Check For Plus/Minus Condition
May 31, 2007With out using Conditional Formatting, how can I check a cells value if it can fall within a range of +-.002?
I have this code but it seems to have limitations.
ADVERTISEMENT
Check If Condition Is Met
Nov 7, 2006Private Sub cmdNext_Click()
' Save form contents before changing rows:
SaveRow
' check that it is not the last row - if it is then show message
' and do not go to next record:
If Sheets("Data"). Cells(lCurrentRow, 1).Value = "" Then
MsgBox "This is the last Output."
lCurrentRow = lCurrentRow - 1
Exit Sub ' Abort if no data:
Else
LoadRow
End If...................
I'm having trouble with is the bit where it is supposed to ask for the txtAddInfo to be filled (if blank) and if the txtdifference is greater than 10% or less than -10%. It seems to work fine if the txtDifference is less than -10% but not if the txtDifference is greater than 10%. It just seems to get stuck, the message box is displayed even if txtAddInfo has infomation within it.
I'm not sure why as I use ..........
Check Delete Condition
Sep 23, 2007Suppose I have a excel sheet,in this sheet has 7 columns(A to G).I need to do with my sheet with this condition.
-Keep the rows that have the same value of datas in column A,C,G and they must have different datas in column E and F.
-The other row that not same as above condition must be deleted.
VBA Check Condition Until True Before Moving On?
Jan 17, 2012Is it possible to have excel continually check if a columns used row count in a particular column is greater than a number before moving on to the next part of code?
The reason I'm doing this is because one formula will pull in data from bloomberg which can take some time (5 seconds or so).
Some other code that places formulas into other adjacent columns depends on the number of rows in the first column. So the code following the data pull wil fail if the above hasn't finished pulling yet.
I was thinking about doing something like a do nothing until true?
Here's what I have that is not working:
Do Until Range("A1:A6").Cells.SpecialCells(xlCellTypeConstants).Count > 5 Range("F1").Select
Loop
I expect that the number of used rows in column A should be greater than 5 once data is pulled. In this case I just had VBA select F1 until the count was greater than 5 before moving on. but I think it's interfering with the pull and will coninue to loop..
Prevent Click On Check Box If Condition Met
Oct 20, 2006I have two check boxes in a worksheet created from the "Forms" toolbar.
Is it possible to prevent a user from clicking these two check boxes if he meet a condition in cell A1.
Eg, If cell A1 value is "Marketing", the user is not able to click on these two boxes.
Match Columns To Check If Condition Met
Aug 29, 2007If you open the attachment.. then you will see that Column A has all the names and Column B has it's Value.. likewise.. Column D has all the names and Column C has it's values...I'm trying to first match the names from Column A to Column D and then see if Column B matches to Column C..
View 8 Replies View RelatedAdd Conditional Formatting Based On A Check Box Condition?
Aug 21, 2014I would like to change the color of a cell to either green, yellow, or red based on a few conditions. One of the conditions would be based on whether a check box was checked or not.
View 2 Replies View RelatedCheck Column For Unique Entries And Add One Further Condition
Sep 17, 2009I need to count all unique entries in column A (list of names) (this bit I can do!)...however:
Column B gives each name a value of A or B, I need to count all unique names with an A and all unique entries with a B.
eg
Matt A
Matt A
Matt A
Bob A
Tom B
Tom B
This would give a count of 2 for A's and 1 for B's.
Return 1 Result From Many Based On Multiple Condition Check Of Cell Value
May 21, 2008I am trying to write a formula to figure out Body Mass Indexes for certain age groups and whether or not they fall into a High or Low risk category. So, I am trying to write a formula that does the following. I have 3 columns, Gender, Age and BMI. I need the formula to do the following.
IF Gender = M AND Age >18, <39 AND BMI >7%, <19%, Then return an "L" into 4th column
IF Gender = M AND Age >18, <39 AND BMI >19%, Then return an "H" into 4th column
IF Gender = M AND Age >40, <59 AND BMI >14%, <23%, Then return an "L" into 4th column..............................
