I have a table in a sheet where the rows of data are filled in automatically from other sheets. Each row represents a different week. The data, (lifted from from the relevant worksheet for each row) represents the no. of calls in each week.
Now, I've set up an average to be calculated from the data - it'll do this for every row as long as there is data present. (If the row's corresponding worksheet doesn't have any data the result will be "NA()" - not included in the calculation.)
However, I don't want the average to include the no. in the "most recent" row, as this is "live" data and until the week is over does not represent the data for a full week and therefore skews the average.
So I want the average to exclude the data in the most recent row with a numerical value in it and not a "NA()"
I am trying to automate a process involving a Grubb's outlier test and calculating averages/stdev of a set of numbers. I have the data in one column and have calculated the average/stdev/%CV of that data. I have also added a formula to calculate Max/Min outliers of that column of data. Then there are cells with IF statements that display either "yes" (for an outlier present), or "no" (if no outlier is present). What I would like to do, if it is feasible, would be to set up formulas to recalculate the average/stdev of the column, taking into consideration either the presence or absence of outliers.
Here is what I invision(cells are for example purposes)
=IF((M9 = yes, Avg(H2:H40)-max(H2:H40)),M9 = no, avg(H2:H40))
So it would calculate the average without the outlier if the outlier "yes" was present, or just calculate the average if "no" is present.
I would also do this with a minimum outlier as well, but i can set that up if this first one is possible.
I have 31 cells (say in A1 thru A31), representing days of the month, that daily number values will be entered. I want to be able to select the value in the most recent day cell, not the most recent updated cell... i.e. the cell in the A1:A31 range closest to the A31 cell.
For example... Say I have values: 2,4,7,12 in A1 thru A4, I want the value in A4, even if I just updated Day 2's cell... because A4, or Day 4, is closer to the end of the month.
Column Q is a vlookup which looks up dates contained in column P within a range called "Query_From_Price_Database" and returns data from column 3 as indicated below:
=VLOOKUP($P4,Query_from_Price_Database,3)
What I'd like to achieve for each time a value is returned as being "0", is for the cell to display the most recent data.
Where there would be zeros, data is displayed from the most recent date actually containing non-zero data. Is this possible with a "not too complicated" formula?
I've tried a few methods, but they only seem to result in "formula too long" errors.
I am familiar with SUMPRODUCT and {SUMIF}, but I am stumped on how to create a formula that can sum (or count) the only the most recent entry for each Name. The Name field is dynamic and constantly updated with a unique reference number, so I don't want totals by Name/Type, but rather only the newest Ref for each Name by Type.
I have one spreadsheet with a list of materials by material number. I have another with all sales activity. How can I pull into the first spreadsheet the date of the latest activity from the second spreadsheet?
I have a workbook to keep track of names and dates of a specific action. There are 10-15 names that recur on the list. The most recent action is added to the bottom of the list. The names are in column I and the date of the action is in column J.
The problem is having to scroll through the list to find the most recent action for each person. Ideally i'd like to have a list of the names in column N and then in column O the most recent date in the list for each name.
I am trying to figure out how I can write formulas that look for trends in the data. I will be entering more data every day. I need to look at the 5, 10, 20 most recent results for each number.
For example, I need to see how many times yes was answered for #3 in the most recent 5,10, 20 entries.
I am sure there is some simple way to do this with a control + f formula, but I don't know how to do it.
Is there a way to list the recent changes to an excel document on the document itself?
For example, I have just 4 or 5 columns in the sheet, but out the the right on the 7th column I'll have a header that says "Recent Changes". Below that for X amount of rows, I would like it to keep a running change list something like this:
B14 was changed from '6.021' to '6.5' by username on 10/21/07 3:45 pm A23 was changed from 'Sally' to 'Billy' by username on 10/21/07 2:30 pm
I thought this up by looking at the way the "Track Changes" functionality works on the Tools menu. That will highlight the cells in blue as they are changed and will also let someone look back through changes to let them accept or deny.
I have data, which has an oil well that has had sections of its pipe perforated.
This has all happened on different days throughout the wells life.
I need an equation that says TRUE if the Perforation is the Most Recent for that well.
But I also need it to say True at different Top and Bottom Depth intervals throughout a specific well.
(for example: the last row in this data. Says TRUE even though there are more recent dates in this well.
This needs to say true because this is the most recent perforation in the top and bottom depth interval 9526 to 9536.
The other most recent perforations happened in shallower intervals, ie. 9456 to 9480.
