I'm calculating the difference in time:
9:54-9:45 = 0:09
Now to convert this in minutes (in number format), I multiply this number with 1440:
0:09*1440 = 9
When I click the cell this number is actually 9.0000005, rather than exact 9. I need it to be exact 9 since I have to match this number from other excel sheet.
To sum up:
This is what I expect:
31.99999 should be changed to 32
10.000001 should be changed to 10.
I've got a spreadsheet of samples taken at certain time intervals for a period of 2.5 hours, they were collected in hh:mm:ss format. Most of them are approximately 5 minutes apart. What I'd like to do is convert the first time to 00:00:00 and then recalculate each sample from there. Is there an easy way to do this?
So, what looks like this right now:
8:45:00
8:45:36
8:50:36
8:55:36
9:00:36
Would look like this:
00:00:00
00:00:36
00:05:36
00:10:36
00:15:36
etc...
I'm trying to calculate the available man hours I have for my shift/team. I have got the basic formula to deduct the time, and lost time for breaks ok, but when the shift end time crosses midnight the formula returns a "value" error message. i.e. start time = 18:00. End time = 24:00 breaks = 15 mins gives me a formula like this =TEXT(O17-N17-P17,"h:mm") and a result of 5:45
How I can make this formula work so it can calculate the variance even though the shift ends at 02:00am the following morning?
I manage a team in a call centre and deal with lots of reports on excel.
I am dealing with a report on a daily basis that i need to use in order to calculate the total idle time that each of agents have. There are roughly 170 agents.
After I have formatted the cells to hh:mm:ss, the obvious thing to do would be : =(B1-A1)
Is there a way to write a macro (or anything) in order to reapply this to the report on a daily basis? Bearing in mind that this has to be done daily for 170 individual reports. They work a 8am - 5pm shift. So there is an entry every time they make a call.
Agent Name
Extension
Initiateddate
TerminatedDate
MSGR_nmasango
9363
28/02/2013 8:06:47 AM
28/02/2013 8:08:54 AM
[Code] ........
I am conducting some analysis on alarm data of certain devices and am looking for creating a VBA algorithm that will do the following (refer to the table below for example data)
I want identify an asset in alarm (Column F) and based on its asset ID (Column C) and Fault Description (Column D) then find the row when the asset with the same asset ID and fault description returns to an 'ok' Asset State. After the row where the same asset ID and Fault description is found where the asset state returns to 'ok', I want to calculate the total alarm time based on the difference between when the asset ID and Fault description goes from 'Alarm' State to 'OK' state from DateandTime Column.
I want the result to be populated in a new worksheet that displays data with the following column headings as a result of the above calculations: Date, Asset ID, Asset Description, Fault Description, Alarm Time
I have added an additional column to show the type of output I am after.
There are up to 20,000 rows of data I want to perform the above calculation on.
A
B
C
D
[Code]....
I am using the following formula in Column E to calculate the difference between an employees start time, and their previous shift end time in order to work out how many hours rest they have had:
=IF(A4=0,"",IF(I4=0,"",MOD(I4-B4,1)))
My Current Formula works fine for same day calculations, but if an employee finishes work at 18:00 on Friday and starts work at 22:00 Saturday night, Excel calculates the Total Rest hours as 04:00, when in fact they have had 28:00 hours rest...
Is there a way of calculating the hours difference between two dates?
I have attached a sample of my spreadsheet to illustrate
Instead of calculating a time difference manually I want to have a formula do it for me. What I want to achieve goes as followed:
08/06/2006 04:33
12/06/2006 01:05
Time difference is 92:32 [hh:mm]
another example:
09/06/2006 12:42
12/06/2006 11:35
Time difference is 70:53 [hh:mm]
So instead of getting 92:32 and 70:53 by calculating it myself I would like to have a formula do it for me. Otherwise I'll have to invest a lot of time to get the information I need.
I created a Pivot Table whose columns are different years (2007, 2008). I would like to show the growth (or not) of the percentages from the years. For example
Dept. 2007 2008 Growth
Bio 97% 56% -41%
Is there a formula to calculate the difference between two letters?
For example, I have levels A-Z. Column A contains level at the start of the year (A-Z). Column B contains level at the end of the year (A-Z). I would like to find the difference (e.g. level A to level D would be a change of 3).
