Extract Cell Value From Sheet After Matching Certain Criteria?
Aug 9, 2012
I have two excel sheets. Lets say one is for May and another for June month. I have some data like name of account, account number their ratings . I wish to find if the account present in June month was present in May month sheet or not and if yes, then i need to extract a rating entry( column) from it and paste it in another sheet where i have copied all the data of June month so that i am able to see if the rating has changed over the months or remain same for that particular account...
i am trying vlookup but it is not able to search the name of the account even when it is present in the sheet( like WBIDFC) ... it seems the problem may be because of the format but i am not sure.... moreover i tried to vlookup via account no. but problem is that sometimes the account number is given and sometimes not.. Moreover , the format also does not match sometimes..
I am trying to make a simple formula to populate a cell with the first matching substring found in a data cell (from a fixed list of substring keys).
Example of desired results:
Substring data: {X, YY, ZZ} (typically 6 to 15 values in real world use)
Data..........Calculated result..........Comment AAX.................X........................Substring X was found in Data.
ABC.............[empty]...................None of substrings were (X, YY, ZZ were found)
XYYZZ.............X......................(only first match need be returned)
ABCZZ.............ZZ....................Substring ZZ found etc….
I am looking for something cleaner than nested if statements since there are likely to be a lot of values and different variations. The work would then be to copy the formula and populate the list of substrings to search for in the data. I tried some array formulas using search() but no luck so far.
i want the compile all information from few sheet (20) with same format on daily basis based on due and CF status cash flow. the format as below as the result will same as original format,
I've got an array of data about 30x1500 cells in size, I want to use this data in a table I'm making on another worksheet.
Normally I'd just use VLOOKUP and this works great in most cases but I want to do something a little bit more complicated. Basically I want to (in normal English) have excel look at the table, find a cell that matches criteria in this data array, then compare to another cell on the same row in this array. If the criteria for these two match then display the data from another cell on the same row. The criteria for matching the first cells would be an exact value, both being strings of text.
I've tried using a couple of nested VLOOKUP and IF statements but failed .....
I have two work sheets I'm using. Sheet1!A column contains a list of customer names like "Smith, John".
Sheet2!A contains the same list of name with additional information found in the row. For example, you will find "Smith, John" in Sheet2!A3 and John's phone number in Sheet2!B3
In Sheet1!B it to find the associated telephone number based on matching criteria from Sheet1!A and Sheet2!A
For example, Sheet2 has the following data.
[Code] ....
On Sheet1 I have the following names. You'll notice some of the names repeat.
[Code] ......
In column Sheet1!B I would like it to scan column A from sheet2 and display the data show in column B. So it would look like this-
[Code] ....
You'll notice some names repeat but it always displays the correct number from Sheet2.
I have an items list on page 2. On page 1 I want to create a drop down menu in C2 that references the list on page 2. Then when I choose an item, I want the additional information in cells D2 and E2 to come in automatically. The list on page 2 will be expanding daily, and when I expand it I can simply insert a new row so I correctly alphabatize it instead of constantly having to resort it.
With that said.... 1. How do you put in the drop down box that references information on a different sheet?
2. What is the best way to reference the information in my ever expanding situation: Index/Match, Vlookup, Lookup, or something I havent mentioned?
I have about 30 spreadsheets that I need to sort data. I'm using a Excel: Mac 2011.
Each sheet has about 100 rows and 80 columns.
I need to extract the rows that have a colored cell somewhere in the row. There are three types of colored cells: black, green, and red. The green and red have X typed in them too. The black cells have D typed in them.
Every row in the sheet has at least one cell with an X in it (colored or not).
I just need the rows with a colored cell to be extracted or filtered from all the rows without colored cells.
I am working with a spreadsheet that has our user data; User(First) Name, User(Last) name, Computer Name, MAC address, Phone Number, Seating Position and Network Port Number.
I have let this get horribly out of sync, moved computers around, and moved them while the MAC address column was hidden, As a result, I have a bunch of users listed as being at the wrong computer. I have a second spreadsheet I generated that gives me the logged in user for about 2/3 of my computers, with the computer name(Just 2 columns, 'A' and 'B'. I would like to have Excel match the computer name and then overwrite the user name. For example, if the first computer in my correct user list is DELL-99945ty2, and the user name is "Jimbo Jones", I would like it to search the first Excel doc(The one with all of the user data), and replace the user name with "Jimbo Jones". Is this simple and straightforward?
