Check To Match Columns Separate Sheets
Mar 20, 2007
I have a column on sheet 1 which contains 200 lines with a unique number in each row (account codes). I have another sheet (sheet 2) which contains the same column. sometimes an extra row for an extra account code is added to the col in sheet 1. I need to make sure that the col I have in sheet 2 always has exactly the same as the col in sheet one, where the same account code should never be repeated. I am currently trying to setup a sheet where I keep all the checks and controls.
View 7 Replies
ADVERTISEMENT
Jun 9, 2014
In the attached sheet, i have data in 2 sheets in the same fromat. Both the sheets are seperate reports.
Coloumn A is the list of Team Ids, Coloumn B is the Ids of people who are assigned in the team. Sheet 2 also have the same details with changes in the people ID.
i am trying to find if the people IDs in report 1 is the same in report 2. i need a formula that will check if the people ID is matching to the same team ID as in report 1.. If its not the same, the formula should be able to show that.
eg :
In report 1, "197595" in coloumn B is against "4011-11341" in Coloumn A.
I need to check if "197595" is against "4011-11341" or some other number in report 2. If "197595" is not against "4011-11341" in report 2, it should show me " Miss match". if "197595" is is against "4011-11341" in report 2 as well, it should show me "match"Project match.xlsx
View 3 Replies
View Related
Apr 6, 2013
what i am trying to do is look at an entire column, and see if that same date exists in the other Activity tab, if the dates match, then show the activity
here is the formula i am using, =IF($A9=Activity!$A2,Activity!$B2,"No Activity")
my problem is that i am only able to isolate one of the cells,, how do i check the entire column?
in other words, if i select two weeks, those two weeks of activity will show, if i select all weeks, all of the weeks activity will show, right now i can only get one of the weeks
my data looks like the following
1st tab
1/8/2013 - 1/14/2013
1/29/2013 - 2/4/2013
1/22/2013 - 1/28/2013
[Code].....
View 3 Replies
View Related
Feb 20, 2009
I have four columns of data, as follows:
label 1, value 1, label 2, value 2
I need to create a formula in the fith column that for each line will tell excel to:
look for entry in 'label 1' in 'label 2' if there is a match, then subtract value 1 from value 2, display result.
I have tried doing this with SUMIF but am getting nowhere fast....
View 7 Replies
View Related
Apr 1, 2014
I have tried a slew of different formulas but I can't seem to get the outcome I am looking for. I need to make a station comparison for an individual project build based off a master list. Sheet 1 has the individual build with column A as a part number, column b as a description and column c as a quantity required and column D is blank. Sheet 2 has a master list of every part we carry formatted as: column a as a part number, column b as a description, column c as a quantity required and column d as a unique station identifier for that part (which is always a number).
What I am trying to do is match the part number on Sheet 1 Column A to Sheet 2 Column A, and when a match is found, take the unique identifer under column D associated with that part number and have it displayed on Sheet 1 Column D.
Sheet 1 will change with each build, but it will always be the same format in columns a,b,c,d. Basically I have a format on sheet 1 for what is needed to build each custom kit (787 kits) and sheet 2 carries every part we offer along with the identifer in column d (always a number value). I want to create a formula I can easily copy to match the value in sheet 1 column a to sheet 2 column a and add the identifier from sheet 2 column D to sheet 1 column D. The average kit is roughly 120+ parts so doing that for each part 787 times will be a nightmare. Also in case this matters, sheet 1 column A will have the parts arranged in a random order based on what is desired for that kit. Sheet 2 column A has the part numbers in order from our lowest part number to the highest number (basically an entire inventory list sorted from lowest to highest).
