Look For 1st Matching Entry For Multiple Data Ranges In Worksheet
Dec 30, 2008
hello. i'm new to excel and i'm really hoping for some serious help here. i have the basics down however i'm really stumped at this point. Let me try to explain my worksheet. the worksheet has a sheet for data which is used for drop list values in the new patient template sheet. the new patient template which is just that a blank entry sheet that the user duplicates and adds a new patient to the worksheet to track the visits made by medical staff. there could be over a hundred new patient sheets (each named by the patient) at any given time.
here is what i need help with: my sheet is setup on a monthly basis so each patient has a total of 4 - 5 weeks listed with entries for everytime a nurse visits that patient. what i need to know is how to search the cell entries for the first time a visit occurred and the date it occurred and this needs to be broken down by the 1st of the month - the 15th and then again for the 16th - the end of month for every patient sheet in the workbook. the ranges are not together that i need to search for example f14:f20, i14:i20, f35:f41 and so on for the first 15 days of the month. this all needs to happen like in a macro or somehow automatically.
View 14 Replies
ADVERTISEMENT
Jun 8, 2014
I am attempting to place a formula in cell b3 in the attached spreadsheet on the "sheet to pull data into" tab 1 (cell is highlighted yellow) to retrieve value in the yellow highlighted cell in the "Sheet that contains data" which is on a seperate worksheet within the same workbook.
The cells highlighted red in the "sheet to pull into" tab (cells: a1, a3, b1, and b3) are the criteria that needs to be matched to those cells on "sheet that contains data" tab in order to ensure the value returned is correct.Sample of problem.xlsx <----see the attached sample spreadsheet.
View 2 Replies
View Related
Apr 28, 2009
I have made a spreadhseet that track what games an official referees (sheet 1), what games they are touch judge 1 for (Sheet 2) and what games they are touch judge 2 for (sheet 3).
Sheet 4 then adds all these up for me and tells me as an good approximate estimate how much each official should get paid in way of expenses.
Simple enough so far.
I have a list of 3 letter codes on sheet 4 for each official that I put in the matrix of games. It's using these 3 letter codes that it adds it all up. This works fine
How can I get it to tell me if any 3 letter codes entered into the matrix (Sheet 1!D4:CD82) Do not match my list (Sheet 4!A5:A71). (an error detection system if you like).
To make it more interesting I would like it to ignore blank cells (games not played yet).
I'm not bad on excel formulas, but I can't get my head around how to do this.
View 6 Replies
View Related
May 5, 2009
Now that the calculations are working, with the press of a button, I need to be able to select a range of dates and copy all lines within the range to a seperate sheet with the desired name under the same headings they currently reside under. I have included some modified code that is being used in another spreadsheet that was created for me, but I do not pretent to understand all of it and I no longer work with the creator of the spreadsheet. How do I use a button to open the form for date selections and entering the name of the new sheet, and then use the start button on the form to begin the matching and copying to a new sheet? If there is an easier way I am all for that too.
View 14 Replies
View Related
Jul 15, 2009
I want the script to find if the value entered in the form is matching the values in column 'A' in the database and if it matches then it needs to select the cell as active cell - to populate the form details. And if there is no matching value found, the script needs to select the last empty cell of the column 'A' to populate the data entered in the form.
1) Form has 10 different fields that needs to be filled by the user.
2) Field 1 - is a text box for 'Request #' to be entered by the user.
3) After filling in all the fields - once clicked on OK, the form should search for the the 'request #' entered on the form in the database (Form and the database are in the same workbook).
4) If the 'Reqeust #' in the Column 'A' matches the the 'Request #' entered in the form, then the matching cell should be selected (Activecell -Were the data can be overwritten, with the new entry)
5)If there is no matching 'Request #' found in the database, the script should loop to select the next available blank cell in column 'A'. So that the form data can be entered.
View 14 Replies
View Related
Feb 20, 2014
I have two worksheet "ABX" and "ACX" from which I want to find the matching data for specific columns B, D and E only.
Matching data will be in sheet "Match" and vice versa.
Data are present dynamically.
View 1 Replies
View Related
Apr 6, 2007
I have a workbook that I'm trying to figure out. It was made by a previous employee.
This is what the formula looks like =MATCH(B49, OFFSET(Array_Data,,2,,1),0)
Array_Data consists of cells $H$4:$DN$506 on a different worksheet. I've tried to trace the formula but I can't get it to work. I thought I understood the offset function but I've never used it with a named range. Does anyone have a clue on how I can break this down and figure out what cell this data is refering to?
View 3 Replies
View Related
Jan 15, 2007
I am looking for a way to modify the following macro so that I can run the same code for multiple ranges that are on different worksheets.
Private Sub Workbook_SheetChange(ByVal Sh As Object, _
ByVal Target As Excel.Range)
Dim TimeStr As String
On Error Goto EndMacro
If Application.Intersect(Target, Range(" schedule!H4:H35,J4:J35,K4:K35,M4:M35,N4:N35,P4:P35,Q4:Q35,S4:S35,T4:T35,V4:V35,W4:W35,Y4:Y35,Z4:Z35,AB4:AB35")) Is Nothing Then
Exit Sub ..........................
