I am using GETPIVOTDATA function with an incomplete pivot table. The pivot table will eventually be complete but in the mean time i need the cells that are returning the #REF! error to actually display "0". Any way I can do this?
View 3 RepliesI have a number value in (e.g.) cell A1, and I want to display it in cell B1.
The number in A1 updates automatically from a website (and through a few regexp and other functions). Most of the time it displays a number, but sometimes it can be an error if for example the website connection doesn't work or something else is wrong.
I want to display the number of cell A1 in cell B1, but if the number in A1 is an error, I don't want to display an error, or a zero, or a dash, or anything of the sort you'd normally do, like =IFERROR(A1,"error"). I want to see the number there was in B1 before the error occurred. In other words I want to update the value of B1 only if there is a number to update with.
I have two sheets. sheet2 is a lookup table. sheet1 is information sheet. i have created a userform where a user inputs data into 3 textboxes and clicks a button. i have the code for transferring the data from the textboxes into row after the last used row on sheet1, columns a,b,c. in columns d and e i have vlookup code that takes the value in column c and performs the lookup function to return values found in sheet2. this all works fine.
I am trying to display the vlookup results in a 4th textbox on my userform.
If I use this code:
[Code] ......
I receive a type mismatch error
if i use THIS code:
[Code] ..........
if works fine!?! what gives?
I'm trying to copy an ELOOKUP formula down a column in a sheet. The formula is losing part of the table array when I carry it down and returning an N/A error. Interestingly, it will work when I copy it across a row.
View 9 Replies View RelatedThis macro keeps returning and error. It does it on all pages, except one. It works perfect on one page. This is a snip of the macro. if more info is needed. Let me knowMacro error.PNG It is supposed to Auto fit will filling in cells.
View 10 Replies View RelatedI have the following code that opens a series of workbooks on a given day, However, if one of the workbooks has been renamed or is missing the code gives a "400" error and stops, is there a way of having the code retry the next workbook if it comes to an error?
View 2 Replies View RelatedI am getting a compile error, the "+" sign is highlighted and the error is named argument already specified, if I remove the "+ vbExclamation", I receive the same error.
What I want to do is if the appropriate sheet is not active, the response will force the sub to end sub, if the proper book is active workbook, then continue on.
Dim Ans As String
Set oWss = ActiveSheet
Set oWsSNBD = Workbooks("TGSProductsAttrib.xls").Worksheets
Ans = MsgBox("Make Sure the ""TGSItemRecordCreator Workbook"" is the Active Workbook", _
"Correct Workbook?", Buttons:=vbYesNo + vbExclamation)
If Ans = vbNo Then
MsgBox """Select the TGSItemRecordCreator Workbook"" & Re-Run Code."
End
End If
I have come up with the following array UDF to help me split a large list of values into list of smaller groups.
The function takes the 3rd input argument to to understand how many smaller lists it needs to split the bigger range.
The 2nd argument simply specifies a seperator, either "," or ";"
On using the same on a worksheet I'm getting a #VALUE! error and for the life of me am not able to pinpoint the problem area.
Public Function CBOList(Rng As Range, App As String, OutRng As Range) As Variant
Dim Func As WorksheetFunction, UniqueVals As New Collection
Dim cnt, who
Dim ctr As Long, lst As String
Dim myarr() As Variant
Set Func = Application.WorksheetFunction
CBOList = ""
Application.Volatile...........................
I have a function that works out which is the last column containing data on a worksheet, but for some reason it is alwys retuning 0.
View 14 Replies View RelatedI'm developing an excel addin using Visual Studio 2008. At the moment i'm trying to display a popup showing the value contained in cell A1. However, i'm getting a runtime error saying that xlWorkBook is null. I've been able to get this to work if i open a workbook but i want to be able to execute my code on the currently active workbook. I thought that ActiveWorkbook (also tried ThisWorkbook) would let me do this but i'm having no success.
using Excel = Microsoft.Office.Interop.Excel;
using Office = Microsoft.Office.Core;
...
...
Excel.Application xlApp;
Excel.Workbook xlWorkBook;
Excel.Worksheet xlWorkSheet;
xlApp = new Excel.ApplicationClass();
xlWorkBook = (Excel.Workbook) xlApp.ActiveWorkbook;
xlWorkSheet = (Excel.Worksheet) xlWorkBook.Worksheets.get_Item(1);
MessageBox.Show(xlWorkSheet.get_Range("A1", "A1").Value2.ToString());
I have a userform that finds any instance of the user inputted search and tells you which sheet its in and allows u link to them. I also have a number of text boxes that I want populated with the information found on only the activesheet, not both. Currently I get a type mismatch error, and whilst it populates the information in debug mode I also get a Error 2042 on the following
TextBox5.Text = Cells(rngFind.Row, 2)
Option Explicit
Sub locate(Name As String, Data As Range)
Dim rngFind As Range
Dim strFirstFind As String
Dim Find As String
With Data
Set rngFind = ActiveWorkbook.Sheets(1).Cells.Find(Name, LookIn:=xlValues, LookAt:=xlPart)
If Not rngFind Is Nothing Then
strFirstFind = rngFind.Address
Do
If rngFind.Row > 1 Then
ListBox1.AddItem rngFind.Value.....................
I am trying to read Formula1 from the the Validation object. If the cell does not contain a Formula1 - I get on object error.
In:
http://www.ozgrid.com/forum/showthread.php?p=95521
Derk suggested "That error occurs when the activecell has no validation. Some of the properties return as "codes" so you will need to figure out what say -1 means for alertstyle." I do not know how to test for this.
My problem is that I am getting the N/A error in cell M3 if L3 is empty. I would like the forumla to 'ignore' cell L3 if it is empty. I do not want a zero put in there. I have looked up information on ISBLANK function but the more I read the more confused I am getting
View 6 Replies View RelatedA client has a registration workbook for each student which contains 3 types of worksheets, A) Transcript B) Registration and C) Grade sheets. Each file has only 1 Transcript sheet and 1 to many pairs of Registration and Grade sheets.
I have a GPA user defined function which obviously can only be used on a Grade sheet. I would like to return an Error if the user trys to use the udf on a non Grade sheet.
Currently I am just returning 1/0 but the smart tag returns #Name. Can I control the text displayed somehow?
Hide Cell Error Display #DIV/0! - "LOW",
View 9 Replies View RelatedWhat is causing this to error. Basically I'm just trying to highlight cells, and create a pivot table out of that. Here's my Code:
Sub Macro1()
'
' Macro1 Macro
Dim myRange As String
myRange = "Sheet1" & Selection.Address
Sheets.Add
[Code] ..........
When I debug, the value of myRange is something like Sheet1$A$19:$K$37 with the actual cell values being whatever I highlighted. I get a Runtime Error 5 Invalid procedure call or argument. I'm assuming it's something with my sourcedata variable, but I'm not sure what.
Also, I did try commenting out the Sheet.Add and Sheets("Sheet2").Select Cells(3, 1).Select lines, but it still produced the same results.
For some reason get a type mismatch error on when I try to determine the rth member of summation range. I have highlighted the relevant part of the code in bold. It is strange as I can obtain the address.
If ((All_nurse_names(r, 1) = nurse_name) And (All_status(r, 1) = status)) Then
Debug.Print "test " & r & " " & summation_range(r).Address & " " & val(summation_range(r))
total_hours_in_shift = total_hours_in_shift + (summation_range(r))
End If
I am, and have been using several sum- and count-ifs formulas for a time, but when the new year rolled around, decided to improve some of the sheet.
That all being said, the issue started after this. A specific set of my count and sum if functions started returning error values.
I analysed them, they seemed fine, and then selected them and hit enter. Problem over in that cell, as suddenly the correct value is returned.
But that's just it, I know the formulas are correct and working, as, if I select and hit enter on them individually, they return the right value. However, every time I close the sheet and re-open, all the values are showing error again.
I am perplexed. Did I inadvertently change a setting somewhere when I rebuilt the worksheet that is preventing the formulas from resolving correctly? As, like I said before, the formulas are fine, the data they are resolving, is fine. Just does not seem to calculate when I open the sheet.
Example:....
i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.
A 1
B 0
C 0
D 0
But I can't determine how to get this done.
I need a program for my user form such that it displays an error message.
I have created an user form with employee name ,task and remarks.
I need a program in such a way if an user clicks the "submit" button without entering all the fields in the user form, an "error message" should be displayed.
The submit button has to work only if all the fields are filled by the user.
When the whole row in excelsheet is full for particular date that means all the values of columns (Legal Charge,GA and DNM) have been entered for particular date then display an error message if the another user tries to enter the values for the same date .
It means the user can enter the values for same date only if values of Legal Charge,GA and DNM are empty,otherwise an error message should pop up.
I have a userform with a combobox (cmbSearch) , a textbox (textbox1) and a listbox (listbox1)....and a commandbutton (cmbFind). This userform is used for searching records in my worksheet....where user selects a "Search By" category from the combobox and then enters relevent text search criteria in the textbox....and all the search results are shown in the listbox. This part works fine untill someone tries to search a "non-existent" record. e.g. a customer name thats not in the database and it gives an error. I would incorporate in my code to have a Message box pop up on these type of searches saying "textbox1.value Not Found!" insetad of error message.
