Using the dcount function it appears that the criteria is not exact. I have typed in ="IP" but instead of getting only IP. I'm getting cells beginning with IP, eg IPp and IPe. When I use countif I don't get this problem.
View 3 RepliesI have created a register that gives the ages of the participants being registered. I need to figure out the number of boys and girls of different age groups. I used the formula =DCOUNT(database,column no,criteria) with criteria having two columns, Gender & Date of Birth. Under Gender was M, Under Date of Birth was >=01/03/2002 [dd/mm/yyyy]. This gave perfect results shwing me the number of boys less than 12 years old. However, wishing to make the formula dynamic I changed it to >=EDATE(TODAY(),-144) which is exactly twelve years ago. This formula gives wrong results and I can't understand why.
View 9 Replies View RelatedI am trying to use the DCOUNT function to count based on two different criteria in adjacent columns is this applicable.
Situation:
I have column B that contains initials and I have column C that contains a type (of store) so it'd look like this
jp RET
jp RTO
jb RET
ma RTO
Rn CI
ma Fur
tc CI
ma RET
jp RET
and I want to have a count of how many RET's there are for Initials JP ect
I am new to VBA and am having difficulties in getting a find function to successfully locate search criteria within cell. When the search criteria matches exactly that of the cell contents then the code works; however should the search criteria only form part of the total cell contents (such as a seach for "the" in a cell containing "the cat sat on the mat") the code doesn't recognise it.
Essentially, I need the code to search a range for the required string and if found within a cell activate that cell and populate a combobox with the full cell contents of the activecell.offset(0,-2).
The relevant section of code attached below:
Dim role_count as range
Dim role as string
If Application.WorksheetFunction.CountIf(Range("Role_Count"), Role) 0 Then
Range("role_count").Select
Selection.Find(What:=Role, After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Activate
Me.Controls(ComboBoxName) = ActiveCell.Offset(0, -2).Value
I have a sheet called 'frontsheet' where users complete a number of fields and a second sheet called 'table'
When the frontsheet is complete, users press a button to submit the data to the table, it checks the fields are complete and submits the data - all this works fine.
However I would like to add a mechanism to check the first entered piece of data (asset number) against all the asset numbers already entered on the 'table' sheet.
I thought I could use a dcount to do this but after trying a multitude of methods I get the same error "sub or function not defined"
Code:
Private Sub CommandButton1_Click()
'Dim ta As Worksheet
'Set ta = Worksheets("Table")
'Dim fs As Worksheet
'Set fs = Worksheets("Frontsheet")
[Code] ........
As you can see I've tried a few ways and have a few 'remmed'* out lines. I'm starting to suspect the problem lies elsewhere, should I have the dcount happen without the need to click a button and how would I do that?
i'm trying to write a summary page for the data collect on the first sheet and would like to find a way of counting the number of records within certain date criteria (those that are more than 30 days old). now the crucial part is that the records have a second set of critical data, their Status, and i need to find only the records that have a particular status (in this example that is Pending and Open).
if you look at the second sheet you'll see that i can find records that are associated with a specific date, but not with a range of dates; which is particularly annoying because DCOUNT can find ranges of information when using other types of number.
OK, I have a list of sales that my semester long company has sold. In the midst of these sales we are sellling a versoin of the bumble watches. people can either buy a watch, (which includes a face and a band) a face, or a band.
So I have this giant list and only like 10 watches on there. I need a formula that will count how many watches and faces we sell.
I was initially thinking something along the lines of:
=COUNT(OR('Sales Journal'!D:D="Watch",'Sales Journal'!D:D="Face"))
=COUNT(OR('Sales Journal'!D:D="Watch",'Sales Journal'!D:D="Band"))
Which worked great until I had more than one watch in there.
I can't figure out dcount, and don't know if it's even the right thing to use in this instance. If you want I can post the sales journal..
I am using Excel 2010.I have a Advanced Filter that has removed 2 list, with 3 criterias, List ( or DB1 ) is based off 1 item " Pay type ( hourly / Salary )" , then the 2nd List is based off 2 Criteria's Job type , and Less than a number, I am able to do the filter just fine, but i am requried to DCOUNT theses.
here are the ranges for the Default Table: A6:H45 (without headers)
List1 is in J6:Q27
List2 is in J33:Q37
*Both are without headers also*
I am asked to "DCOUNT"
List 1 based (A6:H45,"Type",L30)
List 2 based (A6:H45,"Job Type"+"Salary(has to be
I need a formula that acts very much like a DCOUNT formula. However, I need to count the numbers of instances where "09007" is in Column A IF the value in Column B is greater than zero OR if the value in Column C is geater than zero.
I would prefer a formula that can calculate this with only the existing data. In other words, I don't want to have to add additional columns with formulas to help get me to the results.
This is probably so simple for an Excel wiz, but I've drawn a blank.
I have a 2-axis table, with the formula =DCOUNTA(Data,"Function",B15:C16) in the top left intersect cell. Data range is the table of info, which has location and function column. Location has values UK and Ukraine.............yes, you've guessed it, the UK row of the table returns both UK and Ukraine numbers.
The criteria range B15:c16 has Function and Location as headings and blanks underneath. The data table references B16 and c16 as the row and column variables.
How can you modify the criteria or table formula not to use starting-with criteria but exact matches ? (probably have to use another formula besides an array version of dcounta, right ?)
I'm trying to use the MATCH function. I want to locate an exact name. I used the formula:
=MATCH(A6,A3:A10,0). This is the name cell I want to retrieve, the column in which the information is found, and 0 for the exact match. The return answer I get is 4.
Is there any formula that could calculate total average number of recruitment days (i'ts one number), but only for "Diana" and "Skipper" (excluding "Jennifer")?
Please see an example:
Recruitment daysResponsible
12Diana
13Diana
19Diana
16Skipper
23Jennifer
[Code] .....
I guess it has something to do with AVG and IF formulas.
I'm trying to figure out a function that allows to me to determine the exact month when I will breakeven. For example, my total net income for the 2 quarters of the year is 1050 and my investment is 500. If I have an income in Jan of 300, 300 in Feb, and 200 in March, then the function will spit out Feb as the breakeven month.
Please see attachment. Exact year to see when I breakeven.xlsx
I have a workbook with many many sheets in it. The first sheet contains a single column with about 10,000 different values. I'd like to use each of these as search criteria against ALL data in the other sheets (of which there are a good 50 or so). If matches are found (they don't have to be exact case), then I'd like two things to happen:
1. The rows containing the matched search criteria in the first sheet are highlighted.
2. In the cells adjacent to the search criteria in the first sheet, hyperlinks to the matched data are created and named after the sheet upon which this matched data appears.
I've attached a sample file to this post with ideal sample 'answers' to queries made of the first 2 terms.
I'm trying to do a Dcount (=DCOUNT($A$1:$M$229,Q$2,P14:V15))is there a way to do it without have to repeat the Criteria over and over?
Data Sample:StatePkg MeatCustomer #CT1MAMENHNJNYRIVT
Criteria Sample:StatePkg MeatCTHaveStatePkg MeatMAHave
I'm working on the following
Workbooks.Open Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-" & Ucase(Format(DateAdd("y", 0, Date)), "YYYY-MM-DD")&".XLS"
ChDir "D:CommondataIBMmain"
ActiveWorkbook.SaveAs Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-NAFTA.XLS", _
FileFormat:=xlNormal, Password:="", WriteResPassword:="", _
ReadOnlyRecommended:=False, CreateBackup:=False
ActiveWindow.Close
Date: 2009-06-03
What I'm trying too do is open a file, make an exact copy and save it under a new file name.
My problem is in the date formula the day is not always the same. In the sample case it's 03 at other times the day will change.
is there a way too get this too work irregardles of what the day might be?
I am trying to count unique records only in a column, if another criteria in another column is met. I got the Dcount to work by iteself, but I need to drive down the results more.
This is what I have:
=IF($G$2:$G$300="Q 000",DCOUNTA($D$2:$D$300,1,$K$2:$K$3),0)
The result I get is zero. In $K$3 I have =COUNTIF($D$2:D2,D2)=1).
I'm trying to return a count of specific text values in a named array using DCOUNT, and for some reason it's not working when it seems like it should. It's probably something simple that I'm overlooking.
DCOUNT works fine for numbers, but when I search for a text string as a criteria, even though it is entered as ="=textstringhere" DCOUNT does not return the correct count. COUNTIF returns the total count of all matching text strings in the array, but that's not what I'm after.
I've attached a sample workbook : DCOUNT.xls
I'm not sure if using the Dcount formula is the right one in my example below, but I can't get it to work. Here is my data:
A
B
C
D
E
F
G
H
1
ThrFriSatSunMon TueWedThr2
2030101512
I'm looking for a formula that would count the number of Weekdays with data in it. So the answer would be 3. As I enter data into column F, G, H, etc. the count would go up and would always skip "Sat" and "Sun".
I have a large transactions table with 10 columns and more than 7,000 rows. One of the columns names the country in which the transaction has taken place (array named "country")
Another names the year of the transaction (array named "year")
And a third one holds the transaction value. (array named "value")
What I would like to do is to sum the transaction value of one country for one specific year? I.e. what was the aggregate transaction value for transactions in Sweden in 2005?
I run a countifs against a column of data, and can easily test for specific concrete criteria in other columns, but I want to run a function on the value in a column as a criteria.
For example,
countifs(data Name, "=Technical", data count, ">4")
is great.
But I want to check for some function on another column, e.g. "data number, square(x)<100", I cannot reference the indexed data value in the (data number) column as the "x" in the formula.
What I really want to do (!) is to test if a field is (not) in a list of matches, e.g.
..., data tag, NOT(ISERROR(MATCH(???,GoodValues))),
Where I can see if the tag for an entry is in a list ("GoodValues") defined elsewhere.
I was doing this task using sorting then adding column today morning one of my friend told i can do it with formula only, no need to using sort and adding new column
I just attached the sheet : without sorting.xlsx
I am stuck trying to add another criteria to an existing formula.
On my sheet "Data" i have the following formula in column AF2
=IF(Z2="","A",Z2-AE2)
If Z2 (Payment Date) is Blank then return "A" in AF2, however if Payment Date has an actual date in the cell then minus AE2 (Received Date) from the Payment date.
This gives me the "Receipt to Pay" number E.g. 6 days from receiving to paying an invoice.
I now need to add another criteria to this and i cant fathom it.
I need to do the following:
If Payment Date (Z1) is Blank and Invoice Status (T2) is "Loaded" then Minus Received Date (AE2) from Todays Date, while also retaining the last part of original Formula Z2-AE2 if the first criteria is not met.
(I have put =TODAY() in Cell AG1 for ease).
What do i need to do to add this into the formula. Do i need to use IFS function?
Criteria:
U4= 12/01/2013
Data:
(A) (B) (C)
01/01/2013 02/01/2013 12/01/2013
1 3 4
2 2 1
4 1 1
Result:
Small - looking for smallest to fifth smallest (separate cells B5=1, B6=2 etc.)
I have the following formula below to return "C" if the value in the cell is "C", and nothing if not.
I want to expand it to return "C" if the value in the cell is "C" or "D", for a range between C2:H2.
=IF(C2="C","C","")
I'm have trouble with this easy adjustment.
MathScienceLanguageOverall
PassPassPass----
PassFailPass----
PassFailFail----
FailFailFail----
What formula should I use to show "Pass" if a student passed all three subjects, "FAIL" If student did not pass in any subject and "TRY AGAIN" if he passed at least one subject? I can't seem to accurately plot "IF" formula. Should add in "AND" / "OR" as well?
Bid Manager Probability of Success Total Fee
cp 25% 675,000
rz 40% 18,383,541
nw 50% 8,700,000
cp 10% 4,500,000
ap 50% 1,200,000
kd 50% 49,500
sl 25% 3,200,000
bc 20% 310,000
sl 20% 3,460,000
nm 30% 6,750,000
at 50% 23,000,000
ap 30% 367,500
rn 40% 13,750,000
I have a list of commodity and percentages of success with fees in the 3rd column
I need a function to count the records with multiple criteria e.g greater than 20% but less than 30%.
Second i need a function when it complies to previous formula it should give fee total pertaining to that count.
I have a condition that it only applies to criteria before a certain date but I cannot get it to give me the right answer.
Original Formula ...
I would like a consistent OFFSET function formula across a row but my columns move from monthly to semi-annual periods at a point in time. How do I handle the move from monthly to semi-annual periods in my OFFSET formula?
View 4 Replies View RelatedI would to use the subtotal command and have it exclude rows from another column in addition to obeying an autofilter:
A B C
1 Area Rep Name Amount
2 Quota John 100
3 NW John 200
4 NW John 300
I want to use the subtotal(9) on the amount column, but I don't want it to include rows where the value Quota is in the area column. The idea is that the amount for a given autofilter condition (rep = john) should only show his forecast amounts but not his quota number for his area. DSUM includes hidden row as does sum
I have tried
subtotal(9,sum(C2:C4*(A2:A4<>"Quota")))
but that does not work
=SUM(C2:C4*(A2:A4<>"Quota"))
works but does not let me filter the data to only show values for john versus all reps