I have a long list of data in a table. the first column is a date&machine. in another column there is a comment field. To find the first occurance of a date/machie and report the relavent coment I have been using a vlookup; this works well. Is there any way to find a second or third comment for the same date & machine?
View 2 RepliesIn the columns below B is just 95% of A. What I want to do in column C is to put the maximum value of B over the range that corresponds until the value in A is less than that. For example for my 1st run the value would be $1,125.68 because this is the maximum amount before you fall below that in column A, or in this case hits $1,106.40. I want to be able to perform this automatically down the line (expanding the range until the logic test is true) but can't figure out how to do this. The formula would basically be the max of the range in Column B is > Column A until this is not true, then return the max in Column B for entry in Column C. Then in Column D I would run an identical analysis but return the Row identifer for the dataset.
View 11 Replies View RelatedI have 2 columns of data in a report, the column on the right J has a text entry that can possibly occur 1 or 2 times in the list. If it occurs twice I want to find the second occurance and return what is in column A.
View 9 Replies View RelatedI have a list of names and numbers like:
name1 12
name2 114
name3 15
name1 13
name4 6
name3 16
etc etc
What i need is that, if I am entering name1 in cell AA1, then AB1 should show 13 (the number against the last occurance of name1), if it is name3..then the answer should be 16
On sheet 1 I have a column with a various people by their initials, (aa, bb, cc, etc.) Another column lists the completion date of their assignments, (5/28/07, etc.) Sheet 2 is a summary page. I want to count the number of assignments that "aa" has completed for the month of May on sheet 2. I tried =count(if(sheet! a1:a:50="aa")if(b1:b50>="5/1/07")) but I only got zeros.
View 9 Replies View RelatedI've been trying to solve this problem all afternoon and evening but cannot think how to do it. I'm a basic (very) VBA user and the best I could come up with is below.
I have a sheet called Data. In column A I have names, and in column B I have dates (day, month and year).
What I am trying to do is to filter the unique names that occur during the selected month and year (day is irrelevant) and then count the number of times that name appears in the selected time period.
This is what I have so far, but it's not working at all!
Sub countNamesMonth()
Dim rangeEnd As Long
Dim i, y, x
Dim cell As Range
rangeEnd = Cells(Sheets("Data").Rows.Count, "A").End(xlUp).Row
y = 2
x = 2
I would like to be able to find out what other spreadsheets rely on the spreadsheet I'm currently in.
For example spreadsheet A cell D1 links into spreadsheet C cell F1
So if I was in spreadsheet C I'd like to be able to run or do something that told me that cell F1 was used in spreadsheet A cell D1.
how to count the number of occurrences base on a criteria? My sample file contains a Tally Sheet and a template sheet...how can i count the number of occurrences of Yes and No per class? Say for the A class, how can i count the yes or no?
View 2 Replies View RelatedI looked for a long time through the past entries and couldn't find an answer for this specific situation. I have a spreadsheet with multiple occurances of names in column A
A
green
green
green
blue
blue
white
white
white
and in column D I need a total of how many occurances of that name there are. that total needs to be listed in that row for that name specifically. There are many names on there currently and many will be added via copy/paste from another spreadsheet so i need one formula to paste into each row to cover ALL recurring names. Basically i need to enter in column D "=COUNTIF(A:A,"a term that would total the reoccurance of each name from the A column the corresponding D cell")
A D
green 3
green 3
green 3
blue 2
blue 2
white 3
white 3
white 3
The goal is to be able to copy/paste new entries into the spreadsheet, sort them by name, and have them automatically update the totals in each row even if they are new names. i guess it would be a "number of occurance of each term" code to cover all terms.
The code below is supposed to find blank cells in column E on sheet3, copy some data from adjacent cells, create a string from that data and paste on sheet4 in Column J. I get duplicate data and or most blank cells? What the heck did I write.
View 4 Replies View Relatedhave a data set with client id and most dates of activity....
I would like to be able to include within a report the date of first activity and the most recent date of activity....
please see attached sample worksheet...
I have a report that gives me dates in a format that's mostly useless. I am sure there's a simple formula I can do each time I run the report, but I'm not sure. My report gives me dates like this...