Private Sub cmbFind_Click()
Set c = Range("a65536").End(xlUp).Offset(1, 0)
'write userform entries to database
Dim DataSH As Worksheet
Set DataSH = Sheets("ComplaintData")
With DataSH
.Range("L1").Value = cmbSearch.Value
.Range("L2").Value = TextBox1.Text
.Range("N1"). CurrentRegion.Clear
.Range("A1").CurrentRegion. AdvancedFilter Action:=xlFilterCopy, criteriarange:=.Range("L1:L2"), copytorange:=.Range("N1")
End With
lstSearch.RowSource = vbNullString
lstSearch.RowSource = "outdata"
End Sub
I am automatically generating a hyperlink to another document. The link that generates is: (I don't know if this qualifies as code, but I'll tag it anyhow...)
06-09-05 0000020 Name/06-09-05 0000020 Name.xls# 'Notes'A5
with 06-09-05 0000020 Name as a directory off the current App.path, and 06-09-05 0000020 Name.xls being the name of the file in the directory. It does have a sheet called "Notes". The thing of it is, the hyperlink takes me to the right place, it just gives me an error message every time saying "Reference not valid". How can it be taking me to the right place, and still giving me the error?
I am trying to use a match function in VBA to return a value when a number of values in a row match a certain criteria (I have tried the Find approach on the Ozgrid help pages but it is not what I am after). My problem using a match function of course is that when there is no match the code returns a type mismatch error. I have tried to circumvent the error problem using an "On error resume next" but this then delivers a match for all rows. Anyone have any thoughts about how I can get around this problem?
Sub DataSum()
Dim strData As String
Dim i As Integer
i = 0
Sheets("Sheet1").Activate
Range("B4", Range("B4").End(xlDown).Offset(0, 0)).Select
For Each cell In Selection
If cell.Value = 0 Then
i = i + 1
Else
strData = Sheets("Sheet1").Range("$B$4").Offset(i, 0)...........................
I want the users to store time only in some of the textboxes in a form so I have used control tip text for those textboxes. But i want to write vba code for displaying the error message if the users don't enter time in hh:mm:ss in those textboxes.
View 7 Replies View RelatedTotHCInv.Value = WorksheetFunction. Sum(KRInv, PBLInv, CRInv, PVInv)
If i >= 34 Then CPSCtphRMA.Value = WorksheetFunction.Average("G" & (i - 30) & ":G" & i)
The first line runs properly, but the second line bugs out with the error message "Unable to get the Average property of the WorksheetFunction class". I can simply do the math, but I thought that using the worksheet function would be easier than summing and dividing. I'm curious, though, as to why I can't seem to use the Average function.
i have this formula in cell e28 =IF(B28<>"",LOOKUP(B28,STOCK!A1:A500,STOCK!B1:B500),"") and when its empty it returns a blank cell
but in cell e29 i have exactly the same formula =IF(B29<>"",LOOKUP(B29,STOCK!A1:A500,STOCK!B1:B500),"") but i returns #n/a
why is this and how do i stop it i want the cell to be empty unless there is a code entered in b29 in which case it will look up the relevant info for me
Basically, I want to use look in one cell to get a value then in a table look in a coloum to find the same value then return a value from a different column in that row.
This is to organize groups of children participating in an event.
See the attached spreadsheet for details.
Groups example.xls
I am looking to return the larger value of 2 cells into a seperate cell.
View 2 Replies View RelatedI had this problem a few days ago and NVBC suggested Text to Columns, which worked initally but didn't seem to 'save' or stick... also, I'm not sure what is causing the problem to begin with. It was my understanding that Excel couldn't return a truely 'blank' value. If a cell was blank or empty, Excel still 'sees' it as Zero. WHY then, for the Love of Gummi Bears, will Excel not calculate my formula. It's a simple formula!
=A13+B13
I've tried
=SUM(A13+B13)
I've tried
=IF(ISERROR(A13+B13),"",A13+B13)
But if don't TYPE in a 0 or a number, then it just does nothing. 50 + 0 = should be 50 not blank or #VALUE!. 50 + Nothing = should be 50 not blank or #VALUE!
Attached is a small copy of what I'm trying to do. I've double checked that all number cells are formatted to numbers, not text. I tried the Data:Text to Columns trick. I've tried Tools:Options:Show Zeros. I've tried Manual and Automatic Calculation. They shouldn't have to type in 60 cells of Zero to get the simple calculation.