Example
(For sheet 1, since it doesnt carry formating 11111111 is in column a, nut, flange is in column b, 1.00 is in column c and the output data i want would go into column D)
Sheet 1
A B C D
11111111Nut, Flange 1.00 *Starts blank* -looking for - Output from Sheet 2 Column D (1)
33333333Bolt, Squared 4.00 *Starts blank* -looking for - Output from Sheet 2 Column D (4)
55555555Bolt, Coated 3.00 *Starts blank* -looking for - Output from Sheet 2 Column D (2)
22222222Bolt, Hex 4.00 *Starts blank* -looking for - Output from Sheet 2 Column D (11)
44444444Bolt, Screw Type 2.00 *Starts blank* -looking for - Output from Sheet 2 Column D (3)
Sheet 2
A B C D
11111111Nut, Flange 1.00 1
22222222Bolt, Hex 4.00 11
33333333Bolt, Squared 4.00 4
44444444Bolt, Screw Type 2.00 3
55555555Bolt, Coated 3.00 2
View 1 Replies
View Related
Dec 15, 2013
[URL]
What im trying to do is match columns A & B from AUDIT Sheet to Columns A & B in MASTER sheet. If they match then pull columns C, D & E from MASTER into AUDIT.
View 9 Replies
View Related
Feb 1, 2013
I need to take the data out of one column from sheet A and compare it to the data on another column sheet B.
Real life example:
I have a very large list of contacts with multiple columns of data. On a separate spreadsheet, I have a list email addresses that I need to remove from the larger list of contacts. How can I compare them against one another to detect any matched email addresses for deletion?
List of contacts is appx 130mb
List of email addresses is appx 4mb
View 2 Replies
View Related
Aug 29, 2007
If you open the attachment.. then you will see that Column A has all the names and Column B has it's Value.. likewise.. Column D has all the names and Column C has it's values...I'm trying to first match the names from Column A to Column D and then see if Column B matches to Column C..
View 8 Replies
View Related
Sep 26, 2013
I need a macro that will combine/consolidate rows when cells from 2 separate columns match. example...
beginning:
Column A column B column C column D column E
row 1 Seminole 80 unleaded 1064 100100
row 2 Seminole 36 clear dsl 825 100100
row 3 Seminole 80 unleaded 1101 100100
row 4 Seminole 30 dyed dsl 3421 100100
This is what I need the macro to do:
Column A column B column C column D column E
row 1 Seminole 80 unleaded 2165 100100
row 2 Seminole 36 clear dsl 825 100100
row 3 Seminole 30 dyed dsl 3421 100100
View 2 Replies
View Related
Nov 15, 2012
Any formula that can look at the data in multiple columns and check for a match - returning a value such as YES or NO. Below is an example of my sheet.
A
B
C
D
E
F
G
1
Name
Number
Name
Number
Name
Number
Match?
[Code] ..........
Basically the formula would be in Column G and would look at B, D, & F to see if they match or not. In the example above - row two - they all match. So a True, 1, or Text option such as YES would be great. Same as row 3 only you can see they are different.
View 5 Replies
View Related
Sep 24, 2009
I just need an macro which can compare two sheets and give an output as matched or not matched.
I Have data in Sheet1 and Sheet2. In Sheet1 i have 4 columns of data and in Sheet2 aslo the same set of data.
If any of the four Columns of sheet1 or sheet2 is not matching then should pop-up not matched in the last column.
I Hope someone has the best solution for my query .For more clarification iam attaching an sample sheet.
View 4 Replies
View Related
Apr 10, 2007
I have a list of names on 2 separate sheets that I need to modify. If I have a name on sheet1 matches a name on sheet2 I would Like to add a "space" then "(SV1) at the end of the text string on sheet2. I have a list of 1500 and will only have to modify 75-100. Example shows on sheet2 how I would like the desired outcome to be.
View 3 Replies
View Related
Aug 30, 2013
The columns that I want to match up are not exact matches. Multiple values from sheet1 colA can match up to one value in sheet2 colA by using the first 5 characters of the cell value.
Here is the workbook to go with the sample data set I put below.
HowDoIMatch2.xlsm
As of now, the formula is generating a 2 in the banana row. But there are no bananas documented in sheet2.
How can I get my output to Sheet1 ColB to be accurate without having to create new columns/data with truncated values for the lookup?