In my main spreadsheet, the user name is in column B and the computer name is in column G, So I want to use the values from Column B in my second document to find its match in Column G of the first spreadsheet, and then replace the data in Column B with Column A in the first spreadsheet.
I have a flat file (see attched). What I want is to be able to choose a "Unit no" from a form combo box and a list of names linked to that unit to appear below
I have two sheets - one work sheet and the second - database with existing entries. Going by visual example below, I need the column C of the work sheet to automatically populate with the data pulled from the database sheet. For example, C4 on the Work sheet should find both values "Bike" and "Green" in one row on Database sheet and return the corresponding value 44444 from F97. The work sheet cells in the row C should remain empty if no match found on the database sheet.
Macro: Copy selected cell to another sheet next blank row
I'll just make this simple to understand.
*Again, I have first sheet, named "SUMMARY" *On Column A, I have list of names A1: Star A2: Moon A3: Sun A4: Clouds *these cells corresponds to the Cells of different sheets A1: Star = E3 of Sheet 1 A2: Moon = E3 of Sheet 2 A3: Sun = E3 of Sheet 3 A4: Clouds = E3 of Sheet 4
this is what I should get:
1. I select the cell A1 as an active cell 2. press the button (with the macro on it) 3. I will automatically go to the sheet where "Star" is located
I have in my 'Daily' sheet I9 which needs a formula to look at the date in C9 and the scan range 'Weeks' F6:AN41 and find the cell with the matching date and then whatever text is in Row 2 of the column the date was in will be returned.
While the first file contains about 300 active products the second one has a list of about 2000 active and deactivated products. What I need is to extract the UPC from the second file matching the active SKU from the first file so I have a final file that looks like this:
I had a VBA excel question. I have 2 excel files. Each file has a column on product SKUs. What I need is a VBA function that compares the 2 key columns and extracts the matching SKU and saves them in a 3rd excel file. That is the 3 file should contain only the SKUs that are in both of the 2 files.
Code: Private Sub GetColData() Dim SrchRng As Range Dim SrchVal As Range
[Code]...
And it is also possible by using Column Number to retrieve the data SrchTxt, which is in a cell in the Row, in which "Roy" is found. This Row in this example is Row 5. Column Number may be anything within the search Range. Column Number is 3 in this example.
In Sheet1 "Poet" is in C1. (SrchTxt)
How to retrieve data of the cell in Row 1 in the column where "Roy" is found?
On the 'values' worksheet (first one), a formula in cell M2 that will search the worksheet 'oc_users' (second one) for any row containing "Active" in column G, these rows will return the corresponding email address in column A of the same worksheet. Skipping "Inactive" rows.
End result: anyone with an active status in oc_users will have their email populated in the 'values' worksheet.
I get one report.xls workbook by FTP. This book contain date and time in cell A14 in sheet1. e.g. 30-04-2006 19:38:00
I need to have macro to extract only time and paste it to cell A56 in same sheet. How can I do that. The date format is 30-04-2006 19:38:00 and it may be 05/05/2006 7:15 am. Or it could be any type of date format. Please send me how can I work with different date and time format to extract the only time and paste to other cell.
I have a cell (A1) that contains text. That text will match a single value in a reference list (i.e. range of cells e.g. Z1:Z26). When the match occurs (e.g. A1 = Z16), I want the format of the reference cell (fill color, text color) to apply to the cell of interest (A1). The reference cells are manually formatted.
I know that I could create a long list of conditional format formulas instead of using the reference, but it seems that there must be some way to tell excel: if the cell value contents are equivalent, the formatting should be as well.
programming 2 macros in a bank reconciliation sheet I am trying to create.
Basically the data consists of two sets: the ledger side and bank side. Both sides consists of multiple columns that include date, description and amount.
The following two situations can occur and which need to be covered with a macro.
Many to one matching When we make payments to say 100 different suppliers at once, the ledger side will show 100 lines with the different amounts. However on the bank side it will only show one line with a total amount for the transaction. As the description on the ledger side is the same for all transactions done at the same time, it should be possible to have a macro add these lines and compare the total with entries on the bank side. Once a matching amount has been found, the macro should place an ‘x’ next to all entries on the ledger and bank side, in order to show that these transactions have been reconciled.
