I am trying to check and see if column "A" has a certain number if it does not then keep going and if it does then find wich row in column "A" has that number then in the same row increase column "B" value by 1.
Dim rngPartNumber As Range
Dim Rws As Long
Dim R As Long
Set rngPartNumber = ActiveSheet.Range(Cells(2, 1), Cells(Rows.Count, 1).End(xlUp))
Rws = rngPartNumber.Rows.Count + 1
For R = Rws To 2 Step -1
If Application.WorksheetFunction.CountA(Rows(R)) = compName Then Quantity = Quantity + 1
Next
I have a custom email creation template I am merging with another version. The problem I am having is wrapping my head around not only selecting a range that is offset from ActiveCell (column 6-9) but seeing if there is an "x" in that range which is normally blank. My previous attempts identify the "x" but adds the text every time it is found. (Each column is a flag for an email bullet and they can have all four bullets in the email where I only want the text included ONCE if they have ANY bullets included). I use the range because I do not want the text included if none of the bullets are used.
Teh StandHTML then gets used in the body of the email like other HTML items I use
The email is generated using the ActiveCell.Offset to insert special text, emails and routing and has weathered alot of changes over time.
Dim Myrange As Range Myrange = Range(ActiveCell.Offset(0, 6), ActiveCell.Offset(0, 9)).Select If Myrange = "x" Then StandHTML = StandHTML & "Important Text" End If
I need to have a single cell tell me (either by returning a certain word or colour) if any cell within a range of cells (a)(all within the same column) contain the same text as another cell thats located somewhere within a different range of cells (b)(again within thesame column).
All it does is step the cursor down 1 cell from where it starts on the worksheet, rather than sorting through the defined range and then selecting the cell I want. I'm not sure why as I've used almost exactly the same code successfully on a different worksheet in the same workbook:
Dim mycheckrng as Range myupdatedate = "04/06/2008" Set mycheckrng = Range("D5:AR5") For Each c In mycheckrng If c.Value = myupdatedate Then c.Select End If Next c mycsdcdateref = ActiveCell ActiveCell.Offset(1, 0).Select
In our program it is essential that only data is entered for the current week.
I need code that if a date is entered into "cell C1",that it will evaluate this value and compare and assure that it is between the dates in Range D1:E1 (upper and lower values)
If it is between these two dates, nothing happens and you can proceed to enter data.
If it is not message -Invalid date entered. Proceed? If "Yes" nothing happens and you can proceed to enter data! If "No", then the value in cell C1 is set to nothing and allows you to enter the correct date.
I need to be allowed to enter an incorrect date at times,to review and check previous entries, 99% of the time it must be between the start and stop date.
I have an Excel sheet set up with 6 columns: Col A contains a user-entered date. Cols B-E each contain a drop-down that the user can set to 1 of 4 options. Col F (I want) to show a date based on Col A & the results of the drop-downs.
The drop-downs contain (in order of importance): "Immediate","Urgent","Routine" and "None". If any of them are set to "Immediate", the date in Col F should be Col A date+2 days, if any set to "Urgent" it should be Col A+14 days, any set to "Routine" it should be Col A+28 days and for None the field can remain empty. I can enter a formula in F2 that checks for B2's drop-down as follows:
I have a list of dates in a column, and am wanting to compare them against today() in cell A1. If any of the dates are in the past, it returns a FALSE, if all of the dates are in the future, it returns a TRUE.
I am trying to build a user form to find out the customers who purchase more than $1,000 during a certain period. The userform has two inputs:
One is to select the data range of customer information. Assume all customer information are in the cell A2: H10, how shall I write the error checking code if the user selects the range which is out of (A2:H10)? message box would be " You selection include invalid data, please check"..
The other input is called " Get data past this data", and I can enter a date in the following cell ( txtDate). Regarding the error checking, I am thinking to use IsDate() function to make sure it is a valid date. Will be there be any other error checking you will recommend?
I have a standard table with quite a few rows. Columns I have are :
Text | Lower number | Higher number
What I would like to do is, in another worksheet, enter a number and I'd like to go through the table and if the entered number is in the range of the Lower and Higher number columns, have the Text displayed.
Using Index Match I can do this if the number matches Lower or Higher number but not if it's between them.
Basically I'm doing a excel spreadsheet where i have a range of cells where we can input some figures or amount. If the cells they indicated exceed a certain amt example: 800, i would want it to show an error msg. I know it maybe sound simple, but have been using the if and countif formula which keep on showing error to me.
