when a write a code the equivelant erro apper in the anothe cell
For example:
When i write faulty code (211) in cell A1. The (CRT cable disconnected) automaticly apper on B1
So, What is the formula for that.
Kindly find attached file( Faulty Log). You can find in faulty code that when you enter a number say (211) an automtic faulty error show in the beside cell
Is it possible that the very same macro runs kind of incorrectly while it's being run as "automatic" (F5 key) and absolutely correctly while run manually, line by line via F8 key?
I am trying to debug the code but no luck as I get proper results while run manually.
See the attached sheet. I am trying to add together two figs which are linked to calculations which have formula built in to stop error messages when there is a 0 / 0 = #value type error. However when these two cells are added, if the cells are blank I get an error message. And if only one cell has a value, I get "" with my existing formula. what I need to do to get a result of 7 if for example cell A4 = "" + B4 =7. At the moment my formula shows "" in the sum total of these cells
View 5 Replies View RelatedI have a userform that is working perfectly, but when I try to make it an add-in I can't even get it to load. When loading the userform as an add-in I get the error "Run error nr. '9'.: The Index is out of the interval" (freely translated from Swedish to English). The code I'm using to load the userform is
View 3 Replies View RelatedI've created a userform on one computer which launchs when I open the excel workbook. The userform contains comboboxs and a picture. But when i saved it on another computer and tried to open it and it errors. (Run-Time error 9). (Still works fine on the computer that created it). All references are to this workbook only. Userform is contained within the Forms folder of this workbook(not personal.xls) and the userform name is PDM_SPLASH1. Also, if i go into VBA I can see the form, but it wont launch when i try to play in manually. (Run-Time error 9)
Private Sub Workbook_Open()
Worksheets("Launch Page").Select
Worksheets("Instructions").Visible = False
Worksheets("SelectDB2").Visible = False
Worksheets("REPALIGNMENT").Visible = False
Worksheets("PDM").Visible = False
Worksheets("TABLES").Visible = False
Worksheets("DISPENSING").Visible = False
Worksheets("DISPENSED").Visible = False
Worksheets("OpportunityAnalysis").Visible = False
Worksheets("ENGINE1").Visible = False
Worksheets("POTENTIALCONTRACTLOSS").Visible = False
PDM_SPLASH1.Show
End Sub
Ive created a userform that I want to have input data into specific cells in my worksheet. I have the userform created, and some of the other VB stuff written, but it is far from being functional. I have come across the first of what to is to be many problems (Im pretty rusty at VB).
I have a button on my spreadsheet that is supposed to show the userform using this macro
[Code] .....
When I click the button, it breaks at "Form1.Show" giving me "Run-time error 424 : Object Required".
Is there a way to count cells that show up with the "Not Available Error", or even better, is there a formula that will count all cells in range range, except those with the "Not Available Error".
View 5 Replies View Relatedi have a very large userform that has lots of info on it. if the excel file is closed and you open it (userform shows on open) no matter how i set it up to show the userform everytime it hits the line "userform.show", no matter where in the code it is ... it produces a fatal error and closes excel. I can not figure out how to solve this.. i have tried everything. I wish i could post the file but i can not because of privacy issues. If anyone knows anyway around this, another way to show a form, or anything please help i will be thankful forever.
I'm getting an "Error 400 - Form already displayed; can't show modally" error from a UserForm project I've been making. It's attached below. How it *should* work:Use the button "ENTER NEW DATA" to open the UserForm. Submitting the Form should insert the data into a new row below the already filled ones. (the range of Form data starts at row 7)Click on a Non-Empty, Protected cell of Form data, and the UserForm should open, containing the data of that row within its corresponding fields. Submitting the Form should modify only that very row from which it was sourced.When you close the workbook (OzgridMST1.xls), the Form data should be copied into another workbook (on Sheet1) on the same level as OzgridMST1. (I couldn't include it in the . ZIP file since it would have been too massive... Just create a new workbook called FormDBTrial1.xls on the same level.)
Problem(s):When i fill-in and Submit the UserForm for a second time (by either the button or a Non-empty cell), the Error 400 appears and traces back to [UserForm].Show in the Sheet code. I've double-checked my code and can't see what the problem is.When i Submit the Form through the Non-empty cell, it submits into a NEW row, and not the same one! My code used to work, I've tested it many many times. I've triple-checked my code, can't figure.Finally, when I close the Workbook, an Error comes up saying it can't find FormDBTrial.xls, even when it plainly does exist on the same level, same folder, etc.
Everything worked fine until I added the "Copy To Another Workbook" functionality. Been over it and the forum so many times my head is spinning...
