I want to filter data using two sheets. i want only the names in a field that are listed on BOTH sheets. i have a two lists of names and i want only the names that are included in both sheets while still including the rest of their information.
View 4 RepliesI am trying to find a way of comparing entries in one spreadsheet to another spreadsheet and generating a third sheet of those that do not match.
As an example, I have a spreadsheet of approved supplyers, with name, reference and date in each column, and a speadsheet of used supplyers, some with references and some without. I want to compare the supplyers used to the approved supplyers list by reference number (which are in the same format), and produce a third sheet listing all those that do NOT match e.g. unapproved supplyers.
I need to make sure that the third spreadsheet only lists each seperate supplyer once, even though they may have been used several times, AND it must also include supplyers without a reference number.
I will use this to compare many spreadsheets with the same data, but of varying length and would like to use a macro to perform this function.
Does anybody have a code snippet to search and compare 2 sheets.
I want to read the value in a cell on the first sheet, then search the entire second sheet for a match, if it does match then copy the value from certain cells on the second sheet to the row on the first.
I have found the following code on this forum that has really worked well. This code matches the first two columns of two worksheets and inputs them into a third worksheet. But I need to be able to copy up to five more columns, a total of seven columns and have it input into the third worksheet. I am not sure what it means "For Each c In Sht1Rng". look at the code and advise me of what I need to do.
Sub FindMatches()
Dim Sht1Rng As Range
Dim Sht2Rng As Range
Set Sht1Rng = Worksheets("Data1").Range("A1", Worksheets("Data1").Range("A65536").End(xlUp))
Set Sht2Rng = Worksheets("Data2").Range("A1", Worksheets("Data2").Range("A65536").End(xlUp))
For Each c In Sht1Rng
Set d = Sht2Rng. Find(c.Value, LookIn:=xlValues)
If Not d Is Nothing Then
Worksheets("Results").Range("A65536").End(xlUp).Offset(1, 0).Value = c.Value
Worksheets("Results").Range("A65536").End(xlUp).Offset(0, 1).Value = c.Offset(0, 1).Value
Set d = Nothing
End If
Next c
End Sub
I have a template with a sheet dated the 1st of the month "Feb 1" Cell 2 also had the same date.
I'd like a VBA to copy this sheet, change the sheet names to Feb 2, Feb 3, etc, and also change cell 2 to the same name...
I've seen similar code to copy sheets and change name, but can't figure out with the date...
A pop up asking for the number of new sheets would also be useful.
ExcelForumSample.xls
I have a list of company names and I need to find the duplicates. Of course pivot table finds the exact matches, but how do I find duplicates when only 1 character is off. Like punctuation or "s" or a mistype of a single character?
Example:
Jo Blo inc
Jo Blo inc.
Jo Blo inc
Jo Blo icn
Joe Blo inc
Jo Blo inc
I have two worksheets. Each have a common value in two cells. An ID and a currency amount. One worksheet also has a payment date. I need a worksheet that combines the two, along with the payment date.
View 3 Replies View RelatedI have a column where a lot of the fields match. What I want to do is set up a formula where all of the matching fields are numbered (1,2,3,etc). For instance:.......
I want the numbering to read the matching items and count them (not a sum but rather just a numbering/ordering column)
This is what I would want it to look like:...........
Example:
Order Number from VendorOrder Number from SupplierTracking Number from Supplier12345123451ZABCD13456134561ZBCDE134561ZCDEF14567145671ZDEFG1456714567
In these three orders, the first order nubmer has a 1-to-1 relationship with a single tracking number. In the second, there are two different tracking numbers associated with one number from column A. In the third, there is only one tracking number but three different lines of the same order number that need to be updated with it.
The question is, is there a way to line up data fields head to head even when there are variable inputs like this?
colA colB
ABC 123
ABC 456
ABC 789
ABC 789
ABC 789
I Need to write a VBA that will make a selection based on a couple conditions. example: if 123 is in the range of ABC and 789 is as well, i need it to select or change the color of the rows that 789 is present
The order of column A can not change as I need to find the matching row of information and transfer that information
Not all values have a matching row.
Rows are match on PCN number but need all the values in the rows
I have attached a workbook with starting and desired end results
I have a large list like this:
A 1
B 2
C 3
D 4
E 5
I need only values pertaining to C and D. How do I sort the columns so it becomes like:
C 3
D 4
The rest I don't need.
I've been racking my puny brain for an hour trying to figure this out. Basically, my problem is with the last 2 invoices listed. If one invoice has "PO CLOSED" on it, I want all other invoices on that same PO to say the same thing. Surely I can do this with a formula or conditional formatting, but I cannot think of how.
PO #Invoice #DateInvoice TotalDept.ActivityElementPO AmountPO Amount RemainingPO Status0707955289651/12/09$812.9075105854035$2,960.28$59.380707955459806/15/09$667.2475105854035$2,960.28$59.380707956486827/7/09$812.9075105854035$2,960.28$59.380707955584669/29/09$607.8675105854035$2,960.28$59.380719750913336/18/09$947.7975105853305$5,000.00$3,117.210719750915917/17/09$935.0075105853305$5,000.00$3,117.21PO CLOSED
I need a formula. Probably Vlookup. I'm having a LOT of trouble trying to figure out how to "phrase" the formula so let me explain what it is I'm trying to do. If a cell in Sheet 1 Column AS and a cell in Sheet 2 Column B match exactly, I want the cell in Sheet 2 Column C that is in the same row as the matched cell in Sheet 2 Column B to be copied into Sheet 1 Column BB in the same row as the matched cell in Sheet 1 Column AS.
For example, if cells in S1 Column AS and S2 Column B both have the name "LOS ANGELES" then "KLAX" will be copied from cell in S2 Column C (in same row as "LOS ANGELES") to S1 Column BB (in same row as "LOS ANGELES").
I have two worksheet "ABX" and "ACX" from which I want to find the matching data for specific columns B, D and E only.
Matching data will be in sheet "Match" and vice versa.
Data are present dynamically.
I have pivot tables in diff pages
im trying to make a button to reset all the fields in all the pivot tables..
i tried recording a macro to do this but it only works for page fields..
it wont work for the column fields.. act, adopt and check are page fields at the top... region is a column field ... goto_AQcheck is a macro to switch to that sheet which is assigned to another button....
this isthe code it gave:
My requirement is to match 2 columns of two different sheets. I know about Vlookup for exact matching but here I neeed to do partial matching.
For Example: Sheet1 Company Name= Opera Technologies
Sheet1 Address= 104/Main Street
Sheet2 Company Name= Opera
Output should be like this in different column: Opera, 104/Main Street
I have 2 sheets with lots of data in them. On the first sheet in the A column i have data that looks like this: 01234567 On the second sheet in the D column i have data that looks like this: 1234567 It's basically the same data except without the 0 in front. The first sheet has like 60k rows and the second sheet has around 18k rows. I need to find out what data from the second sheet is in the first one. I'm attaching an example.
View 2 Replies View RelatedIf I have a list (in sheet 1) of names listed in column "a" and numbers listed in column "b" and the same thing (on sheet 2) and I want to run a macro that takes the data from (sheets 1 and 2) and lists the matching names in column "a" (in sheet 3) and the number associated with the name (in sheet 1) in column b and the number from (sheet 2) in column c
View 2 Replies View RelatedI'm trying to store a value in ColumnA Row1 Sheet1 in a variable and check to see that value exists in Sheet2. If the value is in Sheet2, I want to copy the information in Row1 Sheet1 and paste it in the row of the matching value in Sheet2. I need to then check the value in ColumnA Row2 Sheet1 and check again for it in Sheet2 and I need to continue to do this until the data ends in Sheet1.
Code:
Dim x As String
Dim y As String
A = 2
B = 2
[Code]...
The above is the code I've been trying to use. It has two flaws:
It won't let me copy into the row of Sheet2 (not a big deal though)The rows get all mismatched and it doesn't actually search ALL the rows in Sheet2 so it misses some of the values that actually DO match (the big issue) I've racked my brain for hours trying to figure it out using the above method and I think I've reached the point where I'm overthinking it way too much. I also found the "Find" method but I couldn't quite teach myself how to use it.
I am trying to combine the data in two sheets.
In Row A sheet one, I have "name" In Row A sheet two, I also have "name"
If row A sheet two matches the data in row A sheet one, I want the corresponding data in row D sheet two to move to row E sheet one.
I have two majors (classes) listed on two differents sheets and need to put the matching classes on a third sheet.
View 3 Replies View RelatedI have created a userform with 4 textboxes and "ok" button. whenever I press OK I want it to copy TB1(text),TB2(number) and TB3(number) in the first empty row a number of times based on what is in TB4(number). however, each time it has to add 1 to TB2 and whenever (TB2+1) exceeds 5 then 1 is added to TB3 and TB2 start over from 1 again.
View 3 Replies View RelatedUsing Excel 2007, how can I copy several HTMLTextArea value fields into a range?
View 9 Replies View RelatedI've attached an example of the .xls file.
There are four data worksheet. Each share a common column data set; ITEM NUMBER. Is there a way to create a macro so that when you enter an ITEM NUMBER into a textbox on the "Output sheet" page, it will automatically gather all rows from all worksheets that is associated with that ITEM NUMBER?
Also, on worksheet 3, the ITEM NUMBERS have an extension that defines the type. Can a wildcard be setup so that it will only match the first six characters of the cell?
is it possible to provide a formula to match as per the uploaded file. Data in Sheet one columns A and B, compared to what is in Sheet two column A I have a lot of data, and only need a Y for yes, and N for No as a result.
View 3 Replies View RelatedI have a spreadsheet where I have two different sheets; a summary sheet, and a more detailed sheet that lists out items on invoices.
The summary sheet shows invoice number, amount invoiced, and total paid against that invoice.
The detailed sheet goes into more details, and shows whats on the invoice, and any reasons for them not being paid.
I want a formula on the summary sheet that picks up the invoice number from the details sheet, and then brings through the figures. The details sheet may have more than one line for an invoice number, so the formula needs to be able to add up too.
I've tried a vlookup, but it doesnt seem to work, and I dont think it will do what I want.
I have two sheets with a Unique ID that I'd like to match and generate a third sheet. The third sheet would consist of First Name, Last Name, ID number where the phone numbers match from between sheets.
Sheet 1: A = Fname, B = Lname, C = Phone
Sheet 2: A = message, B = Phone
I'd like to make a Sheet 3: A = Fname, B= Lname, C = Phone, D = Message
Is my only option to try and get on a PC and use MS Access? Never had to do this in Excel before.
I have in Sheet 1 a list of product codes (that should be only numbers, i.e: 1010) on column A, product description on B and a sales column on C.
On Sheet 2 I have on column A I have in the same cell a letter "C" the product code and the product description(i.e.: C1010 Onions). On column B I got the sales total. ( I dont care about the letter "C" it can be deleted)
I would like to use a VBA code to find the same product codes between sheet 1 & 2 and copy the sales total from sheet 2 to sheet 1 when the product code is the same.
I have one workbook in that 6 sheets have.
Here I want match the total one sheet to another but each sheet there is no fixed ranges so that I have confused.
How to find out Each sheet total and match each other.