Checking Cell Value Is A Number

Aug 6, 2006

I want to run some macros based on the value of an input cell, but only if the input is a number (ie. it is not a letter or other character).

View 6 Replies


ADVERTISEMENT

Checking Number Of Characters In Cell Macro?

Mar 6, 2009

i have a problem counting the number of characters in each cell in column "A" in a sheet and checking if number of characters in a cell exceeds 5 characters.

View 10 Replies View Related

Checking Number Of Characters In A Cell Macro

Mar 6, 2009

i have a problem counting the number of characters in each cell in column "A" in a sheet and checking if number of characters in a cell exceeds 5 characters.

View 8 Replies View Related

Return 1 Of 2 Cells After Checking Cell For Number

Aug 2, 2008

I have a report that includes data broken up by several headings. Instead of showing the heading and the data below it, I would prefer that the heading was included in every subsequent row that it related to (and the heading be removed).

All the headings are in italic non bold format.
All the data is in standard format (no bold / italics / underline).

The only data in the sheet is as above, and there are no gaps in the data. A heading will relate to all the data directly below it until there is a new heading.

View 8 Replies View Related

IFERROR Or ISNUMBER - Checking Whether Or Not Two Different Cells Contain A Number

Jan 26, 2014

I am checking whether or not two different cells contain a number or the error #NA.

If one of the cells contains a number then the result will be that number.

If both cells contain #NA then the result should be “99”

Example:
Formula in Column C
The values are in columns A and B.
If the value in cell A is a number the result is A.
If the value in cell B is a number the result is B.
If the value in cell A and B equal #NA the result is 99

View 6 Replies View Related

Checking Cell Values And Position On A Row And Setting Summary Value In Another Cell

Apr 8, 2014

I have a tracking sheet that is used to show where a specific project is within the lifecycle and would like to automatically set a summary value depending on the last data entry within a range of cells in a row and also set it to RAG status depending on the value.....

View 2 Replies View Related

Checking Cell Values

Oct 9, 2008

I have a spreadsheet with 2 columns of values. I need to check that the two columns have the same values, however the last digit of the values will differ every time, in the first column the value will always be a 3 and in the 2nd column it will always be a 0. Unfortunately the amount of digits before the last, differs from 6 to 9 so its not as easy to do a trim. Example

Column 1 Column 2
11111113 11111110
222222223 222222220
4444444443 4444444440

I need to check that the first digits (no mater how many) are all the same except the last digit.

View 3 Replies View Related

VBA - Checking If Cell Is Named?

Nov 28, 2011

Programmatically speaking, any way of checking whether an arbitrary cell is part of a named range (that is, short of looping through an entire book's named ranges checking for intersections)? (It can be assumed that all the named ranges consist only of one cell).

View 6 Replies View Related

Checking Value Of A Cell Using Variable

Oct 3, 2013

I am trying to check the cells in column C for a defined set of rows and if it is blank change it to astericks.

Current is the row selected when the macro begins
LastRow is the last row with data (in column A)

For i = Current To LastRow
If Range("C" & i).Value = "" Then Range("C" & i).Value = "***"
Next i

View 6 Replies View Related

VBA - Checking For By How Much A Cell Is Indented

Oct 16, 2013

I am using VBA to indent the values in a range of cells.

However, I would like my code to check if the label has already been indented, to prevent it from being indented further.

View 5 Replies View Related

Checking Date In Cell

Apr 11, 2007

Is there any way through VBA that I can check whether the date in cell A2 is Monday or not.

Also the code should allow me to continue if its Monday else should promt a message saying that its not Monday and whether the user still wants to continue. If no it should terminate if yes the next part of the code should continue.

View 9 Replies View Related

Checking If Cell Value Is True Or False

Mar 27, 2009

I have a cell in Excel having a boolean value and want to use a macro to check if it is true. Something like this:

View 3 Replies View Related

Checking For Blank Cell When Reformatting

Sep 29, 2006

I want to reformat some data, arranged as follows, and ignore blank cells

Date1 Time1 blank Time2
Date2 blank Time3

to
Date1 Time2
Date1 Time2
Date2 Time3

Code being used, currently writes out lines where a Date exists, but Time cell is blank, what do I need to modify in the code below, to ensure blank times are not written out

Sub test()
counter = 2
For i = 1 To Range("A65536").End(xlUp).Row
For j = 2 To Cells(i, 256).End(xlToLeft).Column
Sheets("Sheet2").Cells(counter, 1).Value = Cells(i, 1).Value
Sheets("Sheet2").Cells(counter, 2).Value = Cells(i, j).Value
counter = counter + 1
Next j
Next i
End Sub

View 3 Replies View Related

Checking If A Value Is Present In A Cell If So Changing To The Cell Below

Feb 28, 2007

Problem Designing "new customer" form, a textbox(forename) in the
form has the Control source of "B3" (an empty space in my Customer
database). When the form is run and the forname is typed in the box, it
fair enough appears in the Database sheet (in B3).
However, then when opening the form again and typing over the forename
just inserted it will ofcourse overwrite it (B3 is replaced). Any ideas how i can input
code into the sub linked to the textbox so that it checks the control
source and moves down if the source is empty(code checks B3 for text, moves to B4) then the next one (B4 is checked, moved to B5).

