=IF(E7=F7,0,IF(E7>F7,E7-F7-INT((WEEKDAY(F7,2)+E7-F7)/7),F7-E7-INT((WEEKDAY(E7,2)+F7-E7)/7))).
I have this formula in a cell. f7 is the control cell. if f7 has nothing in it i dont want to do the formula, and if f7 has data to do the formula, is this possible to do?
Note: I know the syntax below is not how you would enter forumlas into Excel but I am using it to quickly illustrate what I'm trying to do and need help with. A cell not in column D, E, or F contains a formula of the form: F=IF(D>0, D/E, "blank") .
Note: If a cell in column D>0 (eg. D5>0) then the cell to the right of the selected D cell (eg. E5) will also be >0 ; otherwise, both cells will be empty.
This is what I want to do: If cell D?>0 , then F?=D?/E? ; otherwise, F?=empty .
Example 1: If D5>0, then F5=D5/E5 ; otherwise F5=empty .
Example 2: If D7>0, then F7=D7/E7 ; otherwise F7=empty .
Etc. I want this to apply to all rows.
I cannot enter the formula directly into the F? cell because sometimes I will need to enter data into cell F? manually. When I need to enter data manually into F? this results in the formula being overwritten by the new data and this means that if I ever needed to have data calulated based on the formula F=IF(D>0, D/E, "blank") I would have to re-enter the formula from scratch over again; obviously this is a nusance.
I was wondering if there is a formla that will delete a formula when it has done its calculation, or stop the formula from constantly updating.
I've got a formula
=IF(COUNTA(A1)=1,TODAY(),"")
When something is typed in Cell A1 the cell with the formula will input todays date.
Is there a formula that will stop this formula from updating, as when you go into the file on a different day the date would have been updated.
I am want to copy a formula across several work sheet and have the formula always take data from previous work sheet.
2) I am working with this formula =C12+INDIRECT((MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,256)-1)&"!"&"C12")
and it comes from this thread http://www.excelforum.com/excel-gene...orksheets.html. I have included a worksheet attachment that has explanations
- I have total of 13 sheets in a workbook - 12 sheets represent 12 months with data; 13th sheet is single sheet in which i would like to get complete overview of 12 months
- each of 12 sheets has actually sales results for multiple products with following data: internal code, manufacturer part number, name, and qty sold in that month
- situation is that some products have been phased out during the year and some were introduced so each sheet is slightly different in terms of in which row certain product is located
What i would like to achive is to make 13th sheet (whole year overview) do the following:
- there is a list of all the products in it, each product has unique internal code - this code (from each line) should be used to find that code in each monthly sheet, then find its monthly sales value (copy it) and paste it in sheet 13 in cell that represents this product and particular month.
In other words i would like to see for each product what was monthly sales throughout this year, but avoid manually filling in qty for each product per month.
I have attached a sheet that has part of a data list, sheet called (Full Data) what i am trying to do is seperate the data into event locations into individual sheets.
The data ref will be column F which is the different event locations.
I thought the best way to try and do this was to create an if/ match formula using the sheet tab names as the if match, with the event locations in column F.
I have added two sheet tabs so you can see that i require the data for (Ain) to be put into the Ain sheet.
The data list in Full Data sheet will be continuously updated so i will need the range to be around 10,000 entries.
I have a question about using conditional formatting in excel (2010); I made a table with the following columns:
"Supplier Name" "Supplier Lead Time" "Internal Lead Time" "Total Lead Time". I made two different scenarios to show different supplier lead times and different internal lead times, and used the minimum function in the "Total Lead Time" column to find the smallest total lead time to select the best supplier.
The last thing I would want to do with this set of data, is plug in a formula that would somehow indicate which supplier corresponds to the shortest total lead time (which supplier has the smallest supplier lead time). I'd like to be able to use a formula that enters the name of the supplier in a designated cell, which I could indicate as the "Preferred Supplier" cell. If this is not possible perhaps there is a way to highlight the supplier's name with conditional formatting?
I have a 5000 line table I am filtering by a few columns, and I'd like to calculate an exponential trendline value.
=INDEX(LINEST(LN(R1059:R1167),W1059:W1167),1)
But I actually don't want all the values from R1059 to R1167 - I want to select only the displayed values (R1059, R1068, R1077, etc). Is there a way to select only display values to use in a formula? The problem is it would be a lot of manual work to select them all - there are 50 or so instances I would have to select 13 manual values.
I am using Excel 2007 on XP.
Id like to apply a formula, any formula to an entire column if it contains data, and incorporate the original data in the calculation and then replace the original data with the result. I don't want to have to create new columns.
