Find Furthest Right Cell/column With Data
Jun 29, 2006
Sheet2 has columns with dates as headings. I add data under each date as appropriate. I would like a summary page for Sheet1 that contains only the most recent column data from Sheet2 (and other sheets, of course). For instance, if I have dates for columns A-E on Sheet2, but only A and B have data under them, I would like Sheet1 to contain the data in Sheet2!B, but not Sheet2!A because that is old data. Sheet1 will only contain the most recent data while sheets 2 through "n" will have historical data. Attached is an example of what I mean...
View 5 Replies
ADVERTISEMENT
Nov 11, 2011
I have a register of items that sometimes get updated, the register is stored as
From row 9:how ever many hundreds of items we have
Columns A:E
Data about the item that does not change with new revisions
Column F
Current Revision
Columns G:Z
Revisions in order (ie if there had been 8 revisions
'-, A, B, C, D, E, F, G) (with higher revisions left blank)
each of which is hyperlinked to the relevant file for that revision.
What I would like is a formula in Column F that will print
1) the letter of the highest revision (Revisions are always sequential)
2) Will hyperlink the column F to the correct revision...
I used to know how to do the first half of this formula but the spreadsheet got tinkered with and now I can't remember how to do it.
View 3 Replies
View Related
Sep 28, 2008
How do I make a cell value update to equal the furthest value to the right in the same row?
This cell just needs to look along the right in its own row and grab the value furthest away to the right. It will be a letter value, not a number. eg, AB or AC or AD or AE. It will not (in this case) need to look further than about 150 columns or cells.
View 9 Replies
View Related
May 2, 2012
I have 5 cells that data will be entered into:
1. AA6 2.AJ6 3.AS6 4.BB6 5.BK6
I'd like a formula that will return the value in the cell that was at the furthest point in the sequence above that wasn't a blank, so
if aa6=1, aj6=2, as6 was blank,bb6=3 it would return 3
if aa6=1, aj6= 2 and the rest were blank it would return 2 (the value in aj6)
View 2 Replies
View Related
Jul 20, 2014
I need to write a conditional formula that will look up in a 2nd worksheet the last coloumn with data (note that there will be some coloumns in the row that will have data and some that will be blank, I need the last column for that specific row to be the return result)
View 9 Replies
View Related
Nov 5, 2006
I need to write entries into an open spreadsheet with data input on a userform.
i need to use the xlup facility to find the last used row in the spreadsheet, select the next line and then enter the data, but how to return to VBA the actual cell reference that has been selected after doing the xlup and down one row. I need to be able a total potential 31 rows of data from the userform.
View 5 Replies
View Related
Dec 13, 2013
I have two work sheets I'm using. Sheet1!A column contains a list of customer names like "Smith, John".
Sheet2!A contains the same list of name with additional information found in the row. For example, you will find "Smith, John" in Sheet2!A3 and John's phone number in Sheet2!B3
In Sheet1!B it to find the associated telephone number based on matching criteria from Sheet1!A and Sheet2!A
For example, Sheet2 has the following data.
[Code] ....
On Sheet1 I have the following names. You'll notice some of the names repeat.
[Code] ......
In column Sheet1!B I would like it to scan column A from sheet2 and display the data show in column B. So it would look like this-
[Code] ....
You'll notice some names repeat but it always displays the correct number from Sheet2.
View 5 Replies
View Related
Apr 20, 2006
I have a userform that I am using to populate a column with data. I have the following code to find the next blank cell on the first row to enter the data from the first textbox in the userform
ActiveSheet.Range("av1").End(xlToLeft).Offset(0, 1).Value = TextBox1
I was then going to populate the rest of the cells in the column by changing the range "A1" to "A2" and so on. The problem I have is that not all of the cells have a compulsory entry so when the end(xlToLeft) function may not always end in the same column and the data will be staggered.
First Entry
A B C D E
1X
2X
3X
4
5X
Second Entry
A B C D E
1XY
2XY
3XY
4Y
5XY
What I want to do is find the first blank cell in the first row, as that will have a compulsory entry, and then fill the rest of the cells in the same column. So if the first blank cell is D1 i want to go down then D2,D3,D4 etc.
I can do it going across the rows but cannot figure it out using columns.
View 4 Replies
View Related
Oct 14, 2013
I am trying to find the last cell with data in a spreadsheet once this has been found select all up upto cell A4 and then format these cells into number format to zero decimal places so far I have the following which finds the last cell:
LR = Cells(Rows.Count, "A").End(xlUp).Row
Range(Cells(LR, 1), Cells(LR, "A")).Select
View 1 Replies
View Related
Jun 18, 2008
i have is 3 sheets in the same excel document. Sheet 1 is the mater sheet, which is a compilation of sheets 2 and 3, however the sheet layouts are different.
The sheets consist of a list of names and details. Sheet 1 has all the names in the list, however sheet 2 and 3 only have partial lists that are in a different order from the original list. The details listed next to the names in sheets 2 and 3 are different and hence a straight forward row copy and paste will not work.
What i need is to write a vba script that can take the name from the master list, search sheets 2 and 3 for the name and lookup the variables placed in next to the name, then update the master sheet accordingly, then continue to the next name on the master sheet and do the update again, and so on until all is updated. I have already thought about using lookup functions in excel however there is 1000 names on the list and around 60 details so it would be messy.
View 6 Replies
View Related
Dec 12, 2013
I have a table with the follow values (simplified version): A1:E1 have text headers B1:E1 have formulas to pull in text values. Some are blank. Some have repeat values. F1 has the value I want to look up. I need F2 to look at A2:E2 and compare to F1. It needs to pull in the corresponding A1:E1 value for the furthest to the right A2:E2 value.
Example:
Column A B C D E F
Row 1 Jan Feb Mar Apr May Imp1
Row 2 [blank] Imp1 Imp2 [blank] Imp1
F2 should return "May" as a value.
Screen shot attached.
screenshot.png
View 12 Replies
View Related
Mar 28, 2014
I need to find the data in the sheet SKU & match it to the data in import_215 column F if it matches then delete the entire row (see Attachment SKU3)
View 12 Replies
View Related
Aug 6, 2009
Please see the attached sheet. I have columns B through a lot (B through O in my oversimplified example). In every 7th row in each of these columns there is either a 1 or a blank/zero. I need to multiply that 7th number by the Quantity in column A, to achieve a total (ie the sum of each result of 7th cell*quantity) for each column in the bottom row, labeled "Totals".
In the actual version of my sheet, there are far too many rows to select everything manually. I've been fiddling with combinations of COUNTIF/COUNTA and OFFSET, but I haven't come up with a way to check for the 1 in every 7th row, THEN multiply that 1 by the quantity in column A, THEN add up the results for each column. As you can see, there are 1's elsewhere in the columns that are irrelevant to this particular calculation, so something like LOOKUP would also have to look in every 7th cell and couldn't just look at the column as a whole.
If you can't provide an immediate solution, but can at least point me to a resource that would allow me to devise a way to isolate every 7th row (THAT part is the sticking point), I'll surely post the solution to my own thread with updated keywords if I need it.
View 8 Replies
View Related
Sep 2, 2007
I have a spreadsheet (XL2003) that calculates some price data based on a specific algorithm. The program then determines which price data meets a certain criteria and if met, will place the value in a column ( Column C in the example WS attached.) If criteria not met the cell is returned empty. Under certain settings, this column could have values in all rows (C9 to C27 in the example) but is usually just a specific consecutive list as in the example.
I have to transfer the calculated values to another spreadsheet so I want just these values to be initially transferred to a separate column (Col. H in the example WS.) from which they can easily be transferred later to the other spreadsheet. I need to figure a way for a macro to check in col. C (ie C9) and if there is a value in the cell, to transfer it to the next available cell in Col H (Starting with H9). The macro would then look at the next cell down in Col C (C10) and do the same routine until the last cell is reached. The transferred data would then end up in consecutive cells in Col. H. I have shown in the example attached how I would want the data to look after the macro is run. I figured this is some type of loop but could not see any examples in the forum that would do what I need.
View 2 Replies
View Related
Aug 7, 2013
A
B
1
Name
Action
2
Joe
Created
3
Bob
Approved
4
Cindy
5
Jane
6
Dave
7
View 1 Replies
View Related
May 24, 2008
I have an excel sheet I am working on and in columns F1:F2000 I have an IF statment, I need to be able to add more "IF"s to it but I will exceed the 1024 char limit. Is there a way I can put this formula into VB as a function called DocumentType() and then in excel F1:F2000 =DocumentType()?
Is it as simple as:
Function DocumentType()
If(...........)
End Function
View 4 Replies
View Related
Sep 29, 2009
The foloowing is a column in my worksheet:
Sheet1A1WIRE CODE210PN90J310PN90K4510PN90HA610PN90J710PN90K810PNJ7#1DB91010PNJ9#86DRN1110PNJ9#86GN1210PNJ9#86YL1310PNJ9#87DRN1410PNJ9#87GN1510PNJ9#87YL161710PNJ9#85DRN1810PNJ9#85GNExcel 2003
you can see that A4,A9 and A16 are blank,
what i need is a code which will find out until which row in column A has data and should enter that row number in cell B2.
For eg in above sheet after running the code i get "18" in B2.
