I want to calculate the total number of characters in a cell or group of cells. Also, as a second step, I want to indicate which cells have a total number of characters greater than a certain value.
View 9 Replies
My spreadsheet is set up so that Column A has dates and Column B has a value. How can I calculate the total number of values for each day of the week? I've tried a few formulas but they either didn't work or didn't actually take the value into consideration and just counted all the 'Mondays'. I'm not sure if that's clear enough, but if we're just looking at Mondays to simplify it:
Monday, 1 January 2000: 2
Monday, 8 January 2000: 5
Monday, 15 January 2000: 0
Mondays: 7
Basically, I'm trying to have a cell (eg.A1) where i can input a dollar value and when enter is pressed, on another cell (eg.A2) the dollar value gets added, then the original cell (A1) is cleared for the next input.
Then when I put the next input (A1) I want it to add on to this running dollar total (A2) and yet again A1 is cleared for the next input.
In addition to this I require an additional cell (eg.A3) that when each time a value is added in A1 it counts the times this is done.
I'm trying to have a cell (eg.A1) where i can input a dollar value and when enter is pressed, on another cell (eg.A2) the dollar value gets added, then the original cell (A1) is cleared for the next input.
Then when I put the next input (A1) I want it to add on to this running dollar total (A2) and yet again A1 is cleared for the next input.
In addition to this I require an additional cell (eg.A3) that when each time a value is added in A1 it counts the times this is done.
I need to set up an easy to use spread sheet for my office. It needs to be able to calculate the running total spent of fuel, as well as include any discounts we get and then calculate our total savings.So basically, total spent and total saved.
View 3 Replies View RelatedI need a VBA code to find the number of characters in each cell and display the result in next column.
For Ex:
ColA:
HI
who
There
output should be
ColA,ColB
HI,2
who,3
there,5
I have shown example for 3 rows only but there are chances like it contains more than 3 rows(Dynamic rows).I tried by creating Range variable but I couldn't succeeded.
in ROW 1 I have columns A thru AD populated with a number in each cell. what I need to do is take that number and fill the below cell with the number times a set character. for instance, A1 has "4" in it, so I want A2 to look like "----"
View 3 Replies View RelatedI am looking too limit a cell too only contain 5 or 7 characters.
I can limit too one length, i.e. just 7, using the data validation function.
I'm creating a spreadsheet (Excel 2003) in which a user enters data in several cells, each of which will permit different numbers of characters (to include spaces). For example, in the first cell, the user will be limited to 50 characters, in the second cell, the limit is 30 characters, and so on.
I found the data validation error alert feature, but want to give the user a cue that the entry is too long so they know to stop typing before moving to the next cell. If they only are alerted when they finish making the entry, they might not take the time to properly reconstruct the entry to meet the size limitation. I'm trying to make this more user-friendly.
Is there a way to set up the worksheet so the user knows that the entry is approaching the character limit? For example, each character filling an individual cell or having a display appear with a count-down for the number of characters remaining in the limit, or something similar.
I have a column that is made up of postcodes, lat, long, eastern, northern data eg: SK10 5BA, 53.291013, -2.096675, 393652, 377121
And I want to end up with a column containing the lat (53.291013) and another containing the long (-2.096675).
I have worked out to use formula's to remove a certain number of characters from the left and right of the cell, but the challenge here is the postcode at the begining of the data, can be varying in length.
know of a formula that will let me copy a certain number of characters within the cell, but counted from the right, as the eastern and northern numbers are always the same length.
I have a cell (A1) with a number in it. The number has 30 digits. I need a formula for (B1) that will enter the same number as A1 but restrict the number to 28 digits. Basically I need it to cut off the last 2 digits.
View 3 Replies View RelatedI need to do a macro to do this:
Count the numbers of the characters in a cell.
The number of characters must be appear in another cell.
This number must be refresh when you type the key, not when you push enter.
This may not be the best way to do this, but I don't know Macros or Pivot Tables.
I am looking for a way with formulas to do the following:
Within a workbook the 1st sheet is the data entry.
In another sheet that will total data from the data sheet is where I want to be able to total columns of data, depending on what is entered in one specific column:
Example:
Data Sheet, E2:E2999 is a unit number selcted by pull down tab entry.
G2:G2999 in the same sheet is where the data is.
Q: What formula would allow to total the data on the Total Sheet depending on what unit number is selected in column E on the Data Sheet and the data amount in column D from Data Sheet?
I'm sure this can be done but I don't think I have the formula correct. What I am trying to do is add each day's total while displaying a positive number if the total exceeds 6000.
View 5 Replies View RelatedI have a description for a couple trucks in my inventory, rather than retyping all the mileage, I would like to select the miles out of the description.
Example:
14.0 Detroit 515 HP, 10 Spd OD, Engine Brake, Air Ride Suspension, 3.42 Ratio, 234" WB, 70" Double Deck Condo, 22.5LP Tires, Aluminum/Steel Wheels, Tandem Axle, 12,000# FA, 40,000# RA, 259,000 Miles
I have tried the find, left and mid formulas but haven't put something together to work just right. I would like to select the 7 characters to the left of "Miles".
Does anyone have any ideas?
i have a problem counting the number of characters in each cell in column "A" in a sheet and checking if number of characters in a cell exceeds 5 characters.
View 10 Replies View Relatedi have a problem counting the number of characters in each cell in column "A" in a sheet and checking if number of characters in a cell exceeds 5 characters.
