Arrange Some Set Of Data In Fixed Format And Create New Sheet For Each Set?
Oct 28, 2012
I was wondering if i could arrange some sets of data (on one sheet) in fixed format and create a new sheet for each set of data using VBA
I have some sets of data in sheet (similar to the sheet "Raw data" of the attached file)
first four rows contain costumer-1 details,
next few rows contain bill details of costumer-1,
again,
next four rows contain costumer-2 details,
next few rows contain bill details of costumer-2,
and
table goes on for around 10-20 costumers
Now, I want to arrange the given set of data of each costumer into a fixed format (as sheet "reminder pad" of the attached file) and create a new sheet for each costumer
Also I want to add reference no to each sheet (with automatic increment for each sheet)
I'm trying to write code which allows me to cut and paste arrange of data from one sheet to the next.
the critical field is MRPC column i, I need to select all data that when I apply a auto filter allows me to cut and paste from the line below the header. And repeater using the a value
>=200 Cut all cells, rows paste. then repeat this >=155 to 199 >=145
I want to be able to copy a name from one sheet (Available Players), paste it to a cell in another sheet (Round 1 through Round 20). The cell that will be copied is fixed but the place where it will be pasted will be different and may be on a different sheet.
also i would like to change the color of the copied cell to "greyed" out or cut if it can not be greyed out. I have created a button and put in a macro that i created but have been having problems with it, generic 1004 errors that i can not figure out. i am attaching the document.
I need to know how to format columns in a spreadsheet. What I want to do is autofit the columns, all except for Column A; I want that want at a fixed width of 9. The code below is my attempt to do this, and it's not resulting as I wish. Stepping through the code, it performs the first part beautifully and autofits all of the columns. Where I have the line
Would like to know if there is a way to arrange two different sheet under the same workbook horizontally? I have used the excel help box but did not manage to find a way.
I need to extract all instances of words that have format xnnnnnn, where x is an alpha character (letter of alphabet, to be precise) and nnnnnn are numbers. The words could something like u435586. The problem is I do not know how many instances of these words are in the string. The entire string is contained in a cell. A sample string could be something like:
I need the different categories to be separated into separate columns, but they do not appear to be separated by anything useful or a fixed width. Not only that, but the last few columns were moved onto a second line when I copied the data into Excel for some reason. The data originally came over in an Adobe Acrobat file. This is what the final product should look like: ....
I need to fixed width-text to column macro and found a reply in the forum.
However, when I apply the macro, the result of zeros in front of figures disappear since the format of value in splitted column doesn't predefined as text
e.g. sample text to split to column: 000122042009ABCDEFG00567
Required result: 0001|22042009|ABCDEFG|00567
when running below macro; result shows: 1|22042009|ABCDEFG|567 (Beginning zeros figures of the first and last column disappear)
So I have a guest list workbook. There are two sheets. On the first one is a list of names on Column A. On Column B is a classification: 'C' if confirmed; "D" for declined; "I" for pending. I want to have all the names with "C" on sheet 1 appear on sheet 2 automatically.
I need to create a macro that will scan a spreadsheet for the number of sheets and then pull data from the same places on each sheet in order to create a summary sheet. Let me try to explain a little better.
The spreadsheet I'm working with has a separate sheet for each new deal our company makes. Each of these sheets is in the same format - we use a template and fill in the data based on that whenever a new deal emerges. The sheets contain basic info about the deal in the first few rows and columns, then some narratives with dates describing the progress of the deal, and then a list of issues and whether or not they have been resolved. The problem is, each of these sheets contains too much info for a quick, high-level overview with the bosses so they've asked me to create something that will pull the basic info, the most recent narrative, and any unresolved issues from each sheet. This way, each time there's an overview scheduled with the bosses, the macro can be run and it will create a new sheet with data from each sheet in the workbook.
I have created a pivot table in a workbook which relates to data from 2011 - 2012 and this works perfectly. What I now need to do is to copy the pivot table (without the data source) to a new workbook for data which will be collected from 2012 - 2013. Unfortunately when I copy it and try and find the new data source it does not update the filters according to the data in the new workbook.
i have a sheet called 'sample database'. it consists of 56 columns, each with a specific title in row 1. i.e. name, surname, mobile_number, and so on. from row 2 onwards the data has been populated for roughly 200 rows.
i have another 'Capture Sheet' which has the same titles as 'Sample database' except it's in a different format. its a printable form that is given to new employees when they start. once they have completed it it gets captured into the 'Sample Database' sheet.
my wifes boss now wants 1 new sheet for each row in the 'sample database' sheet based on the format/layout of the 'capture form'. how can i get the 'capture form' to auto populate the data from the 'sample database' sheet and create a new sheet for each row? i know this is possible i just dont know how to do it.
