I am trying to find the first and last names of people in a cell. I have a userform to get their first and last names separately. I am trying to run a VBA macro to determine if each cell in a column contains both first and last names, and then put a "Y" in an adjacent column. The Code I have is as follows:
View 5 RepliesI've created a file that uses three different variable to poll up people's names that are available for the task. I've got it to work using long formulas, containing if, index, match, etc. It's working well, but I think that the spreedsheet will become difficult to maintain (delete or add people to). I'm looking for a way to simplify my code, so that it won't be as time consuming to edit.
View 2 Replies View RelatedI have 10 columns that are as follows. Name, rank 04, name, rank 05, name, rank 06, name, rank 07, name, rank 08. The longest name and rank list is over 1200 names long. What I need to do is create 1, 3, and 5 year averages based on rank.
My question is, is there a way to sort alphabetically that will automatically align column a,c,e,g,and i alphabetically that will also align each row by name.
example:
name 04 05 06
joe 75 72
paul 82
carl 72 48
Joe isn't present in 05, Paul isn't present in 04 or 06, and Carl isn't present in 06.
Basically I need excel to add blank cells for people not on each years list so all names align.
I have a query where I am trying to find out how many people passed in green, amber and red from a series of data. I know (from the attached file) how to find out how many greens, ambers and reds there were, but how can I find out how many of the 7 in cell B12 passed in Green?
View 2 Replies View Relatedto create a macro to send emails.
1. Attached is an excel spreadsheet. In column A, each time the word total is seen, i want an email to be sent to to someone with the total in colum E.
Eg.
A B C D E
UAFEQ1 TOTAL xxxx xxxxxxxx xxx R 15 000
ALPROP TOTAL xxxx xxxxxxxxx xxx -R 20 000
For UAFEQ1 TOTAL I would like a mail to be sent to john@example.com
For ALRPOP TOTAL I want like a mail to be sent to peter@example.com
If the total in column E is positive i want the mail to say:
Please see deposit of R 15 000
If the total in colum E is negative i want the mail to say:
Please see withdrawal of -R 20 000
The currency is Rands (South Africa)
Sometimes, i need to send 20 or more e-mails. And these can repeat themselves so, there may be two totals for UAFEQ1 TOTAL and a mail must be sent each time. See attached as an example.
The macro can stop when Grand Total is reached. No email needs to be sent for the grand total.
Is there any way to find out how many people are scheduled between certain time ranges.
For example : I have 5 people scheduled with various start and finish times ie.:
1. 10:00 to 15:00
2. 11:00 to 16:00
3. 08:00 to 14:00
4. 13:00 to 15:00
5. 12:00 to 16:00
Is there any way to analise this schedule in format:
08:00 till 9:00 1 scheduled
09:00 till 10:00 1 scheduled
10:00 till 11:00 2 scheduled
11:00 till 12:00 3 scheduled
12:00 till 13:00 4 scheduled
13:00 till 14:00 5 scheduled
14:00 till 15:00 4 scheduled
15:00 till 16:00 2 scheduled
16:00 till 17:00 0 scheduled
In cells A4 to A54, their names are displayed.
In cells I4 to I54, their total sales are displayed.
Starting in cell B59 and C59 I'd like to display their name and sales respectively.
Also in column I I'd have a second value which would be a total of each department. Would it be possible to leave this data out of the formula? No big deal if I have to put that value in the next column.
DSee the attached.
The current spreadsheets add up each persons totals by matching the name in each tab with the name of the person who won the job located in current orders tab.
BUT.....If two salesman pair up on up on a job then the formula doesn't recognise the joint name. eg Gary/paul in row 69 (current orders).
I need the totals to half the job and add it to the salesmans total accordingly. There is no 'Paul Tab' as he is our MD and doesnt have a target.
I have a worksheet with many tables that I use in formulas.
I like tables for a couple reasons, one being the ability to insert/delete rows without affecting the rest of that worksheet row.
Also, automatic copy of formulas/formatting is great.
But, what I really like about tables is the ability to use the naming conventions in formulas.
Problem is when I save this worksheet, after I close it and open it back up, all table references in my formulas have been converted to cell references.
