Check 4 Different Columns That Have Dimensions
Nov 16, 2009
I have a worksheet with many dimensions and I would like to have a formula or macro to do the following: I need to check 4 different columns that have dimensions and calculate the best combinations in order to fit within the least amount of 96 inch boards.
View 9 Replies
ADVERTISEMENT
Jul 20, 2009
I have a lot of carton dimensions that are always presented in the same manner and would like to be able to split the individual dimensions into seperate columns.
The format is always: Length Width Height. Presentation of data is always ???x???x??? or ??x??x??? (ie two or three chrs seperated by the letter X). If the full string is stored in column A I would like B to display Length, C the Width and D the Height. I find it easy to use LEFT for Length but struggling with Width and Height which I'm sure are easy, just can't get my head around it.
View 4 Replies
View Related
Sep 5, 2007
Is there a way in excel to say if i select Item1 and it is 100mm x 30mm x 100mm, excel will say this will fit into a compartment called A1 and may also fit into a compartment called B6.
I have a list of all the compartments and what the internal dimensions are. So is it just a matter of saying if these dimensions are within those of the compartment then that item will fit in.
I have a list of some what 6000 Items that have dimensions. I may pick 200 or so of these items to fit into special compartments of a machine. Because of the varying sizes i need to know what compartment each item will fit in so i can build a machine big enough and get the right size compartments.
View 11 Replies
View Related
Nov 25, 2008
My macro prduces some text ang a graph on the screen and I can print the result.
Ok so far. But when I run this macro in a different screen resolution, the layout of the page is disturbed: the graph is on the wrong place and the dimensions of the graph are different.
Of course I can drag and resize the graph and include this proces also in the macro but I think this is not the right way. My question is: are in VBA commands which can fix the graph to a location on the sheet/screen and adjust the graph to the requested heighth and width?
View 3 Replies
View Related
Jul 3, 2007
I am working with a dynamically declared array. Just wondering if anyone knows of a way to get the dimensions of the array so that I can work with them? e.g. to loop through the array.
View 5 Replies
View Related
Jun 20, 2014
I am trying to graph dimension measurements that are automatically added as a new worksheet upon completion of a CMM program. Do I need to move all of my data to one work sheet to be able to graph it or is it possible to call the same cell on multiple sheets? Also is there a way to set the graph up so that it updates the information every time a new sheet is added? I have a sample workbook attached that only list one dimension the actual workbook will have many dimensions listed. Sheet 1 is blank and sheets 2-4 contain the information from the CMM.
View 1 Replies
View Related
Apr 28, 2014
I iterate through a list and store the data in an array.
[Code] ..........
This works fine, but I tried to have 2 dimensions to the array and It no longer works!
View 4 Replies
View Related
Apr 12, 2013
I'm a bit uncertain if my named range has turned out the way i want it to.. Is their anyway of finding the dimensions of my namned range, i.e. # of rows and columns?
View 8 Replies
View Related
Aug 13, 2009
I am a woodworker. I have a CAD program that gives me a cut list of all the parts I need. I then take this list into Excel and do some stuff with the data.
all the dimensions are in fractional inches where ' is used to designate feet and " designates inches. I use the find and replace command to get rid of the ' and ". if the dimension is just a fraction like 3/4 Excel thinks this is a date and displays march 4th. I have tried formatting the cells to numbers before i do the find replace with no luck.
View 9 Replies
View Related
Feb 4, 2010
I am trying to automate the cleaning and compiling of some data, in fact its quite a lot of data, there will be about 200,000 lines over several spreadsheets.
Determine the width of the data on spreadsheet1
Determine the rows with empty cells at the bottom of spreadsheet1
"now that I know the dimensions of this rectangle"
Copy a rectangle (with the same dimensions as the one on sheet1) of data from sheet2
And paste this rectangle into sheet1...
"This is the point of the excercise, I cannot have any gaps in the data (this includes at the end of a spreadsheet) as it needs to be a continous flow from one shreadsheet to another"
This is what I have done so far... I understand if it is laughable, I've only been doing this a couple of days.
Sub HowMuchSpace()
' No. of columns
Dim bWidthOfColumns
Range(Worksheets("Sheet1").Range(":*", ":*").Cells.SpecialCells _(xlCellTypeConstants).Count).Value = bWidthOfColumns
'No. of rows
Dim lNumOfRows
Range("*:*").Value = lNumOfRows
End Sub
View 9 Replies
View Related
Jul 19, 2006
I am working now on macros changing the datas in a pivot table created from a OLAP cube. I have there some hierarchic dimensions in the format of Category.Group.Item etc. When creating a macro with recorder i get something like this...