Is there a way of checking for duplicates in a range of cells using one cell only for the code? Return does not have to include what value is a duplicate - only true or false. This opposed to using multiple cell and COUNTIF or a pivot table.
I have a user form that writes data to a worksheet (Sheet1)
Is there any way of getting a macro to check what is in "textbox1" against all the entries in column A of "Sheet1"?...........and bring back a message if it already exists?
I'm looking to display a message if data in the active cell is changed. I'm using the code below to check if data in a cell matches certain criteria:
Private Sub Worksheet_Change(ByVal Target As Excel.Range) If Target.Column = 9 Then ThisRow = Target.Row If Target.Value Like "As*" Then MsgBox "Please add a note about why the biology of this species is distinct the Comments column." End If End If
But I have another column where the cells are prefilled with data. This column stores data from a dropdown, such as Critically Endangered, Endangered, Vulnerable etc. I allow the user to change the data in these cells, by selecting an alternative value from the dropdown, but I want to display a message if they change the data in one of these cells.
sheet1 has a list of names. sheet2 has a list of names and some of the names are the same as sheet1. What I want is for the names on sheet1 to indicate (preferably change text colour) if they are on sheet2.
I need to make sure that the two sets of data i have highlighted in yellow and blue are completely the same. Please can some one write a formula that will flag a cell next to the blue column indicating that there is a difference between that of the blue and the yellow columns individual row.
I have a requirements in excel vba to evaluate and check the column data from other workbook. I would like to filter remarks for all "INTRANSIT" from my working file then If the data or tracking# is exist from the source file evaluate if transaction remarks is "Done" or if "Not yet" exist. If remarks from SourceFile is "Done" i will put "RECEIVED" or If "Not yet" i will put "INTRANSIT" in my Working file Remarks column.
The following code doesn't check null condition in Scannedby field. The scannedby has text data type. The code gives me all the data where scandate=20130722 but doesn't check that scanned by can't be blank.
I am writing a macro that will allow me to copy all the data in a set range (A2 and below) after checking that B1 contains the text "Year_id".
Right now, I am able to copy all the information, and paste it onto "Sheet 4". I am unable to code for the part where the macro would check for the text. The code that I have (for copying-pasting the date) is below.
Any code that would check the information in B1 into this macro code below:
Code: Sub Copy_Allinfo()
Dim Sht As Worksheet Dim Rng As Range
For Each Sht In Sheets If Sht.Name = "Sheet4" Then
using a command button to input data back into the spreadsheet at a specific location.
Background: I am building a time clock spreadsheet, of sorts. I have a user form that provides a list of volunteer names in a combobox and then a list of activities they can perform in another combobox. Some activities have Details. (So, VolunteerName Todd can choose Activity Maintenance, which has no details; Volunteer Joe can choose Activity Teaching and then can select Details Intermediate 2.) The volunteer then clicks a SignInCommandButton.
The SignInCommendButton populates a worksheet (VolunteerLog) with the following information:
Column A: Volunteer Name Column B: Today's Date Column H: Exact Time In Column E: Activity Column F: Details, if populated
The SignInCommandButton also copies a formula from cell L2 into the appropriate row of column C (Time In) that rounds the Exact Time In to the nearest 15 minutes. The SignInCommandButton then does a Copy/Paste Special Values to remove the formula from column C and then resets the Userform.
What I need to do:
1) When the person first selects their name from VolunteerNameComboBox, I want to check 3 things:
a) whether the person's name exists in Column A of the VolunteerLog worksheet;
b) if it does, if the Date associated with that entry = Today; and
c) if it does, if the Time Out column is Blank.
If all three conditions are met, I want the ActivityComboBox to populate with the values in Column E and F, if necessary. The user will then click the SignOutCommandButton. (details in a moment)
I already have the code for if the conditions aren't met (Activity box populates and, depending on the selection in the Activity box, the Details box may appear for a selection to be made, or may remain hidden.)
2) The SignOut Button needs to enter the Time into Column I of the appropriate row found in (1) above. It will also need to copy the rounding formula I mentioned earlier, and do the Paste Special, but I have that already.
For (1), I think I have a start. My thinking is to first check if the Name selected in VolunteerNameComboBox is in the VolunteerLog. Each time it shows up, I'd like to add it to a list (range?) called rngSignedInDate. Then I'd loop through all the entries in that range checking if the Date = Today. If it does, then I'd add it to a list called rngSignedOut and loop through those results to see if Column C (Time Out) is blank.