I'm using this to fix up database results; a common problem is dates in dot format e.g. 14.11.2008
All I have so far is an autofill formula that overwrites everything. Can someone help me with the rest? I'm using the SUBSTITUTE function to replace the dots '.' with slashes '/'
Sub Create_formula_result()
Dim Limit As Long
Dim r As range
Set r = range("A1")
r.FormulaR1C1 = _
"=IF(RC[0]"""",(SUBSTITUTE(RC[0],""."",""/"")+0) ,"""")"
Limit = ActiveSheet.UsedRange.Rows.Count
r.AutoFill Destination:=range(r, Cells(Limit, r.Column))
End Sub
I am working on a project and would like to see if there is a solution for it. i have a workbook that has data entry that is summarized at a master level but I need to automatically use a formula to update another sheet after clicking an udpate button. The data from the data entry sheet needs to be allocated to all the lines that has the same master item based on the formula. A test workbook is attached ...
View 1 Replies View RelatedI have a situation where I have to curve fit data, this can lead to different formulas being used with varying constants.
Is it possible to pickup a TEXT based formula and related constants from other cells, and then place this into another cell as a functioning formula. For Example
Cell A1 contains the formula as a text string whether it be y=a+bx+cx^2, or y=a+b/x, etc
Cells A2:A6 contain the individual constants, a, b, c, etc
I would then want the VBA to read the text based formula and put it into an output cell as a functioning excel formulae.g
In cell B10: =a+b*A10+c*A10^2
I understand picking the constants up and putting the formula should not be too much of an issue, however trying to insert the variable form of the curve fit is the part that I am struggling with, and am unsure if possible.
Here is the scenario:
A B C D
BananasApplesOrangesTotal113=A1+B1+C1
I need to reference the formula in D1 with the cells headers names.
In a perfect world, it would take
=A1+B1+C1:
and produce:
=Bananas+Apples+Oranges
Essentially, I would like a user to be able to select a PUB from the Data Validation drop down in row 2 of the PUB RATES sheet so that the corresponding information in the DATA sheet autofills.
Currently, this works only for the first column under each PUB when selected and this fills across all 4 columns (rather than the respective information for each column filling).
Also, the Data Validation dropdown includes blanks which I would like to exclude.
I have used a Range Name for the Data Validation of each PUB so that these can be drawn from a separate sheet as I don't want all the DATA content on the same sheet as the PUB RATES content.
formula to make data on same line.On converting data2 is above data 1. I insert a column on left . Need to use mouse right click shortcut delete manually shift cells left and then delete shift cells upto have both data on same line but should be in different cells and same sequence per attached ALSO TO REMOVE "/ -DASH HYPENS.
What I need is formula to move the data2 on same alignment and to delete the two empty rows between both data.
See annexed file for expected results.I have preference to have a formula much more.
I have an existing formula in a cell linking back to a start date only. determining how to add an additional formula to exclude weekends, and possibly holidays.
View 2 Replies View RelatedI am trying to use a combination of Concatenate and IF formula to produce an email.
My input.
D4: First Name:
D5: Middle Name:
D6: Last Name:
D8: Organization:
Once all these are filled, I want the formula to produce a result like
FirstName.M.LastName@Organization.com
I have used the following formula.
[Code] .....
Problem is if there is a middle name the formula works fine, but in case where there is no middle name, it produces the following result.
FirstName..LastName@Organization.com
How do I remove the additional (.) in cases where there is no middle name.
Attached File : Email Generator.xlsx
I'm having some trouble trying to get excel to input a formula into a cell. I'm still a novice at VBA right now, so I don't think my problem will be too much of a brain buster.
I want a formula in Cell A6 (and I already know it correctly works) in this format: =E6&VLOOKUP(I6,'FA-Fund Data'!B$1:C$2000,2,FALSE)&J6
I have 12 observations per variable over 2013. At the end of each month I gathered the average value of X of said month. What I want to do is convert these observations to a list of weekly observations, where each week in January gets the value of the January observation
Example:
Month123456789101112
Value 2345678910111213
And get it like:
Week Value
1 2
2 2
3 2
4 2
5 2
6 3
7 3
and so on.
Since I've got a lot of variables I'd like to use some kind of formula.
Is it possible to write a formula that skips x number of cells and have the formula autoincrement as usual. For an examples lets say I want to skip 3 cells and I have entered in the cells listed:
A1= "1"
A2= "2"
A3= "3"
Then I type in the simple formula in the cell
B1= "=A1"
and then drag down but it skips 3 cells so then
B5= "=A2"
B9= "=A3"
If it didn't skip then
B1= "=A1"
B2= "=A2"
B3= "=A3"
this is just an example as I will be writing more complex formulas and need some thing that I can write into the formula so that it skips.
