I have the catalog #s of some products in column A, and I have the brand in column B, Product name in Column C, and the model # in Column D. I want to create a formula that if I select the catalog # it should autopopulate the brand in column B, product name in column C and the model # in column D!!
And I have the brand/product & model # in a different sheet!!
The file is attached here. I would like to be able to autopopulate cells based on a dropdown. The first tab has the final report and the other 2 tabs are the raw files.
KMPH_Inventory.xlsx
I have a dropdown list selection on the form for types of machines. The list of machines, their sizes and related noise level are in a chart on worksheet 2 and I'd like to automate the form so that when the machine is selected, the related noise level auto populates.
The dropdown box has been put in the form using the data validation function.
I am currently building a sheet that requires a drop down box that will auto-populate two separate fields. I have tried to the point of being suicidal to make this work but to no avail.
A detailed explanation:
The worksheet containing the drop down list and fields that need to auto-populate.
sheet example.png
The raw data, located on a separate tab in the same workbook. (Note: there are over 1500 rows of data)
sheet example 2.png
The drop down box will be in the "Description" column and will contain a list of services my company provides. Once selected it will auto-populate the "Rate" column and the "Item ID" column. The raw data that the list is pulling from is located on a separate tab.
I can make the list just fine, it's easy enough to just go to the Data Validation feature and point to where you want the list and where you want the data to come from, but getting the list to pull the data from different columns and go into the columns on the work sheet is apparently beyond my knowledge of excel. I figured it would just be a simple formula setup through the VLOOKUP formula wizard but I've tried it at least 20 different ways, all of which fail. I've tried HLOOKUP too but it also failed.
Looking to create a calendar in excel and auto-populate the content with specific fields I enter. I know how to create an excel gantt chart but I'm really looking for a calendar view instead of a series of columns with dates. I reviewed the original post on Auto-Populating Excel Calendar but was confused by the instructions. (1) create a calendar in excel and (2) show me how to populate the calendar with fields like (dept and project name) into the dates on the calendar? I have two dates that are important (a due date for the project and when that project will be published). Is there a way to have both dates show info otherwise the most important date will be the publish date?
View 1 Replies View RelatedI am trying to auto generate a calendar based on two drop down menus - Month and Year.
Once the month and year is selected I want to import all work orders onto the calendar based first on the "Labor Name" found in the list of work tab, then assign each work order for that labor name to the respective date on the calendar for the month.
August PM Schedule Demo.xlsx
Every time a name is selected in column C12:C15, I need that respective row to populate with $10 in column J. When column C12:C15 is blank, I need that respective row to read $0 in cloumn J. It's either one (10) or the other (0).
There are rows above and below it as well that have nothing to do with this, so the formula/function would be specific to just this subset of rows (rows 12-15).
I get close, but can't seem to nail this simple formula/function down. I am unable to download any sheets due to my work's firewall.
I am looking to auto generate a roster/schedule. I have a spreadsheet with shifts for each weekday that I need to populate every week with names to pick from a drop down list. the drop down list is made using data validation and looks at a dynamic named range to allow me to select only the people who are available to work a certain shift.
Is there a way to do this using vba?
I have 3 dropdown boxes I created using the control toolbox which pull corresponding information from 3 different columns. I would like to be able to format them so that upon data entry in the first dropdown box, the subsequent two boxes auto populate with the corresponding data. Currently I have to select the information for each dropdown box manually.
View 6 Replies View RelatedIf I make a selection using a drop down, can I have it auto populate another cell with information associated only to the made selection? For instance, if I select January from drop down in A1, I want it to auto populate B1 with 100.
View 2 Replies View RelatedHow to populate MTD data linked to the other spreadsheet file (monthly data) to the table on the left, depending on the month selected month from the dropdown list.
Attached files for reference :
Dropdown Month.xlsx
MONTHLY DATA.xlsx
I have two worksheet. One worksheet is a form where in the Field Door No. should be a dropdown list. The list will be retrieve from worksheet Source. Now upon selecting a specific Door No. it should also autopopulate the respective Type, Brand, Serial No., and Type.
First thing i need to know is what should i do on Cell B1 worksheet Form for it to be a drop down list retrieving the Column A on worksheet Source.
Second, upon selecting for example ATC0009 on the drop-down, it should auto-populate like these
Door No. ATC0009
Type AT Crane
Brand A
Serial 43679
Type Crane
I've been racking my puny brain for an hour trying to figure this out. Basically, my problem is with the last 2 invoices listed. If one invoice has "PO CLOSED" on it, I want all other invoices on that same PO to say the same thing. Surely I can do this with a formula or conditional formatting, but I cannot think of how.
PO #Invoice #DateInvoice TotalDept.ActivityElementPO AmountPO Amount RemainingPO Status0707955289651/12/09$812.9075105854035$2,960.28$59.380707955459806/15/09$667.2475105854035$2,960.28$59.380707956486827/7/09$812.9075105854035$2,960.28$59.380707955584669/29/09$607.8675105854035$2,960.28$59.380719750913336/18/09$947.7975105853305$5,000.00$3,117.210719750915917/17/09$935.0075105853305$5,000.00$3,117.21PO CLOSED
I'm trying to make a spreadsheet that can be used to easily build a collective list of steps, for a user to read and follow line-by-line.
I want a source sheet of "steps" that I can change over time, and the resulting tabs that reference the source sheet get updated/populated automatically.
I've pieced together some VBA code from other sources, which kind of does what I want it to:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Row > 1 And Target.Column = 1 Then
Dim SourceSheet As Worksheet
Set SourceSheet = ActiveWorkbook.Sheets("Steps")
Dim TargetSheet As Worksheet
Set TargetSheet = Target.Worksheet
Dim c As Integer
Dim Source As Range
[Code]...
But there are some problems:
1) The data auto-populates into a row. It would read better if each step was in the same column, meaning rows would need to be automatically added upon selecting something from the drop-down list. The number of rows that need to be added vary based on the number of steps in the source sheet, for the selection made from the drop-down list.
2) If you make a change to the source sheet, my goal is to have the other sheets referencing the source sheet's lists of steps update automatically, so you only need to update the steps in one spot and everything you've built from them gets updated instantly. Currently, you must select a different choice from the drop-down list, and then change it back, before it populates the "new" steps from the source sheet.
This is my first time using VBA.
What I have so far is attached: testAutoPopulate.xlsm
I'm making a Excel 2013 spreadsheet that has formula in a column that auto enters a number 1-40 when something is entered to the left of that cell. There are 300 rows in the spreadsheet. I would like to make a drop down list in a column cell to the right that would delete that number in that cell from the drop down list. For example cell C1 has 39, that 39 then is deleted from the drop down list. C2 has 22 in it, click on the drop down list cell and it shows 1-40 less 39 and 22.
View 11 Replies View Relatedi have been trying to write an Excel sheet in 2007
that can be given a random amount of (money) and show
me the best way to spend it.
Weapons:
Name - Power - Cost
1 - 10 - 20
2 - 20 - 40
3 - 40 - 80
4 - 80 - 160
5 - 160 - 320
6 - 320 - 640
So i have 40K to spend, i want to eneter 40000 into a box and it
will auto populate the number of units i can buy, always setting the weapon
#6 as the priority.
I have two or more fields of data, where parts of them are auto populated based on inputs from elsewhere. That part i have working fine, however the problem arises in taking that information and displaying it as a Bill of Materials list on another tab in my excel file. I want to take the information, and only display it in the BOM tab if that piece of information is being used (ie item count field not being 0). I know how to do that part in a rather simple format, however i'd prefer to make it so that when i have the list, and a certain item isn't used then its not included in the BOM, and an empty space is not left behind. I would prefer this to be all be done automatically by a formula if possible instead of just having to resort to sorting the table every time the tool is being used.
Is this even possible in excel, A quick example doc is attached, shows 2 example fields. i'd like to take the information from those 2 fields. and somehow create a single list, with a single heading along the top, with all row containing a 0 "Unit Count" to be omitted entirely from the list, and not have a blank space where the item should be. Keep in mind these fields may be greater than 2, and may not be position one after the other in a strait down line.