I am trying to calculate the difference between a scheduled start time and an actual start time. If the actual start time is greater than the scheduled start time a negative time (hh:mm:ss) should be returned. instead the cell is populated with #############....
I have tried to reformat using the custom formats, but the only options in excel 97 are for either standard numerics or £ (these return a minus figure).
I've had a look at the time functions but could not see a suitable one.
I'm sure there is a simple format solution to this.
Formula "(Cell-Cell)/ABS(Cell)"
When calculating percentage difference do I always subtract the smaller number/cell from the larger number/cell, then divide by the smaller number/cell or vice versa? Maybe I am over thinking it, but it is confusing the heck out of me
I provided an example below to illustrate a spreadsheet I work on. The numbers go up and down. I want to know how I should go about setting up the formula. If I need to ensure the smaller number is always subtracted from the bigger number, it will require a lot of manual intervention on my part.
Row 3 is =(b2-b1)/ABS(b1)Row 4 is =(b2-b1)/ABS(b2)Row 5 is custom. I went through each cell and made sure the smaller number was being subtracted from the larger number, then divided by the smaller number
PercDiffExample.xlsx
I have the following on a spreadsheet that keeps track of when student work is handed in and calculates how many days late it is so a penalty mark can be given.
A1= User entered value : a fixed submission date that a piece of work is due to be handed in on.
A2 = User entered value : The date entered if work is handed in on time or early
A3 = User entered value : The date the work was handed in if late
A4 = User entered value : The date the piece of work is due to be handed in if an extension has been granted
A5 = Calculated value : How many days late a piece of work is
Essentially I want the calculation in A5 to reflect how many days late a piece of work is. SUM(A3-A1) would do this of course. If the work is early or on time, A2 is ignored.
Sometimes however students have permission to hand work in late, in which case another calculation is needed to work out how many (if any) days over their extension date (A4) their work is. How do I combine these two calculations into the same cell, so that if A3 is empty it checks A4 to see if the student has an extension date and then returns a 'days late' value if applicable?
I need to calculate the difference between a start time and end time in hours and minutes.
Start
01/07/2008 11:40
End
01/08/2008 19:28
Start and End columns are formatted as 'Custom' m/d/yyyy h:mm.
I'm not sure what formula to write to calculate the hours and minutes between the two times. Everything I've tried doesn't count over 24 hours. Also what do I format the result cell as?
It will be easier to explain in an example:
A B
Time (hh:mm:ss) Digital
1 10:03:00 0
2 10:03:01 0
3 10:03:02 1
4 10:03:03 1
5 10:03:04 1
6 10:03:05 0
[code]....
From the data above I am searching for the duration of when the digital column says '1', i.e my function = A5-A3 which would output 2 secs or 00:00:03 & likewise A9-A8.
The problem I have is that the digital signal is staggered and does not always have the same frequency. I have over 6848 lines of time to check so to do this manually would take me all day.
Formula to calculate time allotted minus time used and show the difference in hour and minute.
View 1 Replies View RelatedCell A1 contains 02/29/2012
Cell B1 contains 12/01/2006
I am looking for a formula that will return the number of months (periods) between two dates, ignoring days and years. Using the above dates, which cannot be changed, the result needs to be 63. The formulas I have tried keep returning 64 because my later date is at the end of a period, and my earlier date is at the beginning.
This may be a bit vague but here goes.
I have to calculate the difference between the start time and end time of a job. The only catch is, how can I avoid calculating "out of hours" time. So, if a job goes from 9am to 9am the next day, I want it to avoid calculating between the hours of 23:30 and 03:30.
Another example is if a job goes from 02:00 to 04:00, I want it to avoid the tim between 02:00 and 03:00.
If there is a difference in days, so the job goes overnight, how do I take that into consideration also.
I've got a time difference from 8:00AM - 12:30PM as 4.30 I'm trying to get the minutes, .30, converted into a 6 minute increment, .5. Is it possible to do this and if so how would it be done? Below is a chart of how the time is converted from 6 minutes increments into decimal form.
6 = 0.1 36 = 0.6
12 = 0.2 42 = 0.7
18 = 0.3 48 = 0.8
24 = 0.4 54 = 0.9
30 = 0.5 60 = 1.0
i want to ask for a reason if a item is late where M & line is the time it should have left and N & line is the actual time it left.
