1. first I export data and directly paste in the "RAWDATA" Sheet.
2.There are 50 columns and each has header like Clientname,date,Id,campaign,websitename,frequecncy etc.
3.Exported data does not have same order
4.so when I paste data in excel I check manually if orders are in correct or not?which takes my long time to review/manually check
Using macro or something else to review the order and if any discrepancy then raise error? Need Excel to check order of columns ?
I have to find the union of 2 columns in excel and club those 2 columns into a single column with values in the increasing order.eg: column 1- 0 2 4.. , column 2- 1,3,5.. final result in column 3 should be 0 1 2 3 4 5...plz let me know the code for this that i can run in VB editor(- excel 2007)
I need a way to re-order an excel worksheets columns based on another worksheet.
Data is extracted from a database into excel however users can configure the columns in the initial system. to how they like This causes problems when the data is copied into an excel spreadsheet I have created as the data copied will not be in the same column order as is required.
How can i reorder the columns without physically having to cut and paste the columns to match?
I have attached a sample spreadsheet.
You will see on the spreadsheet that 'fixed columns' is the order that i require the data however 'variable columns' is not in the same order.
I need to make a excel costing model to calculate various products prices. I am using Excel 2010.
I have many products and do not need all of them displaying at the same time, therefor I inserted a Checkbox (ActiveX Control) that hides my columns that I do not need. I did that by inserting the following and it works fine :
[Code].....
The problem is I now need to lock certain cells so that they can remain fixed and the recipe cannot change.
Once locked my checkbox no longer works and I get the following error :
"Run-time error '1004': Unable to set hidden property of the range class"...
My problem is to create a macro that will list all folders, subfolders and files in an order in excel. So that I know which folders and files belong to which main folder, more like a hierarchy.
For example, Sourcefolder Subfolder 1 File1
I have code that list all files in folders and subfolders, but it does not put them in a hierarchy fashion.
I've been using a VBA code to look through my spreadsheet and find any graphs in any tab and move it to powerpoint. I have about 70 tabs with 7 graphs each.
I have is that the order of the graphs in the slidepack isn't in the same as found on each excel tab.I also tried renaming them (chart1-chart7) but problem still remains.
I looked at threads realted to printing but wasn ot able to find something similar to what I need. So here is my problem:
I have a file with more than 100 worksheets (each sheet contains the invoice for one store). I would like to create a macro that would enable me to determine the order in which worksheets would be printed. How to do it?
Idea #1: the printing order would be based on the value in cell L1 that would contain the route number for each store. Stores belonging to the same delivery route will have the same value in L1. So, the macro should first print all sheets with 1 in cell L1, then print all sheets with 2 in cell L1 and so on...
Idea #2: Creating a separate data sheet with the list of all stores and their corresponding route number. Let's say info is contained in range A1:B150, where Column A contains the name of the stores and column B contains the route numbers. The macro then should look at that list to determine the printing order of the subsequent worksheets (the name of the store in column A would be the same as the name of the worksheet corresponding to that store).
Idea #3: sorting my 150 worksheets manually. It does not solve my problem fully, though, because stores do not always belong to the same route. So the manual sorting should be carried out daily and would not save time at all.
I use a Check Box method to print different sheets within same Workbook. I have a total of 18 Check boxes each check box represents a different sheet that can be selected, but I noticed if one sheet has a lot more data or photos than another it takes a longer to send to printer and in turn causes it to lag behind, at which it causes it to fall out of order. Is there a way to keep it in numeral order or ?
I have several series of 13 figures (from 0 to 20), such as :
000141833000001
I would like to filter those series with the following condition :
Each figure (except the zeros) should be higher or equal to the first figure (found on the right) which is not a zero.
In the example :
14 should be higher or equal to 18 : FALSE 8 should be higher or equal to 3 : TRUE 3 should be higher or equal to 3 : TRUE 3 should be higher or equal to 1 : TRUE
So, the serie is FALSE, due to the fact that 14 is not higher than 18.
I have a sheet which contains a list of products. I have created a check box next to each name with the linked cell in the adjecent column. I have formatted the cell so you can see the TRUE or FLASE.
I need to be able to select different products and then when I run a macro, it places all of the selected products onto the second sheet. I just need it so it lists the products in column A with no blank rows.
Can this be done using Index/Match? Would a macro which achieves all this be possible?
Basically I have manually generated word documents based on a spreadsheet. Now, I need to countercheck the contents of the word documents with another spreadsheet i.e. make sure the courses in the word document for a particular student is same as that reflected on the spread sheet. Is it possible to write a macro for this? I'm a beginner and I'm waaay out of my depth. I have attached sample documents and spreadsheets.
