I need to find the last row of data where there is data in Column F. I then need to select from that row the cells that pertain to A, B, C, D, E, F, G, H, I, J, K, L, & M and then be able to make format changes like increase font size.
I also then want to select A in that same row and put the word Total.
I am trying to find the last cell with data in a spreadsheet once this has been found select all up upto cell A4 and then format these cells into number format to zero decimal places so far I have the following which finds the last cell:
LR = Cells(Rows.Count, "A").End(xlUp).Row
Range(Cells(LR, 1), Cells(LR, "A")).Select
I have the text value "Ball, Red" somewhere in column A. I don't know which row it's in because it will never be in the same row twice. I need a macro to find this value, then, copy that whole row and "insert copied cells" right below that row and change the value in the newly created cell from "Ball, Red" to "Red, Ball".
I tried macro recorder to do this and had no luck...
Cells.Find(what:="Ball, Red", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlToRight)).Select
Selection.Copy
Range("A21").Select
Selection.Insert Shift:=xlDown
Range(Selection, Selection.End(xlToLeft)).Select
Range(Selection, Selection.End(xlToLeft)).Select
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = "Red, Ball"
Range("A22").Select
That's is all there is to it on this one.
I have 2 date values in excel spreadsheet ( i must use it by the sheet) and i want to flter table by the date column and AutoFilter, when the start date and the end date will be taken from the sheet itself.
but when i defined date variable like starta and edit the filter (Criteria1:=">=starta") it didt work (the value was starta and not the date in the starta) how to edit it?
sub abcd
Dim starta As Date, enda As Date
starta = Worksheets("periods and options").Range("a1").Value
enda = Worksheets("periods and options").Range("b1").Value
Sheets("DATAF").Range("a1:p1325").Select
Selection.AutoFilter Field:=1, Criteria1:=">=starta", Operator:=xlAnd _
, Criteria2:="
Is there a way to make multiple charts off of 1 big data sheet. Sounds easy but there is more.
Sheet name is Field
Column A is Name ( about 40 different names)
Column B is Date (x axis primary and secondary)
Column D is Oil (y primary axis)
Column G is Water (y primary axis)
Column E is Gas ( y secondary axis)
Column M is MCFE (y secondary axis)
There is about 2-3 thousand rows, updated monthly. I need to make a graph by each well name.
1) can I make multiple graphs that can just look at the "field" sheet and then breakout just the 1 well name that shows up on the chart sheet that I create
I've tried pivot charts but you can't have secondary acess because it resets every time.
Basically, make multiple charts that will graph the data of a specific name in column A
I have a spreadsheet on sheet 1 with a list of customers and their information. So on column A I have the customer number (i.e. k968, e37, p528,...), on column B i have the customer's name, on column C the street's name, on Column D the house number, on column E the zip code and finally the city on column F.
Right now there are around 600 customers in this list.
I have made a userform with a combobox in which I want to select an existing customer (pulled from the spreadsheet). On the same userform I have textboxes (customer number, name, street, number, zip, city). When I select a customer in the combobox, I want this customer's info to show up in the textboxes. I want to be able to change the info and hit Next to store the changes in the spreadsheet. When I do not select a customer from the combobox, I want to add new info in the textboxes and hit Next to store this info as a new customer. The userform also has a delete button. Then I select a customer in the combobox, this customer (and it's info) should be deleted from the spreadsheet when i hit Delete. So the spreadsheet is variable in length.
I need to find the data in the sheet SKU & match it to the data in import_215 column F if it matches then delete the entire row (see Attachment SKU3)
View 12 Replies View RelatedI would like to make a macro to format all my cells.
I need it to format my last digit to superscrift IF there is 4 digit after decimal point.
How to do this?
I have =(D4-C4)<40 (if the difference is 40 or less then color the font orange) but if the difference is 0 or a negative, I need it to do nothing. I don't know how to do the nothing part. I tried using the IF but couldn't figure out how to make the true format the color
View 5 Replies View RelatedI like to make my numbers with no decimals, with a comma. This means I have to constantly press a number of buttons to put them in the format I want. Not too big a deal but is there a way I can make one of the buttons in the number group default to the way I want the numbers to appear?
View 9 Replies View RelatedIn Text to Columns, is it possible to set the default column data format to TEXT?
View 1 Replies View RelatedI have a spreadsheet (XL2003) that calculates some price data based on a specific algorithm. The program then determines which price data meets a certain criteria and if met, will place the value in a column ( Column C in the example WS attached.) If criteria not met the cell is returned empty. Under certain settings, this column could have values in all rows (C9 to C27 in the example) but is usually just a specific consecutive list as in the example.
I have to transfer the calculated values to another spreadsheet so I want just these values to be initially transferred to a separate column (Col. H in the example WS.) from which they can easily be transferred later to the other spreadsheet. I need to figure a way for a macro to check in col. C (ie C9) and if there is a value in the cell, to transfer it to the next available cell in Col H (Starting with H9). The macro would then look at the next cell down in Col C (C10) and do the same routine until the last cell is reached. The transferred data would then end up in consecutive cells in Col. H. I have shown in the example attached how I would want the data to look after the macro is run. I figured this is some type of loop but could not see any examples in the forum that would do what I need.
I'm trying to use this Find Method and combine it with a countif or loop. Something that will count a number of occurences of a unique type of character. I'm looking to find all "F" characters in Bold, Italic and Size 16. Here's my find code that I'm trying to use. I can get it to work by itself but not along with a countif or loop.