Update Logic In Attached Macro To Include Condition To Check Data Not Existing
Mar 17, 2013I have attached excel with the logic I am using, but I have a problem and needed logic to update to make sure it is not inserting same data (duplicate data).
Please update the logic so that if it is having same data in sheet 3 it should not insert or delete duplicate.
Code:
Public Sub CopyData()
Dim ws As Worksheet, bi As Byte, vData(1 To 9), bi1 As Byte, vData1(1 To 9), bi2 As Byte, vData2(1 To 9), bi3 As Byte, vData3(1 To 9), bi4 As Byte, vData4(1 To 9)
Set ws = Sheets("Sheet2")
For bi = 1 To 9
[Code] .........
+ 0.1 Minus
Jan 20, 2010I have part if the code here’s
PHP
Range("f" & indexI + 1).Value = Format(Strl, "00:00")
to return value = time formats
How do I modify it to + 0.1 minus?
Sample
IF the return value = 12:00:00
Now I wanted = 12:00:01
Cell Equals 0 Changes When Condition Met - Leave Unchanged When Condition False
Mar 24, 2014I am trying to perform a calculation in a cell that leaves the value 0 if before Feb 2014, changes to the value of another cell in Feb 2014 and leaves the value unchanged if after Feb 2014. I can get to the Feb 2014 value but after that month the value changes to 0.
The Cell formula that I am trying to use is as follows:
=IF(YEAR($A$3)<2014,"0",(IF(YEAR($A$3)>2014,H114,(IF(MONTH($A$3)<>2,H114,AA118)))))
A3 contains TODAY()
H114 is the cell being calculated
AA118 is the cell containing the calculated value for the current month.
Multi Condition Format? Lookup And Date Condition Valid For
Aug 13, 2009I would like to try and achive a conditional format that will require a lookup function. when the condition is met it places Yes or No into a cell and changes that row colour to red for the NO condition. and after 10 days from now the rowcolour is removed.
View 6 Replies View RelatedUse Plus Minus Variables
Nov 30, 2008Trying to work out the formulas for placing plus minus variables above and below a cell as per worksheet attached. right hand side of the page
View 2 Replies View RelatedTan To The Power Of Minus 1
Dec 10, 2008How can i produce "tan to -1 " in excel ?
View 9 Replies View RelatedDate Minus A Day
Dec 16, 2013I use a formula that has a date in it 11/15/13 for example. Then I have a formula that calculates "days" (15), but I want to subtract one. How do I do that?
View 2 Replies View RelatedGreater Than Or Less Than (Plus Or Minus)
Jul 19, 2006Here is my formula.
=If(Sheet1!J5=$J$4,0,(Sheet1!$J$4-Sheet1!J5)*Sheet1!$J$1)
It is perfect, except it doesn't have one final step. What I need it to do
is be able to do that ONLY if it is greater than or less than by a specified
amount. So there needs to be a modification of ... Sheet!J5<> (but by 100 or
any other number that I set) $J$4,...
Difference Between Two Days And Minus A Day
Jan 3, 2014Assuming the first date is in A1, and the second date is in B1, in standard dd/mm/yyyy form, my current formula is =B1-A1-1.The '-1' is due to the fact that if a patient stays for 10 days, they will only spend 9 nights in the hospital. (Bed Nights).The problem is, the formula is stretched in the total column from, say C1 to C50. Each one of these has, or will have, a number of days in it.However, due to having th '-1' in the formula, empty rows that are yet to have a patients details inputted have a -1 where I need a 0. The only reason I need to change this is because I need a running total of the bed nights of all the patients.I think the formula I'm after is something along the lines of; 'If cell B2 is empty, input 0. If B2 has a date, use formula 'B2-A2'
View 9 Replies View RelatedPlus Or Minus Sign In The Beginning?
Jul 29, 2008I want to save phone no as +99 9876543210 in excel 2003 on my xp pro machine. But if i give a + sign in the cell, some blue dotted rectangle shows up and everything messes up.. I think it is treating it as a formula or something... how can i save this in the cell. tell me in detail if you are going to tell me about macros or vb code as I don't know how to insert code or program macros.