View 4 Replies View Relatedin column A, i have a dates listed, in column G, the transaction amounts that correspond with those dates, i want to know how to run a report on this. what i need is to auto sum the amounts for a specific month without having to create a new spreadsheet for every month. IE - what are the sales for september? how do i do this?
View 2 Replies View RelatedI am trying out a new spreadsheet to log my cycling. I have attached the example so far. I am going to have a form appear and fill it out. Upon clicking 'Add' button I want a macro that will search column B (a list of dates) and match the date the users filled out on the form with the spreadsheet and then paste the corresponding form data in that row.
How would I accomplish this? Does the formatting of the date field complicate this since on the spreadsheet I display "Saturday 1/08" and on the form the user enters in "01/08/2008"
Average.xlsxHi
I have changed the attachment to use CSV's
I am trying to create a report that I can enter the codes I am looking for and the formula will search the sheets within the report and once the results are found then find the average of those results.
What I am trying to do is search the codes from Sheet 1 under Outlet and ESA(in Blue) in sheet A,B and C. The problem is the ESA code seen in column I of A,B,C is only used when column L is empty in A,B,C.
Once the relevant codes are found I then need to look for the KPI's seen in sheet 1 B4, B6 and B8, they can be found in A,B,C in column R. then the result comes from column S in A,B or C.
Once the result is found for each code I want to find the average of them, with the answer to populate in yellow in sheet 1
I want the formula to be able to handle more or less codes as well as adjust the formula so I can add more sheets(possible D,E,F,G etc)
I have a spreadsheet which is used for tracking work items for a team of people. On one sheet I have a column of dates and rows of named 'tasks' against them. I need to identify the first and last dates at which a 'task' is listed.
My spreadsheet is attached.
On sheet2 K2 I want to see the first / earliest date where 'Fish' occurs on sheet1
On sheet2 L2 I want to see the last / latest date where 'Fish' occurs on sheet1
I have tried using SUMPRODUCT MAX / MIN but I got myself in a muddle!!
TrackerRH.xlsx
I am trying to COUNTIF some data from a spreadsheet I have, where they have been entered after a certain date (which is part of the information). The problem I am having is that I am trying to enter the date I want as a variable in another field so that it can update the rest of the table.
Basically I have a field where it says "Calculate new business since" and then a date should be entered - in turn the formulas should make the calculations based on that date. Is this not possible?
I have attached a sample of my spreadsheet to use as a reference. I suggest you open that up and give it a look through to get an idea of what's going on.
What I'm looking for is a way to create a report (the quickest and easiest way of course, as always) which will give the total for the columns 'Exit Weight', 'Net Weight' and 'Entry Weight' sorted by each company between the periods of the 25th of each month to the 24th of the next month (the Dates are in Column A obviously)
Below is an example of the output I am looking for:
Company: Period: Exit Weight: Net Weight: Entry Weight:
EASTWELL HA.. 25/10/07-24/11/07 102.2 124.3 200.14
25/11/07-24/12/07 143.7 185.2 250.18
25/12/07-24/1/08 ... ... ...
BOURKE TRANS.. 25/10/07-.... ... ... ...
the totals for the Exit Weight, Net Weight and Entry Weight are not the actual totals, they were just put in to give you an idea of what I'm talking about.
And on and on. If there is a way to automate this with Excel VBA and some sort of code that you could give me to plug into my spreadsheet I would be very appreciative. I understand this is a bit complicated and would probably require a few steps so if don't get the answer I'm looking for I'll probably find a way to split it into steps and then ask the questions seperately.
I have 2 sheet in MS Excel (MATTER & REPORT) . Database included at sheet MATTER. Report will be seen on sheet REPORT based on entry date. What formula used to produce report automatically.
View 4 Replies View RelatedI am looking for code that can generate the report that a user selects.
For example the user clicks reports on the userform. The report userform opens up. The user checks the monthly report button and enters the last day of the month he wishes the report to be for. i.e 7/31/2010 and then clicks generate report. when executed excel creates a new workbook and creates two sheets. the first looks exactly like the master data sheet from the original worksheet but of course with the specified data. the second sheet will populate a summary of the data. I will address that after i figure out how to get the first sheet compiled.
