copied some of the code from this website. but still i am struggling with coding. it gives error subscript out of race of my sheet name
what is wrong in it
/tag acccounts = ActiveSheet.Name
Sheets.Add
TempSh = ActiveSheet.Name
Sheets(TempSh).Activate
Application.ScreenUpdating = True
For Each f1 In fc
With Sheets("accounts")"/tag
So the problem is that I have two workbooks: one has a set of identifying values which are a subset of one of the sets of values in the second and I need to match them up. In addition I need to take the values two columns to the right of the matched values in the second workbook and put them in the first.
Here is what my formula looks like now.
=IF(A5=VLOOKUP(A5,'[WBOOK2]Sheet1'!$A:$A,1,TRUE),INDEX('[WBOOK2]Sheet1'!,MATCH(A5,'[WBOOK2]Sheet1'!$A:$A,0),3),"NF")
Whenever I try to run it an error message comes up and highlights the match function name.
I need to fetch corresponding data value from a data set which is spread across the sheet horizontally as well vertically. i need the net sales and net profit figures to fetched to a different worksheet/book. i have quarterly data horizontally and yearly data vertically. Below is a table in a horizontal manner. How to automate or less-time-consuming
Output required as:
period 6-30-2000 9-30-2000
net sales ........ ............
net profit ....... ............
Type
Un-Audited
Date Begin
4-1-2000
Date End
6-30-2000
[Code] ......
I have a sheet which has certain formulas & charts. I have a folder which has several workbooks of data.
Generally, I open the folder, open one workbook, copy the data, paste it to my Master Workbook, and based on this data, my charts update.
Now, the problem is that, I have to open every workbook one by one, copy and paste it to the master.
I have not less then 210 workbooks. I just want to know if it is possible to open the folder, open the desired workbook, copy the specific data and past it to master workbook, FROM Maste workbook itself.
Fetch data from the table on the page given by the link below..
http://www.moneycontrol.com/stocks/f...l&sort_order=0
I tried to use the following code to get data from an ASPX webpage:
[URL]....
VB:
Sub Fetch_Marcas()
Dim IeTbl As Object
Dim obj As Object
Dim Scrn As String
Dim objIE As SHDocVw.InternetExplorer 'Microsoft Internet controls (shdocvw.dll)
[Code]....
However, I cannot get past the point where I click over the register (highlighted in yellow in Picture 1), to get the data displayed at Picture 2.
Picture 1
Picture 1.jpg
Picture 2
Picture 2.jpg
Please note that this query requires to click over what is not a button (I looked in the forum, but no similar question was made before on this topic).
I am trying to find unique values on one page and copy/paste them on another page (all within one workbook). I tried to use advanced filter, but ran on some problems: i) it does not copy values on to the new page ii) it is not dynamic.
my information is entered on a daily basis, which is why I need the filter (or code) to be dynamic. The information, however, is not stored, but rather generates a daily invoice, this is why I want find only unique values to appear on a new page (invoice).
Is there a way to capture the records(which meets the criteria) from different excel sheets' sheet1 (A.xls,B.xls) located in some path (c: est) and copied them into our own Result.xls spread sheet?
It would be great and very useful, if you could provide the solution for this.
Attached is my .xls with dummy data Fetch data By Director.xlsx.
My intention is that once the Director and Month in tab 'By Director & Month' is chosen and the Fetch Data commandbutton is clicked, a new workbook should open.
This new work book should have :
all entries in tab 'Monthly Invoice Input' for that Director-Month combination,along with a sum total of column Q(Total invoice amount) in the last row.
I am trying to create a macro for vlookup. Each time the name of the source file changes. I dont want to update the formula everytime. So Iam trying to do a macro which will fetch the data from the file that the user mentions in the sheet2.
I have attached the source file and the VLookup file. Now when I enter the source file path in sheet 2 of workbook "Vlookup", and then if I run the macro it should open the file and put the dates in Sheet1 (Columns "D" and "E") of workbook "Vlookup". The dates in the source file will be available in sheet 1(column F and H) of that workbook.
I have a requirement to pull report from BMC remedy using VBA. I am sure that many people would have achieved this. .
View 1 Replies View RelatedI would like to be able to have Excel VBA pull down the data from the following website.
The first URL will take you to the website, but you then need to select a state shown in bold from the Radio side of the index window in the middle of the screen. Once at the next screen, this is the table I wish to download into excel.
I want to do this for all the states listed. How can I do this or is it possible since you have to select a state prior to the listing.
HTML Code: [URL] ..... I found this code from anothe thread but it did not work.
Code:
Sub GetData()
Dim x As Long, y As Long, t As Long
Dim htm As Object
[Code] ....
I have created a macro file which will fetch the data from sql server. Here is the code
f Me.Cmbchoose.Value = "" Then
MsgBox "Please Choose From the drop down Menu!!", vbExclamation
Exit Sub
End If
If Me.Cmbchoose.Value = "Merchants Reports" Then
Dim oConn As ADODB.Connection
[Code] .....
The code is working fine. Now my question is that I want to access it from my home. How do I do that without DSN set up?