ActiveSheet.PivotTables("cube").PivotFields("[Dim_Item]").CurrentPageName = _
"[Dim_Item].[All Dim_Item].[CategoryA].[GroupA4].[Item550321]"
Is somewhere out there any tutorial to that [All Dim_Item] thing? ... cause i feel there IS what i need, that with some cunning command i could show an item without knowing his group and category, but i cant get the macro working.
View 6 Replies
View Related
Oct 11, 2007
I am trying to create a spreadsheet containing a table of dimensions that are multiples of up to six loadable variables. I work for a stainless steel tank manufacturer. The body of tanks are formed from coil stock of varying widths. Typically these might be 1200mm, 1500mm, 2000mm and possibly 1800mm as well as the imperial equivalents. This could mean up to eight variables but in reality all are unlikely at any one given time.
We are told the volume that the tank is required to contain and a target preferred diameter. The theoretical height is therefore derived from this information. But now comes the tricky bit. It is desirable, to minimise cost of welding by minimising the number of strakes or wrappers. Can anyone give me a formula or whatever that can be used to do this and hopefully generate a table of close heights up to say 40 meters. Thus allowing an operator to select from say five presented options.
I have a table in a spreadsheet that the three principal widths of 1200mm 1500mm and 2000mm generate. It was created for me a while ago by a gentleman working at the Amsterdam Museum that I’m happy to send for perusal. The trouble is he never told me how he did it and no matter how hard I try, I cannot discover the method or formula. The first column gives the total combined height, the second the number of 1200mm wrappers, the third the number of 1500mm and the last the number of 2000mm. It is that simple
View 4 Replies
View Related
Dec 10, 2009
In my business I deal with a ton of different dimensions for my products. A lot of times the dimension will be within the cell as follows, "Product A 17x27 Brown", is in a single cell.
Is it even possible to write a code or formula that will find the "17x27" in the description, recognize it as a "dimension" and then run the formula that I need which is
View 18 Replies
View Related
May 12, 2014
I have a worksheet that contains a number of ActiveX image controls, which have been scaled to a uniform height to serve as thumbnails.
I have also created a class, where each instance is initialized with one of these image controls, and events (specifically the on click event) are captured. When the user clicks the picture, it opens a userform containg the same picture. However, I'd like that picture to be at its original size, not the scaled-down size.
how can I determine the original dimensions of a picture used in an image control? I can tell that the original resolution is there (by changing the PictureSizeMode to clip), but I can't find any properties that show me how big that image actually is, only ones that return or set the size of the object itself.
View 1 Replies
View Related
Dec 5, 2008
How can I check (using VBA) if 2 columns (F and G) are already grouped.
View 7 Replies
View Related
Nov 26, 2007
I would like to count al the rows where in certain columns there are certain values.
For example:
=SUMPRODUCT(--(Bakjes!$C$2:$C$4000="1");--(Bakjes!$G$2:$G$4000="")
This works fine. However, I would like to look in columns N2:W4000 as well if in that specific row value x is present. This gives:
=SUMPRODUCT(--(Bakjes!$C$2:$C$4000="1");--(Bakjes!$G$2:$G$4000="");--(Bakjes!$N$2:$W$4000="x"))
This gives a #value error. Is it not possible to look in multiple columns at one time with sumproduct?
View 9 Replies
View Related
Jun 14, 2009
I'm trying to check if data in column u is in column g if so highliglt the
Cell row in column G
Sub Macro1()
Sheets("Recipes").Select
Rows("2:5602").Select
With Selection.Interior
.Pattern = xlNone
.TintAndShade = 0
.PatternTintAndShade = 0
End With
rlc = LastCell(ActiveSheet).Address(False, False)
lr = ActiveCell.Row
lc = ActiveCell.Column.............
View 9 Replies
View Related
Nov 29, 2006
I want to check relations between 2 columns.
Example:
1 2
1 3
1 4
4 1
4 5
4 3
2 1
2 3
In case that I have relation 1->2, I what to check do I have relation 2->1.
Could you propose me a formula or script to make this check.
View 3 Replies
View Related
Aug 22, 2007
Is there a way that when looking at selected cells you can check their formatting?
I am trying to write some vba code to check for blank spaces in a number of columns (doing it one column at a time at the moment).
However, the current code im using messes up as at the bottom of the data there is a Total: column which is formatted in blue. Total: is only in the A column so the code I have won't work for other columns when no data is in them..
Range("A65536").Select
Selection.End(xlUp).Select
If Selection.Cells.Row > 6 Then ' there's some data in the sheet since we didn't hit the header row - now look for blank currency cells next to occupied lessee prospect cell
While Selection.Cells.Row > 6
If Selection.Value = "" Then ' there's a blank entry in the sheet - add error to 'passed' string
passed = "Blank spaces in ACC column " & Selection.Cells.Column & Selection.Cells.Row & " - please correct." & vbCrLf
End If
Selection.Cells.Offset(-1, 0).Select
Wend
End If
If there isnt any data at all up to the header row but blank rows between the header and the bottom total (blue) row it doesnt work.. how can i get around this? I thought perhaps checking that it isn't blank OR the total row somehow by checking the color (ie formatting)?