Example:
Code:
=IF((SUMIF('Quote 1'!$M$28:$M$43,">"&'Quote 1'!$J$57:$J$60)*'Quote 1'!$G$57:$G$60)+(COUNTIF('Quote 1'!$M$28:$M$43,""&'Quote 1'!$J$57:$J$60)*'Quote 1'!$G$57:$G$60)+(COUNTIF('Quote 1'!$M$28:$M$43,""&tblOSSRV[Min Order Cost])*tblOSSRV[Cost / Part])+(COUNTIF(tblFam[[#Data],[Qty by Factor2]],""&tblOSSRV[Min Parts Per Line])*tblOSSRV[Cost / Part])+(COUNTIF(tblFam[[#Data],[Qty by Factor2]],"
I have a list of 900 names in excel and I need to find certain individuals by last name. I can get a list of each person I need to find...lets say 20 last names. These names are in the 900 but I would need to use the find feature and look one up at a time and this will take forever.
Let’s say sheet one has the 900 names and sheet two has the 20 names. Can I find the 20 names in sheet one quickly or do I have to use the find feature to search one person at a time on the first sheet with 900 names?
I am trying to write some code that will look up a value in a range of cells and copy the names in column A to another sheet.
I have attached a sample sheet which I hope explains what i am trying to achieve more clearly.
I am looking to create a code that searchs a column to see if there is word similar to the input (As in it's the same part name with a missing or extra letter or a space), and then return the first matched word.
View 6 Replies View RelatedReference the attached excel audit example. Column F highlighted in Yellow is finding the difference between "Authorized Post Allow" D9 "Post Allowance" B9 . The Column location of the two Columns changes on each audit. This means I have to manually fix the formula in Column F every time. Is there a formula that would find the difference between these two columns based on their names "Post Allowance" and "Authorized Post Allow" preventing me from manully fixing the formula.
View 2 Replies View RelatedI have a table with names of employees in Column A, the data for each employee is written in columns B, C and D.
I'd like to be able to type in this data in cells E12-E14 and have Excel bring up all of the names in the table that are associated with this data, and preferably separate them with commas.
I'm working with Excel 2007, without VBA/Marcros.
Please see the example file: find_name_example.xlsx
I have this data set,
A
B
C
D
E
1
mzi
2
5
6
12
[Code].....
I have this macro below written. It isn't working for me and I am trying to figure out how to write it. Basically, the macro is supposed to go to the test.xls workbook and then look at names in row 4, from there it will take each name and search for it on the all csrs new.xls workbook and then move over to the right 5 times and copy data and paste 1 down from the name on the test.xls workbook. One workbook has the names going to the right and the other workbook has the names going down....
View 9 Replies View RelatedIdentical Data exists on Sheets1 and 2 (A3:V50)
A3:A50 = human names
B3:V50 = numeric values
I'm trying to VBA code:
If human names on Sheet2(A3:A5) match human names on Sheet1(A3:A5)
Move Sheet2 matching name row(s) to the bottom of the data range on Sheet2.
Sheet1
Sam 4 4 4 4 4 4 4 4 4 36 4 4 4 4 4 4 4 4 4 36 72
Bill 4 4 4 5 4 4 4 5 4 38 5 5 4 4 4 4 4 4 4 38 76
Bob 5 5 5 4 4 4 5 5 5 42 4 4 4 4 4 4 4 4 4 36 78
[Code] ......
How can I write a piece of code to initialise an array with all the worksheet names. I cannot be sure how many worksheets will be in the file as it generates different numbers each time.
I used to just declare with sheet names, but I can no longer do that.
arrVals = Array("Subnets1", "Subnets2")
I need a macro that will look for a specific text string in the tab names of the workbook and replace it with a new specified text string (leaving the rest of the existing tab names). In other words, a simple find/replace but applied to all tab names in the workbook rather than cells. Ideally, I'd like it to pop up something and ask for the text to find and the text to replace it with, so I don't have to edit the macro itself each time I want to use it, but editing the macro each time is fine. Either way will be wonderful.
View 9 Replies View RelatedIn column G of my excel 2003 worksheet named: Data, I have a list of people's first names. These names were extracted from an external database.