I have an excel 2003 template containing a userform that is displayed using the workbook_open event.
The userform causes excel to crash with file/path error 75. i have tried many suggestions given on ozgrid and several other forums with no joy.
When the userform crashes, the debugger stops on DataFormNew.show.
I have added stop commands in the initialise procedure to see what is going on and it appears that my userform has disappeared!
to upload the excel template and any other information required to get this sorted.
its size is 765 KB which exceeds the size limit to attach to the post.
here is the workbook_open macro:
Private Sub Workbook_Open()
'On Error GoTo MyError
'Call UnProtectAll
'Dim frm As UserForm
'For Each frm In UserForms
' Unload frm
'Next
I have a userform with a combobox (cmbSearch) , a textbox (textbox1) and a listbox (listbox1)....and a commandbutton (cmbFind). This userform is used for searching records in my worksheet....where user selects a "Search By" category from the combobox and then enters relevent text search criteria in the textbox....and all the search results are shown in the listbox. This part works fine untill someone tries to search a "non-existent" record. e.g. a customer name thats not in the database and it gives an error. I would incorporate in my code to have a Message box pop up on these type of searches saying "textbox1.value Not Found!" insetad of error message.
Private Sub cmbFind_Click()
Set c = Range("a65536").End(xlUp).Offset(1, 0)
'write userform entries to database
Dim DataSH As Worksheet
Set DataSH = Sheets("ComplaintData")
With DataSH
.Range("L1").Value = cmbSearch.Value
.Range("L2").Value = TextBox1.Text
.Range("N1"). CurrentRegion.Clear
.Range("A1").CurrentRegion. AdvancedFilter Action:=xlFilterCopy, criteriarange:=.Range("L1:L2"), copytorange:=.Range("N1")
End With
lstSearch.RowSource = vbNullString
lstSearch.RowSource = "outdata"
End Sub
I created a form that my employees could use to log their work. When I toggle between the combobox and the qtytextbox I get an "invalid property value" error that debugs to the line of code that opens the userform. I have no idea how to fix this. The spreadsheet has a button that shows the userform. This code is:
Private Sub rectangle1_click()
If frmLCWork.Visible = False Then frmLCWork.Show
Exit Sub
End Sub
The userform has a combobox for employees to select the completed "task", a quantity textbox and then an "add to log" button. The form code is:
Option Explicit
Private Sub cmdAdd_Click()
Dim sStep As String
Dim Row As Long
'check for a task
If Trim(Me.cbxTask.Value) = "" Then
Me.cbxTask.SetFocus
MsgBox "Please specify which task you completed."
Exit Sub
End If....................
When I protect my worksheet the option buttons, on occasion, give the error message "The cell or chart that you are trying to change is protected and therefore read only. To modify a protected cell or chart, first remove protection using the Unprotect sheet command. You may be prompted for a password." Sometimes I click on an option button and this error pops up and other times i can click the same button and no error occurs.
View 1 Replies View RelatedI need a macro where user choose a value from validation, automatically lock the other cells and should show an error message.
Here is what I am looking for. User will choose Yes or no from cell H15 validation. If user choose "NO" from the validation then all other cells has to be locked in the workbook automatically except Cell H15 and a msg box needs to appear stating: "Select Yes from the validation".
Below is a macro I recorded to help copy 'Paste Special - values only' data between two spreadsheets that have different colour and conditional formatting in cells.
However, if this is run and there is no data to paste, it throws up the End and Debug error.
Any chance that someone knows that if there is no data sitting on the Clipboard, then a msg box would appear saying "Please select the data you require to be copied" in the message box.
Sub data_input()
ActiveSheet. Unprotect
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("B5:AG4804").Select
Selection.sort Key1:=Range("B5"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
Range("B5").Select
ActiveSheet.Protect
End Sub
When loading my workbook, my userform loads perfect, but when I go to hit the "next" button. It crashes with the error:
"Path/File access error."
The next button code, quite simple: ....
I cannot figure out how to get my error handler to work, or actually, not work. It seems to work fine when there is an error, but the code still gets read even when there was not an error. Basically, I am trying to open a file, which may or may not be there. When it is not there I want a message to pop up informing the user. However, when the file is there and it opens, the error handler still gives the message box. Any ideas what I am doing wrong?
Private Sub btnOK_Click()
Application. ScreenUpdating = False
Dim LCSfile As String
LCSfile = frmSelectFile.Listbox1.Value
On Error Goto ErrHandler
Workbooks.Open Filename:=sPath & sDate & "" & LCSfile & "QUANT.CSV"
ErrHandler:
MsgBox ("File is not quantitated. Please select another file.")
