My data are in cells A2:E7 I have 3 options first one is always in column A and rest 2 options are distributed in 4 columns B-C-D-E
I need to arrange all them to left as shown In G2:I7
ABCDEFGHI1FranJoneMichalPedroJoseLeft1Left2Left321Z71Z737Z17Z14Z17Z1751Z71Z7617Z17Z7Z17Z17Sheet1
I want to delete alternative row in a worksheet or sorted so that I only have the following arrangements..
I have Data in Rows which as followings
Row 1
Row 2
Row 3
Row 4
Row 5
.
.
so on till 1000 data
I don't want Row 1, 3, 5 .... so on
The result should should be arranged as follows:
Row2
Row4
Row6
.
.
.
so on
I am starting a data sheet that I will be pasting from the internet into my data sheet daily, the problem I have is that the content data is pasting with blank rows between data and also there is one piece of data that is situated on the row below which i need moving to the end of the main data row, the idea is to have single data rows with no blank rows.
I have attached an example sheet showing the layout it repeats with only the amount of data that changes.
I have colored the data as follows:
Grey= Blank Rows
Yellow= Data Move to end of main row
Green= Unwanted Data
I have attached a work book to this to show what i want to do.
On sheet 'lorry 1'.
I have data in columns g to m.
I need that data to transfer to the lorry sheet as per example on sheet 'what it should look like'
It needs to segregate days and leave a line clear in between drops as per example
lorry 1.xlsx
i got data something like this...
m4-1
m4-10
m4-100
m4-2
m4-3
m4-30
i try to arrange it in ascending order...
m4-1
m4-2
m4-3
m4-10
m4-30
m4-100
I have 2 columns of data:
Column A is SKU #
Column B is Bin Capacity
I would like to take each SKU and its corresponding bin cap and arrange them into a 16 column and 9 row table on another sheet.
For example A1, B1, A2, and B2 of the old sheet, should become A1, B1, C1, D1 of the new sheet. Also I need there to be a line gap between each table.
Anyone know how to do this?
This is what I got so far:
I want to know is there any way to arrange bars in the chart with respect to their magnitude (ascending or descending) without making changes in the source data?
View 5 Replies View RelatedI'm trying to write code which allows me to cut and paste arrange of data from one sheet to the next.
the critical field is MRPC column i, I need to select all data that when I apply a auto filter allows me to cut and paste from the line below the header. And repeater using the a value
>=200
Cut all cells, rows paste.
then repeat this
>=155 to 199
>=145
PlantMaterialMaterial DescriptionSLocBatchL/OBMRBulkMRPCBinTypeUnrestr.BUnOpen QtyQual.Insp.BlockedMtyp100029PCV00703AAASADDLE CLAMP COVER1000R1120018.0008.0000.0000.000#N/A#N/A
How do I rearrange the data columns in a pivot table? I have a table with year to date months, open PO's, & budget numbers, but I'd like to change the order in which they show up in the pivot table.
View 2 Replies View RelatedI want to take a list of phone numbers in a single column(800,000+ rows)and spread the numbers across the page horizontally to fill the page. Each of the new rows will have probably 4-5 phone numbers. below is an illustration:
original:
column A
row1 5551234
row2 5553432
[Code].....
i want to pick data from every 2 columns and arrange it vertically, one under the other ;
sample data:
A 579751 579800 52151 52175 126721 126750
B 546451 546500
C 608971 609000 508081 508110 548941 548970
E 962701 962750 24851 24875
desired outcome:
A 579751 579800
52151 52175
126721 126750
B 546451 546500
C 608971 609000
508081 508110
548941 548970
E 962701 962750
24851 24875
I have a long list of accounts (for the purposes of of bookkeeping - keeping a cash disbursement journal) and I use data validation that uses this list when I enter an account's name in the journal. Because the list is very long, I often times have to scroll up and down the list in the drop down menu that comes up at a cell I need to populate and when looking for the proper name of the account I needed to be there. I am looking to add a capability to my data validation list use when I would be able to enter several symbols, part of the name of the account I am looking for, and the list of accounts displayed for me to choose from would get shortened based on the symbols I enter. the symbols I enter do not necessarily have to be the first symbols of the account name I am looking for. (as sometimes, I do not remember how exactly the account is called - and so I just guess part of the name ... )
View 10 Replies View RelatedIn the attached WB I managed to write some code (behind Sheet1) to change the Source table, itself, into the requested layout. My question is - could this be done by ONLY Worksheets functions - preferable without any helper column - if possible. note that all 4 columns data should be transported to the target table. The upper left cell of the target/new layout table can be put in cell G1 or in cell A15.