I want the range B111:B167 from the hidden sheet copied to Column A of the questionnaire sheet 5 rows after the last used row on the sheet. There is text in cells C261 & S261 at the bottom of the sheet, so currently row 261 is the last row, but users could/might insert or delete rows, when answering questions. I then also want to copy the error check responses from C111:C167 to column N of the questionnaire sheet 5 rows after the last used row on the sheet, so the question # and response matchup. I then planed to delete any rows that have “Answered” in column N on the questionnaire Sheet. The Idea being the user can run the macro over and over until no questions remain.
I have a calculator and I am trying to set a macro that will take the cells highlighted copy them to another sheet, change the format to standard( no background color) make the data fit in one page and print it.
this is what I got so far:
Sub Set_Print() ' ' Set_Print Macro ' set printing area and print
how to merge data automatically in one sheet (master sheet) from specific sheet with different name sheet but same format?
Adding, deleting or editing should be automatic update to master sheet.
For example:
Sheet name:
Sheet 1: Salesman 1 - with data range A10:F310 (as his data file) Sheet 2: Salesman 2 - with data range A10:F310 (as his data file) Sheet 3: Salesman 3 - with data range A10:F310 (as his data file) Sheet 4: Salesman 4 - with data range A10:F310 (as his data file) Sheet 5: Salesman 5 - with data range A10:F310 (as his data file) Sheet 6: Salesman 6 - with data range A10:F310 (as his data file) Sheet 7: All Salesman - - with prepared data range A11:F2000 (as master data file/record for 6 salesman)
Column Name as a Header:
A10: Customer Number B10: Customer Name C10: Salesman ID D10: Promotion Type E10: Promo Item F10: Free Item
I am starting a data sheet that I will be pasting from the internet into my data sheet daily, the problem I have is that the content data is pasting with blank rows between data and also there is one piece of data that is situated on the row below which i need moving to the end of the main data row, the idea is to have single data rows with no blank rows.
I have attached an example sheet showing the layout it repeats with only the amount of data that changes.
I have colored the data as follows:
Grey= Blank Rows Yellow= Data Move to end of main row Green= Unwanted Data
I want to know is there any way to arrange bars in the chart with respect to their magnitude (ascending or descending) without making changes in the source data?
How do I rearrange the data columns in a pivot table? I have a table with year to date months, open PO's, & budget numbers, but I'd like to change the order in which they show up in the pivot table.
I want to take a list of phone numbers in a single column(800,000+ rows)and spread the numbers across the page horizontally to fill the page. Each of the new rows will have probably 4-5 phone numbers. below is an illustration:
I have a long list of accounts (for the purposes of of bookkeeping - keeping a cash disbursement journal) and I use data validation that uses this list when I enter an account's name in the journal. Because the list is very long, I often times have to scroll up and down the list in the drop down menu that comes up at a cell I need to populate and when looking for the proper name of the account I needed to be there. I am looking to add a capability to my data validation list use when I would be able to enter several symbols, part of the name of the account I am looking for, and the list of accounts displayed for me to choose from would get shortened based on the symbols I enter. the symbols I enter do not necessarily have to be the first symbols of the account name I am looking for. (as sometimes, I do not remember how exactly the account is called - and so I just guess part of the name ... )
In the attached WB I managed to write some code (behind Sheet1) to change the Source table, itself, into the requested layout. My question is - could this be done by ONLY Worksheets functions - preferable without any helper column - if possible. note that all 4 columns data should be transported to the target table. The upper left cell of the target/new layout table can be put in cell G1 or in cell A15.
I have built a reporting dashboard to track emplyee efficiency .Within this dashboard i have produced a point scoring league table . I am lookinf for a forula that will automatically work out who my top performers are and arrange them in them in the form of 1st , 2nd ,3rd etc . I believe the answer to lie in the form of a pivot table , perhaps with a macro to populate the data , but would be grateful for come direction
