The following code doesn't check null condition in Scannedby field. The scannedby has text data type. The code gives me all the data where scandate=20130722 but doesn't check that scanned by can't be blank.
[Code] .....
I have a column formatted as a date. I would like to filter out all rows which have a blank date value. I don't see any blank value to select when I try to select auto-filter for that row. Any suggestions?
I would like to filter out the blank values because I found that if I pivot on the data and there are blank values in the field, I can not use the group option for that field.
I am writing a macro that will allow me to copy all the data in a set range (A2 and below) after checking that B1 contains the text "Year_id".
Right now, I am able to copy all the information, and paste it onto "Sheet 4". I am unable to code for the part where the macro would check for the text. The code that I have (for copying-pasting the date) is below.
Any code that would check the information in B1 into this macro code below:
Code:
Sub Copy_Allinfo()
Dim Sht As Worksheet
Dim Rng As Range
For Each Sht In Sheets
If Sht.Name = "Sheet4" Then
[Code] ........
I'm sure this will be a very simple one for someone - it leaves me *head scratching* though! I have attached a VERY generic example and it includes what I am trying to SUM for the given data. From the example if we look at Question Z1:
"Total Cost of All types of "Lemons"" = ?? I could simply do
I am trying to create a spreadsheet that will have a lot if invoice totals (over 3000) can I scan these invoices and make them so they link to the cell the are refered to in the spreadsheet similar to a comment box?
View 4 Replies View RelatedI have a macro that imports a report. If the Charge Type in column A is BTOREPLX, I need to prefill the field next to it in column B with the text "REPLX", e.g. "REPLXCDROM". I've attached an example of the report.
View 5 Replies View RelatedSo i have a raw data dump that I need to put in a spacific reporting fashion. Excel pivot tables seems to almost do the trick. The problem is the information that I need to drop in the "data" field is text (peoples usernames) and when I drop it in I get numbers instead of names, and when I drill down on the number then I get the exact format I need but only for that line... Any ideas? I am using Excel 2000
If pivot tables will not work does anybody know of another was to get raw data in a mapping type of spreadsheet?
I am struggling with data field in pivot table. Is it not possible to use strings in data field?
Here is a problem :-
Col1-----------Col2-----------Col3
----------------------------------
A 11/1/2007 Y
A 11/2/2007 Y
B 11/1/2007 Y
B 11/2/2007 N
C 11/1/2007 N
C 11/2/2007 Y
D 11/1/2007 N
D 11/2/2007 N
Required op :-
11/1/2007 11/2/2007
A Y Y
B Y N
C N Y
D N N
I used pivot table to generate this output but in a data field I don't get strings; instead it shows 1 in place of Y/N.
In my spreadsheet below I want to be able to enter a sales number for January, the value of cell F2.
I want cells F3 thru F12 to automatically calculate according to the "Growth Per Month" value in cell H1.
Example: If January sales are 20,000, then February should calculate to 21,000 (january * 105%).
Excel Jeanie HTMLSheet1
E F G H 1 2010 Per Month Sales XXX 5% 2 XXX XXX 3 February $ 10,000 4 March $ 5,000 XXX 5 April $ 2,500 6 May $ 1,250 7 June $ 625 8 July $ 313 9 XXX $ 156 10 September $ 78 XXX 11 October XXX 12 November $ 20 XXX 13 December $ 10 14 $ 39,990
Spreadsheet Formulas Cell Formula F3 =F2*10*H1 F4 =F3*10*H1 F5 =F4*10*H1 F6 =F5*10*H1 F7 =F6*10*H1 F8 =F7*10*H1 F9 =F8*10*H1 F10 =F9*10*H1 F11 =F10*10*H1 F12 =F11*10*H1 F13 =F12*10*H1 F14 =SUM(F2:F13)
As shown in the below image. I have some data from A13 to I 13. Currently if I put the cursor on A13 and press DELETE button then all the formatting from A13 to I13 goes off. But the data still remain there.
Is it possible then when I press DELETE the content of A13 then all the data from B13 to I13 should also get deleted ?
Excel Jeanie HTMLSheet2 *ABCDEFGHI13Key FieldEmp 11 2 4 8 5 3 7 Excel tables to the web >> Excel Jeanie HTML 4
I have a large worksheet that has one column that contains cells with either numbers, text or in some cases Nulls. Can anyone help me with some code that would loop through all the cells in this column and when it encounters either text (any text) or a null change the cell value to 0 (Zero).