Some of the first names actually contain peoples second names or partner's names.
Example:
John & Jill
James and Sue
Kerrie-Anne
Joanna Lyn
I need a macro to please delete people's second name.
So in the example above I need to keep all names that are joined by: & or and or - (such as John & Jill, James and Sue, Kerrie-Anne).
Also, in the example above I need to delete all names that are joined by a <space> (such as Joanna Lyn).
It runs fine for me, but when others (who are using Excel 2003) try to run it, it won't fire. The second macro entitled "Delete Foothill" runs fine though. "Run Foothill won't fire.
Sub Run_Foothill()
Sheets("Foothill Plaza (Weekly Call)").Unprotect Password:="Foothill"
'
' Run_Foothill Macro
'
'
Sheets("OC").Select
Range("B37:C44").Select
Selection.Copy
Sheets("Foothill Plaza (Weekly Call)").Select
Range("B4").Select
ActiveSheet.Paste
Range("A12").Select
Application.CutCopyMode = False
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
Selection.Borders(xlEdgeLeft).LineStyle = xlNone
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.ColorIndex = 0
.TintAndShade = 0
.Weight = xlMedium
End With
See attached.PMS 2.xlsx. I have a table with data on PMS sheet and would like to have something like the example on the Example sheet using data from the PMS sheet.
View 2 Replies View RelatedI have a list of people in column A and in B to E there are 4 numbers from 1 to 13. (Each person has 4 different numbers). In the next 24 columns are concatenations of these numbers in every order possible. On a separate sheet I have a list of concatenations of all possible combinations of numers 1 to 13 in groups of 4. e.g. 1234, 1235 etc. I have then counted how many times each of the concatnations from the first sheet appear. What I want to do is put the names of the people whoes concatentaions match the ones on the third sheet.
View 14 Replies View RelatedI am trying to do is create a document that will be available to sevaral people. The document will be edited by each person as needed. The completed document will then be used to order materials and supplies. What I want to hapen is each time the document is edited an alert is sent to the person responsible for the purchasing. I'm sure this is possible I just don't know how to do it.
View 14 Replies View RelatedI have 3 spreadsheets I combined into one,
They are voters for 3 separate occasions. I would like to filter out how many people have voted 2 times or 3. I have sorted the information with 2 columns "LASTNAME" and "FIRSTNAME"
Example:
LASTNAME FIRSTNAME
ABBOTTJANET
ABBOTTSTUART
ABBOTTJANET
ABBOTTSTUART
ABBOTTJANET
ABBOTTSTUART
These first 3 show up 3 times, so I would like to take all the info from row one and two to get all the info for Janet and Stu,
I have a sheet in which it is separated by zone area, name (about 200 names), and email. I am trying to add people to an email based on zone. For instance:
Nevada Billy Billy@gmail.com
California Sal Theemail@gmail.com
New York Jim Jim@gmail.com
Nevada JOe Joe@gmail.com
Arizona Alex Alex@gmail.com
So how can add all the people in X zone to a single outlook email (in this case Billy and Joe)?
I want to create a monthly rota for 8 people to cover monday to friday. Only one person per day and I need to put this in a calendar .
View 2 Replies View RelatedI have an excel workbook which is a result of a sports survey I conducted. It basically shows who likes which sport, what level they're at, preferred time of play, etc, and their email address.
A colleague has created a type of form (using formulas, not VBA) wherein you select your criteria (Sport, Gender, Level etc) and it displays the matching names.
What I'd like is to be able to select, via a check box or similar, 1 or more names from the list of results for that sport, click a button, and their addresses automatically open in a new Outlook mail window for the person to send a mail to those people.
how can you set up a workbook to display different sheets for different users depending upon what password they input to open the workbook? The manager should see all sheets but employees only data entry sheets.
View 9 Replies View RelatedI want to do is to count the number of people under each class, eg. 2300 - primary, 3 ppl, but i gt many many classes in my spreadsheet, do u all have solution for me using VBA
SAMPLE DATA:
2300 - primary
amy
ben
alex
1234 - secondary
Linda
tom
Jerry
Tricia
Mabel
5603 - advanced
Linda
tom
Jerry
Kevin
Calvin