Copy HTMLTextArea Value Fields Into A Range
Dec 31, 2008Using Excel 2007, how can I copy several HTMLTextArea value fields into a range?
View 9 Replies
ADVERTISEMENT
2007 Copy HTMLTextArea Value Fields Into A Range
Dec 31, 2008Using Excel 2007, how can I copy several HTMLTextArea value fields into a range?
Cross posted:
http://www.mrexcel.com/forum/showthread.php?t=361659
Copy Fields Number Of Times
Dec 18, 2013I have created a userform with 4 textboxes and "ok" button. whenever I press OK I want it to copy TB1(text),TB2(number) and TB3(number) in the first empty row a number of times based on what is in TB4(number). however, each time it has to add 1 to TB2 and whenever (TB2+1) exceeds 5 then 1 is added to TB3 and TB2 start over from 1 again.
View 3 Replies View RelatedFind And Copy Fields From Worksheets
Nov 15, 2006I've attached an example of the .xls file.
There are four data worksheet. Each share a common column data set; ITEM NUMBER. Is there a way to create a macro so that when you enter an ITEM NUMBER into a textbox on the "Output sheet" page, it will automatically gather all rows from all worksheets that is associated with that ITEM NUMBER?
Also, on worksheet 3, the ITEM NUMBERS have an extension that defines the type. Can a wildcard be setup so that it will only match the first six characters of the cell?
Copy Matching Fields Of 2 Sheets
Jan 8, 2008I want to filter data using two sheets. i want only the names in a field that are listed on BOTH sheets. i have a two lists of names and i want only the names that are included in both sheets while still including the rest of their information.
View 4 Replies View RelatedCopy Excel Data To MS Project Fields
Apr 28, 2014Writing a macro in excel where you can use the data in your excel file to copy data to microsoft project.
I have an excel file of task name, deadline, time remaining, and assigned to and I want to copy those 4 columns to a correlating column in project. So basically I would loop through these fields on each line til I reach a blank which could be entering a varied amount of tasks.
The full macro would change ms project start date to today's date then copy the 4 columns from excel to project to add a new task for each line in my file and then save the project file.
I've seen some links on macro with project but most are more advanced then this or are exporting data from project to excel.
Copy Conditionally Highlighted Cells And Their Fields To Another Worksheet?
Jan 26, 2013I'm currently working on a maintenance task sheet for a couple of generators. I have successfully created button macros to input dates. I would like a macro to copy all the cells that are RED (due to a condition rule) plus their associated fields to the left from worksheet "Schedule" to worksheet "Tasks Due". [URL]
Here's the pre-programming flow, I just don't know the code to do it:
Scan worksheet "Schedule" for red cells in following Range
H8:I16,H18:I22,H24:I35,H37:I41,H43:I49,H51:I59,H61:I72,H74:I75,H77:I84,H86:I89,H91:H100
If cell = red Then Copy Row A:I
Insert Row into sheet ("Tasks Due")
If red cell is in worksheet "Schedule" H8:I16 then insert copied cells in worksheet "Tasks Due" one below cell = Fuel System
If red cell is in worksheet "Schedule" H18:I22 then insert copied cells in worksheet "Tasks Due" one below cell = Lubrication System
[Code] .....
If my uploaded workbook doesn't work I've linked screenshots of my document.
Top of "Schedule" worksheet: [URL] .....
Middle of "Schedule" worksheet: [URL] .....
Bottom of "Schedule" worksheet: [URL] .....
"Tasks Due" worksheet: [URL] .....
Select And Copy Multiple Columns Based On 2 Data Fields
Feb 20, 2014I have a spreadsheet with a heap of raw data in it. I need to perform a search based on a customer name, then return certain columns from the raw data IF the customer name is matched in one column, AND a special flag name is matched in a second column. The customer name is always a single entry for the purpose of the query, however the special flag must be checked against a possible list of values in a table. I know this is hard to explain, and I can't add attachments to my posts, so I have created a sample document and placed in in dropbox:
[URL] ........
Compare Multiple Fields For Data Range
Jan 25, 2014I'm doing a study of wind turbines, which are spread over a test field. There are 6 turbines, each checked once a day and produces a value. I look up what the weather man says it should be, "Reported" field.
Compare141622263647
DayWind1Wind2Wind3Wind4Wind5Wind6Reported
2872 6918243519
2867122327303133
2854111324324619
28422232527284624
28319233136454627
282411182841448
2819121622264814
28016242530344549
The "Compare" field values must match all values for each turbine. The speeds identify the location with the best match speed against output of power generated. As each value in "Compared" is the best speed for that type of turbine.
Convert Range Fields To Array Elements
May 2, 2013I have a variable that gets set to an address range:
Code:
TAG_RANGE = Sheets(BAL_SHT_TAB_NAME).Range("A1", Sheets(BAL_SHT_TAB_NAME).Cells(Rows.Count, Range("A1").Column).End(xlUp)).Address
In the first loop that executes this command TAG_RANGE gets set to $A$1:$A$39
I want to loop through the values in that range and run tests against them. Is there a function that will take the values in the address range an convert them into an array so that I can use something like this:
Code:
For Counter = LBound(TAG_RANGE_ARRAY) To UBound(TAG_RANGE_ARRAY)
[run tests]
Next
Or is there someother direct way to do this other than creating a loop that fills the array element by element
Excel 2007 :: Find Text In A Range Of Fields - Case Insensitive
Mar 2, 2012I am trying to find a way to see if a range of cells contain (not exactly, just contains) the text in another cell.
For example:
A1 Fred Flintsonte 2012 B1 Barney Rubble C1 Barney Rubble
A2 Barney Rubble 2012
If a cell in range A1:A2 contains text in B1 (CASE INSENSITIVE), then C1 equals B1
I've tried entering this formula in C1, but it does not work:
=IF(ISNUMBER(SEARCH(B1,A1:A2)), B1, "")
Convert Column Data Fields To Row Data Fields In Pivot Table
Feb 8, 2014CountryHourDataTotalData
Austria - A10Sum of SeiA51CountryHourSum of SeiASum of SeiT
Sum of SeiT4.88Austria - A10514.88
1Sum of SeiA561562.83
[Code]....
left side pivot created in vb 6.0 & right side pivot table created manually in excel.
i want to generated pivot table using vb 6.0 same as right side pivot.
Set PRange = ws1.Range("R1:Y" & finalrow)
Set PTCache = wb.PivotCaches.Add(SourceType:=xlDatabase, SourceData:=PRange)
Set PT = PTCache.CreatePivotTable(TableDestination:=ws2.Cells(1, 1),
[Code]....
Fill In The 3 Criteria Fields, Calculate The Result, Copy The Result, And Place It Into The Correct Place On The Table
Oct 19, 2006I have a macro that imputs data from an external database and puts it into a temporary worksheet. This data has 3 columns (ID, Date, Amount). I am then making another sheet which has X number of tables (one for each ID), with the years being the column headings, and months being the row headings. ie.
| ID X
| +------+------+------+--->
| | 1999 | 2000 | 2001 |
+------+------+------+------+--->
| Jan | $100 | $250 | $300 |
+------+------+------+------+--->
| Feb | $200 | $300 | $200 |
+------+------+------+------+--->
| Mar | $300 | $250 | $100 |
+------+------+------+------+--->
| Sum | $600 | $800 | $600 |
| +------+------+------+--->
| ID Y
| +------+------+------+--->
| | 1999 | 2000 | 2001 |
+------+------+------+------+--->
| Jan | $100 | $250 | $300 |
+------+------+------+------+--->
| Feb | $200 | $300 | $200 |
+------+------+------+------+--->
| Mar | $300 | $250 | $100 |
+------+------+------+------+--->
| Sum | $600 | $800 | $600 |
| +------+------+------+--->
Currently I have a few hidden fields for the DSUM Criteria. I start making the tables. And then filling in table based off of the month and year. Doing so I need 3 criteria:
>= First Day of the Month
<= Last Day of the Month
= ID #
The problem is it takes Excel too long to fill in the 3 criteria fields, calculate the result, copy the result, and place it into the correct place on the table. Is there another way to get this data into the correct tables faster? Instead of using DSUM?
