VBA Check Condition Until True Before Moving On?

Jan 17, 2012

Is it possible to have excel continually check if a columns used row count in a particular column is greater than a number before moving on to the next part of code?

The reason I'm doing this is because one formula will pull in data from bloomberg which can take some time (5 seconds or so).

Some other code that places formulas into other adjacent columns depends on the number of rows in the first column. So the code following the data pull wil fail if the above hasn't finished pulling yet.

I was thinking about doing something like a do nothing until true?

Here's what I have that is not working:

Do Until Range("A1:A6").Cells.SpecialCells(xlCellTypeConstants).Count > 5 Range("F1").Select

I expect that the number of used rows in column A should be greater than 5 once data is pulled. In this case I just had VBA select F1 until the count was greater than 5 before moving on. but I think it's interfering with the pull and will coninue to loop..

View 5 Replies


Return Values Of Adjacent Cells When Condition Is True Omitting Values Where Condition Is False?

Jan 15, 2014

Here's a simplified example:




[Code] .........

I'm looking to return the values in column A adjacent to the cells in Column B equal to "Y". The kicker has been returning only the cells where the condition is true. Column C displays the desired behavior.

The closest I've been able to get is with a simple IF statement but I'm pretty sure the answer is a far cry away from there and likely requires an array formula. I'd prefer not to use VLOOKUP or OFFSET but will if the alternative is very complex.

View 7 Replies View Related

Subtract Days Between Due Date And Today Date If Condition 1 And Condition 2 Are True?

Feb 2, 2014

I need cell (O4) to display days overdue or days remaining on an assigned task based on subtracting due date (M4) from todays date, but only perform days subtraction function if (M4) is not blank and only if task complete cell (N4) is less than 100.

Have the conditional blank cell figured out, but nesting another condition for the less than 100 complete cell. So in other words, I don't want cell (O4) to subtract days and display any error, irrelevant data if there is not any due date entered or the task is entered as complete...

View 3 Replies View Related

Pop-Up Notification IF Condition Is True

Dec 10, 2009

I have a row of values TRUE and FALSE from a IF statement..

If one or more are true can i get a notification to come up saying

"Rents are Due" Press ok to continue..

View 11 Replies View Related

Joining Value If Condition Is True?

Feb 19, 2014

Below is the data layout. I want to join values in value column if Condition is true. SO, for below situation answer should come ACE.






View 2 Replies View Related

SUMIF If More Than One Condition Is True

Mar 26, 2007

I want to perform a SUMIF if more than 1 condition is true. I can do a regular SUMIF if, for example, values in column A is > than 10,000, then SUM associated values in column F.

However, what if I want a SUMIF if values in column A is > 10,000, values in column B = “Yankees”, then SUM associated values in column F.

View 9 Replies View Related

Popup Window If Condition Is True?

Jul 7, 2014

I have following excel sheet.

IF condition is true then popup message window with Remark of corresponding columns.

Example : if during market time if Google current price fall below 295 then message window will appear SELL : Day support is break.

Script--------------Current Price--------------Trigger Price---------------------Remark
Axis Bank--------------500----------------------502-----------------------Buy : Resistance Break
Google-----------------300---------------------295-----------------------Sell : Day Support Break
HCL--------------------850---------------------865-----------------------Buy : First Sunrise Confirm
INFY------------------3215--------------------3150-----------------------Sell : Weekly Support Break

Current Price will keep moving up / down in live market

if current price > Triger price then popup window should come with BUY & Remark of that row

if current price < Triger price then popup window should come with SELL & remark of that row

View 8 Replies View Related

IF Condition True THEN AVERAGE The Values

Jun 28, 2007

I'm looking for some help. I need a function that can check if each of two seperate values is less than one. If less than one then divide by 2. Then give me the average of these two values. So it could be that it takes 0.5/2=0.25 for one value and 3 for another to give me the average of 1.625.

View 9 Replies View Related

Combine Two Formulas And Add A Condition If True

Jul 23, 2007

I have two formulas that I have worked out to deliver the results independently. I would like to join them together into one formula and add an If condition that if the two match then add a "+" to the end of the string.

#1 finds the base value :

#2 verifies the value is a valid color:

I would like to join the two formulas together and if they match then add a space, " " and a "+" to the end of the string. If there is no match then return the base value.

View 9 Replies View Related

Playing Audible Alarm If Condition Becomes True?

May 12, 2014

Can excel be made to play an alarm if a condition becomes true?

View 5 Replies View Related

If Formula Evaluates To True When Condition Is False

Nov 1, 2006

In E5, put "INSERT". In G5, put the formula


Should I be getting TRUE as the result? I'm getting FALSE. Is something wrong or am I going mad...

View 2 Replies View Related

Copy And Paste Data From One Sheet To Another If Condition Is True?

Sep 17, 2013

I need to copy the row data from sheet1, if the DEPT is HR and paste the same into sheet 2.

data table ( Sheet 1)


View 1 Replies View Related

Copy Data From One Cell To Another If A Blank Condition Is True

Sep 7, 2009

I need to copy the data form Cell "C" to Cell "D" only if Cell "D" is empty

i have been using the following code but it will overwrite cell "D" regardless if data is present or not.

View 8 Replies View Related

Colouring Tabs Dependant On True / False Condition

Feb 21, 2010

I have "borrowed" the below code from a previous solved post, however am unsure how to adapt it.

View 7 Replies View Related

IF Condition Is TRUE Change Cell Value If Not Leave It Unchange

Jul 23, 2013

I've been looking for a way to get the needed result without using macro but i think it can't happen. I'm using excel for forecasting

I need a formula or script to Vlookup a value for me from another sheet if depending on the date.