View 10 Replies View RelatedI have hundreds of records of customer info and I am trying to categorize the job titles so that I can conduct some analysis with a pivot table. My problem is that there is about 20 different ways and variations of "manager" so Instead of autofiltering for "mrg." "Manager" "marketing manager" ect. and then replacing the text manually and using the enter and fill process (to create some standardization to compare "manager" to "director" to "c-level" to "consultant", etc.) and repeating this process over and over again...
I would like to create a VBA that would search the column "job title" for multiple text strings at once and if the text string was true in the cell then the cell would be replaced by a new text string "Manager". I was thinking a series of if functions within one vba but I am not sure if this is possible.
I have a relatively simple, though large, spreadsheet. I get the following in many of my cells: The Error Checking Options button is displayed and the cell itself. is marked with a small green triangle in the upper-left corner. When I click the button, the error type is displayed, followed by the following list of error-checking options:
information specific to the error type
• Show Calculation Steps: demonstrates all steps leading to the error
• Ignore Error: allows you to accept the formula as entered, without Excel displaying the Error Checking Options smart tag
• Edit in Formula Bar: allows you to edit the formula that is generating the error in the Formula Bar
• Error Checking Options: opens the Options dialog box, where you can select the rules governing error checking
• Show Formula Auditing Toolbar: displays the Formula Auditing toolbar
When I check the formula it calculates correctly. What triggers this when there is no error, is there a way to prevent it from appearing in the worksheet?
I have a simple formula ='info page'!b2&'info page'!b5 in places that on my sheet adds a company prefix to a item number, prefix in b2 and item in b5, we have a client that we cant use prefixes but now when I leave the field blank its giving a zero and thats not good either. I'm pretty sure an IFERROR or something will work but can get the syntax right.
View 5 Replies View RelatedI am trying to count the number of times that data is in a field and in any field the date is greaert than today's date. This date field could be blank and that is where I am having the problem.
Example
See Attached
I want to concatenate two Cells into a single cell BUT have the first field left justified and the second cell right adjusted.
A1 = "John Williams", A2= "Single"
A3 = "John Williams Single"
I have lots of rows of text data on sheet 1(Q2:AB139708), on sheet 2 I have a list of text (A2:A44). In sheet 1 I would like to display "1" in cell ap2 if any of the row from (Q2:AB2) contains text from the list on sheet 2(A2:A44), then I would copy this down to 139708.
View 9 Replies View RelatedI have two sheets in my workbook: one holds data (Sheet2), the other processes the data (Sheet1). Sheet2 has temperature data for each hour of every day during the year 1997 - about 9000 rows. Sheet1 averages the temperatures for each day together, and therefore has only 365 rows.
However, some of the data is missing - null values are represented by the value -9999. Sheet1 only averages hourly data if there at least 22 non-null values. If there are fewer than 22 non-null values, a message is written into the cell to indicate such. (See day 119 on Sheet1 in the attached file for an example of this)
I have the formula worked out to this point; however, I'd like to add in one more constraint: if a day has 2 or fewer null values, I still would like to average the data, but omit the null values in the average. (See day 118 on Sheet1 in the attached file for an example of this). My formula so far:
eg.: productlist + order amount + sum
Sheet: Masterdata
Column A: Productname
Column B: Product price
Column C: Product quantity
Column D: Total (=B*C 'obviously)
Sheet: Summary = All rows of Masterdata WHERE Product quantity Is Not Null (<>0) starting from row 5 in the summary sheet. note that if a value in quantity has been reset in the Masterdata, the Summary has to be updated. I do not want to use an advanced filter because the whole workbook needs to act like a portable template for various users which once in a while gets updated using external connection with a ms access database. ( Import of access report). I have no idea whether a copy function or customized pivottable (does not works because too much data), ... would do the trick.
I have an Excel sheet set up with 6 columns: Col A contains a user-entered date.
Cols B-E each contain a drop-down that the user can set to 1 of 4 options.
Col F (I want) to show a date based on Col A & the results of the drop-downs.
The drop-downs contain (in order of importance): "Immediate","Urgent","Routine" and "None". If any of them are set to "Immediate", the date in Col F should be Col A date+2 days, if any set to "Urgent" it should be Col A+14 days, any set to "Routine" it should be Col A+28 days and for None the field can remain empty. I can enter a formula in F2 that checks for B2's drop-down as follows:
how to checking data in 2 column each row, if partial/altogether string is match, shown "ok" otherwise show "check" with data in column a as parameter..