Sub count_4()
Dim r As Range
Set r = Range("A1:A6")
With Application.FindFormat.Font
.Bold = True
.Italic = True
.Size = 16
End With
r.Find(What:="F", LookIn:=xlValues, LookAt:=xlWhole, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, searchformat:=True, MatchCase:=True).Activate
End Sub
Wondering if it is possible to conditional format cells in "Jan"-"Dec" columns based on "Next" column data?
What I need is (lets say fill colour to differ) in one cell per row, based on latest input and "next" data.
Month Avg
Date
Jan
Feb
Mar
Apr
May
Jun
Jul
[code]......
So for example:
row2: May is latest input so need fill in cell +2("next" column data) from may. In this case July
row3: Feb is latest imput and "next" also 2. Result should be Apr
row8:May is latest input, "next" is 6. Res should be Nov.
Finally, only one cell per row to be highlighted so need to overwrite colour fill when new data input in a cell already colour filled.
The foloowing is a column in my worksheet:
Sheet1A1WIRE CODE210PN90J310PN90K4510PN90HA610PN90J710PN90K810PNJ7#1DB91010PNJ9#86DRN1110PNJ9#86GN1210PNJ9#86YL1310PNJ9#87DRN1410PNJ9#87GN1510PNJ9#87YL161710PNJ9#85DRN1810PNJ9#85GNExcel 2003
you can see that A4,A9 and A16 are blank,
what i need is a code which will find out until which row in column A has data and should enter that row number in cell B2.
For eg in above sheet after running the code i get "18" in B2.
i want a formula that takes a value from the 3rd to last" column to the left of the last column but the last column is not static. so 1) i need to find the last column. and then 2) i need to take a value from the column 3 columns to the left of the last column. how do i do that using excel formulas?
View 3 Replies View RelatedI have data in column C and Blank columns in D to F
I want to find the last row of data in column C then put an"x" in the same row in columns D,E and F
I am using
Range("C" & Cells.Rows.Count).End(xlUp).Select
to select the last row in column C but how do I go from there.
I am unsure how to go about this....
View 9 Replies View RelatedIf I have columns A-F and the 1st time a number appears in that row I want to know the column number, so if the first time a number appears in column 'C' I want it to return 3.
View 9 Replies View RelatedI was wondering if it is possible to perform a find and replace which would replace data from another column. We have a lot of data fields of our inventory that we exported which we are trying to condense for another program.
Example: I have a description column (AV) that has [[Manufacturer]] within the description. We want to find [[Manufacturer]] and replace with our data column (DD).
This is the data that has our manufacturers name in it. We have several find and replaces to do within the description column besides the above field.
I've got a table of different values in column A.
I'd like the cell D2 ("order") to show up at column B next to the closest value of 35.00 of column A.
Consequently, how to make "order" meet the closest several value of 35.00?
I've attached a xlxs file with more detailed description.
Ex_closest_11_05.xlsx‎
There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
I have attached a file to make this easier. Basically I would like to search "Points Scored" (B2:W9) for the highest score (which I already have done) and when it is found return the team's name that is associated with it. Then do this for the second, third, etc. as it can be seen in the "Main" sheet. I'm thinking an index/find approach, but I just keep getting "N/A".
View 7 Replies View RelatedI need to write a conditional formula that will look up in a 2nd worksheet the last coloumn with data (note that there will be some coloumns in the row that will have data and some that will be blank, I need the last column for that specific row to be the return result)
View 9 Replies View RelatedSheet2 has columns with dates as headings. I add data under each date as appropriate. I would like a summary page for Sheet1 that contains only the most recent column data from Sheet2 (and other sheets, of course). For instance, if I have dates for columns A-E on Sheet2, but only A and B have data under them, I would like Sheet1 to contain the data in Sheet2!B, but not Sheet2!A because that is old data. Sheet1 will only contain the most recent data while sheets 2 through "n" will have historical data. Attached is an example of what I mean...
View 5 Replies View RelatedI need to write entries into an open spreadsheet with data input on a userform.
i need to use the xlup facility to find the last used row in the spreadsheet, select the next line and then enter the data, but how to return to VBA the actual cell reference that has been selected after doing the xlup and down one row. I need to be able a total potential 31 rows of data from the userform.
Formula for this? If a cell in column T is empty, use column U (but make it negative)??
View 2 Replies View RelatedI have a column of cells with values - 0.2%, 0.32%, 0.22, 0.5 etc. The cells with % symbol are in ' Percentage, 2 decimal' format while the plain numbers are in 'General' format i.e. column contains cells in either of these formats. I need a macro where I can specify the column and it will select the cells with the % format, convert it to 'General' and multiply the result by 100 eg. 0.2% converted to 'General' becomes 0.002. When multiplied by 100, result is 0.2 i.e. is displayed without the % symbol.
View 7 Replies View RelatedI have two work sheets I'm using. Sheet1!A column contains a list of customer names like "Smith, John".
Sheet2!A contains the same list of name with additional information found in the row. For example, you will find "Smith, John" in Sheet2!A3 and John's phone number in Sheet2!B3
In Sheet1!B it to find the associated telephone number based on matching criteria from Sheet1!A and Sheet2!A
For example, Sheet2 has the following data.
[Code] ....
On Sheet1 I have the following names. You'll notice some of the names repeat.
[Code] ......
In column Sheet1!B I would like it to scan column A from sheet2 and display the data show in column B. So it would look like this-
[Code] ....
You'll notice some names repeat but it always displays the correct number from Sheet2.
I've been trying to modify the following code to find the value "Module Index" in column A. I then need the code to save the row number that the value was found in and copy a range from ("A2:V row number")
I keep getting an "object required" error on the following code line
Set intFindrow = wbTargetBook.Sheets(strName).Range("A:A").Find(What:="Module Index", LookIn:=xlValues)
[Code] .....