View 8 Replies View Relatedtrying to limit the number of characters entered in a cell.
I clicked on Custom then =LEN(A10)=6 which works when i enter more or less than 6 characters, however it lets you paste in something which has more than 6 charters.
way to remove a varible number of characters in a cell? My example is in cell range A1:Z1 and each cell could have a different number of characters.
Smith, Sally 5348
Jones, Johnathan 7893
Doe, Mike 2223
What I would like to do is remove the second space and the numbers that follow to get a result of
Smith, Sally
Jones, Johnathan
Doe, Mike
I wish to limit the number of text characters in a cell and have excel prevent the entry of additional characters after limit is reached. I have tried the Data Validation but it does not preven the entry of additional characters. I want to be able to show the error immediately when the limit is reached and no additional characters are permitted.
View 3 Replies View Relatednumber for item detail level from category standpoint. For example, in the category sheet has total number per category and per month and in the item detail sheet has a list of item number with category. I want a formula to recognize which item belongs to which category then use the total number of category by month to multiply with % of total in column D from Item Detail Spreadsheet.
View 2 Replies View RelatedI am creating a spreadsheet for inventory use. I want to have a running total in (1) cell based upon a new/different number being entered into a different cell.
Column B, Row 1 (This will be a new/different number entered every day - inventory in or out, so positive or negative number)
Column D, Row 1 (This will be a running total based on numbers inserted in previous 2 columns)
Basically what I have is a key inventory. So there is column A with key number, B should be keys IN, C should be keys OUT, or ideally B would be IN and OUT meaning, for inventory IN input a positive number and for inventory OUT input a negative number, and D Should be total.
Column E represents number of keys currently in the inventory. I was going to hide the current inventory column so all you see is IN/OUT and total.
So what I need is to be able to just come in and type in a number in the IN and/or OUT column, without having to add/subtract it with the number already in that column.
Bottom line, I'd like to be able to use IN and/or OUT columns to just type in numbers as they come and not have to worry about what's already in those columns and get correct total number.
Ok here it is. Attached worksheet shows
Column A - Key Numbers...No data value
Column B - Inventory IN
Column C - Inventory OUT
Column D - Total
Column E - Current Inventory(Starting point)
So the formula I used to get what i currently have is (=B2-C2+E2). This way whatever i input in columns C and C. totals out in D. But this way every time I want to add/subtract a number in B and C, i have to add to the number already in the column. I'd like to be able to type in a number in B and C as i go and still have a correct total. I wouldn't mind having just one column for in/out and use positive and negative numbers to differentiate inventory in or out.
Key Inventory - Test.xlsx
Does 2003 restrict how may characters that you can put in a wrapped cell? Is there anyway to expand?
View 3 Replies View RelatedWhen you want to use Data Validation to limit the entry of the number of characters to a cell does this apply only to the cell that you are entering the characters or can it also apply to a cell that contains a LEN(A1) formula, for instance? Also,does the Data Validation limitation function includes spaces as well? Will the message appear while you are entering the characters (when it has reached the limit) or will it wait until you have hit Enter?
View 1 Replies View RelatedWe have a form that requires descriptive comments to be entered into several rows of merged cells. My goal is to have the form be able to automatically dropped down to the next row of merged cells when the current row of merged cells reaches a maximum number of characters.
And finally, the last row of merged cells would not allow any more characters than the maximum assigned but not advance to another cell automatically.
The rows I am working with specifically are:
Merged Cells F23:R23; A24:R24; A25:R25; A26:R26;...A29:R29
I have a base of workers which log each day their activities in hours (D01-D11). I would like a macro to sum total hours of each project (project numbers are from 320-516) and put it into the table on the left.
For example: For PERSON 1, I want that the cell I60 writes 10, and cell I74 = 6. For worker 2 (PERSON 2) would be AK60 = 3,5; AK67 = 8 and AK74 = 8.
In total where would have been 10 workers.
I have a base of workers which log each day their activities in hours (D01-D11). I would like a macro to sum total hours of each project (project numbers are from 320-1500) and put it into the table on the left.
For example: For PERSON 1, I want that the cell I60 writes 10, and cell I74 = 6. For worker 2 (PERSON 2) would be AK60 = 3,5; AK67 = 8 and AK74 = 8.
In total where would have been 10 workers.
I need to find the total number of rows down to the next blank cell (and then perform a function based on that number).
I'm using:
CountA(A1,xlDown)
Situation: I have a raw data import - each record is anywhere from 2 to 9 rows, and I need to move each row in that group into a column.
I would like to use something like:
totalRows = Application.WorksheetFunctions.CountA(Range("A1, xlDown"))
If totalRows = 4 Then
ActiveCell.Offset(1, 0).Range("A1").Select
Selection.Cut
ActiveCell.Offset(-1, 1).Range("A1").Select
ActiveSheet.Paste
etc.
Is there a way that I can add up the ?
When I try to use IF formulas it is asking for text but I don't want it to look at text and just the color.
I have an userform say frmNew. In the form, I have three textboxes: txtCost, txtRate, txtSale.
The following two boxes are filled by a user:
txtCost contain the Cost of an item (numbers)
txtRate contain the % Rate (3 character), i.e. the txtRate can contain only A,B,C,D,E,F,G,H,I and J. The corresponding value is 1,2,....9,0 respsctively.
The value for txtSale is generated on clicking the command button i.e. txtSale = (txtCost + (txtCost * txtRate)).
Could you please help in writing a macro for calculating txtSale value.