I think I have the first loop, but am stuck on how to populate the results into rngSignedInDate. Here is the code:
Code: Private Sub VolunteerNameComboBox_Change() 'Check if the Volunteer has signed in already Dim strVol As String Dim rngSignedInVol As Range Dim rngSignedInDate As Range Dim rngSignedOut As Range Dim rngSignedInActivity As Range Dim rngSignedInMatch As Range
[code]....
(2) I haven't started working on the SignOutCommandButton. The challenge for me with that is directly tied to the challenge in (1). If someone does pass all 3 tests, I need to have that specific instance defined in a way that I can have the SignOutCommandButton put the time in the appropriate row.
in writing a loop that will check a number of cells to see if it is emtpy, if it is not, then run the macro. If the cells are not empty it will copy the data in that row and paste it to another sheet and delete that line. If it hits a cell that is empty, i want it to skip that row and move on to the next row.
here is the macro that moves the data. Sub movedata()
Range("A1:H1").Select Selection.Copy Sheets("Sheet2").Select ActiveSheet.Paste Sheets("Sheet1").Select Application.CutCopyMode = False Selection.Delete Shift:=xlUp Range("A1").Select Sheets("Sheet2").Select Rows("1:1").Select Selection.Insert Shift:=xlDown Range("A1").Select Sheets("Sheet1").Select End Sub
what i want to do is 1 have a workbook with 3 worksheets. Sheet1 contains the columns:
Reference No. Line Item No. Amount Date 1 3 500 12/01 2 4 900 01/01 Sheet2:
Reference No. Line Item No. Quantity PersonInCharge 1 3 10 Kim 5 6 60 Noel
For sheet 3, what i want to happen is that when i run the VBA macro, it searches through both worksheets (Sheet1 and Sheet2), finding rows that have matching Reference No. AND Line Item No. and combine all of the columns (and values) for that particular row into another row in Sheet 3. So for the above data set, the resulting data in Sheet 3 would be:
Reference No. Line Item No. Amount Date Quanity PersonInCharge 1 3 500 12/01 10 Kim
As this is the only entry in both sheet1 and sheet2 where there is a matching reference and line item no.
So in my excel document I have it such that on the first sheet (Labeled 'Sorted') the data is set up as follows: LOCATION, EXTENSION, NAMEWith the appropriate data under each header. On the second sheet (Labeled 'Locations_Ext') I have a named range called Locations; it contains extensions from a separate document, names of people associated with the extensions from the document, and their locations on the map. I am trying to have it such that the excel matches the extension number given on the first sheet with the ones that I extracted from the document on the second and output the location into the first column on the first sheet. The code I have set up for that process is:
=VLOOKUP(B(//SomeValue),Locations,1,FALSE)
I then want the excel to cross check the information that I took from the Visio to see if the visio is up to date with the latest info we have received (Which is the data on the first page under Extension and Name). The code:
see attached example. I am trying to write an error detection routine that iterates through worksheets that have numeric values for names (ignore text names or alphanumeric). Macro checks range on each numeric worksheet E3:E33 and is supposed to report back on the SummarySheet if any value other than 1 or 0 is found in range E3:E33 on any numeric-name worksheet. Code as follows:
[Code] ....
Problem is that it just reports EVERY worksheet as having an error when clearly most don't (none do I think in the attached example).
Try changing some of ranges E3:E33 to values other than 1 or 0, it still reports all sheets. Why the macro does not evaluate the range E3:E33 properly and just reports every worksheet as having an error?
I am attempting to make a range of cells' data be deleted if a cell outside of that range that had a name in it is no longer there. So if I have a list of names in cells A1:A6 and a range of data in cells D10:E20 that corresponds to a name in cell A2. If the name in A2 is deleted I would want the data in D10:E20 to be deleted.
what will be the code if commandbutton1 is clicked, it will check if the text in the combobox is in the range A2:A10 in the worksheet, if not in the range it will display a message box that the text is not in the range :D
On the attached example i am concatenating surname with the first letter of the forename. However, what i want to add into the formula is if the answer is a duplicate of another answer in a range that these duplicates are changed to surname and full forename.
Is this possible with a formula or would it need a bit of vba programming?
Is there a code in vba, that will return today's date (or the date of the week before, [today-7]) I need a vba code that will check a current cell - let say cell "A1", that contains a date( for exmpel: 12/7/09), and compare this date to the date last week, if the cell (A1)contains a date that is older then last week , then fill in A2 with "False", if the date in A1 is between the date of today and a week ago then fill A2 with "True". (For the exmple that I gave of course in A2 the value will be "False")