Select Range To Copy, Find Values And Copy
Feb 2, 2010I have a base document that i can import another data document with a button (this is working).
I then have another WS ("search") in the base document with lots of identifiers which I want to use as my search range to look through the document that I just imported (column A).
I need a msg to ask the user what month they would like to find the $ value on (Ie, January) in the imported WS... this way it doesnt copy the entire line only cell in the selected month column.
Then I want to the user to be able to click a button that will check through the identifiers on the "search" WS and if the same identifier appears in the imported WS in column A, then for the $ value in the column selected to be copied to the search Range work sheet.
If the idenfifier is not matched then in place of the $ value copied can be the string "no in XXX WS" .
I have attached the document with dummy data in each work sheet with details more cleary what I have meantion above.
Copy Variable Range & Copy Formulas From Destination
Mar 2, 2008I tried searching for code for each part of the task separately and trying to piece together multiple macros, that did something similar, but I’m not have a lot of luck, so I’ll break it down into two treads, I hope this will follow the rule of one question per post, but if I should have separated this request even farther as two treads, please let me know and I’ll be happy to comply.
I was given a spread sheet with a macro that loads data from a SQL Data base (not mine), it returns anywhere from one row to 100’s of rows data. Since it’s not my spread sheet and macro, I copied this sheet to my destination workbook. The Data loads in 7 columns starting in B4:H4, with the column headings titles: Acct#, Id#, Name, Qtr1 Totals, Qtr2 Totals, Qtr3 Totals, and Qtr4 Totals. Data cells in spreadsheet not formatted (general)
What I’m trying to do:
part 1:
I need a macro to copy the data only for columns Id# thru Qtr4 Totals (C5:H5 down thru the last row with data) to another sheet. The destination sheet range starts with rows B13:G13, with formulas below and to the right in columns H13, and J13:N13
(column I is blank).
The formulas below the range are a subtotal of the copied columns (D:G). They could be remove and totaled after they’re copied, so there's nothing below the copied range? Since I need the column totals as a subtotals, my thought was to have the row heading and formulas already on the destinations sheet and just insert a blank rows between as each row was copied?
part 2:
As each row of data is copied from the source sheet, I need the macro to copy the formulas to the right of the copied range (H13, and J13:N13) on the destination sheet down for each new row of data copied from the source sheet
Sheet1 Row Range Copy To Sheet2 Firs Blank Row In Same Range Paste As Text?
Mar 16, 2013Trying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
Application.inputbox: Range To Copy And Paste The Range's Link And Format To A Different Sheet
Oct 7, 2009Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
View 2 Replies View RelatedFind Matched Value In A Range For Named Cell Then Copy Range Cells Below
Aug 6, 2013I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
Search Range In One Sheet - If Any Cell In Range Is Greater Then 0 Copy That Row
Sep 24, 2013Basically I have three sheets. MAIN, Sheet 1 and Sheet 2
Sheet 1 and 2 are in the same format
A3 down is a list of country names and then B3:I71 contains the data im interested in.
I've been trying to create a function that looks at B3:i71 to see if any cell in that range contains a value greater then $0.00. If it does then the row that contains the cell with a value greater then $0.00 (between col A to K) should be copied to sheet MAIN from cells B3 down. This should ultimatley produce a list of data for any row containing a value greater then $0.00. This process should then be repeated on Sheet 2 and should join the list below sheet 1.
Copy Multi Cell Range To Destination Workbook Range
Dec 23, 2008Trying to copy a range from Sender.xls (sheet) Lists backstage
onto Userform.xls (sheet) Behind the Scenes
When trying to copy the values within a multicell range, the destination cell range (same size) becomes blank.
Copy/Paste Range(s) Without Activating/selecting Range(s)
Oct 2, 2008To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
View 5 Replies View RelatedCopy Immediate Range, Paste To Another Sheet & Name Pasted Range
Feb 19, 2008I have been struggling for a while to copy data from one worksheet to another and reset the target range.
The copy bit is cool, the range resetting bit is not. I have tried various methods, but none seem to work.
For example, the below code generates an error: "Compile error: Argument not optional"
I have stuck the particular command button script below to let you see what I am trying to do:
Private Sub cmbFilter_Click()
Dim sCriteria As String
On Error Resume Next
Copy/Paste Range To Different Size/Shape Range
Mar 3, 2008I have the following code that let's the user choose and " import" data to an existing sheet. It works well up until now. The problem is that the three ranges that I am trying to copy the data from on workbook to another has changed size. In previous version of my workbooks the range was two columns by 10 rows. Now, it is 1 column by 10 rows. So, when I run this macro it doesn't work because the two ranges are different. Is there any way to:
1) Only copy over one of the rows of a range thus making the macro run?
2) Do not run that part of the macro if there is an error?
Thanks so much for reading this long-winded description but the error is a big problem
Private Sub CommandButton1_Click()
Import_Data_Form.Hide
Run "UnProtectAll"
Set b = Selection
ad = b.Address
' Local Variables
Dim wkbDataFile As Workbook
Loan Processing-Copy Range From 1 Sheet To Same Range On Another
Jun 22, 2008I'm developing a loan processing system for members of a club. When an applicant asks for a loan, the club will calculate 10 % of that interest and the applicant will have to pay it back in 5 successive fortnightly instalments. If he asks for a loan in the first fortnight (1), for example, he will have to start paying instalments in fortnights 2,3,4,5,6 to pay it all back.
The system currently has 4 worksheets. The first sheet is a the loan application form. The cells outlined in thicker border, are the cells in which details must be input. Once it is input, the data will be automatically placed in the Processing worksheet using IF and VLookup functions (See spreadsheet attached), which is used as a basis for the loan schedule Worksheet. What I need is a macro that will copy the range filled in the Processing worksheet, and copy it to the exact same location in the Loan schedule worksheet (The cells with the same fortnight columns and the same member name. This is how the loans are to be filed.
Alternative To Copy Range Paste Range?
Feb 24, 2013im currently using a Code that copies a visible range from one workbook and pastes that Range to another workbook. I dont like it though because every time it pastes the screen jumps.
I tried setting Range 1 = Range 2, its not giving me an error but its not "pasting" the information to the 2nd workbook.
I know ive done it before by doing each cell in each row individually but a its a big Data Table and that would take too long.
Copy Picture Of Range And Name Range Pasted To?
Apr 8, 2008What is the proper syntax for working with a Range with to name it after the PasteSpecial command? The Selection approach I am trying here does not seem to work unless I am currently within the same workbook.
[URL]
VB:
Sub Create_Dashboards()
With Sheets("Revenue Model") 'Strat Plan Revenue
.Range("J2:S9").CopyPicture
.Range("A42").PasteSpecial
Selection.Formula = Range("J2:s9").Address
Selection.Name = "Strat Plan"
'more code here
End With
End Sub
Copy Range Of Series By Finding / Ref Of Range?
Aug 5, 2014I have attached xl sheet for ref.
I have value in E2(5),F2(10)=G2(5[sub of F2-E2])
I need to find E2(5) value in B2:B21 and the same of F2 also
After finding that
(eg): E2 value 5 present in B6 cell and it should come to c6 cell same of F2 also
Now It should select C6 to C11 cells.(ref of B6 to B11,ie,5 to 10)
I tried in vba and formuals but i couldnt find solution.
Copy A Range And Paste It Over A Variable Range
Jul 16, 2009I am using the code below to copy a range and paste it over a variable range.
View 4 Replies View RelatedCopy Range Of Cells Over A Filtered Range
Jan 8, 2008I wonder - is there a way to copy the green range over the filtered cells in col. C !? (I want to Copy range D20:D23 on to cells: C5, C9, C13, C17). I tried to select "Visible Cells Only" as the target for Pasting onto (using [F5] etc...) but no success. I prefer a solution that does not involve VBA. *** see attached picture.
View 2 Replies View RelatedCopy Range If Cells Have Same Values As Another Range
Mar 19, 20081. I have two workbooks (eg. workbook1 and workbook2)
2. I compare the cell values in workbook1.sheet1.cell range (d6:d20) and workbook1.sheet2.cell range (d6:d20).
3. If the values in the range of cells are same, I want to take the value in workbook1.sheet2.cell range (d6:d20) and copy to workbook2.sheet1.cell range (d6:d20).
