I have 2 columns of data:
Column A is SKU #
Column B is Bin Capacity
I would like to take each SKU and its corresponding bin cap and arrange them into a 16 column and 9 row table on another sheet.
For example A1, B1, A2, and B2 of the old sheet, should become A1, B1, C1, D1 of the new sheet. Also I need there to be a line gap between each table.
Anyone know how to do this?
This is what I got so far:
I want to delete alternative row in a worksheet or sorted so that I only have the following arrangements..
I have Data in Rows which as followings
Row 1
Row 2
Row 3
Row 4
Row 5
.
.
so on till 1000 data
I don't want Row 1, 3, 5 .... so on
The result should should be arranged as follows:
Row2
Row4
Row6
.
.
.
so on
My data are in cells A2:E7 I have 3 options first one is always in column A and rest 2 options are distributed in 4 columns B-C-D-E
I need to arrange all them to left as shown In G2:I7
ABCDEFGHI1FranJoneMichalPedroJoseLeft1Left2Left321Z71Z737Z17Z14Z17Z1751Z71Z7617Z17Z7Z17Z17Sheet1
I am starting a data sheet that I will be pasting from the internet into my data sheet daily, the problem I have is that the content data is pasting with blank rows between data and also there is one piece of data that is situated on the row below which i need moving to the end of the main data row, the idea is to have single data rows with no blank rows.
I have attached an example sheet showing the layout it repeats with only the amount of data that changes.
I have colored the data as follows:
Grey= Blank Rows
Yellow= Data Move to end of main row
Green= Unwanted Data
I have attached a work book to this to show what i want to do.
On sheet 'lorry 1'.
I have data in columns g to m.
I need that data to transfer to the lorry sheet as per example on sheet 'what it should look like'
It needs to segregate days and leave a line clear in between drops as per example
lorry 1.xlsx
i got data something like this...
m4-1
m4-10
m4-100
m4-2
m4-3
m4-30
i try to arrange it in ascending order...
m4-1
m4-2
m4-3
m4-10
m4-30
m4-100
I want to know is there any way to arrange bars in the chart with respect to their magnitude (ascending or descending) without making changes in the source data?
View 5 Replies View RelatedI'm trying to write code which allows me to cut and paste arrange of data from one sheet to the next.
the critical field is MRPC column i, I need to select all data that when I apply a auto filter allows me to cut and paste from the line below the header. And repeater using the a value
>=200
Cut all cells, rows paste.
then repeat this
>=155 to 199
>=145
PlantMaterialMaterial DescriptionSLocBatchL/OBMRBulkMRPCBinTypeUnrestr.BUnOpen QtyQual.Insp.BlockedMtyp100029PCV00703AAASADDLE CLAMP COVER1000R1120018.0008.0000.0000.000#N/A#N/A
How do I rearrange the data columns in a pivot table? I have a table with year to date months, open PO's, & budget numbers, but I'd like to change the order in which they show up in the pivot table.
View 2 Replies View RelatedI want to take a list of phone numbers in a single column(800,000+ rows)and spread the numbers across the page horizontally to fill the page. Each of the new rows will have probably 4-5 phone numbers. below is an illustration:
original:
column A
row1 5551234
row2 5553432
[Code].....
i want to pick data from every 2 columns and arrange it vertically, one under the other ;
sample data:
A 579751 579800 52151 52175 126721 126750
B 546451 546500
C 608971 609000 508081 508110 548941 548970
E 962701 962750 24851 24875
desired outcome:
A 579751 579800
52151 52175
126721 126750
B 546451 546500
C 608971 609000
508081 508110
548941 548970
E 962701 962750
24851 24875
I have a long list of accounts (for the purposes of of bookkeeping - keeping a cash disbursement journal) and I use data validation that uses this list when I enter an account's name in the journal. Because the list is very long, I often times have to scroll up and down the list in the drop down menu that comes up at a cell I need to populate and when looking for the proper name of the account I needed to be there. I am looking to add a capability to my data validation list use when I would be able to enter several symbols, part of the name of the account I am looking for, and the list of accounts displayed for me to choose from would get shortened based on the symbols I enter. the symbols I enter do not necessarily have to be the first symbols of the account name I am looking for. (as sometimes, I do not remember how exactly the account is called - and so I just guess part of the name ... )
View 10 Replies View RelatedIn the attached WB I managed to write some code (behind Sheet1) to change the Source table, itself, into the requested layout. My question is - could this be done by ONLY Worksheets functions - preferable without any helper column - if possible. note that all 4 columns data should be transported to the target table. The upper left cell of the target/new layout table can be put in cell G1 or in cell A15.
View 4 Replies View RelatedI have built a reporting dashboard to track emplyee efficiency .Within this dashboard i have produced a point scoring league table . I am lookinf for a forula that will automatically work out who my top performers are and arrange them in them in the form of 1st , 2nd ,3rd etc . I believe the answer to lie in the form of a pivot table , perhaps with a macro to populate the data , but would be grateful for come direction
View 3 Replies View RelatedI was wondering if i could arrange some sets of data (on one sheet) in fixed format and create a new sheet for each set of data using VBA
I have some sets of data in sheet (similar to the sheet "Raw data" of the attached file)
first four rows contain costumer-1 details,
next few rows contain bill details of costumer-1,
again,
next four rows contain costumer-2 details,
next few rows contain bill details of costumer-2,
and
table goes on for around 10-20 costumers
Now, I want to arrange the given set of data of each costumer into a fixed format (as sheet "reminder pad" of the attached file) and create a new sheet for each costumer
Also I want to add reference no to each sheet (with automatic increment for each sheet)
I am facing a issue with arranging a data in excel as weekly reports by getting a random input in the form as mentioned in the attachment
Needed like below
Name 1-Jan 2-Jan 3-Jan 4- Jan...........
Ram 0 L 0
Ravi 0 0 0
rohan 0 0 0
sheel 0 0 0
Inputs are like below format
name 2-Jan 8-Jan
Ram L 0
Ravi 0 0
rohan 0 L
sheel 0 L
Attached File : formal needed.xlsx
I have a problem whereby I have a list of data that has a date, a transaction and a balance. I want to be able to rearrange this data into multiple tables, one for each month.
The pictures below explain the situation better, on the left is the list of data I need to sort, and on the right is how I'd like the data displayed. So for the May columns I would like to display all transactions that happened in May and, depending on whether it is an income or an expense, the amount in the corresponding column.
i.e. so the finish result looks something like this:
Using Excel 2010. I'm writing a macro that sets up a workbook to be used for estimating at the beginning of a project. In the code I need to create multiple tables (formerly known as "lists") in the workbook. Then later in the code I need to refer back to those newly created tables. Currently, the code that creates the table is part of a loop that creates the table on many different worksheets. The problem of course, is that I have to name the Table, and then it won't create a table of the same name on the next sheet. Then, later in the code, I need to make adjustments to the table that was just created before looping to the next sheet.
Is there a way to create a table without giving it a constant name? Or by giving it a name that builds off of other info in the sheet? For example, I would be good with the naming the table after the sheet name: "Sheet1_Table" or such.
Code:
Sub Auto_Open()
'
Dim sht As Worksheet
If Range("A1") = 1 Then
[Code].....
I want to use a Pivot table to filter data to show just the studies that contain patients from the 'South' area?
As per example below I want to be able to see all the patients in all areas but only for studies that have patients from the south. I put together an array formula that works well for small tables but is too much with one one my sheets that contains 200,000 rows.
Before filtering:
Study ID
Study Short Title
Study Patient ID
Area
1346
LLP
90126
Northwest
[code]....
Let's assume, starting at A1, that i have table (8c x 30r)
and lets assume that in each of the columns i have 5 cells filled in with data at random.
What is the best way for me to produce a list of the data in each of the columns without having to go in and delete out all the blanks myself? I.e. i want to reproduce the table but without any of the cells which do not have any data in.
I have been trying to find a way to consolidate data in two tables, but can't seem to locate a good response. I have been toying with EXACT, VLOOKUP, HLOOKUP, MATCH, and SUMPRODUCT, but none seem to work for my issue.
Two Files - Call them acrendo.xlsx and office.xlsx
Both have a single sheet and contain first name, last name, and date columns. Office also has other information that I'm trying to merge into the corresponding row of acrendo.