TL is the difrence between the two times
i want the input box to read " DRIVER DISPATCHED 30 MINUTES LATE PLEASE ENTER REASON"
but it returns "DRIVER DISPATCHED -.11233543 E2 MINUTES LATE"
how do i format this to show the difrence in minutes
TL = Range("N" & Line) - Range("M" & Line)
late = InputBox("DRIVER DISPATCHED " & TL & " MINUTES LATE PLEASE ENTER REASON")
I am having a little trouble with a spreadsheet I am creating, the formulas and cell formatting I should be using to enable this to work.
Here goes:
in cell E3 I have a time started (e.g 12:45 pm), In F3 i have time finished (e.g 2:30 pm)
So, what i'm wanting is the time taken in G3 and also, i have the amount of units that is entered manually in H3. I would like I3 to show the time taken per unit.
I'm battling to come up with the formula to calculate time and a half and double time. My boss wants me to show the overtime worked AFTER 40 hours has been worked. I have attached a copy of my spreadsheet.
View 4 Replies View RelatedI know the title is a bit vague, but I cant think how else to word it!
I have a sheet (attached) which works out hours worked, and if the amount is under a specified target, it counts how much time is owed. The problem occurs when someone works more hours than the specified target.
I guess I need an IF formula of some kind, to say if the figure is over the target, to put zero in the hours owed column.
I'm trying to calcuate the time difference using military time.
For example:
A1 has 0400 A2 has 0430 A3 SHOULD be :30
B1 has 1500 B2 has 1715 B3 SHOULD be 2:15
Unfortunately I either keep getting all zero's, or the correct answer but without the ":" in the answer (b3 would look like 215)
Formula query
Column “A” list of dates correspondence in
Column “B” list of dates correspondence reply out
Need to calculate how many times the difference between date in and reply date is <= 5 in a specific time period.
The start date is entered in say, “K1”
The end date is entered in say, “L1”
Also calculate difference in dates between 14 days and 21 days for time period
Also with reply in column “B” not sent until over 28 days. I have tried SUMPRODUCT with (date_in=K1)*(date_out<=L1) for the dates but unsure how to define <=5
I work at a call center and I get the data as Date, Time of calling and Duration of the call. Now since this is an overseas call center, even though the calls spills over 12midnight, the corresponding date shows as the date when the agent logged in.
So I get the data in this format, Date: 06/11/2012, Time: 19:00:00 - 04:00:00.
How do I calculate the time difference at one go without first getting the time difference from the time of login till midnight and then add that to the time difference of midnight till time of logout. I have attached a file for your review.
does anybody knows an idea how to get the time difference without getting the #NUM! error message?
Column A contains Start Time while Column B contains end time, if the time in column A is 11:45 PM and the time in column b is 12:15 AM, then I would get this error message...any idea how can i get the time difference without having to use the [hh]:mm format? i would like to use the hh:mm AM/PM format instead.
Given any two timestamps with the format
dd-mmm-yyyy hh:mm:ss AM/PM
How to calculate the total time difference in seconds.
For e.g. calculate the time difference in seconds for following
07-Nov-2009 00:00:01 AM
06-Nov-2009 11:59:59 PM
Answer should be 2.
I have a userform with a number of textboxes where the time is entered in the format like 00:00, (24 hour clock).
What I need is code to calculate the time in minutes / hours between 2 of these textboxes and for the result to be displayed automatically in the third textbox with no user input required, (other than to put in the start and end times).
The third textbox must display the result in the same format as above - here is the code I use to get the textbox to force the time in as above;
Code:
Private Sub TextBox3_Change()
Dim t As Date
'If they enter 4 digits and NO colon e.g. 1400
If Len(TextBox3.Value) = 4 Then
[Code] ......
A
B
C
1
Time 1
Time 2
Result
2
8:00
7:30
-0:30
Date OutTime OutDate InTime InTime Difference
01-03-099:0001-03-09NIL
02-03-09NIL02-03-09NIL
03-03-09NIL03-03-0910:002 day(s) 1 hours 00 mins
03-03-0911:1503-03-0918:000 day(s) 6 hours 45 mins
04-03-099:00NILNIL
05-03-09NILNILNIL
06-03-09NILNILNIL
07-03-09NIL07-03-0914:453 day(s) 5 hours 45 mi
In Column E in want the time difference to be calculated as shown above.