View 9 Replies
View Related
Mar 14, 2014
Is there a formula that will allow me to look for the existence of any number value in a row of one worksheet and then return a specific number value in a cell on another worksheet? For example, if the formula finds any number value it will always return the number 15 to a cell on another worksheet.
View 3 Replies
View Related
Oct 16, 2009
I have a worksheet that, unless a form for data entry is activated, should be read-only for columns 'A' thru 'M' and 'O' with column 'N' left editable.
The form is activated by a button with a macro assigned to enter the data in the above columns when the form is closed. This has been compiled and works nicely with the sheet unlocked, however, as i need certain columns to be read-only unless the form is activated, i'm stuck with leaving the whole sheet unlocked for editing with or without the form being activated.
Is there any way a VBA code could be used to unlock the worksheet columns that are read-only when the form is activated, and then lock them once the form data is entered to the worksheet and the form closed?
View 9 Replies
View Related
Nov 20, 2007
Can you have more than 1 worksheet change event on the same worksheet, if so, how do you name it to prevent the ambiguous name error. What code would I need to select a text value in colums e11:e15 based on the cell value in cell named STATE and place the selected value in cell e16. I have, thanks to this resource, one worksheet change event that selects a numeric value from any column E3,F3:F7 and places that value in cell C4. but the same code doesn't work for the new worksheet change event.
View 4 Replies
View Related
Jul 15, 2008
I have a "cat_no" file and a "master inventory" file.
I need to do a vlookup to match the catalog #'s and mfr name in the cat_no file and the master inventory file. I also need to pull the pricing and packing string from the master inventory file and add it to the cat_no file where item numbers match.
View 14 Replies
View Related
Aug 19, 2006
see teh attached file, you can see on the file. Worksheet B of B62, I typed 15254", it col name "yarn count" and the product code you can see is Q921 at cell A62. Worksheet A, you can see F2 is Q921, col name is "product code". Now I just plugin a vlaue B62 ='15254' and I want it shows on worksheet A - G2 but remember it must match the product code of worksheetB - cellA62 'Q921' and worksheet A cell F2 'Q92' because next time user will plugin a number ie.1111 on B164; where product code of worksheet B - cell A164 must be match to worksheet A - cell F3, but it should show the value 1111 on cell G3.
View 2 Replies
View Related
Nov 12, 2006
I have 2 worksheets in excel.
1. No. Description Code Req Unit Amount
1 Description 591032 1 pc ?
2 Despription 614804 25 pcs ?
etc.
2. No. Code Description Unit Qty Items Amount
1 591032 Description pc 1 84.30 84.30
2 614804 Description pcs 25 0.89 25.25
etc.
I would like to copy the amount in worksheet 2 to paste it to worksheet 1, by searching using code value. Advice: the codes are in different places in worksheet 1 & 2
View 3 Replies
View Related
Jul 19, 2007
I have two worksheets, in worksheet1 i have a table containing two columns, " names" and "projects". In worksheet2 is where I ask for the name of the project. How do I retrieve all the "names" in worksheet2 that have the same "project" to worksheet1.
I know I made a similar thread in here, but that one was answered quite quickly. Then I learned that my question was written quite wrong and so the answer didn't help me much. I thought about rephrasing the question, but I read that this is a one question on one thread forum.
View 7 Replies
View Related
Nov 9, 2009
I have a workbook with multiple worksheets. Each worksheet corresponds to a certain store fixture estimate. Ont these sheets I have a specific cell where you can input how many fixtures of that type are to be used.
On that sheet also, is a range of cells (ex. Range("A65:F3340")) that needs to be copied to a new summations sheet of total hours to build the project.
If sheet 1 has 1 fixture - the macro should copy the range of cells only once.
Sheet 2 has 4 fixtures - tha macro should copy the same range four times appending each set of data tot eh end of the previous, And so on for each fixture sheet.
View 3 Replies
View Related
Mar 26, 2014
There were 2 macros. One printed all of the defined ranges (40) on separate pages, and the other printed all the graphs ("charts" - 39) on separate pages. I tried to combine the VBA code to print each range and then the corresponding graph. Everything is still on separate pages, but it saved time because I didn't have to collate after printing. It seemed to work. Then I tried figure out if I could print them all to a specific tray of the printer as set in the workbook or as the printer default. Now both the combined macro and the original macro are giving errors.
Is the code I have correct to do what I am trying to do (print each range and then the graph all on separate pages)? Is there any way to put the output tray choice into the macro?
Sub Load_Data_Report()
'
' Load_Data_Report Macro (print all tables & graphs)
' Macro recorded 12/21/00 by xxx
'
' Keyboard Shortcut: Ctrl+j
'
[Code] ........
View 1 Replies
View Related
Feb 24, 2010
I have rankings from several different sources all with different rankings for different people with a different number of people in each set of rankings.
I would like to match the names from each ranking set and place the corresponding ranking into one worksheet. I have done this without the code but over the course of the next couple of months the rankings will be changing.