I need to list all freeze pane position from every sheets in my workbook in order to reverse a "unfreeze all" function. I don't know if i need to be more specific ?
Situation : I have a workbook with many sheets. Every worksheet has a different freeze pane position. I hate freeze panes, so while i'm working in a workbook, i remove them all. My boss likes those ones so i want to give him back my work with the same layout.
The main thing i don't know here if how you ask Excel to fetch freeze pane info. Ideally the information will be reported in a new sheet, columns : Sheets, HorizontalFreezePanePosition, VerticalFPP...
Once i will have this list, i will create a new macro and set back freeze pane individually.
I want some code on how to fetch data from an Excel Database and display it on respective textbox.
Like I have these coloum name in excel sheet; Emp Id
Name
DOB
Dept
Reporting to
Transport req.
I want to have VBA code to fetch it on txtbx1, txybx2 and so on.
In A1 there is an ActiveX Control Text Box inserted, now in A1 cell which is beneath this text box contain the formula that if A9 is blank than "Customer Name" should appear else it should show blank. But the problem is when I write some thing in this text box which is connected with A9, formula works as "Customer Name" disappears but when I delete in text box it simply acts as if something is still present in cell A9 and formula does not comeback to "Customer Name" again & therefore in order to appear "Customer Name" I have to go to A9 and press delete button to get the desirous result from the formula.
Readers are requested to make this formula work becz the situation in which this formula has been invented is well fitted and not other formula can supplant it.
I am trying to open set of excel files to fetch data starting from a master excel file where the links are given using a loop. Some of files given as links are either absent or the link is wrong.
* What is the syntax to find if the link is correct/present
* What is the syntax to find if the file is present in specified location
* What is the syntax to find if the file is password protected to open
* I use error handler to resume the next statement if OPEN statement fails.It works fine inside the loop only for first two files.
For example if the third link is errorneous the error handler fails and RUN TIME ERROR occurs.
I have a problem with one macros. That VBA code copy every row into different sheet.
I've tried to copy every row + one row, which appears to be a title row. I failed
Please someone to view that code and tell me what corrections i have to do.
One more thing:
How can i Copy that sheets into different files ?
Here is the code:
Sub PrepareForPaste()
Const copySize = 1
Dim repeatCount As Integer
Dim startRow As Long
Dim endRow As Long
Dim lastRow As Long
Dim LC As Integer
Dim sourceSheet As String
I have a spreadsheet (see atched for example data). Using vba I would like to seperate the lines of data into new workbooks depending on their company code.
I.e all lines of data starting with '6002' would in a new workbook called 6002.xls.
I receive this data on a monthly basis and there are diffferent amounts of data per company each time.
I have 2 work books A and B. I want to be able to copy the entire rows out of WB A, which contain the same data as one of colums in WB B
e.g
WB A
Bob Smith | 3 Smith Lane | 0204587512 | bob.smith@emailaddress.com |
Tom Brown | 3 Brown Lane | 020241445 | tom.brown@emailaddress.com |
WB B
| bob.smith@emailaddress.com |
Would give me WB C
Bob Smith | 3 Smith Lane | 0204587512 | bob.smith@emailaddress.com |
Any way of doing this?? I know that i could use ' find' then copy the data, except i have around 300 records...
I have two workbooks with similar columns (note: both workbooks may not have all the same columns, but for the same columns, the names are written identically in both workbooks). I'll walk through what's in each sample workbook I've provided and what I am hoping to accomplish.
Transfer Rows1: This workbook contains multiple rows of data for one company or ID (For example, Client "A Co" has 4 rows of data.)
Transfer Rows2: Contains some of the same columns as workbook 1, but not exactly in the same order.
What I want to do is take all the multiple row data for an ID in Transfer Rows1 and put the information as a single row in Transfer Rows2. So, Client "A Co" in Workbook 1 has 4 rows, but in Workbook 2 will have 1 row. It's matching columns, essentially. Columns that are present in both workbooks should have the data filled out in only ONE row in Transfer Rows2.
As far as cost is concerned, Cost A in Transfer Rows2 is just the sum of all the Cost A's for a particular ID Number in Transfer Rows1 (same for Cost B and Cost C).
I also want the installation date in Transfer Rows2 to be the latest installation date for each unique ID from Transfer Rows1.
Also, a particular client can have multiple CID's. This appears in different rows in Transfer Rows1, but should appear in one row, multiple columns (again, for each unique ID) in Transfer Rows2.
Notice, the column 'Products' in Workbook 1 is not in Workbook 2, and that's because each row for column may have different information and thus I would not be able to transfer it into a single row in workbook 2.
TransferRows1 is where I am right now and I have filled out TransferRows2 to indicate what I hope to accomplish. I am posting here because the actual set I am working is fairly large, on the order of ~ 35,000 rows and need to automate this process using code instead having to copy and paste thousands of times.
I need to consolidate/summarize specific rows from various workbooks into a summary sheet on a new workbook. I get a daily workbook, and am currently manually copying and pasting the rows I need at the end of the month into a summary sheet.