I am trying to loop through some data in Column B and I want it to report on ALL values that are < todays date. However the loop is stopping at the first date that is less and not continuing on afterwards. I know what is causing this but I am unsure how to solve it.
View 2 Replies View RelatedI have a workbook with 12 sheets for monthly results and a Year to Date sheet. For presentation reasons, the monthly results are listed as seen in the first three worksheets, but I want the YTD results to be structured as seen in the fourth worksheet. I have shown how I am currently achieving this in the "Call" section of the YTD sheet, but as there are 12 months and many more variables in the original workbook, I'm wondering if there is any easier way than the one I'm using.
View 4 Replies View RelatedFor example
Name Address Phone # zip
Danielle 4561
Danielle 9852
Danielle 22
Danielle 69
Joe 895
Joe 28
John 9821
John 1114
John 698
Say I did a search for Joe. I want to report back all the addresses in which he resided but there's no way to tell how many rows of data each person has. Joe has 2 rows, Danielle has 4 rows and John has three. How do I report back all the relevant rows?
Please see attached spreadsheet on what I am trying to achieve.
In the data tab I have my base data, which is dates across the top and names down the side. I have information in the middle such as 'H8' which means that the person was on holiday for 8 hours on that particular day, and 'S8' which means they were sick for 8 hours on that day.
I want a macro that will rearrange the information in the table and put it into the report format which is in the report sheet.
If you see the spreadsheet you will probably get a better idea of what I am trying to achieve.
I have a pivot table with the following items;
Report Filter = Project Names & Dates (filtered on 2 fields)
then the pivot table of data shows
Dept, Sum of Hours, Sum of Total ($), Sum of Days
When you click on the drop down to adjust the filter for the Date it gives you the whole list of dates, day by day as it is in the source data.
Is there a way to make it in the filter by month and year, the way it would in an ordinary filter. So if I wanted to have the pivot table show only the values with an October date I can, rather than having to deselect all and then individually check the boxes for the 1st through to the 31st of October.?
I have looked through the forum and found pits and peices but can not put the puzzle together. Found the VBA code in my example from a earlier post but there was no final answer to the post.
Trying to have the user put in a date range via command button. Fro mthis date range the data thats falls within that range is copied to a report sheet. Will also need to have all the old data from a earlier querry removed. Have attached example sheet.
I have two worksheets in my report cards:
1) Data - the students are listed in Column A, math scores in Column B, reading scores in Column C and science scores in Column D. The grades of 300 students are entered in this sheet.
Student
Math
Reading
Science
Jimmy
75
84
100
[code].....
2) Report Card template - This is the report card that needs to be generated for each student. It's pulling the student name and grades from the Data worksheet.
Student Name
=Data!$A2
Math
=Data!$B2
Reading
=Data!$C2
Science
=Data!$D2
How do I create worksheets (report cards) for additional students? I have 300 students in the school. I need the next worksheet to reference Data!$A3. I know how to cut and paste the report card template and then edit =Data!A2 to be =Data!A3 to create a report card for Sally. How do I create the 300 report cards I need?
I've been teaching for 13 years. I can create a report card for each student in my class and edit each worksheet individually for each student. Now I've been asked to do this for the whole school and I don't know how to create the other 299 sheets I need.
How do you create a macro to copy the information from my weekly reports to a monthly report and be able to update automatically. If you had 4 worksheets (for each week of the month) and 1 mastersheet for the whole month in a workbook. All titles are the same and If you needed to copy all the data that is in the columns, say, A through I, starting with row 4 to however many rows are in a given week. The reports can be made up of numicerial values, text and dates. Let me know if more information is needed or an example worksheet.
View 4 Replies View RelatedWhat i want to do is copy all records from whatever date i enter, onto sheet test. The full excel file has over 80 worksheets for each individual rep, the example i attached has 8 sheets..
View 9 Replies View RelatedI have an interesting problem (I hope you find it interesting too). I'm trying to find the historical "high" day of the week for a particular stock I follow. I searched for several hours but was honestly unable to make any progress. Normally I do my own formulas, so other than pasting a rare macro, that's pretty much the extent of my (lack of) experience, ie please assume I am a novice....
View 9 Replies View Related