Dim topCel As Range, bottomCel As Range, _
sourceRange As Range, targetRange As Range
Set topCel = Range("B2")
Set bottomCel = Range("B65536").End(xlUp)
If topCel.Row > bottomCel.Row Then End
Set sourceRange = Range(topCel, bottomCel)
Set targetRange = Range("B3")

View 9 Replies View Related

Error Checking With Range Cell In Userform

Jul 29, 2014

I am trying to build a user form to find out the customers who purchase more than $1,000 during a certain period. The userform has two inputs:

One is to select the data range of customer information. Assume all customer information are in the cell A2: H10, how shall I write the error checking code if the user selects the range which is out of (A2:H10)? message box would be " You selection include invalid data, please check"..

The other input is called " Get data past this data", and I can enter a date in the following cell ( txtDate). Regarding the error checking, I am thinking to use IsDate() function to make sure it is a valid date. Will be there be any other error checking you will recommend?

View 1 Replies View Related

Checking Single Cell For Multiple Values

Nov 12, 2013

I'm trying to validate the data entered into a series of cells each cell can contain a different set of data but the value N/A is also permitted. For example:

Cell A1 could contain a date from 2013-01-01 thru 2013-12-01 but the value N/A is also valid
Cell A2 could contain a decimal from 0.01 thru 302502.23 but the value N/A is also valid
Cell A3 could contain an integer from 3 thru to 9000 but the value N/A is also valid

When the acceptable values are entered then I want to be able to carry on otherwise I want to pop up with an error.

View 10 Replies View Related

Checking Two Sheets Cell Contents Against Each Other For Duplications

Mar 23, 2009

I have a master sheet that has 3500ish names on it, and another sheet that I'll need to drop in a list of about 1000 names. What I need on the master is a way to check the dropped in data, find duplicated names, and flag them up.

Now, I believe what I did last time was have a true/false method of telling me if they're on both sheets, then use an IF formula to instead make Trues into "yes" and Falses into "no". However, I can't for the life of me figure out how I had it previously checking both sheets and confirming/denying if they're on both sheets or only appear once.

View 2 Replies View Related

One Cell Checking For Duplicates In Range Of Cells?

Mar 21, 2014

Is there a way of checking for duplicates in a range of cells using one cell only for the code? Return does not have to include what value is a duplicate - only true or false. This opposed to using multiple cell and COUNTIF or a pivot table.

View 5 Replies View Related

Show Tick Or Cross Upon Checking Cell

Jun 2, 2008

i don`t know how to make this in VBA

But please allow me to explain, if I have numbers in Cell F9 I want image to be displayed as (X <---- which it means wrong) on G9 and message to be appear in H9 says only words are allowed. In case, cell value are words; I want it to show image <---- which it means right) and the message to be say correct. And if cell is empty I want it to show image (!) and the cell beside it the message should say (Please Fill up).

I want to apply this to words instead of numbers as well.

View 4 Replies View Related

Macro To Paste Data After Checking Text In Cell

Aug 1, 2012

I am writing a macro that will allow me to copy all the data in a set range (A2 and below) after checking that B1 contains the text "Year_id".

Right now, I am able to copy all the information, and paste it onto "Sheet 4". I am unable to code for the part where the macro would check for the text. The code that I have (for copying-pasting the date) is below.

Any code that would check the information in B1 into this macro code below:

Code:
Sub Copy_Allinfo()

Dim Sht As Worksheet
Dim Rng As Range

For Each Sht In Sheets
If Sht.Name = "Sheet4" Then

[Code] ........

View 7 Replies View Related

Loop Checking And Moving Data If Cell Is Not Empty

Mar 12, 2007

in writing a loop that will check a number of cells to see if it is emtpy, if it is not, then run the macro. If the cells are not empty it will copy the data in that row and paste it to another sheet and delete that line. If it hits a cell that is empty, i want it to skip that row and move on to the next row.

here is the macro that moves the data.
Sub movedata()

Range("A1:H1").Select
Selection.Copy
Sheets("Sheet2").Select
ActiveSheet.Paste
Sheets("Sheet1").Select
Application.CutCopyMode = False
Selection.Delete Shift:=xlUp
Range("A1").Select
Sheets("Sheet2").Select
Rows("1:1").Select
Selection.Insert Shift:=xlDown
Range("A1").Select
Sheets("Sheet1").Select
End Sub

View 9 Replies View Related

Show Number On Sheet1 From Cell On Sheet2 If Cell Next To Cell Containing Number Filled

Aug 13, 2013

SAMPLE FILE "error_finder.xlsx (36.5 KB)" attached...

