Checking Number Of Characters In Cell Macro?
Mar 6, 2009i have a problem counting the number of characters in each cell in column "A" in a sheet and checking if number of characters in a cell exceeds 5 characters.
View 10 Repliesi have a problem counting the number of characters in each cell in column "A" in a sheet and checking if number of characters in a cell exceeds 5 characters.
View 10 Repliesi have a problem counting the number of characters in each cell in column "A" in a sheet and checking if number of characters in a cell exceeds 5 characters.
View 8 Replies View RelatedI want to run some macros based on the value of an input cell, but only if the input is a number (ie. it is not a letter or other character).
View 6 Replies View RelatedI have a report that includes data broken up by several headings. Instead of showing the heading and the data below it, I would prefer that the heading was included in every subsequent row that it related to (and the heading be removed).
All the headings are in italic non bold format.
All the data is in standard format (no bold / italics / underline).
The only data in the sheet is as above, and there are no gaps in the data. A heading will relate to all the data directly below it until there is a new heading.
I am writing a macro that will allow me to copy all the data in a set range (A2 and below) after checking that B1 contains the text "Year_id".
Right now, I am able to copy all the information, and paste it onto "Sheet 4". I am unable to code for the part where the macro would check for the text. The code that I have (for copying-pasting the date) is below.
Any code that would check the information in B1 into this macro code below:
Code:
Sub Copy_Allinfo()
Dim Sht As Worksheet
Dim Rng As Range
For Each Sht In Sheets
If Sht.Name = "Sheet4" Then
[Code] ........
I need a VBA code to find the number of characters in each cell and display the result in next column.
For Ex:
ColA:
HI
who
There
output should be
ColA,ColB
HI,2
who,3
there,5
I have shown example for 3 rows only but there are chances like it contains more than 3 rows(Dynamic rows).I tried by creating Range variable but I couldn't succeeded.
in ROW 1 I have columns A thru AD populated with a number in each cell. what I need to do is take that number and fill the below cell with the number times a set character. for instance, A1 has "4" in it, so I want A2 to look like "----"
View 3 Replies View RelatedI am looking too limit a cell too only contain 5 or 7 characters.
I can limit too one length, i.e. just 7, using the data validation function.
I'm creating a spreadsheet (Excel 2003) in which a user enters data in several cells, each of which will permit different numbers of characters (to include spaces). For example, in the first cell, the user will be limited to 50 characters, in the second cell, the limit is 30 characters, and so on.
I found the data validation error alert feature, but want to give the user a cue that the entry is too long so they know to stop typing before moving to the next cell. If they only are alerted when they finish making the entry, they might not take the time to properly reconstruct the entry to meet the size limitation. I'm trying to make this more user-friendly.
Is there a way to set up the worksheet so the user knows that the entry is approaching the character limit? For example, each character filling an individual cell or having a display appear with a count-down for the number of characters remaining in the limit, or something similar.
I have a column that is made up of postcodes, lat, long, eastern, northern data eg: SK10 5BA, 53.291013, -2.096675, 393652, 377121
And I want to end up with a column containing the lat (53.291013) and another containing the long (-2.096675).
I have worked out to use formula's to remove a certain number of characters from the left and right of the cell, but the challenge here is the postcode at the begining of the data, can be varying in length.
know of a formula that will let me copy a certain number of characters within the cell, but counted from the right, as the eastern and northern numbers are always the same length.
I have a cell (A1) with a number in it. The number has 30 digits. I need a formula for (B1) that will enter the same number as A1 but restrict the number to 28 digits. Basically I need it to cut off the last 2 digits.
View 3 Replies View RelatedI need to do a macro to do this:
Count the numbers of the characters in a cell.
The number of characters must be appear in another cell.
This number must be refresh when you type the key, not when you push enter.
I have a description for a couple trucks in my inventory, rather than retyping all the mileage, I would like to select the miles out of the description.