The link to the documents are as follows: Macro to check data from Word documents against an excel spread sheet
My company uses 4 types of barcodes 8, 12, 13, & 14 number barcodes for our products my problem is that I can't figure out how to force the barcode to format properly no matter how somebody enters it if they don't use spaces or put them in the wrong spots, I can't use custom formats because there is 4 different layouts
8 digit should be "#### ####" 12 digit should be "###### ######" 13 digit should be "# ###### ######" 14 digit should be "# ## ##### ######"
these barcodes are in columns L, M, & N also right now 'm using a formula in another cell to verify the barcodes by calculating the check digit and comparing it to the check digit typed the formula i'm using is
I have trying to remove duplicate value for two columns which are not in order since long time. I have listed an example for the purpose. Two rows contains same information in different columns. I just wanted to have one row and remove the other with same information.
I have numerous hyperlinks in cells on a worksheet, next to these I have checkboxes. I am looking for a macro that will check if the boxes are checked and if not ignore them and if so run a certain macro.
I want to use data validation to enforce that every cell is greater than the next cell in that column. I've tried using =OFFSET(A:A,1,0) thinking that it'll return in next one, but no luck.
AS you can see in the attached file, I have several collumns of data going form 2012 to 1992. I would like to know the quickest way to invert this so the data is presented 1992 to 2012.
I want to export some columns of my worksheet to a csv-file. But i don't want to export all of them, i just need for example: Columns B, D and G and inside the csv-file they should be in an different order like G, B, D .
I already thought about using "union" to select the specific columns, but i can't get this to work.
I have a sheet diplaying 5 columns of percentages which I need to rank in descending order, i.e. assign rank 1 to the largest percentage and 5 to the lowest. See the attached sheet.
I have a couple of Pivot Tables that I create each month summarising my Income and Expenditure. The only problem I have is making the columns appear in the correct order, i.e. where July is month1 through June(the following year) being month 12 to coincide with my financial year. Oddly enough last month (January) was fine, following December.
This month January and February appear in columns 1 & 2.
I am working on a spreadsheet with multiple tabs. The basic idea is that I will pull some raw data and paste it into my first tab, and then I can refresh all of the other tabs to reflect the newly imported data. I had a problem recently because when I attempted to pull the raw data because the number and order of columns had changed which messed up my cell references.
My other worksheets would contain cell references that said =table1!a1, and I would drag that formula down to have a list of all employee names for example. I would then filter data based on some of the other information in other columns. I was hoping that I could paste the newly exported data into that table and reapply the filters to view the new list of employees. How can I do this even if the order or amount of columns change? This spreadsheet will be used many times by different people so I need to make it scaleable in case the format of the exported data continues to change. I tried to change the raw data into a table and change the cell references to the column name, but it did not work when the order of the columns changed.
I have a large order spreadsheet with 3 date related columns. One for customer requested delivery date, one for factory quoted delivery date and one for actual delivery date.
I want to be able to set something up that if it gets near either the requested or quoted delivery date (by say a week), that the cell flags red so it's a visual reminder to check whether the order has been dispatched etc.
I have a table with one column of data. The data in this column repeats with 4 relevant pieces of information that I want to put in 4 different columns (fields) in a different spread sheet (or the same would work better and I would just delete the first column when done) keeping the same order the data is now in. The data currently repeats in a regular pattern (i.e. 123412341234 with no other data in between). I would like to do this with a macro. Could someone help write a macro that will do this
How would I reorder columns & tabs based on a form where the user can put them into order that they would like the columns? I forsee some type of form where the user can dsignate the order and then start a macro that will sort both the columns and tabs.
I have a lot of data to try and summarize but they are in multiple smaller tables. I wish to only extract 2 variables, 'number' and 'total' from all of my smaller tables (lots of them) so the problem looks like this, i have these tables for example where the 'total' title is in a different column depending on which of the smaller tables you are looking at:
cat 1 cat 2 cat 3 total
[Code]....
I am trying to get:
number Total 123456 30 234567 60
[Code]...
Because the number column is fixed and all of the smaller tables will all have a number in the same column maybe i can insert a column next to the number column and say "find the value where the column title is 'total' - however the location of the column title would change so not sure if this would work? I was also thinking of sorting the columns but that will not work either because of the smaller multiple tables?
I have a page of planetary symbols (astrology) in 3 columns (A,B,C ) in date order, that I'd like to copy across on the same line (date) ,to a designated column on the same sheet, in order of the ColD symbol it won't show here properly as there's no astro font, just tried it.
eg A B C D E F date Mercury 180 Venus Mercury180Venus " Venus 60 Mars Venus 60 Mars " Jupiter 30 Venus Jupiter 30 Venus
here, we have Venus copied to same line in ColE Mars " " " ColF how to sort the columns, Cols B,C & D themselves could be resorted instead into the order of the ColD symbol-- so I'd have colA, date-- the B,C,D sorted by D, into about 8 Cols to the right