Basically, I am trying to take the combined first name, last name, and date column from a row in acrendo as a single record, look for an exact match in office, and if it finds one, return the corresponding values in Coumns D, E, F back to acrendo. Someone suggested using the following sumproduct formula:
=SUMPRODUCT(--(A2=[ofc.ally.xlsx]ofc.ally!$A$2:$A$9329),--(B2=[ofc.ally.xlsx]ofc.ally!$B$2:$B$9329),--(C2=[ofc.ally.xlsx]ofc.ally!$C$2:$C$9329),E:E)
This always returns a value of 0, even if there is data in the matching row to be copied over.
One small complicating matter is that there may be duplicate entries in office (i.e. one row in acrendo may match to four rows in office). I can cleanse that if necessary, or preferably, if multiple matches are found, it would simply insert the additional rows into the acrendo file.
Also, is there a way to go through the acrendo file and check for duplicate records and delete them (e.g. if there is the same last name, first name, and date, delete the duplicates).
Can't do this manually as I have acrendo has almost 18,000 rows and office has almost 10,000 rows.
I am trying to merge data from 2 tables into a master sheet. Column goes like this 1 = customer ID, 2 = allocated number, 3 = age
The first table has around 2000 entries and 2nd table has about 1000, and they both contain some overlapping entries. I wonder if there is a simple way to go around this rather than manually looking at each individual entries as I will be more tables to fit in later on.
I have recently discovered the "data table" tool on Excel and have found it to be extremely useful for sensitivity analysis. The Excel help describes how one can create 1 and 2 variable data tables. Now I would like to create a data table using three variables, however. (I would like to vary three different variables and see what effect they have on one formula.) Is this possible with Excel? Can pivot tables be used this way?
View 2 Replies View RelatedI need to check data from two tables(A and B). They are supposed to match each other and my job is to check if there's error in it. Each row contains several criteria, and all criteria need to be matched. I need to give a report on the info that
1) contains in table A but not in B
2) contains in table B but not in A
3) contains in A and B but some of these criteria do not match..
I have basic knowledge of VBA. Forget to say, they are in different order. And even after sorted, the name may still unmatch with each other, so can not use formular like "=Sheet1!A1=Sheet2!A1"
Example:..........
I have a pivot table i created to pull in data in a tabular format so i can have all of my data fileds listed in a columns. On another page I am doing a dashboard that is using Countifs to pull in data to my report. What I am running into is the countifs are only working when i filter my pivot table to a certain value that matches, otherwise it will not pull the counts in..
View 5 Replies View RelatedI have to use data tables to calculate Net Present Value (NPV) by altering specific variables.
How to use the data tables function under the what-if analysis.
My sheet and calculations are all set up
But for the life of me i cant figure out how im going to tell excel that im changing for example wage costs and not fixed assets when trying to asses the NPV.
Ive done it manually by altering the figures on the Inputs and Data Sheet.
My NPV calculation is on the Workings and calculations sheet.
The data tables i have done manually are on the Inputs and Data sheet.
I've encountered is the spreadsheet attached. Basically I am trying to create a "complex" array (at least it's complex for me lol) to basically extract some values from tables and put them in one together. The array I thought would work is on the table with BRIGHT YELLOW BACKGROUND, whereas the table that could do the same work but more "manually" is with a RED border around it. I know I can do it manually as the red border table shows, but I've been trying all day to make it work with a complex array.
View 4 Replies View RelatedI need to find the most frequent number for each name in a large datatable, eg. Name1=12.
ColumnA / ColumnB
Name1 / 12
Name1 / 11
Name1 / 12
Name2 / 100
Name2 / 105
Name2 / 105
Name2 / 98
Name3 / 14
Name3 / 14
Name3 / 2
NameX / ..
Since Pivot tabels cant do the trick as far as I know, i'm clueless of how to proceed.
I need to put together a number of worksheets, each worksheet is to record project information that's happening at our production sites and all the tables are uniform in design. There also needs to be one 'master sheet' in which all the information added on the lower sheets is automatically added.
So basically I need to have four tables on separate sheets that feed information in to one table on a further sheet.
I'm having a problem with data tables. Actually, not with data tables, but links to data tables. Calculation is set to be automatic and values within data tables update alright, but links to those values do no update. So you may have a certain value in one cell within a data table, for example cell B5, and a different value in another cell which is just a link to cell B5.
View 5 Replies View Related
