Essentially what I want, is to type a medication in, lets say, A2, and for a macro to produce a response in B2 based off of grouping criteria from another worksheet. My workbook better explains what I would like to see happen. A macro would be best for this, right?
View 7 RepliesThe attached file shows what I'm trying to do - I'd like to fill in the data in the top left corner table (blue-shaded) with the data combined from the two other tables. Think of the Greek letters as names that are grouped into the groups named {A,B,C,D,E} (the names have no significance, it's just an example).
I was able to do so using an array formula and an extra column (yellow shaded) as you can see in B2 - however, this solution doesn't suite my case because the actual tables will be coming from automated processes and cannot be easily manually altered.
I tried inserting the array formula into the sumproduct formula - see B3 - but for some reason this doesn't behave the same as when the array is outside the formula. I should also mention that I came across a user defined function solution - this too is not so suitable for me right now.
I have a long set of data that I extract a "table" out of based on index matching controlled by 4 different criteria. This part is working as intended. However I need to format the cells with the corresponding "fetched data" based on another criteria. Makes sense? Have a look at a spreadsheet i made representing my problem. It has comments for the problems.
excel tableformatting problem.xlsx
Each week I run a report that produces over 2,000 rows. I have to manually go through and delete things, by the time I am done, there may only be 320 rows left. I would apply a recorded macro, but the report is not consistent each week. There may be more or fewer rows depending on the week.
I would like to be able to run a macro that looks in column B for a specific value and if it contains that specific value, I would like the cells to the right of it to have their contents cleared.
Next, in column C, I have...
Employee2's Name
Employee2's Number
SPACE
[Code]....
I would like to be able to delete the rows, starting from Employee 2 to just before the second SUB TOTAL.
So, all I would have left in column C is
SUB TOTAL
SPACE
I am trying to work out how to stop input into a document if a certain response is selected from a form in excel 2007. Basically, i need some programming so if a question is answered a certain way - the user cannot continue completing the form as it becomes "locked" and an error box comes up saying this is the case - and what action needs to occur. As the list is a data validation list - i cant just separate it out - so that if one response is chosen over another then the error message appears.
For example the question might be "Will you use contractors". If the answer is Yes, the cell turns red and an auto response fills the cell (VBA has already been written into the document for this to occur). What i need additionally is an error box to come up saying "This audit cannot continue as a Minor Plan needs to be completed" and the rest of the questions responses say something to the same effect.
I'm building a sales tracking spreadsheet and need to find a way to auto group certain rows based on their cell value. In my tracker I'd like to group by company name and be able to collapse it to look at the details.
Here's an example of my starting point and how I'd like the data to look like in the end.
Starting State:
Company Name contact name sales stage Forcast amount
----------------------------------------------------------------------------------------------
Company A david brown contracts 10,000
Company A John Smith Won 20,000
Company A D'Arcy Davis Canceled 10,000
Company B
Company B
Desired State:
Starting State:
Company Name contact name sales stage Forcast amount
----------------------------------------------------------------------------------------------
+Company A 30,000
+Company B
I have a permutation with repeatition of 3 letters in 9 digits 3^9, and I'd like to be able to group all posibble permutations something like:
BBBBBB+2+1 = BBBBBBCCD = 252 rows
BBBB +3+2 = BBBBCCCDD = 1260 rows
5+4
5+3+1 and so on
I have situation where my account (from trail balance) will present to different grouping based on reporting, example below. How I can formulaize or using VBA to sum to amount based on the format.
Example :
if i want the format b : if i sumif HCM - the total should be from account code a1001,a1002,a1003 and hrd will sum up based from account code a1004,a1005,a1006
Account Code
format a
Format b
format c
format d
format e
a1001
adm
hcm
adm
adm
hrd
[Code] ........
I am working with a large data set containing information about certain items
The items are structured so that they all have seven main sections. Within each main section their is a variable number of parts, that the items are made of.
The items uses only one part from each main section. So all items consists of seven (identical) main sections and seven parts.
I am looking to group items togheter which are precisely identical. I mean the items that uses the same part in all the main sections.
Is there an Excel/math wizard out there? I have all the data, but I can't make Excel do this task for me..
If my spreadsheet has columns A-H.
A is Date
B is Room Number
C is Location
D,E,F all have numbers results in them.
G is the average of D,E,F for each person
H is group average.
If I want to define a group average in column H where it calculates the average of a group that attended the same location, date and room, for each group that attended would that be possible?
So For Example (Columns DEF left out for clarity)
Date
Rm
Location
G Inidivual Average
[Code]....