View 9 Replies
View Related
Aug 6, 2009
Is there a good way to check two columns at the same time and return the value in the 3rd?
Example
12 0.07 8
12 0.37 10
12 0.82 12
12 1.30 15
12 3.90 22
12 8.00 28
12 15.00 35
I look for 12 in the first column with vlookup but I need to also look for a figure in the 2nd column which is greater than my figure. So say I want 12 & 6.0 I would want the formula result to be 28 because the nearest larger number in the table column 2 is 8.00.
View 2 Replies
View Related
Jul 25, 2008
I am using Excel 2007 on Windows XP. I have written up a questionnaire that allows the user to simply check boxes in the cells. My problem is coming up with a formula to count the number of boxes have been checked. I tried several count formulas without any luck. I think one of the problems is that when I highlight the cells with these check boxes it doesn't actually show in data in the fx line.
View 9 Replies
View Related
Aug 29, 2007
If you open the attachment.. then you will see that Column A has all the names and Column B has it's Value.. likewise.. Column D has all the names and Column C has it's values...I'm trying to first match the names from Column A to Column D and then see if Column B matches to Column C..
View 8 Replies
View Related
Apr 12, 2014
As an part of QA activity
1. first I export data and directly paste in the "RAWDATA" Sheet.
2.There are 50 columns and each has header like Clientname,date,Id,campaign,websitename,frequecncy etc.
3.Exported data does not have same order
4.so when I paste data in excel I check manually if orders are in correct or not?which takes my long time to review/manually check
Using macro or something else to review the order and if any discrepancy then raise error? Need Excel to check order of columns ?
View 1 Replies
View Related
Apr 23, 2014
I have a userform that I use for data entry with lots of combo boxes, list boxes and text boxes
One thing i haven't cracked yet is to check for duplicates against two matching fields
If a user (for example) enters 'SAB' (which will be stored in column A) and then 'UK' (which will be stored in column B) and there is already an exact match for both, then I need to inform the user that a matching record already exists
The following is OK: (the dots below are meant to illustrate spaces between the columns!!)
Col(A).....Col(B)
SAB........UK
SAB........USA
SAB........Italy
BUT, if a user then tries to enter:
Col(A).....Col(B)
SAB........UK
I need my userform to register a duplicate entry.
My sub routine is detailed below : .....
View 3 Replies
View Related
Apr 6, 2013
what i am trying to do is look at an entire column, and see if that same date exists in the other Activity tab, if the dates match, then show the activity
here is the formula i am using, =IF($A9=Activity!$A2,Activity!$B2,"No Activity")
my problem is that i am only able to isolate one of the cells,, how do i check the entire column?
in other words, if i select two weeks, those two weeks of activity will show, if i select all weeks, all of the weeks activity will show, right now i can only get one of the weeks
my data looks like the following
1st tab
1/8/2013 - 1/14/2013
1/29/2013 - 2/4/2013
1/22/2013 - 1/28/2013
[Code].....
View 3 Replies
View Related
Nov 12, 2013
I have a named range BGl (G1:R1). I would like to see if a cell address ($U$6) is within the columns of that range. I need a function to give me a true or false based on changing cell addresses.
View 5 Replies
View Related
Mar 20, 2007
I have a column on sheet 1 which contains 200 lines with a unique number in each row (account codes). I have another sheet (sheet 2) which contains the same column. sometimes an extra row for an extra account code is added to the col in sheet 1. I need to make sure that the col I have in sheet 2 always has exactly the same as the col in sheet one, where the same account code should never be repeated. I am currently trying to setup a sheet where I keep all the checks and controls.
View 7 Replies
View Related
Jul 12, 2012
So I have two columns, in column a, i have a list of zip codes and in column b i have a larger list of zip codes. is it possible to find what zip codes in column a appear in column b, and then output those zips?
View 1 Replies
View Related
Nov 15, 2012
Any formula that can look at the data in multiple columns and check for a match - returning a value such as YES or NO. Below is an example of my sheet.
A
B
C
D
E
F
G
1
Name
Number
Name
Number
Name
Number
Match?
[Code] ..........
Basically the formula would be in Column G and would look at B, D, & F to see if they match or not. In the example above - row two - they all match. So a True, 1, or Text option such as YES would be great. Same as row 3 only you can see they are different.
View 5 Replies
View Related
Oct 23, 2013
I have an excel document with hundreds of columns. Each column should not be empty; they must have at least one value. Right now I'm applying a filter and going through each column one by one to make sure that it is not empty. How can I perform this check without having to go through each column one by one?
View 6 Replies
View Related