Something similar to this B1 "=A1(skip3cells)"
I would like to copy a formula in a cell and then paste only the text of the formula, but I can't figure it out. Basically, I would like to avoid going into the cells and absolute referencing or hitting F2, then copying the text.
When I hit "Ctrl C" to copy the cell, then hit "Alt/E/S/F/Enter" to paste the formula, it is just like a regular copy/paste formula-wise in that the references move.
I have some student marks in columns B to F. If some one get below 40 marks he fails and the subject in which he has been failed will come in Remarks column. If he has passed in all subjects remarks column will show Pass.
To bring failed subject initial in Remarks i have to create 5 additional column and then thru Concatenate i joined them.
Is There any formula to show fail subject in Remarks column without creating 5 additional columns?
This task joins a string together based on a number of characters per cell in the range.
I want to isolate one range, Col N, and add an IF condition to it.
There may be other issues preventing this from happening, e.g. the number of IF that exist in the complete formula. I will isolate the current cell and its requirements and then post the entire formula at the end for reference....
I am looking to average a range of cells which won't always be the same size. How do I create a formula array that will omit empty cells in my formula.
View 9 Replies View RelatedI recently added a formula to a spreadsheet with som complicated formula. It worked ok and I saved the sheet. Now it takes 5 minutes to open the sheet and when I try to do anything,like delete the inserted column the program locks up giving a no responding message. I can do without this column if I have to.
View 4 Replies View RelatedI am using vlookup to get a cell value from another sheet, but if the cell has "&" or "/" I need to substitue "&" and "/" with "and" so that the cell can be added later to a url.
i am using =VLOOKUP(a1,Sheet2!A1:W17968,6) to get the value of a1 in sheet 2 and return the value of column 6
this will return "Audio Cables & Leads" but i need it to say Audio Cables and Leads
I need the formula to also check and replace "/" with "and" as well so cables/wire will be Cables and wire
I have bunch of column Data in Column D:H
My data starts in row 5. I need a excel formula to add data every 63rd row for column D:H.
So for example for column D, i would have D5+D67+D129 and so on until D687.
formula to add up certain data.
In the example below, in Column A there are "T"s and "C"s. In column B there are distances.
In Column C, I need to sum the distance travelled since the last "C" on each row with a "T".
Sheet1 ABC1TypeDistanceTotal travel since last "C"2C 3T334T475C 6T227T468T289T72410T41911T52412C 13T2214T46
Is there a formula I can use in data validation that will only allow a six digit number and not allow other characters such as a /?
I tried =LEN(A1)
I have a spreadsheet that contains a list of dates: What I need is a formula that will count the number of cells that hava a date more than 6 months old. I also would like the field automated so I don't have to change the date manually every day.
=COUNTIF(S5:S593,"<2012/06/18") This formula will give the correct read out, but I must change the date manually.
My attempts at adding a =today() command in place of the date result in 0 being the result (not correct)
This is what I have tried: =COUNTIF(S5:S593,"<"=TODAY()-"183")
In my attached spreadsheet example below, in the Rollup Data sheet, I have a formula (Cell: C17) that will give me the actual cost totals that has been invoiced on WBS Element (DWRRI-BW096-231) for a total of $35,004.81.
What I need the formula do is run a redundant check procedure on my new WBS Element (DWRRI-BW096-231) actual cost total formula in the Rollup Data sheet (Cell: C17) against/vs. what the SAP system provides in the raw SAP Excel export contained in the PTD-Actual Cost sheet for the WBS Element (DWRRI-BW096-231) actual cost total of $35,004.81 (Cell: F9) that's highlighted in the yellow row.
In the Rollup Data sheet (Cell: C18), I need this formula to perform a similar function the as the previous formula above it (Cell: C17), but it this formulas function (Cell: C18) would have a separate operation that would only look for and return the single/sole WBS Element (DWRRI-BW096-231) actual cost total contained in the PTD-Actual Cost sheet (Cell: F9).
In the Rollup Data sheet I could then compare my two WBS Element (DWRRI-BW096-231) actual costs totals, the first from the automated addition of all the individual matching WBS Element actual costs into an actual cost total (Cell: C17), the second (new formula I'm requesting) from the matching and return function of the single/sole WBS Element actual cost total (Cell: C18).
So, if the two separate WBS Element actual cost totals (Cells: C17 vs. C18) both equal $35,004.81, the formula in C17 is a success and has correctly identified and added all the actual costs contained in the PTD-Actual Cost sheet, but if the two separate WBS Element actual cost totals (Cells: C17 vs. C18) both do not equal $35,004.81, the formula in C17 failed for some reason and has not correctly identified and added all the required actual costs contained in the PTD-Actual Cost sheet.
How to Add Total $ Value Formula into an Existing SUMIFS Formula.xlsx