If I use this formula in Sheet1 ColC (then copy downwards /autofill):
[Code] .....
to grab the Sheet2 colB. It works fine except for in the cases where sheet1 colA values have no match in sheet2 colA (i.e. Sheet1 A4-banana1).
That vlookup formula will output SOMETHING because of the nature of MATCH using either -1 or 1 as a match_type option. I cannot use MATCH if I want to solve this issue...but I do not know what else to do.
Sheet1
a..........................b.........
apple1........=formula
apple2........=formula
apple3........=formula
banana1......=formula
coconut1......=formula
donut1.........=formula
Sheet2
a.....................b.....
apple123...........1
coconut123........2
donut123...........3
I know of a roundabout way to do this but I would like to stay away from "creating new data". (Create/insert a new column in Sheet2. The first row would be =Left($A2,5) then downfilled. This way I can use exact value in the MATCH formula in Sheet1's VLOOKUP.) If VBA is the only way I can "automate" this lookup output to be correct, then that is the road I'll have to take
View 3 Replies
View Related
Mar 13, 2014
I've got a problem where I am trying to return a value if two criteria from one table match two from another.
I have included a example of my issue.
=INDEX(Time!D:D,MATCH(Data!A2,Time!A:A,0)*AND(MATCH(Data!C2,Time!C:C,0)))
I have had a look around lots of forums but cant get my head around what is wrong with my formula
View 4 Replies
View Related
Aug 10, 2009
This is driving me nuts. What I have is:
Sheet1:
ColumnB - number stored as text (Work ID)
Remaining Columns: - mixed data, some columsn numbers, some text
Sheet 2
ColumnA - number stored as text (Work ID)
ColumnB:ColumnAW - mixed data, some columsn numbers, some text
CollumnAX - Dollar Values
What I want is in Column F (Sheet1) a formula to:
if workID in Sheet1!ColumnB is present in Sheet2!ColumnA AND Sheet2!ColumnAX>1 then return True
View 9 Replies
View Related
Jan 20, 2009
I would like to match column data in a source spreadsheet to column data in a target sheet. If a match is found, I would like to copy the corresponding row range from the source sheet to a separate, third sheet. For values where no match in found in the a target sheet, I would color the unmatched cell in the target sheet red. If a match was found, the cells would be colored green. The data in the Source sheet is in column A, while the Data in the Target sheet is in Column T. The data will be pased in the third sheet in Column T preserving original formats
I have this code, gleaned from several postings on this forum that somewhat works. The problem is that I get false mismatches (i.e. some cells get colored red even when there is a match and the data got copied to the third sheet) even though there are no duplicates. I have made sure that the formats are identical in both Target and Source sheets to try to fix this. Also, I don't want to cut the entire row , but just copy and paste a row range onto a third sheet. The column and row ranges are variable. I am attaching a file.!!
Sub CutRows()
Dim i As Long, k As Long, n As Variant, r As Range
Application. ScreenUpdating = False
With Sheets("Source")
Set r = Range(.Cells(1, 9), .Cells(65536, 6).End(xlUp))
End With
k = 0
i = 6
While Not IsEmpty(Sheets("Target").Cells(i, 20))
n = Application.Match(Sheets("Target").Cells(i, 20).Value, r, 0)
If IsNumeric(n) Then
Sheets("Target").Cells(i, 20).Interior.ColorIndex = 35
k = k + 1
Sheets("Source").Rows(n).Cut Sheets("Sheet3").Rows(k)
Else
Sheets("Target").Cells(i, 20).Interior.ColorIndex = 3
End If
i = i + 1
Wend
Application.CutCopyMode = False
Application.ScreenUpdating = True
End Sub
View 7 Replies
View Related
Nov 20, 2012
I receive an extraction from AutoCAD that lists the electrical devices in a drawing. I don't have any problems extracting the letters. I have a problem extracting the device number and the device number extension.