If the Today date is > then the Date mentioned in Cell A1+15 days i want A2 till A167 to run a formula that would lookup a certain value in another sheet and replace the current value in A2 till A167

For example

A1= August
A2 = 20
A3 = 40 ......

I want when im in 15 August a formula that will replace the foretasted quantity 20 with the real quantity found in sheet 2. If I am not 1 August i don't want the formula to run.

View 1 Replies View Related

Macro To Copy Rows From One Worksheet To Another If Condition Is True

Oct 14, 2006

if there's a macro that can be run to check one worksheet. In this worksheet there is a column where the value should be "true". If this value is true, I'd like to copy the entire row of data into another worksheet.

There can be multiple rows of data where this condition is met.

View 3 Replies View Related

Change Cell Font Type If Condition True

Apr 26, 2008

I would like to know if there is a way to change the font type in a cell, if a condition is true in another cell. e.g font in cell C3 is Arial Rounded MT Bold and if condition is true in cell F3 then font is changed to Arial Narrow.

View 8 Replies View Related

Check Cells In Each Row TRUE/FALSE

Jul 31, 2008

I'm trying to assist is working with sensitive data, and for security reasons I am unable to post the Excel sheet here. Here goes:

The user is working with a sheet in which uses checkboxes, and wants to assign values from cells in the same row as the checkbox to corresponding cells in the sheet (not a different book) if the box is checked.

I guess I should just ask what the best way to accomplish this is? I was thinking I need to do an IF test (do checkboxes return TRUE/FALSE?) and then assign values from the cells I need to corresponding cells in the next sheet. The big question for me using this method: how can I use a single IF statement to assign multiple cell values?

View 3 Replies View Related

Check Four Conditions Return TRUE Or FALSE

Nov 16, 2009

I have several rows with numbers that is either 0, a balance or a text like n/a. I need a formula that return true if all are 0 or contain n/a. If there is one balance shall it be false. Any suggestion? See example:

View 6 Replies View Related

Macro To Check For True Value And Copy To Another Sheet

Oct 28, 2008

I need a macro that would sort out the true value in column A, and paste it to another sheet (range A77)

View 10 Replies View Related

Check If One Of The Option Button Value In Each Group Is True

Mar 1, 2009

I have a 90 optionbuttons on a sheet in groups of three. I need to check to see if one of the option button value in each group is true.

View 9 Replies View Related

Check Font Color And Return A True Or False

Nov 24, 2008

I am looking for a formula to return either True/False in Column J if the font color in Column H is Red.

Is there a formula that can do this?

View 8 Replies View Related

Folder Exist- Check If True W/ Boolean Response

Jan 24, 2007

I have a function that works well for checking if a specified file exist within a specified path. I realized I do not know how to just check if the folder exist!

Example: I want to see if the following folder exist with boolean response...


View 9 Replies View Related

Macro: Check CheckBox Is True, Current Date For Day/Month, Then Sum TextBox & Cell

May 28, 2008

I am trying to allow the Command Button when clicked to go through multiple conditions before making a decision. So, when someone clicks on Command Button 3 the code should look to see if CheckBox1 is true, then it should check today's date, and if it is between a range of days, or even months, then it would add the number in TextBox1 with the amount already in cell H18. This event will happen every time someone clicks on the Command Button.

The end result is to have several sheets (4 total) for each quarter in the fiscal year, and if the dates are within those parameters, the clicking of the command button will update the correct sheet.

View 9 Replies View Related

Check If Condition Is Met

Nov 7, 2006

Private Sub cmdNext_Click()
' Save form contents before changing rows:
' check that it is not the last row - if it is then show message
' and do not go to next record:
If Sheets("Data"). Cells(lCurrentRow, 1).Value = "" Then
MsgBox "This is the last Output."
lCurrentRow = lCurrentRow - 1
Exit Sub ' Abort if no data:
End If...................

I'm having trouble with is the bit where it is supposed to ask for the txtAddInfo to be filled (if blank) and if the txtdifference is greater than 10% or less than -10%. It seems to work fine if the txtDifference is less than -10% but not if the txtDifference is greater than 10%. It just seems to get stuck, the message box is displayed even if txtAddInfo has infomation within it.

I'm not sure why as I use ..........

View 2 Replies View Related

Check For Plus/Minus Condition

May 31, 2007

With out using Conditional Formatting, how can I check a cells value if it can fall within a range of +-.002?

I have this code but it seems to have limitations.

View 12 Replies View Related

Check Delete Condition

Sep 23, 2007

Suppose I have a excel sheet,in this sheet has 7 columns(A to G).I need to do with my sheet with this condition.

-Keep the rows that have the same value of datas in column A,C,G and they must have different datas in column E and F.

-The other row that not same as above condition must be deleted.

View 12 Replies View Related

Prevent Click On Check Box If Condition Met

Oct 20, 2006

I have two check boxes in a worksheet created from the "Forms" toolbar.

Is it possible to prevent a user from clicking these two check boxes if he meet a condition in cell A1.

Eg, If cell A1 value is "Marketing", the user is not able to click on these two boxes.

View 9 Replies View Related

Match Columns To Check If Condition Met

Aug 29, 2007

If you open the attachment.. then you will see that Column A has all the names and Column B has it's Value.. likewise.. Column D has all the names and Column C has it's values...I'm trying to first match the names from Column A to Column D and then see if Column B matches to Column C..

View 8 Replies View Related

Macro To Preset Field With Text If Condition In Another Field Is True

Jun 9, 2006

I have a macro that imports a report. If the Charge Type in column A is BTOREPLX, I need to prefill the field next to it in column B with the text "REPLX", e.g. "REPLXCDROM". I've attached an example of the report.

View 5 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved