0, I want that average to show up as 0 not #DIV/0!. From Column H to EE I need to average each row individually.
I came up with the below formula.
=IF(SUM(H1:H1:J1:J1:L1:L1)=0, "0", AVERAGEIF(H1:H1:J1:J1:L1:L1, ">0")
It works but Its not practical because I have to manually enter all of the cells that it pulls from.
I have a whole number in cell C2, but i am formatted it in Cell C3 to always have leading zeros combined with the number in Cell C2, where the result will be 8 digits long. example, my number in cell C2 = 572 but i need it formatted to be 00000572, but if the number was 19 it needs to be formatted to be 00000019 and so on.
View 2 Replies View RelatedCount all zero(0) in the row except those that belong to column "Friday" :
Friday
17
18
19
20
21
22
Friday
24
25
26
27
28
29
[Code] ........
I am running a formula in Cells B34 and C34, but when I have no values in these cells, I get a "0" in my total cell E34. Is there a way to make the cell E34 show nothing at all when there is nothing in both cell B34 and C34? Like an "and" statement? If there is nothing in cell B34 "AND" C34 make cell E34 empty?
View 9 Replies View Related