The device label extraction is similar to this:
DCM1005-1
DCM1005-10
DCM1005A
MTR1005-1
MTR1005-10
MTR1005A
I want to create 3 columns from the device label: (I separated the column with commas)
A1, B1, C1, D1
DCM1005-1, DCM, 1005, 1
DCM1005-10, DCM, 1005, 10
DCM1005A, DCM, 1005, A
MTR1005-1, MTR, 1005, 1
MTR1005-10, MTR, 1005, 10
MTR1005A, MTR, 1005, A
View 5 Replies
View Related
Oct 9, 2013
How can I separate the following numeric/text combination into two (2) separate columns in Excel?
302ALTO
406AMZN
451AMRC
404AMAD
605ANCC
405ADRC
The result would be:
302 ALTO
406 AMZN
451 AMRC
404 AMAD
605 ANCC
405 ADRC
View 6 Replies
View Related
Oct 13, 2008
I'm trying to compare values in 2 separate columns to see how many times the same value appears in both columns. Ideally I would be able to insert a range function to compare the values in the column "ID 1" against the values in column "ID 2" and return the count of times that a value appears in both columns. For example 2122, 1112 and 1718 appear in both columns and I would like the formula to return a count of 3.
ID 1ID 2
12342122
45671112
89101718
11122678
13144544
15162324
17189987
19201215
21221928
1976
2576
2345
4678
In my actual project I'm comparing 2 columns in the same worksheet. The column are column B with data in cells B2:B10266 against column C with data in cells C2:C18560.
View 4 Replies
View Related
Dec 15, 2009
i have weights entered in A1 , B1 , C1 and I manually enter almost same weight in D1, E1, F1 . Now I need the result as " OK " in G1 if the weights A1,B1,C1 match with D1,E1,F1 if it doesn't match then result should give "Please check again".
View 9 Replies
View Related
Jan 6, 2014
What I need is to lookup the matching 2 key IDs (i.e., ISIN and Firm_Quarters) in Sheet2 and then return the variable (i.e., market cap) in Sheet1. I have done one manually highlighted in yellow.
View 4 Replies
View Related
Nov 5, 2009
I would like a formula that will take the info from 2 cells (not adjacent to each other or in the same row) and then look these up in a table giving the answer in the 3rd column somewhere else on the worksheet.
View 5 Replies
View Related
Sep 29, 2011
I have been working on this 2 weeks and have finally come to the conclusion. I am trying to use index/match to find an article number in any 1 of 3 attribute files workbooks. I have been am using Vlookup, but the Master attribute file workbooks DO NOT list the article number in column A (but list them in F) and therefore I have been creating an altered copy every month to place the article numbers in column A so VLOOKUP would work. Index/Match would be a more efficient look up formula as I could link directly to the Master Attribute files without altering the workbooks.
Below is the formula I have been using that looks in 2 attribute files workbooks
=IF(ISNA(VLOOKUP(A8,'C:Recon Workbook FilesService FilesAttributeFiles[TireAttributes.xlsx]TireAttributes'!A:C,2,FALSE)),
IF(ISNA(VLOOKUP(A8,'C:Recon Workbook FilesService FilesAttributeFiles[PartAttributes.xls]PartAttributes'!A:D,2,FALSE)),"",
(VLOOKUP(A8,'C:Recon Workbook FilesService FilesAttributeFiles[PartAttributes.xls]PartAttributes'!A:D,2,FALSE))),
(VLOOKUP(A8,'C:Recon Workbook FilesService FilesAttributeFiles[TireAttributes.xlsx]TireAttributes'!A:C,2,FALSE)))
Below are the three (the new formula would incorporate a 3rd attributes workbook "Other" to the search criteria) Index/Match formulas I would like to "Tie" together to find the article number in any of the 3 attribute files workbooks and return column A if the article number is present or nothing if the article number is not present in any of the 3.
=INDEX('C:JDAAttributeFiles[OtherAttributes.xls]OtherAttributes'!A:A,MATCH(A8,
'C:JDAAttributeFiles[OtherAttributes.xls]OtherAttributes'!F:F,0))
=INDEX('C:JDAAttributeFiles[PartAttributes.xls]PartAttributes
[Code] .....