Example:
14.0 Detroit 515 HP, 10 Spd OD, Engine Brake, Air Ride Suspension, 3.42 Ratio, 234" WB, 70" Double Deck Condo, 22.5LP Tires, Aluminum/Steel Wheels, Tandem Axle, 12,000# FA, 40,000# RA, 259,000 Miles
I have tried the find, left and mid formulas but haven't put something together to work just right. I would like to select the 7 characters to the left of "Miles".
Does anyone have any ideas?
trying to limit the number of characters entered in a cell.
I clicked on Custom then =LEN(A10)=6 which works when i enter more or less than 6 characters, however it lets you paste in something which has more than 6 charters.
way to remove a varible number of characters in a cell? My example is in cell range A1:Z1 and each cell could have a different number of characters.
Smith, Sally 5348
Jones, Johnathan 7893
Doe, Mike 2223
What I would like to do is remove the second space and the numbers that follow to get a result of
Smith, Sally
Jones, Johnathan
Doe, Mike
I want to calculate the total number of characters in a cell or group of cells. Also, as a second step, I want to indicate which cells have a total number of characters greater than a certain value.
View 9 Replies View RelatedI wish to limit the number of text characters in a cell and have excel prevent the entry of additional characters after limit is reached. I have tried the Data Validation but it does not preven the entry of additional characters. I want to be able to show the error immediately when the limit is reached and no additional characters are permitted.
View 3 Replies View RelatedDoes 2003 restrict how may characters that you can put in a wrapped cell? Is there anyway to expand?
View 3 Replies View RelatedWhen you want to use Data Validation to limit the entry of the number of characters to a cell does this apply only to the cell that you are entering the characters or can it also apply to a cell that contains a LEN(A1) formula, for instance? Also,does the Data Validation limitation function includes spaces as well? Will the message appear while you are entering the characters (when it has reached the limit) or will it wait until you have hit Enter?
View 1 Replies View RelatedWe have a form that requires descriptive comments to be entered into several rows of merged cells. My goal is to have the form be able to automatically dropped down to the next row of merged cells when the current row of merged cells reaches a maximum number of characters.
And finally, the last row of merged cells would not allow any more characters than the maximum assigned but not advance to another cell automatically.
The rows I am working with specifically are:
Merged Cells F23:R23; A24:R24; A25:R25; A26:R26;...A29:R29
I am currently using the following formula to remove the letter "R" from the end of cells
[=IF(ISNUMBER(--RIGHT(A3)),A3,LEFT(A3,LEN(A3)-1))].
However, I would like a macro to accomplish this goal, along with something else. I have a list of values as follows:
CHD152-2
CHD115-1
CHD40-3
RE224
HPC644R
DOC020R
HPC594R
What I need is a macro that will remove any instance of "R", "-1", "-2", "-3", "-4" from the end of a cell. neither of the 5 values listed in the last sentence are present, the the cell will be unchange. So, after running, the above values would look like this:
CHD152
CHD115
CHD40
RE224
HPC644
DOC020
HPC594
I am checking whether or not two different cells contain a number or the error #NA.
If one of the cells contains a number then the result will be that number.
If both cells contain #NA then the result should be “99”
Example:
Formula in Column C
The values are in columns A and B.
If the value in cell A is a number the result is A.
If the value in cell B is a number the result is B.
If the value in cell A and B equal #NA the result is 99
In an active cell I have this value : " Hello.xlsm"
I need a MACRO code that will take out the characters ".xlsm".
I am trying to focus on the active cell and not a range.
Is there a way to specify if there are 46 characters in a cell, to apply text wrap, indent the second line, and resize the row height to 25.5?
For example, I always will have text on merged cells B7:C7. I'd like to have a macro that determines if the text goes over C7 (I figured that it would take 46 characters to do this), that the merged cells will be text wrapped, then row 7 will be resized to 25.5.
I know how to record a macro that will text wrap and resize the row height but am not sure how to do the "if" condition.
I have a macro to sort a very large list of materials by a variety of conditions.
The macro runs automatically when a cell on the master list spread sheet is selected and using If/ElseIf it sorts based on what cell they have selected.
Example
If ActiveCell = "ALUMINIZED" Then
ActiveSheet.Range("$A$14:$K$1945").AutoFilter Field:=2
ActiveSheet.Range("$A$14:$K$1945").AutoFilter Field:=4
ActiveSheet.Range("$A$14:$K$1945").AutoFilter Field:=1, Criteria1:= _"Aluminized"
Which is working perfectly. The problem I am having is that some of the cells are two lines so it looks like this:
BE
BEARINGS
I don't know how to get it to launch based on that cell content because of the line break in there. Can I make it launch based on the first two characters only?
I pull an excel sheet from a database each day that gives me sales data for different products sold. The way the spreadsheet comes from the system, the first tab is named "Document Map" and lists all of the products, and each product then has its own tab but they're generically named (Sheet1, Sheet2, etc.). The name of the product is always in cell T8, but the name itself is only the last 8 characters of that cell.
What I'm hoping to accomplish with a macro is two things:
1) Retrieve the last 8 characters from T8 in each tab, and name the tab with those characters (same effect as the formula "=right(T8,8)").
2) Ensure that this only occurs on tabs with the word "Sheet" in the beginning. Depending on the day, there could be any number of products and they each get their own tab, so I was hoping to be able to get the macro to only work on sheets where the first 5 characters are "Sheet" regardless of the number after that.
I have checked the following reference whithin Excel VBA's references Manually:
Microsoft Visual Basic for Applications Extensibility 5.3
BUT when I run the following Macro, once checked the prior reference:
Sub AddModuleToProject()
On Error Resume Next
Debug.Print Err ' I GET 0
Dim VBProj As VBIDE.VBProject: Set VBProj = ActiveWorkbook.VBProject
Debug.Print Err ' I GET 1004
Dim VBComp As VBIDE.VBComponent: Set VBComp = VBProj.VBComponents.Add(vbext_ct_StdModule)
Debug.Print Err ' I GET 91
VBComp.Name = "NewModule"
Debug.Print Err ' I GET 91
End Sub
I have a huge list of entries everyday (around 50,000) that needs a time stamp. Each of them has a time difference of 5 seconds in between. That is between two entries there is a time difference of 5 seconds. I use now() function to put the time stamp. The only problem is that I cannot have any value after 4:29:59 PM. That is, I need a macro that would check for the values in the C column, and if they are after 4:29:59 PM, put the value 4:29:59 PM, instead of the real time.
In cell C1:
IF((TIME(HOUR(NOW()),MINUTE(NOW()),SECOND(NOW()))) >(TIME(16,29,59)),(TIME(16,29,59)),(TIME(HOUR(NOW( )),MINUTE(NOW()),SECOND(NOW())+5)))
In cells C2:C9999999:
IF((TIME(HOUR(NOW()),MINUTE(NOW()),SECOND(NOW()))) >(TIME(16,29,59)),(TIME(16,29,59)),(TIME(HOUR(C1), MINUTE(C1),SECOND(C1)+5)))
However, the problem is I have so many entries that after a 10000 or so the time passes 4:30 PM. I think the only way to fix this would be to add a macro.
I am creating an excel application and have come a bit stuck. I would like to able create a macro button for printing a blank version of the workbook...when I say blank I mean the cells that the end user is able to type into.
I think I am able to do this providing all the cells are on the same sheet as the button using this ...
I'm trying to control the number of ways people can mess-up this worksheet. I have several buttons that copy one object from a worksheet "FISH PARTS" and paste them onto another "THE JUMPER FISHBONE"
My question is can I prevent people from copying objects from the first worksheet if they already exist on the second? Specific to the code below: how do I make sure "BONE_1" doesn't already exist on the worksheet "THE JUMPER FISHBONE" before allowing it to be copied from the other worksheet. And can I generate a message box that tells the user the object already exists on the page.