The VP of our company needs me to create a spreadsheet.

For this s/s I need the following:

Imagine 2 sheets in Excel...

sheet1
sheet2

sheet2 has sequential numbers in column1 starting in row2 with the number 1 until wherever..., so cell A2 has number 1, cell A3 has number 2, etc...

Manually, a user has to fill in certain text next to a number.

This for example would look something like this:

_|A| B
-|-|-----------------------------------|
1| | Error-description
-|-|-----------------------------------|
2|1| Whatever the 1st error would be...|
-|-|-----------------------------------|
3|2| Whatever the 2nd error would be...|
-|-|-----------------------------------|
4|3| Whatever the 3rd error would be...|
-|-|-----------------------------------|
5|4|
-|-|-----------------------------------|
6|5|
-|-|-----------------------------------|
and so on...

All this would be on sheet2

In a cell on sheet1 I now need the number from column A displayed, that has the latest entry in column B.

In the example above this would have to be the number 3 in cell A4, because right next to it (in cell B4) is the last entry "Whatever the third error would be..."

Addition: There are several sheets, each sheet stands for one error listed on sheet1 in column A

sheet1 for example would look like this:

_|____A____|_B_|_C_|_D_|
-|---------|---|---|---|
1|_________|833|933|934|
-|---------|---|---|---|
2| error 1 |___|___|___|
-|---------|---|---|---|
3| error 2 |___|___|___|
-|---------|---|---|---|
4| error 3 |___|___| 3 |
-|---------|---|---|---|

In this example, because "whatever error" (cell B2 to B4 on sheet2) was found on press 934 was the 3rd error (cell A4), the number 3 (cell A4) would have to be populated on sheet1 in cell D4.

View 9 Replies View Related

Checking If A Cell With In A Range Is Presen In Another Range

Oct 1, 2008

I need to have a single cell tell me (either by returning a certain word or colour) if any cell within a range of cells (a)(all within the same column) contain the same text as another cell thats located somewhere within a different range of cells (b)(again within thesame column).

View 2 Replies View Related

Multiply Every Integer Less Than The Number In Cell A1 And Greater Than Zero By The Number Cell In A2..

Feb 5, 2009

Cell A1 = 3
Cell A2 = 4

Is there a formula to calculate
(3*4)+(2*4)+(1*4)

I need to multiply every integer less than the number in cell A1 and greater than zero by the number cell in A2. I was thinking factorial, but that's not it... Can't remember from my math days.

View 3 Replies View Related

Enter Number Into Cell Based On Multiple Of Number In Another Cell

Jul 18, 2013

I have numbers in b2 to b5 say
10
22
35
50

I have numbers in c2 to c5 say
1000
1580
3000
45000

I have numbers in cells d1 to kq1 (1 to 300) d1=1, e1=2, f1=3 and so on

What I want to do is:

In D2 through to kq2 it puts the number in to the cell that correspnds to a multiple of the number in b2.
That would put 1000 in cells m2,w2,ag2,aq2, ba2 and so on
In D3 through to kg3 it it puts the number in to the cell that corresponds to a multiple of the number in b3
that would put 1580 in cells y3,au3,bq3,cm3,di3 and so on

View 2 Replies View Related

Checking

May 25, 2009

what will be the code if commandbutton1 is clicked, it will check if the text in the combobox is in the range A2:A10 in the worksheet, if not in the range it will display a message box that the text is not in the range :D

View 9 Replies View Related

Odd Or Even Checking

May 13, 2006

Did Microsoft do this for a reason. But it seems to me there is no built in formula to check weather a number is odd or even.

=isodd(A1) or =iseven(a1) would be nice.

curent if I have to do something like, which works but is a lot of effort.

=IF(A1/2=INT(A1/2),"Even","Odd")

View 9 Replies View Related

Checking For Duplicates

Oct 15, 2009

On the attached example i am concatenating surname with the first letter of the forename. However, what i want to add into the formula is if the answer is a duplicate of another answer in a range that these duplicates are changed to surname and full forename.

Is this possible with a formula or would it need a bit of vba programming?

View 7 Replies View Related

Vba For Checking Dates

Sep 21, 2009

Is there a code in vba, that will return today's date (or the date of the week before, [today-7]) I need a vba code that will check a current cell - let say cell "A1", that contains a date( for exmpel: 12/7/09), and compare this date to the date last week, if the cell (A1)contains a date that is older then last week , then fill in A2 with "False", if the date in A1 is between the date of today and a week ago then fill A2 with "True". (For the exmple that I gave of course in A2 the value will be "False")

View 2 Replies View Related

Checking If Row Contains Text?

Dec 29, 2013

I have lots of rows of text data on sheet 1(Q2:AB139708), on sheet 2 I have a list of text (A2:A44). In sheet 1 I would like to display "1" in cell ap2 if any of the row from (Q2:AB2) contains text from the list on sheet 2(A2:A44), then I would copy this down to 139708.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved