b2 = a2 * 150
c2 = a2 * 145
d2 = a2 * 140
e2 = a2 * 135
[Code].....
in the first row i want to use the fill handle at 135 and drag rightwards so as to copy/retain the pattern (decrementing by 5, from multiplier 150 until 100)
how would I achieve that?
p.s I also want the formula for columns to work with the fill handle drag downwards.
Pre-requisite: I would consider myself to be very poor with excel, based on what I've read on this forum and found on my web-searches. I have a worksheet that has a list of data on the left going vertically, then a summary of this data going horizontally across the top. It is not arranged in such a way that transposing the data will do what I want. I am pulling the 5th word out of the title of each block of the vertical data and need to show this word on the horizontal section.
When I use this formula to pull the 5th word: =MID(MID(MID(SUBSTITUTE(A2," ","^",4),1,256), FIND("^",SUBSTITUTE(A2," ","^",4)),256),2,FIND(" ",MID(MID(SUBSTITUTE(A2," ","^",4),1,256),FIND("^",SUBSTITUTE(A2," ","^",4)),256))-2)
I need to increase A2 to A30, then A58 (up by 28 every time) in every instance in that formula. The fill handle increases the values by 1, instead of 28 (even if I do 3 or 4 instances manually) How do I do this? I've run into this problem in other scenarios, and there HAS to be a way to get around it.
I have a percent value in cell E3, for example, then other numbers in cells H3through AA3. The formula is for all numbers in cells H3 through AA3 to be multiplied by the percent value in cell E3.
When I try to copy the formula entered in cell H3 to the rest of the cells across the same row, it does not copy as I would like. Instead of having all cells multiply cell E3, it will progress through each next cell. How can I format all cells I choose in row 3 to multiply the same cell, E3?
What I want is to be able to change the percent value in E3, for instance, and have all other cells automatically change values according to the percent they are multiplying in cell E3. I have about 160 rows I want to do this same thing in.
Is there anyway to automatically fill the empty added cell after inserting a row without using the fill handle? For example, for a series of numbers: [URL]
2. Drag the fill handle Selected cell with fill handle across the range that you want to fill.
Or running balance: [URL]
2. Extend the running balance formula into the new rows by selecting the last cell in the balance column and then double-clicking the fill handle.
I began to ponder a way to copy down cells so that the copying of the formulas results in references as shifting horizontally instead of vertically. One particular reason that this occurred to me had to do with my attempting to use Excel to make more orderly text copied from Adobe.
So, for example, if I copied text from Adobe, I would paste it in Excel. Thirty lines of text would past vertically into a column, from Row A1 to Row A30, with each line of text in its own row. I wanted to figure out a way so that in adjacent columns, I could put it so that I would have a set of formulas reading in =A1 in Column C cell/row 1, =A2 in Column D cell 1, =A3 in Column E cell/row 1, =A4 in Column F cell/row 1, =A5 in Column G cell/row 1, and so forth. I realized that if I copied this down, in the second row, the result would entail references to A2, A3, A4, A5, A6. I would prefer that the references update to A6, A7, A8, A9, and A10.
How can I fill downwards the following formula?
=(SUM(B$2:B13)*0.05)*(J2/12)
=(SUM(B$2:B12)*0.05)*(J3/12)
=(SUM(B$2:B11)*0.05)*(J4/12)
I can't seem to get the fill handle "+" sign to give the correct amounts when
I want to copy a formula down a column. It seems to skip every 2nd row with
the wrong amount or sometimes it will give a 0.00 sign.
I have a function =TimeSinceIns(3) in cell K3. Where the 3 represents the row number. I would like to fill the function all the way down to cell k100. And be able to do this reguarly. Unfortunately when I use the fill handle it leaves 3 as 3 when I want it to be changing to the appropriate row no. Ie in cell k4 would be =TimeSinceIns(4) and so on.
View 3 Replies View RelatedI would like to use the Fill Handle to create a column of dates.
The dates must be formatted like this: DD/MM/YYYY HH:MM
The Fill Handle completes the series, but not the way I want.
I want a series that changes the day only. So:
02/02/2012 09:00
03/02/2012 09:00
04/02/2012 09:00
For whatever reason, Excel currently adds a minute or two to the minutes and does not increase the date.
13/2/2012 09:20
14/2/2012 09:20
15/2/2012 09:20
13/2/2012 09:21
[Code] .......
When I have a text field, such as 123 Main Street, Suite 456 and I copy it down, I get
123 Main Street, Suite 456
123 Main Street, Suite 457
123 Main Street, Suite 458
What is this feature called, and how do I turn it off?
I am trying to copy a countif formula down a column using the fill handle, but when I copy the formatting down the column the range changes. Is there a way to make it so that only the variable changes and the range stays the same?
View 2 Replies View RelatedI am comparing two years' data, one on top of the other (Rows 1 and 2). For each cell in each row, I am referencing a cell from a different tab. This needs to be done with about 290 data items, so 580 rows.
When I attempt to copy the two rows down, it doesn't go in the correct order (skips a cell reference number). It looks like this:
Excel Forum Q.xlsx
It would save me a lot of time considering each of the 580 rows has about 30 different column with each cell referencing various things.
how to fill right or down cells when the pattern is correlative....but how can I fill the cells to the right when the pattern is not correlative ??? I need to have a differnt pattern when I fill right...as in the picture. This is, I need it move 4 columns on each cell.
View 4 Replies View RelatedI've created a macro to disable cut-copy-paste and drag-and-drop (below), but when the user exits Excel, the drag-and-drop option remains turned off.
The user has to click on the Office button, go to Excel Options, Advanced tab, and re-enable the fill handle manually. How can I have my macro do this automatically when the workbook is closed?
'*** In a standard module ***
Option Explicit
Sub ToggleCutCopyAndPaste(Allow As Boolean)
'Activate/deactivate cut, copy, paste and pastespecial menu items
Call EnableMenuItem(21, Allow) ' cut
Call EnableMenuItem(19, Allow) ' copy
Call EnableMenuItem(22, Allow) ' paste
Call EnableMenuItem(755, Allow) ' pastespecial
'Activate/deactivate drag and drop ability
Application.CellDragAndDrop = Allow
'Activate/deactivate cut, copy, paste and pastespecial shortcut keys
With Application
Select Case Allow
Case Is = False ....................................
Attached is a sample worksheet. I have data in column A that I want to drag fill in column C. In column C, once the first 2 results in column A are entered, I would like a blank cell and so on.
testdv.xlsx
I have a file where comments are used for some cells. The user does not insert any text into these comments fields, but uses the comments feature to display pictures.
A picture is used for the fill pattern of the cell (inserted through fill effects) and that picture is what is displayed when someone moves the mouse over the cell.
The "fill pattern picture" becomes part of the excel file and my question is how can I extract this picture and use it somewhere else.
dear friend in my document column "L" has some numbers & formulas.if any cell has formula base in that i need to inset rows below that formula cell & that formula need to spread on that new rows.i have 4 type of formulas.each formula has (1.5).that part is common. it 's like this...
(01.)ex- L1 cell =150*2*1.5 ,need to inset one row below this cell & after running the macro it should change like this..
L1 cell =150*1.5
L2 cell =150*1.5
(02.)ex- L1 cell =150*2*1.5+50*1.5 ,need to inset two rows below this cell & after running the macro it should change like this..
L1 cell =150*1.5
L2 cell =150*1.5
L3 cell =50*1.5
(03.)ex- L1 cell =150*2*1.5+130*3*1.5 ,need to inset four rows below this cell & after running the macro it should change like this..
L1 cell =150*1.5
L2 cell =150*1.5
L3 cell =130*1.5
L4 cell =130*1.5
L5 cell =130*1.5
(04.)ex- L1 cell =150*2*1.5+130*3*1.5+20*1.5 ,need to inset five rows below this cell & after running the macro it should change like this..
L1 cell =150*1.5
L2 cell =150*1.5
L3 cell =130*1.5
L4 cell =130*1.5
L5 cell =130*1.5
L6 cell =20*1.5
I have over 300 rows with a username in the column A followed by 3 fields in the following columns B,C,D. I want to just sort all 300 rows alphabetically by column B,C,D.
Eg. Cormac, Santa, Atlas, Egg
After search Cormac, Altas, Egg, Santa.
how to do this easily in Excel without VB as I am not good as it.