So I need something in the equation that will say true to the most recent start date, if that top and bottom depth interval has not already been selected as true.
I need to have a column that says True IF the start date is the newest (most recent) for each individual well.
Easy enough.. But. I also need this to say True multiple times at different dates for each well.
For example below. it says true on 7/22/2001 three times and then True again on the last row on 10/14/1992.
It has to say true there because this is the most recent perforation that Top_Depth and Bottom_Depth interval.
WELLNAME TOP_DEPTH BOTTOM_DEPTH START DATE IF most recent Perf
I want to lookup an ID which there may be three of, but I would want the most recent date out of the three ID. I can get this to work by putting the column in ascending order but this is not very practical.
Is there any way I can do a lookup and add a date parameter to lookup the most recent?
I'm tying to finds the most recent X or O. Then takes the price on that day and compares it to the current price and based on the difference either higher or lower puts out an X if the current price is higher and an O if the current price is lower by the Half StartData - however when i get to about 6 IF statement it freeze up and it wont give me the X or O's ...
I have spreadsheet set up to calculate me and my friend's handicaps. I have set it up almost completely. The only problem is that I forgot one little detail when setting it up: handicaps only calculate the 20 most recent rounds of golf.
Rather than only storing the newest 20 rounds, I would rather add a layer to my formula to filter out older records for me.
In the "Score Entry" tab on my spreadsheet the date is in column D. Is there someway to modify this formula to filter anything beyond the previous 20 rounds?
For the sake of better communication the "Rounds" named range is a list of the number of total rounds played and the corresponding number of rounds that should be used to calculate the handicap.
I need help with summing the corresponding data to the most recent 7 days.
I have the dates (dd/mm/yyyy) in row C1:AH1 and data immediately below it in C2:AH2. I believe that using some formula including SUMIF & LARGE might work but I haven't been able to figure it out myself or find examples posted in the forums here.
I use a formula that has a date in it 11/15/13 for example. Then I have a formula that calculates "days" (15), but I want to subtract one. How do I do that?
It is perfect, except it doesn't have one final step. What I need it to do is be able to do that ONLY if it is greater than or less than by a specified amount. So there needs to be a modification of ... Sheet!J5<> (but by 100 or any other number that I set) $J$4,...
I have a list of numbers column A and a list of dates in column b, i need a formula which looks up the most recent for each of the numbers. can this be done?
I coordinate nearly 200 volunteers for a small non profit using excel. I use excel to keep track of all volunteer information as well as for scheduling shifts. Currently I'm looking for a way to show what the most recent shift a volunteer performed was.
All of this information is kept in different tabs in the same document.
In the "Volunteer" tab you'd find all of the information for the volunteers: name, phone number, email address, number of shifts they've completed, etc.
In the "Shifts" tab you'd find the information for each shift including: Shift Date, Name of Volunteer, Location of shift, etc.
I'd like to find a way to show in the "Volunteer" tab what someones most recent shift was. The only way I've been able to think of would involve a ridiculously complicated series of =if() statements, which would be more hassle than it's worth.
I've had my Excel 2007 set up for the longest time to show the 30 most recent files when clicking on the office button. After changing it to 50 the office menu in Excel runs off the bottom of the screen and I can no longer get ot the options at the bottom to change it back. Does anyone know the registry key to modify this setting back to the 30 that allowed the full menu to be visible?
Here's an example of what my data looks like, in reality there's 1000's of rows and 100 columns...
[Code] ........
So, what I'm after is the most recent date on which a user goes over 2000. I've populated column I manually with what the value *should* be, I just can't figure out how to do this with a formula.
Using Excel 2007, have attached the sample data as an xlsx too.
Have a sheet with 24K rows. Column A is client name. Column B are check dates. The info is sorted by client then check date. Clients can have one to many check dates, so I client is listed as many times as there are check dates. If ten checks, then ten rows for that client. One check then one row for that client.
I only want to keep the last/most recent check date for each client, deleting all other rows for that client with check dates before the most recent. I believe I need to step through the file comparing column A, row by row, to see if I have a match for the next row in A. If no match I keep that row, because there is only one check, and move down one. If a match, then I delete the current row.
I've got this code that will copy data into my worksheet from the most recent .IRP file generated on my C:/ drive. Along with copying the data to my worksheet, I'd like to have a copy of the IRP file copied to a folder on my L:/Drive.
In the code section I've commented out the code that allows the data from the most recent file to be copied to my worksheet. I found code that supposedly will copy a file to a new directory. I want to combine this into my code to allow both to happen. Here's my attempt.