View 9 Replies
View Related
Jun 1, 2008
i want a formula that takes a value from the 3rd to last" column to the left of the last column but the last column is not static. so 1) i need to find the last column. and then 2) i need to take a value from the column 3 columns to the left of the last column. how do i do that using excel formulas?
View 3 Replies
View Related
Apr 30, 2012
I have data in column C and Blank columns in D to F
I want to find the last row of data in column C then put an"x" in the same row in columns D,E and F
I am using
Range("C" & Cells.Rows.Count).End(xlUp).Select
to select the last row in column C but how do I go from there.
View 4 Replies
View Related
Nov 29, 2007
I am unsure how to go about this....
View 9 Replies
View Related
Jun 4, 2008
If I have columns A-F and the 1st time a number appears in that row I want to know the column number, so if the first time a number appears in column 'C' I want it to return 3.
View 9 Replies
View Related
May 30, 2009
I was wondering if it is possible to perform a find and replace which would replace data from another column. We have a lot of data fields of our inventory that we exported which we are trying to condense for another program.
Example: I have a description column (AV) that has [[Manufacturer]] within the description. We want to find [[Manufacturer]] and replace with our data column (DD).
This is the data that has our manufacturers name in it. We have several find and replaces to do within the description column besides the above field.
View 9 Replies
View Related
Jan 14, 2013
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
View 8 Replies
View Related
May 27, 2014
There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
View 3 Replies
View Related
May 23, 2014
file storage
1. Look at the "Days so far" section
2. Ignore cell C1
3. All the other cells in that row are shaded blue. Look at these.
4. Look at the "Volunteer" row - all the cells in that row are shaded blue. Look at these.
5. Wherever a name - any name - appears in the "Volunteer" row, 1 is added to the previous number in the "Days so far" section and the result is displayed in cell from the "Days so far" row above that Volunteer's name.
6. For example, we begin in C1 with a count of 12 days so far - this was manually entered
7. In cell H5, we see Henry has volunteered 1 day. The total no. of days so far should now be 12+1. Therefore, the number in H1 should be 13.
8. In cell G47, we see Joseph has volunteered 1 day. The total number of days volunteered BEFORE Joseph volunteered is 15 (see cell D43). But now, with Joseph volunteering 1 day, the total no. of days so far should now be 15+1. Therefore, the number in G43 should be 16.
9. what formula l must put in the "Days so far" row (excluding cell C1, which is manually input) to give me the "should be" results predicted in that row? I'm guessing it will be a formula which looks at each row fragment of the "Days so far" row, row by row, right up to the previous cell in that row, all within one formula.
P.S. I just want to leave the "Days so far" row blank, for any columns where there are no volunteers in the "Volunteer" row, so please don't give a formula which inserts zero for days with no volunteer, and then sums the cumulative total.
View 5 Replies
View Related
May 21, 2008
how to explain this except by showing it, so I explained it as best I could in the attachment. Anyone think they have a solution for this? Let me know if you need more information. Thanks!
the macro will look at the value I entered in cell A1, then find all instances of it in Column A
in every row that A1 matches, if the value in column E is "0", I need the macro to change the value in column E of that row from "0" to (that row's column B * $B$1)
View 7 Replies
View Related
Jun 10, 2008
I have a drop down list in a merged cell B12-F12 and B13-F13 and B14-F14 . . . B30-F30.
I need the adjacent merged cell to populate a reason (text) based on the text answer in the drop down list or the entered text in the first merged cell. For example in the cell B12-F12 the user picks from the list or types in "Amiodarone." I want the adjacent merged cell G12-J12to automatically fill with "Heart Rhythm." I also want to be able to set up multiple if - them statements like if Amiodarone is entered then fill adjacent cell with Heart Rhythm and if Toprol XL then fill adjacent cell with Heart / Blood pressure and if simvastatin then fill adjacent cell with Cholesterol, etc. I have about 30 different options for cell 1 that I want to have auto fill in cell 2 based on the contents of cell 1. I've attached my file.
I want the user to be able to choose from the list or type the drug name in.
View 8 Replies
View Related
Jul 10, 2014
I have attached a file to make this easier. Basically I would like to search "Points Scored" (B2:W9) for the highest score (which I already have done) and when it is found return the team's name that is associated with it. Then do this for the second, third, etc. as it can be seen in the "Main" sheet. I'm thinking an index/find approach, but I just keep getting "N/A".
View 7 Replies
View Related
Oct 26, 2011
I need to find the last row of data where there is data in Column F. I then need to select from that row the cells that pertain to A, B, C, D, E, F, G, H, I, J, K, L, & M and then be able to make format changes like increase font size.
I also then want to select A in that same row and put the word Total.
View 1 Replies
View Related
Apr 2, 2009
I would like to know how to find the last column and last cell in the worksheet.
View 3 Replies
View Related