So because room number changed it calculated as a different group. Is this possible?
i need to group the values based on A, B, C columns.
which means all "Chickpea_B-1_11area_3d.csv " will have same timestamp and mean_area_3d values, only D column vlaue changes.....
in the same way, all "Chickpea_B-1_12area_3d.csv" will have same timestamp and mean_area_3d values, only D column vlaue changes.....
now i need all Chickpea_B-1_11area_3d.csv values to be grouped into one. and chickpea_B-1_12area_3d.csv values to be grouped into one..
if you see the output sheet, you will understand clearly, which i did manually for your easy understanding...
i did manually and also attached the sheet for your kind reference and easy understanding... where i grouped all Chickpea_B-1_11_area_3daver_domain_area, fill_factor, leaf_angle_theta, plantHeight, projected_leaf_a into one.... where b and c cols are same for all the D E F G H I Values. in the same way for Chickpea_B-1_12_area_3d and all other below values to be grouped.
like this i have to do for 1000 files. please find the attachment...
I have a pivot table (vendor spend report) which has over 7000 rows of data. There are 38 vendors (some vendors appear multiple times i.e. Accenture Itay, Accenture Germany, etc.). Vendors names are in column B.
I need to have the VBA script search for each of the vendors (and related names) and group them together. Also, last one is for all the MISC. vendors which need to be group together (one's that dont belong to the 38 managed vendors).
Also, I need to rename the Group for each one; rather than Group1, I need to name it "Accenture All" etc...
I have a date field 08/09/2011 and want to monitor an item to ensure it's "Approved" before it reaches this date.
The groups are:
Late = this date or past
Within 1 week
Within 2 weeks
Within 3 weeks
Over 3 weeks
How to do this, I tried Nested, and I've tried lookup but I'm not sure how to tackle it.
Attach below are 2 sample file and inside it consist of device,grouping and lb1,tb1,ab1. How do I use excel formulae based on 2 condition and set from vlookup with 2 condition file to vlookup with 2 condition 1 file like a vlookup.
View 11 Replies View RelatedI am having difficulty figuring out how to get my chart title to automatically update when my chart changes via filtered criteria. I can get it to change by clicking the title bar on the chart, but would like the title to automatically update as soon as I select new criteria and the chart changes.
View 9 Replies View RelatedI need a VBA macro code to get the output like in the excel file which I have attached with this thread. Which means, I need to group the data for every two hours. in the output I need all 4 cols namely A, B, C, D along with extra col namely, interval based on which I need these groupings to be done..
The code has to be really flexible so that it works for all dates and times in the files. Because like this I have to do for 2000 files.....
Original link: [URL] .....
plant area.xlsx
Is it possible to have Column E automatically enter a value based on a 4 digit number inserted into Column C?
I have about 200 different 4 digit numbers that can be entered into Column C and 8 different corresponding values that need to appear in Col E... Would this be possible / difficult?
I have got 2 sheets:
- list (list of transactions)
- accepted (accepted transactions).
I want to make macro, which will:
1. select max value from sheet.accepted "B:B"
2. enter max value +1 in sheet.list "B8"
3. automatic fill down from B9 to the end of list with number increasing by 1 (in B9=B8+1, in B10=B9+1 etc.)
I tried with this:
I have an Excel file with multiple worksheets. 4 of these worksheets have the same format and have concatenate formulas in cells D14 through D28. What I need is an automatic pop-up message to tell me when I open the file if on any of these 4 worksheets text is generated from the concatenate formula that matches either "air cooling unit", "air heating unit", or "ceiling".
And, if so, I need for the pop-up to state the name of the Worksheet/tab and which of the above text strings match. For example, if one tab is named "6-5-09 C" and within the range of D14:D28 the text "ceiling" is listed, the pop-up should read something like, "Maintenance Needed for ceiling on 6-5-09 C!" If there are multiples on multiple worksheets, then I'd want all of them listed on the same pop-up. Then I would want to be able to click OK or CLOSE to close the pop-up. If I can even color the pop-up a color different than the regular gray, that'd be cool too.
I would like to enter a vacation code in E5 (V12) and have it automatically enter "VACATION DAY (12 HRS * $15/HR) in K5 and calculate the amount in L5. Of course, there are variables involved here:
V indicates that it is a vacation day.
12 indicates the number of vacation hours to be taken.
The $15/hr comes from the value in I5.
I don't know if this should be handled as a VLOOKUP along with other methods or if this is something that needs to be handled in VB?
i have an excel sheet which contain some standardized chemicals with due date for standardization i want excel sheet sending email for outlook email list if the due date is older than today by 2 days. my work and i'm not clever using macros and VBA the file is attached
View 1 Replies View RelatedSo the title isn't really totally descriptive but it was all I could come up with. I have a work book that has 30 identical sets of 5 cells for users to enter in information. Some of my users will not need all 30 sets. I'm wondering if there is a way for the user to enter the number of cells they need and have excel then format so they have the desired number, instead of 30. Then have excel change all the instances of this number in formulas so that it matches the new number of cells. I hope I explained this well enough for someone to help.
View 9 Replies View RelatedI would like to have a cell automatically change text based on a conditional formatting formula. When the cell color is red, or the formula is true, then display the word "Expired". Can a formula be devised using results from conditional formatting?
This is being used for expired CPR 2-year certifications. When the certification expires, the cell currently turns red (based on a cell formula) and I would also like the word "Expired" to replace the date.
My condition formula is: =TODAY()>A2 + 730
When I go one column and Click custom filter and give the command one number and or another numbers ( I Have attached an excel sheet with screen shot) This filters the data, and I need to copy the same and paste in the next sheet.
I have to do like this for about 20 times for 20 sets of data). I have already done this and pasted the data in sheet2. I did everything manually. ( sample sheet is attached) I need a macro to do this work for me.
When I run the macro If get 2 text boxes I can enter the numbers. and click ok,the data has to filtered in sheet1, and result has to be pasted in the next sheet.with the header. Again I will run the macro i will give 2 numbers and the result should be pasted in sheet 2 after the 1st set of data leaveing one row as blank. ( exactly like the sample data in sheet 2). If I run the macro for 10 times giving 10 different numbers, the result should be pasted one after the other in sheet 2.
I would like to automate a sheet to report statistics of projects based on a single cell that is the year that a user manually inserts. I've got a separate worksheet with all dates manually set up for next 10 years and would like it to be read by formulae in a reporting worksheet based on the year that user enters.
So if I specify year 2014/15 (financial year), I would like the cell C1 under "Reporting" sheet to display 1/07/14 predetermined in "Dates" B3, if I specify 2015/16, the cell C1 will read 1/07/15 from "Dates" B6 and so on.
I could do it with "IF" function but there will be too many nested IF functions in a lot of cells (hundreds if not thousands). This may make my file size very large.
Attached is a simplified example of what I mean.
I want to create a monthly timesheet which contains 9 columns for
(Date, Day, Project no., Activity, Time In, Time Out, Total Hours, OT Hours, Remarks)
I have used IF Function to calculate Total Hours & OT hours automatically. Time IN & Time OUT, Project No., will be entered manually on daily basis.
Weekday function is used in the Day column to return the corresponding day of the date in the Date column.
Name of the Month and Year will be manually entered in the designated cells I3 and I4 respectively.
Now the solution I am looking for is, the dates should be automatically entered in the Date column (in cells A8 to A38) based on the Month & Year entered in cells I3 & I4. Dates of the corresponding month of the year should only be filled in. (If a month is not having 29, 30 or 31st day, the corresponding cells should be left blank. i.e. nothing should be displayed in the corresponding cells). I am looking for some sort of formula to enter in the cells of Date column (A8 to A38) achieve this. I have searched the forum and could not find anything which could at least give me an idea about the kind of function or formula to be used.
Attached here is the time sheet I am trying to create.
I am trying to achieve a response from a msgbox which will either continue with the sub or exit. I think my code is right but it doesn't seem to work and just carrys on regardless.
View 6 Replies View RelatedI'm trying to find a formula I can use to figure response time. The working hours are 7:00 AM to 3:00 PM and I do not want to count the hours between 3:00 pm and 7:00 AM of the next day.
Example:
Cell A1 has the call in DATE 12/06/07 and cell B1 has the call in time of 10:00 AM.
Cell C1 has the response date of 12/07/07 and cell D1 has the time of 9:00 AM.
So what I need is a formula in cell E1 that would count from 10:00AM untill 3:00 PM on 12/6/07 then pickup the count on 12/07/07 at 7:00 AM and go untill 9:00 AM.
So in this Example the final response time would be 7 hours or 7:00.
Trying to accomplish a bit of data validation...
4 cells
A1 B1 C1 D1
The only acceptable input for these cells in a 'x'
If I place an 'x' in any one of the four cells than the other three must be blank.
I am trying to create a macro based on value in a cell. For example if J2 is greater than 1 then run macro A. The code I have is:
If j2 > 1 then
Call MacroA
The file imported as a text tab deliminated file and I believe that even though J2 might be 10.05, it does show up in the formula bar as just 10.05 not =10.05. I don't if this makes a difference. The J2 cell could either bland or values ranging from 1 to 100. If it is blank I want to run a different macro.