Partial cell matching In this case we are only dealing with one line on both the ledger and bank side. The issue is that the description does not always perfectly match with one another. The ledger side might say ‘Brown Corp.’ and the bank side might say ‘Brown Corporation’. I want to come up with a macro that can recognize this partial match and still reconcile the lines by placing a ‘x’ to both the ledger and bank entry. The match however should be done with a combination of description, date and amount as several different bookings might be done for the same supplier in the same month.
I have a built a catalogue of records for various of my companies assets. Each asset has its own sheet in a work book and I have used a vb macro to include an automatic Index sheet at the front of the book. This takes the names of the various tabs, in the order I have them in the workbook and creates a simple listing in column A as an Index List
What I want to do is to build a summary table to the right of the Index List, pulling in a few of the key data points about the assets into a single table.
To do that I need to be able to extract the text string from the Index List and use it to form part of a cell reference pointing to a specific cell in the relevant individual Asset sheets.
I have an output table that looks like the followings:......
There is 1 input for the spreadsheet: What month? Enter 9, 10, 11 etc. I need it to pull from a data sheet that is set up as such:......
So effectively it needs to vlookup the name in column A, (A, B, or C), and then it needs to match that to the column that has the same name as the output table (Crit.1 or Crit.2 and the number of the month above it (10,11,etc). I attached an excel sheet to better demonstrate
If you look at my attached example. I'd like the date line/columns in Sheet "8002372008" to be populated automatically with data from Sheet "Data".
Is this possible? VLOOKUPs and MATCH are what I was thinking, but I'm not sure how to do it.
I know it could probably be done in VB, but I don't want to have to click on each "800 Number" sheet to update it every time, so that my summary sheets are accurate.
I need to match data with specific criteria. Details of the problem are as follows:
I have 2 sheets: "Main" and "Sub"
In "Main" there are 3 Important Columns: Col "C", "I" and "AF" In "Sub" there are 2 Important Columns: Col "I' and "N".
Value in column "C" of "Main" is same as value in column "I" of "Sub", but not in same order.
Now the specific criteria:
If value in Column "I" of "Main" is not equal to "Zero", then the macro should pick up the value from the corresponding column "C" of "Main" and search for the same in column "I" of "Sub". After matching the same, it should find corresponding value in column "N" of "Sub". Then the macro should pick up the value from column "N" of "Sub" and put the value in the column "AF" of "Main".
This is basic requirement.
I am unable to retrieve the right value for the same.
Fine tuining will be:
If the value in column "N" of "Sub" is "Fully Automated" then it should only write "Automated" in column "AF" of "Main". And If the value is "Manual + ...." then it should write "Manual" in column "AF" of "Main".
Modifying the following line by replacing the row number in AC2 and Q2 by an incremental variable? I mean something like “AC”&Rw , “Q”&Rw, &Rw, Rw being my incremental variable used to go through the rows.
How do I return an offset value within a named range using a formula? For example, my range "RngTest" is from C3:J43. If a value of "Product123" is found within the range, (lets say its found in cells C3; E5 and E7), I need the accumulative values in the cells 'below' (in cells D3; F5 and F7) added ( SUM) and returned to cell L3. Therefore if Cells D3; F5; and F7 have the respective values of 3; 4 and 5, the value of cell L3 should be 12. Also, do I need to express "RngTest" or "C3:J43" or does it matter?
I am trying to solve a small problem that i have, I am not that good with VBA and need somehelp. heres the situation. Sheet 1 is filled in col.1= title, col.2= table# (ex. 1,2,...11)col3.= grid location (ex. a-1, a-2...a-10,b-1...b-10....d-10). I will enter a title then pick a table then a grid location. On sheet 2 also known as table 1. col.1 =grid location (ex. a-1, a-2...a-10,b-1...b-10....d-10) col. 2 = title.
I want to create a macro or function that can evaluate sheet1 and pick out when col.2=table 1 and col.3 = grid loc. A-1.... through D-10 then give me what is in col.1. this will have to be done for 11 sheets 1 sheet for each table.
Sheet 1 has a list of unique ID numbers for several people. Sheet 2 is a master list of unique numbers for the entire population plus emails. Can i use a formula in sheet 1 to match the emails from sheet 2 to the unique id numbers in sheet 1?