Example.xlsx
i have two fields with dates - one field A1 for date authorised (for a data request) and one field B1 for date actioned (data request)
i need a formula to populate in C1 the following:
if A1 is blank then C1 is 'not actioned'
if B1 is blank then C1 is 'not complete'
if both contain dates then C1 to calculate the number of working days between the dates eg. A1 10.08.09, B1 11.08.09...C1 = 1 working day
I have a list of staff in cell A1 in a drop down list. In cell A2, I would like Excel to populate automatically the branch from which the staff is from when I choose the staff name in cell A1.
View 3 Replies View RelatedI found many examples on this forum of how one can pull in data from closed workbooks, or copy it and have it stored in the active sheet. So far so good, but I need a solution which would do the opposite - I need the macro to take a range of data form the active sheet store it in a closed workbook and save any changes in the target workbook without opening it.
View 2 Replies View RelatedI've been trying to get a table to populate based on a couple of criteria. However, I've not come-up with the solution yet.
I have my dropdown selections in cells C2 & C3. The objective is to populate the table below the dropdown with data from the sheet named (very unimaginatively) 'Data'. Currently you see the selection AA-11 & Mar-14 in the Contract ID & Month cells. If I change this, the table below should auto-populate.
I've attempted using Vlookup, Index-Match. But it does not give me the desired result.
Also, the number of Products can change each month (although the file shows 4 for each month & each Account).
I have an excel sheet with data where I have column A index number, B company name, c empty, d data , e with item.
[Code] ......
What I trying to do is I made a dropdown for company list and i select comp1 then i want to populate items list with out duplicates .
I need a formula that can automatically populate yearly quarters in separate columns based on a number of years. So if I put in 5 years - excel would populate 20 columns with Quarter 1 - Quarter 2 and so on. If I then change it to 3 years it would only populate 12 columns.
View 4 Replies View RelatedFor example, I have a master sheet that has a drop-down list of the months January and February, which have their own sheets. I am trying to populate the sales of the week 1, 2 ,3 ,4 in the master sheet based on the same data for the month chosen.
View 2 Replies View RelatedHow to populate data between 2 linked file based on the Dropdown Validations?
View 10 Replies View RelatedI am trying to use VLOOKUP to auto-populate a description from an entered part number. After checking up on how to do this in several different places I applied this formula to the relevant cell but all that it returns is #N/A.
I am very confused as all seems to be correct, but I am new to this and I am sure I am missing something silly. :P
On entering a part number into cell C13 on sheet 'Stores Receipt' it should search and find that number in column A on sheet 'Product List', it should then return the adjacent description from column B on sheet 'Product List' and show this in cell C17 on sheet 'Stores Receipt'.... Sounds simple hey! :D
The formula used is:
[URL]....When I select a name in column B, it populates column C's dropdown with that name's list of units. When I select a unity type in column C, I'd like it to automatically populate column E in the same row with the value associated with that unit. The values associated with a particular unit can be found to the right of the sheet. So if in row 2 I select Blake in column B, then Unit 5 in column C, I'd like column E to be populated with 14.
Edit: using Excel 2007.
I attached stripped down version of the sheet which is small enough to post. None of the things I removed should affect the topic at hand. The full sheet is available at rapidshare.
I have a single registration sheet that lists names, contact information, and the class someone is in on a single sheet.
(Name, Number, Email, Class 1, Class 2)
I am hoping to automatically populate other sheets in my work book based on classes... essentially making automatically populated rosters. For example, everyone who has Math listed in either Class 1 or Class 2 would have their entire row (with contact information, etc) copied to the "Math" sheet.
I have data in three columns
A B C
4.5 9.50 4.657
4.5 11.60 4.789
4.5 12.50 4.654
4.5 13.50 3.930
4.5 15.20 3.826
I need to be able to auto-populate the cell in column G based on values in columns A & B. If I type 4.5 in E2, and 13.50 in F2, G2 should auto-populate with the value from column C
E F G
4.5 13.50
I am after a VBA code that I can use to populate a fax template based on criteria's
Basically I have records which are being logged throughout the day via a User form and sometimes there may/maynot be a charge. the user decides at the time. The column is named "to be charged" and is filled with either Yes/ No.
I need to be able to select the date to print or Just the same day date and print all faxes' that have "Yes" for charge This way all the information for each fax is populated and the user can just print.
and if possible mark a Colum non the master sheet as printed with a X or something