Application.ScreenUpdating = True
End Sub
I have a column of data held in column B.
I am required to show the following.
If there is data in the cell then it is to be left. If there is no data in the cell then I would like to show the value 0.
I have tried using a circular reference, using the formula =IF(ISBLANK(B1),0,B1) and other similar formulas but they dont work as the formula overwrites the data in it.
do I need a macro?, or conditional formatting?
I have 2 different formulas that I need changed in a similar way.
The first formula is for cell AV11:
=SUM(BI11,BP11,BW11,CD11,CK11,CR11,CY11,DF11,DM11,DT11,EA11)+10
Every cell starts off blank.
What I need is for cell AV11 to always start off blank until data is entered into one of the other cells. The problem is that since the sum always needs to be +10 only when data is entered in the other cells, I don't know how to keep 10 from showing in cell AV11 when no data is typed in the other cells.
The other formula is for cell CO39:
=(CU8)+3
I pretty much need the same thing. If no data is entered in cell CU8, then I do not want cell CO39 to show the 3.
I have this worksheet with 2 buttons and 2 textboxes.the first button is named search literally to search the items inputted in the textboxes and the second button is clear which clear all the inputted items in the textboxes and the search field. I manage to code those things however I have a main problem. How am I suppose to linked a checkbox with those items?
For example I searched this particular item so the checkbox corresponding to that item must show up in the left most column of it. and if I searched multiple items those checkboxes must show up too. I am having a hard time coding and trying since I am new in vba. I also attached a sample worksheet. I am using excel 2007.
Search.xlsm
Got the roundup part which is ROUNDUP(F2,-3) but having hard time with the other part If the cell (F2) is 0 or below would like to show zero. I am attaching a spreedsheet so you can see what I'm trying to get at.
View 5 Replies View RelatedI have an excel 2003 sheet that collects data from Infopath forms. The forms are to record students who have broken school rules, when, where, repercussions etc. One column shows their class and there is a separate column for each rule broken.
I want to create another sheet to show each class down the rows and the columns to show each school rule. Therefore, each cell would show the number of each particular rule broken for each particular class. I have tried to do countif and sumproduct (if on sheet 1, column B the class is KA and on sheet 1, column M, the rule is bullying = how many times this has occurred).
In Cell C4 I have the time 8:00 AM. In Cell D4 I would like to show C4 plus 8 hours.
When I do the simple calculation of:
=C4+8
That doesn't work.
I want a cell to show a number based on a sum of another cell i.e.
50 shows 1
51 shows 2
101 shows 3
If there is more data in a cell than can be displayed due to the size of the cell, is there a way to get a real-time preview of all the contents in the cell just by hovering over or clicking on the cell?
View 2 Replies View RelatedI have a column of dates in column E1:E100.
E1 = 25/06/2012
E2 = 02/07/2012
E3 = 09/07/2012
etc.
In column F1:F100 I will insert "Y" in the one of the blank cells next to one of the date cells in column E1:E100.
In cell B1 I want to reference where the cell in column F is "Y" then use respective date in column E.
e.g.
If i have "Y" in cell F1 then in B1 I want to show E1 (25/06/2012).
If i have "Y" in cell F2 then in B1 I want to show E2 (02/07/2012).
If i have "Y" in cell F3 then in B1 I want to show E3 (09/07/2012).
etc.
How can I get the Tab name to show up in a cell?
View 8 Replies View RelatedI have an Excel VBA form to enter data into a worksheet. Last column of my worksheet CC contains a formula which calculates some input fields. It is a very long though simple formula.
Is it possible that while I am entering the data in the form, a field in the VBA form itself keeps showing me running result of the inputs made based on the formula in the worksheet column CC? I don't know how to write that long formula in VBA so want to find out if there is a way around it.
If not possible, how about while the data has been entered in the form, there is a button CHECK RESULT. Clicking this button temporarily enters the form data to spreadsheet, populating CC cell and that result shows up as message box while the VBA data form is still open. This result message box could have two buttons, CONFIRM ENTRY or CANCEL. If cancel is clicked then the data entered in the spreadsheet is deleted. If confirm is clicked, then entered data stays.
I am trying to use the if statement, if a cell = a cell that has a word in it then show content of another cell that has a name in it.
View 5 Replies View RelatedI have e.g.
1000, Amerika (USA)
2000, Germany (DEU)
3000, Spain (ESP)
How can i put in another cell with formula:
Amerika (USA)
Germany (DEU)
Spain (ESP)