View 3 Replies View RelatedAverage Last Five Numbers Minus The Low And Hi
Apr 23, 2009=AVERAGE(INDEX(E5:IV5,LARGE(IF(E5:IV5<>"",COLUMN(E5:IV5)-COLUMN(E5)+1),5)):INDEX(E5:IV5,MATCH(9.99999999999999E+307,E5:IV5)))
I have this formula where it averages the last five numbers in a collumn, but I want to average the last 5 numbers less the max and min number.
Show Zero If Amount Is A Minus
Nov 19, 2008I need a formula that that will show £0.00 if the amount is under zero, i have a formula k15/o15 that gives me a amount but if this is under zero i need this to show as zero not -£70 for example.
View 3 Replies View RelatedDiplay Minus Hours In Red
Feb 20, 2009I am using time based on the 1904 calendar, this is so time can be shown as a minus figure when to cells are taken away and the result is say -17:25. What I want to do via conditional formatting is show any minus hours as red. Tried various options but I have had no luck so far. or can this be done via VBA?
View 6 Replies View RelatedAverage Minus Most Recent Row
May 4, 2009I have a table in a sheet where the rows of data are filled in automatically from other sheets. Each row represents a different week. The data, (lifted from from the relevant worksheet for each row) represents the no. of calls in each week.
Now, I've set up an average to be calculated from the data - it'll do this for every row as long as there is data present. (If the row's corresponding worksheet doesn't have any data the result will be "NA()" - not included in the calculation.)
However, I don't want the average to include the no. in the "most recent" row, as this is "live" data and until the week is over does not represent the data for a full week and therefore skews the average.
So I want the average to exclude the data in the most recent row with a numerical value in it and not a "NA()"
ie - column could be ......
Minus Percentage In Formula?
Aug 28, 2002I need to write a formula to minus a percentage of a total.
for example I want to take away 20% of the total of £8.75.
Workbook Name Always Changes By (minus 2 Business Day)
Feb 13, 2012My file name constantly changes, it will always be (minus 2 business dates from today)
Now when my macros run it goes between different worksheets so I need to tell it to go to right workbook. I tried below but getting an error 438 'Object doesnt support this property or method'
Code:
Workbooks("file " & Format(WorksheetFunction.WorkDay(Date, -2), "MM DD YYYY") & ".xls").Activate
Sheets("data").Select
Select USED Range Minus 1 Row
Oct 10, 2008I need to sort some data on a spreadsheet but I am uncertain on how to select the used range.
I just want a piece of code that will select WHATEVER area of the sheet is populated with data. The sheet I will be doing the selecting on is titled "Master".
To add to it I DO NOT want ROW 1 included in the selection.
How I Can Minus Number From A Month?
Dec 2, 2008In an excel file i have two fields,
Month to Start - is a combobox with 12 months, next is
Month to go back - is a textbox, here specifying number of months to go back.I need to store month names by minus the existing month - number in a textbox
eg: if Month to Start is 'September' and Month to go back is 2, then what i need is September & August in an array or separate variables.
How I can minus number from a month?
Change All Values To Minus
Jun 11, 2009I have a spreadsheet which contains values and text. Would I be able to change selected values to a minus value by clicking one button?
A2 = 200
A3 = 300
A4 = 1000
B3 = 50
C5 = 600
Changes to
A2 = -200
A3 = -300
A4 = -1000
B3 = -50
C5 = -600
I would also like the option to change them back again as well.
I have about 40 values so do not want to do this manually.
Macro Minus Numbers
Jul 11, 2009How do i stop changeCell from going into the minus?
Sub goalSeekSample() Dim seekValue As Double Dim changeCell As Range Inflation = Range("O7").Value seekValue = InputBox("What's the value to seek?") For Each changeCell In Range("N18:N32").Cells changeCell.GoalSeek Goal:=seekValue, _ ChangingCell:=changeCell.Offset(0, -4) seekValue = seekValue + (seekValue * Inflation) Next changeCellEnd Sub
How To Show Minus Value In A Formula As Plus Sign
May 31, 2014I have attached here an excel sheet with some data. I need to show the minus value in D5 as a plus sign, is there any conditional formula to work this out??
View 4 Replies View Related