View 3 Replies View RelatedI'm trying to make a game where from a choice of 16 words the contestant has to choose four of those words that, when another word is placed before or after each word it makes a phrase.
e.g From this list of 16 words
albert
bell
[Code]....
choosing bell, bottle, print, stocking can all have BLUE placed before them to make bluebottle, blueprint etc. That would be the correct answer. Choosing their four words would be from a drop down list of all 16 words, separate cell for each list options/chosen answer. bell bottle printstockingCORRECT
There would be 4 rows in total for 4 different answers to be made from the 16 words on offer. I have tried everything to get it to work in the 5th cell but it's difficult.
in my work sheet I need to Hide & Unhide some text box By checking a checkbox it means if user mark the check box the text box will be appear & if uncheck it the text box will be hidden
View 11 Replies View RelatedI am having difficulty trying to solution this:
Row 1 = Dates e.g. 1-Mar - 31-Mar
Row 2 = Day of Week e.g 1-Mar(B1) = Sat(B2) through 31-Mar ending at (AF)
Column A has hourly time intervals
A3 = 0:00
A4 = 1:00 etc to 23:00
Numbers fall into cells by date/day and interval up to today 10-Mar
What I am trying to do at is average the days separated by Weekdays and weekends..so the formula at AG for interval for weekday would be =AVERAGE(D3:H3,K3:O3,R3:V3,Y3:AC3,AF3) weekends (Column AH)would be =AVERAGE(B3:C3,I3:J3,P3:Q3,W3:X3,AD3:AE3)
I want to average the weekdays and weekend numbers without having to group the weekdays and weekends in a custom sort in the final column. That way when I add the data every day, it auto calculates in AG and AH. If I do it as it shows above, the AVG is skewed due to the blank cells.
Attached a sample worksheet.
I have a vba macro written in an excel worksheet (WS1) that reads another excel file (WS2) and retrieves data and writes it into the worksheet with the macro (WS1). It works beauifully except for one little problem. When I send it to a co-worker the numbers part of the data returns null values. I am connecting to (WS2) using ADO connection strings for the spreadsheet and recordset. The only difference I see is that in references of WS1, it shows Microsoft ActiveX Data Objects 2.7 library, it shows 2.8 library on my machine. Also it shows recordset 2.8 library on my coworkers machine, as well as mine.
View 3 Replies View RelatedTrying to write function statement that does the following:
IF cells C9:E14 contain any of the following: "Termination" or "Forms" or "PWE" or "TSA" or "3rd Party", then cell would show "Provided Date (If Applicable):",""
This is my best shot at trying to get it to work, but it wont, no matter what iteration I try.
=COUNT(IF(C9:E14="TERMINATION",IF(C9:E14="FORMS",IF(C9:E14="PWE",IF(C9:E14="TSA",IF(C9:E14="3RD PARTY")))))>0,"PROVIDE DATE (IF APPLICABLE):","")
I'm building a form comprising some text boxes and drop down lists. I'd like for data (once input into the form by the user) to input, upon click of a submit button, into an excel spreadsheet, row by row.
Here's where i'm struggling: I need the form to validate data before submitting. Namley, the form must not allow null values to be submitted and will show a message box telling the user what is needed.
Below is what i've got so far. I've tried playing around with this but am struggling to implement the above functionality:
[Code] ..........
I have a chart that shows up to a list of 28 people and the number of sales for that day. I'm try to make the chart only show the names and number of salesperson that are not = to null. This is what the chart has for values right now "=' Nest Average'!$C$6:$C$33". How can I make it so that it only shows those cells if not = to null.
View 2 Replies View RelatedI have a spreadsheet with approx 12000 rows.8 columns. it represent material in our inventory and each row is a specific records that contains a lot of info. I need to be able to have a field in a top pane (could be top row i guess. or a small form) where i can start typing text and as i am typing, the spreadsheet auto filter the rows to display only whatever fit my parameters i am typing. a few example of what i will type in are:
bearing*2217
valve*gate*3*150
asco*8344
as you may have guess, "*" is a wildcard. The spreadhseet are generated using crystal reports over night, so i am not sure how i can or should use macros or add in for this..
I am trying to check and see if column "A" has a certain number if it does not then keep going and if it does then find wich row in column "A" has that number then in the same row increase column "B" value by 1.
Dim rngPartNumber As Range
Dim Rws As Long
Dim R As Long
Set rngPartNumber = ActiveSheet.Range(Cells(2, 1), Cells(Rows.Count, 1).End(xlUp))
Rws = rngPartNumber.Rows.Count + 1
For R = Rws To 2 Step -1
If Application.WorksheetFunction.CountA(Rows(R)) = compName Then Quantity = Quantity + 1
Next