View 4 Replies View RelatedI have built a reporting dashboard to track emplyee efficiency .Within this dashboard i have produced a point scoring league table . I am lookinf for a forula that will automatically work out who my top performers are and arrange them in them in the form of 1st , 2nd ,3rd etc . I believe the answer to lie in the form of a pivot table , perhaps with a macro to populate the data , but would be grateful for come direction
View 3 Replies View RelatedI was wondering if i could arrange some sets of data (on one sheet) in fixed format and create a new sheet for each set of data using VBA
I have some sets of data in sheet (similar to the sheet "Raw data" of the attached file)
first four rows contain costumer-1 details,
next few rows contain bill details of costumer-1,
again,
next four rows contain costumer-2 details,
next few rows contain bill details of costumer-2,
and
table goes on for around 10-20 costumers
Now, I want to arrange the given set of data of each costumer into a fixed format (as sheet "reminder pad" of the attached file) and create a new sheet for each costumer
Also I want to add reference no to each sheet (with automatic increment for each sheet)
I am facing a issue with arranging a data in excel as weekly reports by getting a random input in the form as mentioned in the attachment
Needed like below
Name 1-Jan 2-Jan 3-Jan 4- Jan...........
Ram 0 L 0
Ravi 0 0 0
rohan 0 0 0
sheel 0 0 0
Inputs are like below format
name 2-Jan 8-Jan
Ram L 0
Ravi 0 0
rohan 0 L
sheel 0 L
Attached File : formal needed.xlsx
I have a problem whereby I have a list of data that has a date, a transaction and a balance. I want to be able to rearrange this data into multiple tables, one for each month.
The pictures below explain the situation better, on the left is the list of data I need to sort, and on the right is how I'd like the data displayed. So for the May columns I would like to display all transactions that happened in May and, depending on whether it is an income or an expense, the amount in the corresponding column.
i.e. so the finish result looks something like this:
I have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.
To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.
Current data structure looks like
Variable 1
Variable 2
Variable 3
[Code].....
I am having trouble filling a formulae series to the left on one spreadsheet, the fomulae being references to another sheet.
For example, I have two sheets 'Mtce Options' and 'Base Case'. In 'Mtce Options' I have the following formulae
A B C
1='Base Case'!A15='Base Case'!D15='Base Case'!G15
I want to fill to the left, incrementing the column references by a factor of 2 each time, eg. next two should be ='Base Case'!J15 and ='Base Case'!M15.
However, if I autofill to the left by highlighting A1, B1 and C1 or just B1 and C1 all I get is an inappropriate reference such as ='Base Case'!D15 or ='Base Case'!F15, respectively, in D15.
I am trying to sort some data and I have gone through the custom sort feature and it is not sorting the data correctly. I am trying to sort from left to right EK6:FE66. The top 3 rows have text and there are numbers from row 9 down. The sort feature sorts the top 3 rows but wont sort the numbers below from left to right. I have set the cells to be formatted as text.
View 1 Replies View RelatedI have a big table with a lot of data in it. I basically want to get rid of all of the empty cells, so that all the data that is there for the one person is all next to each other.
All the people's names are in a row for themselves so the empty cells would have to move to the left.
I am trying to copy values and dates from a row if it matches the numbers in the left column.
I attached a simplified version where I explained how it should be done.
my question is how to return blank cell if i have no data inputted in left cell.. or if AH9 is blank or no data inputted AI10 will be blank using this formula.. =IF(AH9<75,"A",IF(AH9<82,"B",IF(AH9<87,"C",IF(AH9<92,"D","E"))))
View 2 Replies View RelatedI have a workbook which has data from 2 different time points (6 and 12 months) and this is signified by a prefix to an ID number which is a letter (A or B) and a number:
I need to analyse data separately so I'd like to create 2 separate workbooks, once which imports all of the 6 month data (1 row per case) and one for the 12 month data.
I thought that this would be based around a VLOOKUP of the first 1 or 2 characters but I can't work out how to integrate this with an 'IF' and link it to another workbook.
I am using Data Validation and I don't want the user to go past a cell without putting in an entry. When I leave the box (ignore blank) unchecked it doesn't do anything after I have protected the document.
I have a macro that creates mutiple, though varing numbers of, columns. Once the columns are created, a blank column is set up to the right of them. When the data is ideal, only one cell in each row created by the populated columns will have data in it. So lets say that in this example, the macro created 23 columns of data. A1 is blank, B1 is Widget, and C1 through the end are also blank. I need a macro that will look at the rows and find the populated column and copy that string of data to the blank 24th column (to the right) created after the poulated columns. So X1 (the 24th column) will have Widget placed in it.
Now I need it to do one other thing. In another example, let say there are 5 columns created this time. In the third row, there is data in A3 and D3. If they are the equal to each other (A3 value being 143256 and D3 value being 143256), then I need the 6th column created to have 143256 placed in it. However, if the data differs ( A3 value being 143255 and D3 value being 143288) then I need the word "Scrap" to appear in the sixth column.
I want to grab everything left of the last occurrence of "." in a string, and in the next cell everything right of the last occurrence of "."
so say the string is 111.111.1.222
column 1
111.111.1
column 2
222
my current code (which works, but its messy) for the first cell is
Data is input into my spreadsheet. It is not always in the same cell, and is not always the same length vertically. I want the user to select the top left of the data and then automatically do text to columns. Here is my code that is not working! :
Sub TextToCol2()
Dim rng As Range
Set rng = Application.InputBox(prompt:="Select a cell", Type:=8)
ActiveSheet.Range("rng:A" & Range("A65536").End(xlUp).Row).TextToColumns DataType:=xlDelimited, ConsecutiveDelimiter:=True, Space:=True
End Sub
Im going to try to make this as clear as possible. I cant use my actual data because it wouldnt make any sense to anyone so Ive made up an example problem. Here goes...
Lets say in Sheet 1 I have two descending columns of data. Column A is MODEL of Vehicle (Civic for example). Column B is vehicle identification number (xxx for example). Sheet two has 4 columns of data, but only one is really required for this example. Cell A1 is the MAKE of vehicle (Honda for example). Directly below that in Cell A2 is the MODEL of the vehicle (Civic). There are then a few rows of empty space until it gets to the next vehicle MAKE and MODEL.
So in Sheet1 there is a long list of MAKE's in ColumnA and VIN's in ColumnB. Sheet2 Has a long list of MAKE's and MODEL's in ColumnA and random data in other columns.
What I want to do is assemble a Macro to start in Sheet1-A2, read the MODEL then copy the corresponding Vehicle Identification Number in B2. I then want it to go to Sheet2-A2 and start searching downward until it comes across a matching MODEL. Once it finds the match I want it to step downward 2 cells and paste the Vehicle Identification Number. Then return to Sheet1-A3, and repeat the process until EOF.
I have an excel document with a list of about 12,000 names/addresses. They are currently displayed like this:
A B C
1 <name1> <name2> <name3>
2 <address1> <address2> <address3>
3 <zip1> <zip2> <zip3>
...and I want to re-arrange them so they are displayed horizontally:
A B C
1 <name1> <address1> <zip1>
2 <name2> <address2> <zip2>
3 <name3> <address3> <zip3>
Is there any possible way of doing this quickly without copying/pasting 12,000 lines of text?