All of the workbooks are in the same folder. All of the workbooks contain data in Sheet1 only, all have the same header row (A). I need to find and copy the entire row based on two values in column AH. If the column contains JAN LA or JAN LA 125, then I need to copy that entire row into my new summary sheet. Not all of the workbooks will contain data for me, but most will.
I have been trying some of the macros I found on here to try to copy every Sheet1 from all workbooks, but I can't get it to work. I was then going to filter through the data to find the ones I need. If I can get it to copy only the rows I need instead of the entire sheet,
I have created timesheets for employees that work in our shop. Our company manufactures products for different industries, such as mining, wind power generation, general industrial applications, and so forth. I modified some time sheet templates I found for excel to accommodate our company's actions. Each employee has their own workbook, in which the months are separated into different worksheets. Each sheet is divided further into weeks and in each weekly section the areas of information are divided as follows:
A / B / C / D / E / F / G / H / I / J / K / L / M
Work Sector / Workshop or Fieldservice / Scope of Work / Job # / Reg or OT / Mon / Tue / Wed / Thu / Fri / Sat / Sun / Total
There are 7 workbooks (one for each employee), each with 12 sheets (one for each month). I want to create a master sheet that will pull information from everyone's timesheet if they worked on a particular job. In other words, I would like to type a job number into a cell, then have excel look through everyone's timesheets and pull over only the rows of information that contain that job number
I have 25 files with certain worksheets that I need to move to 25 other files.
Worksheet 1, 2, 3 and 4 in Workbook A needs to be moved to Workbook A-2014 Worksheet 1, 2, 3 and 4 in Workbook B needs to be moved to Workbook B-2014 Worksheet 1, 2, 3 and 4 in Workbook C needs to be moved to Workbook C-2014 etc....
Is there a way to do this with a macro? Preferably I would like to do this automaticly - i.e. runing the macro from a master file that
1. Opens Workbook A copies the worksheets
2. Open Workbook A-2014 paste the sheets
3. Save and close Workbook A-2014
4. Close workbook A without saving
then doing the same for Workbook B, etc.
Basically the main workbook opens 2 files at a time performs a calculate in the main workbook and then copies and pastes information in 3 ranges. Then closes the two open workbooks and loops and performs same operations until it hits the maximum loops. My macro is as follows and I have 3 question in capital letters.
View 3 Replies View RelatedThe number of rows you are pasting and then you can select that same number of existing rows and use "insert". This is what I'm trying to achieve:
(before paste)
A
B
C
(after pasting unknown number of rows)
1
2
...
n
A
B
C
Is there really no built-in way to do this?
I've got a workbook for every department which is used to make a weekly status. Each of these workbooks contains a sheet with the 'weekly statuses over time', i.e. a table showing the weekly status for the department for week 1, week 2, week 3 etc. I've attached the file to make it easier to understand what I'm talking about, see Weekly_Test. Currently I can only see the performance of each department but I would like to be able to see the total performance for all departments, i.e. have a 'Total workbook' where all the weekly statuses are summed up weekly.
In the Weekly_Test file you can see the code which is used to generate the 'weekly status' sheets (also inserted at the end of this post). All workbooks for the departments are the same, apart from the file name which is the name of the department and this does not change. The weekly status is generated in the following way:
In the sheet 'Indtastning' (data entry) you enter the data and the date. Then click 'Update'. The sheet is then copied to a new sheet with the date and all data is copied to the table in the 'his.status' sheet. Now, I would like to add some code so that when I click 'Update' the data which is copied to the table in the 'his.status' sheet is also copied to a similar table in the 'Total' workbook.
Dim indtastArk
Dim arkDato
Public Sub Opdater()
arkDato = Cells(1, 1)
OpretDatoArk
' nulStilIndtastning
overførTilStatus
End Sub
Private Sub OpretDatoArk()
Sheets("Indtastning").Activate
With ActiveSheet
.Cells.Select
Selection.Copy
End With
ActiveWorkbook.Sheets.Add Before:=Sheets(4)......................
I am trying to do a Vlookup between 2 workbooks. I've tried a couple different ways and none seem to be working.
From the inventory workbook I need the Stator and Rotor SN's, O.D. and I.D. only for the ones that have the Status "SHOP" to come up on the Comparison Workbook.
Attached is the two workbooks.
It is quite standard to create links between workbooks, and generally I do this by inserting an "=" sign in the cell I want data to appear in for Workbook 1, I then open workbook 2 where the desired data is and click on the cell housing the data I want.
I just went to do this, and upon putting the = sign in the cell I want in workbook 1 and clicking in workbook 2 nothing happens except my cursor is now in workbook 2 and the = sign just remains alone in the workbook 1 cell.
If, however, I put an = sign in a cell in workbook on and then click another cell in that sheet or a cell in another worksheet but in the same workbook a proper link is created, so the problem seems to be isolated to links to other workbooks.
If you are working in an excel spreadsheet that is linked to other excel files, when you double click on the cell that is linked to another workbook, it immediately opens the linked workbook if your settings are correct. How do you change your settings to enable this functionality?
View 2 Replies View Related