View 9 Replies
View Related
Nov 16, 2011
I'm trying to automate a search and match function between two separate workbooks using VBA and am having some problems. I'm using the following line:
search_results = Application.Match(temp, Range("E1:E900"), 0)
which works fine. now the problem is that when i'm searching for lets say "ABCD" in one of the workbooks, if there is an entry "ABCD " (with a space at the end) it says that the entry doesn't exist. is there any way of correcting it such that it would always neglect the space at the end if it exists? i tried using -1 instead of 0 and it messes up, so i'm not sure what to do.
View 2 Replies
View Related
Jun 3, 2014
I am in the process of creating a Phone Roster for my unit. On Sheet1 is their administrative data (Name, Position, Phone Number, etc.). What I am attempting to do is use a formula to find the persons name for that position and place it in the appropriate position and then their phone number below.
Admin!H:H contains the positions
Admin!B:B contains their name
Admin!N:N contains their phone number
I believe the following is what I need =LOOKUP("Operations NCO",Admin!$H:$H,Admin!$B:$B) and it works, but only for the first person on Sheet 2. After that it is random. If there a different formula I need to use to make this work?
When I get the phone number I used =LOOKUP("Operations CO",Admin!$H:$H,Admin!$N:$N) and the same thing happens. It works for the first person and everything else is incorrect.
A problem is the Admin sheet is listed alphabetically, not by position, so I cant use a specific cell to copy the data. I need the formula to find the position, then find the name and phone number of the person in said position.
View 5 Replies
View Related
Jun 12, 2014
I created 14 spreadsheets for each of my call center agents to monitor their metrics. I password protected all then placed the originals on the network. The 14 sheets have 1 cell within them that are linked up to their relevant agent cell in a separate spreadsheet. This spreadsheet is located on the network and automatically updates every hour.
I have monitored the the spreadsheets and updates etc for a while now and everything seemed to be working perfect. So I decided to slowly roll it out by placing a shortcut on 3 agents desktops. I quickly discovered that they were not seeing any updates as I had seen prior to the roll out. I go to the folder within the network and check all spreadsheets and I see all spreadsheets working and updating successfully.
So I thought maybe it was because they were password protected. I removed the protection and the 3 agents saw their spreadsheets update successfully on their computers, the next hour as I had hoped BUT the hour following however they did not see a further update again.
View 8 Replies
View Related
Nov 7, 2013
Is there a way of getting excel to highlight duplicates within 2 separate sheets, one beside the other on screen?
View 14 Replies
View Related
Feb 10, 2012
I have a raw data worksheet with 54000 lines, in the format of six columns
In Column A is the USER Name
What I would like with if possible is code that will move the six columns of data from each individual USER into separate sheets, using Column A as the basis of the new sheets, ie the last row for each user is when the user name changes to the next one.
View 2 Replies
View Related
Mar 6, 2014
I'm currently using the following code (that I found online) to take a list of data and copy it to specific sheets based on the values in Column C (there are only 4 columns in my data set). The issue I have with it is that it's meant to create the sheets from scratch every time. What I could like, however, is for it to copy the data to preexisting tabs that are already named with the sames values that are found in Column C. This macro will actually perform that but the down side is it wipes out everything that's on those sheets but I cant have it do that. Is there a way to either modify this sheet so it only copies the four columns and only pastes the four columns onto the sheets?
Sub SplitData()
Const NameCol = "C"
Const HeaderRow = 2
[Code]....
View 5 Replies
View Related
Jun 26, 2008
below is a VB code to email separate sheets based on sheet anme and email address on a sheet called " mail".
Code seems to fail at the last line " Next a" any ideas why this is not working
Sub Mail_sheets()
Dim MyArr As Variant
Dim last As Long
Dim shname As Long
Dim a As Integer
Dim Arr() As String
Dim N As Integer
Dim strdate As String
For a = 1 To 253 Step 3
If ThisWorkbook.Sheets("mail").Cells(1, a).Value = "" Then
Exit Sub
View 9 Replies
View Related