I have 63,893 rows and 3 columns (Parents, Component and Qty) in a table. This would be typical for a Bill of Materials showing the Qty of Components in a Parent. A lot of Components are common to a mumber of Parents.
In total I have 4,259 Parents and 10,904 Components making up this 63,893 rows in my table.
The problem is that neither the Pivot function in Excel nor Access will handle it, least not the way I'm doing it - the bog standard way ! I just get the "Excel cannot complet this task with available resourses......" message.
Anyone any ideas how to get a Pivot or something resembling one so that I end up with the Components as the Row Header and the Parents as Column Headers.
I know I could go in and manipulate the data but I want to be able to create this Pivot like report every month or so without having to reinvent the wheel each time.
I have data in columns E through J under the headings of Monday-Saturday (E is Monday, F is Tuesday...J is Saturday). Then out to the left of the data, in column A, I have the week ending date (using Sunday as the last day of the week) which corresponds to the data under each day. There are multiple rows with different week endings but all the data is under columns E-J with the week endings in column A. So for instance, on row 13 the week ending in column A is 12/22/2013 (a Sunday) which means the corresponding data in the same row under columns E-J (the Mon-Sat columns) belong to 12/16/2013 (the Monday in the week ending on 12/22/2013), 12/17/2013 (the Tuesday in that week), 12/18/2013...and so on and so forth until 12/21/2013 which is Saturday in the week ending of 12/22/2013. Lastly, out to the right starting in column N and going horizontally out to column FD (will go out further as more days are added) I have the specific dates by day, it starts with 12/16/2013 and goes on incriminating by 1 day at a time until the end of all the dates included in the data (which at this point so happens to be 5/11/2014).
What I need done now is to take all the data which currently sits in columns E-J (the Monday-Saturday columns) and copy and paste it out under the correct specific date column that it belongs to starting in column N (going all the way out to FD) based on the week ending in column A. So with row 13 since the week ending in column A is 12/22/2013 the data in columns E-J needs to get pasted to row 13 columns N-S, then the same thing for row 14, except the week ending in column A row 14 is 1/5/2014 so the data in columns E-J row 14 needs to get pasted to columns AB-AG (AB is 12/30/2013...and AG is 1/4/2014). Below is the loop I came up with that accomplishes this, but for the reasons already stated.
Code:
Sub newtest()
Sheet2.Unprotect
Dim drd As Long
Dim rrd As Long
drd = 13
rrd = 14
Do Until IsEmpty(Cells(drd, 1).Value)
[Code] ..........
I have a spreadsheet with a summary tab and 30 data tabs. The data tabs are named page-1 to page-30. In the summary page I have the following formula in cell C39: 'page-1'!C20
I want to be able to drag horizontally across 30 cells and have it increment to 'page-2'!C20, 'page-3'!C20 etc.,
and also drag it vertically and have it increment to 'page-1'!C21, 'page-2'!C22 etc.
I have a comma delimited CSV file that holds about 2 millions rows of data (a lot I know but it's the only format I can work with unfortunately). One of the rows has some numbers in it that have lots of decimal places (like 3.908651901). I need to round that entire column - all 2 million rows - to whole integers.
The problem is that when I open it in excel it says something like "only 1 million rows shown". After more investigation I have found out that excel cannot handle more than 1 millions rows at a time.
My question is this: If I select the whole column and round the numbers to integers will that apply to the entire 2 millions rows? Or only the 1 million showing in excel?
Are there any other programs available that can handle 2-2.5 million rows and change the column to whole integers?
I have a formula that is averaging seven (one week) consecutive cells, I want to Copy/Fill the formula down the worksheet for the entire year. Is there a way to use the fill handle to drag down and make the formulas use the next seven colums?
I have removed the $ from the row numbers in the original formula, but when I use the fill handle it fills like this:
=average(B2:B8)
=average(B3:B9)
I would like it to fill like this:
=average(B2:B8)
=average(B9:B15)
I have some formulas that combine template text and values from cells in that row to result in text that I then Copy and use in another place. I am trying to convert that to a Macro.
My Skills are Novice -- I have searched Google and Tutorials and it seems that my usage is not common so, I have not found answers to help me move ahead.
I'm working with a simplified version of what I want to do to eastablish a
Working model that I can modify and expand. I had a macro that ran to completion but I abandoned it. I realized that I was on a Wrong Track. It was created from recorded macro sections and googled routines and very clumsy.
Heres my Scenario
If my Excel Cells were
Cell A1 = 135252
Cell B1 = $13.95
Cell C1 = 3
Cell D1 = Oversize
I want to run a Macro from E1 that would Result in text of
Our Stock Number is 135252 - The Price is $13.95.
We have 3 in stock. Type of Packaging is Oversize
being left in Cell E1.
I would like the Macro be able to run on other rows as well when launched from Cell E of that row.
My Goal would be to make the macro work on a range of rows by Highlighing Cell E in those rows.
My Excel Formula to accomplish the same thing is -
="Our Stock Number is "&A1&" - The Price is "&B1&".
We have "&C1&" in stock. Type of Packaging is "&D1&"."
If I could get this much working, I think I can expand and edit to encompass my actual application.
Would need your expertise to advice on how to create a formula to handle the following data in order to produce the desired output below.
I have some data in Sheet 1 and the corresponding data in Sheet2. The output is in Output Sheet.
If the data in Sheet1, "Student1" match the data in Sheet2, "Student1", then it will copy all the entries for Student1 in other worksheet with the header "Student1" (Output Sheet).
The same thing goes to other Student in the list. For this sample, I only provide a short list of data in Sheet2, it can be long, more than 5 students.
Sheet1
------------
Student1 | Student2 | Student3 | Student4 | Student5
Sheet2
------------
Student2 | Student5 | Student3 | Student4 | Student1
aaa | aaa | fff | aaa | aaa
ddd | fff | ccc | ccc | bbb
eee | ccc | ccc | ddd | ccc
ccc | ddd | ddd | eee | ddd
eee | eee | eee | bbb | eee
bbb | bbb | aaa | fff | fff..................
Im working on a financial forecast in ecxel and I'm trying to drag a formula from left to right, while referencing horizontal cells from a different tab:
Specifically, I have created a "loan schedule" which shows 12 monthly interest payments starting in cell B46 and ending in cell B57.
In a separate tab labelled "Balance Sheet", I would like to show the first interest payment ('loan schedule'!B46) in cell C28. Next, I would like to select the cell and drag it to the right so that the remaining 11 interest payments will be transferred into D29, E29, F29 etc. Unfortunately,the spreadsheet doesn't reference to the vertically listed interest payments from the loan schedule but instead references the cell to the right of the interest payment. Using "$" seems to be of no support.
Macro or formula to build a table from a data.
The data is in the following format in 4 columns: A (Customers' names), B(type of transactions: invoice,payment, Credit,Check), C (date), D(Amount).
Data is for the whole year by monthly.
I would like to build a table like this:
Column (A) 10 names of customers and in next 12 columns by month amounts and types of transactions.
I have created a macro with the below formula in it:
Range("L2").Select
ActiveCell.FormulaR1C1 = "=LEN(RC[-1])"
Range("L2").Select
Selection.AutoFill Destination:=Range("L2:L234")
Range("L2:L234").Select
I am using column K and it looks up the length of this cell. When I created the formula I was using info that only went to line 234 which was fine. Once I clear the info in column K and input new info it can go further than line 234. How do I get the macro to look up the whole of column k without having to create a new macro each time?
I am trying to fill in reference cells horizontally but fix the column and increasing the row number as it fills. For examples I want to start my refence as "=A1" in cell B1. I want to copy this reference horizontally to column Z1 but want the refences to be A1, A2,...,A26. Excel only seems to increase columns when filling horizontally and rows when filling vertically. Transpose works but it's an array which would slow the spreadsheet down.
View 4 Replies View RelatedIn a worksheet I retrieve data from a SQL query. Now I have to add 5 different calculations per row and each calculation will be stored in a new cell (so 5 columns will be created)
I want to do this with a loop macro and calculate this till the last "filled" row. The number of rows differs every month.
What loop code should I use and can somebody give me an example of the VBA code.
Note that some formulas contains nested If-functions.