I have them importing from the web so when they update I would also like for my rankings to update. Attached is the rankings each in their own worksheet.
The final sheet is what the end product looks like.
View 4 Replies
View Related
Apr 18, 2008
I have found the following code on this forum that has really worked well. This code matches the first two columns of two worksheets and inputs them into a third worksheet. But I need to be able to copy up to five more columns, a total of seven columns and have it input into the third worksheet. I am not sure what it means "For Each c In Sht1Rng". look at the code and advise me of what I need to do.
Sub FindMatches()
Dim Sht1Rng As Range
Dim Sht2Rng As Range
Set Sht1Rng = Worksheets("Data1").Range("A1", Worksheets("Data1").Range("A65536").End(xlUp))
Set Sht2Rng = Worksheets("Data2").Range("A1", Worksheets("Data2").Range("A65536").End(xlUp))
For Each c In Sht1Rng
Set d = Sht2Rng. Find(c.Value, LookIn:=xlValues)
If Not d Is Nothing Then
Worksheets("Results").Range("A65536").End(xlUp).Offset(1, 0).Value = c.Value
Worksheets("Results").Range("A65536").End(xlUp).Offset(0, 1).Value = c.Offset(0, 1).Value
Set d = Nothing
End If
Next c
End Sub
View 2 Replies
View Related
May 10, 2009
I'm building a spreadsheet for a sporting franchise using a pull-down validation menu. Once the opposing team name is selected from the drop down menu, I would like it to display the opposing teams players and their statistics.
On the database worksheet, I have a web query pulling names and statistics from the web. Each player name has his team name in his corresponding row. What function can I use that will search for that team name and report it back to the display sheet? Once I have the player name there, I think I can figure the statistic portion... But I can't seem to figure out how to pull all of the players with the matching team name into my display sheet.
Example:
A1 on worksheet "A" contains a pull down menu with team names "Lightning", "Storm", "Magic", and "Thunder".
A16-A20 on worksheet "B" contains players from team "Lightning"
A21-A25 on worksheet "B" contains players from team "Storm"
A26-A30 on worksheet "B" contains players from team "Magic"
A31-A35 on worksheet "B" contains players from team "Thunder"
B16-B20 on worksheet "B" contains team name "Lightning"
B21-B25 on worksheet "B" contains team name "Storm"
B26-B30 on worksheet "B" contains team name "Magic"
B31-B35 on worksheet "B" contains team name "Thunder"
If I pull down "Lightning" on A1 (worksheet "A"), I want the following to display:..........................
View 4 Replies
View Related
Feb 25, 2012
I have a few row headings on a fresh worksheet (called "New" like so for A1, B1 and C1 for example):
Date Amount Title
I then have raw data on another worksheet. This data has many column headings (more than on the "New" sheet) and the data for that heading in the column underneath heading. So the Date column will have say 50 rows of dates in the column. What I want to do in VBA is match the headings from the "New" worksheet to the raw data worksheet ("Data") and then copy and paste the data into the column under the row heading in "New" from "Data".
with the code for this? I have tried using MATCH and I can't get it to work. I'm also looking for an efficient way to do this I'm sure I am doing it a very inefficient way.
View 4 Replies
View Related
May 21, 2008
I have some specific requirement and it would be great if I could do it through macro. Also attached a sample excel file for the requirement. I have raw data in a worksheet (WS1) that I receive daily from factory. There is another sheet in a different workbook (WS2) that has format specified on how to display this raw data. The order of raw data on WS1 remains same. The question is that how do I replace the format titles with raw data?
For example, in the attached excel sheet, sheet "data" has list of values. Sheet "format" says how to display data. Sheet "output" is output that I finally want to generate. The sheet "data" will always have data in the same order. I need to read values and replace the format title ( name, age etc) with corresponding values on "data" sheet.
View 5 Replies
View Related
Nov 4, 2012
We need to have various users input data into a spreadsheet, so I have created a userform. Just need some code with the submit button to populate the central sheet, I think that I will need it to open the sheet, paste the data, save and close it.
This is my submit button as it stands, with the form and spreadsheet in the same workbook:
Private Sub btnSubmit_Click()
Dim RowCount As Long
Dim ctl As Control
RowCount = Worksheets("Sheet1").Range("B1").CurrentRegion.Rows.Count
With Worksheets("Sheet1").Range("B1")
.Offset(RowCount, 0).Value = Me.coboPropSalutation.Value
[code]....
View 1 Replies
View Related
Apr 8, 2008
I currently have a spreadsheet that has a total of 20 workbooks in all. Each workbook contains between 5 and 100 rows and between 20-40 columns. Each column is a different category that I have data on for that particular tool manufacturer. What I want to do is create a front workbook where I can do all my searching. I would like the user to impute data into a search cell, hit a macro button, and have the full row that data was in be shown to them. Depending on which criteria they search for, the value may be found at the start, middle or end of the row.
Also, like I said the number of columns differs between each workbook. I would also like it to print out the categories for that workbook so that the person inputing the data knows what all the different numbers are when they come up.
Each workbook is a different tool manufacturer that my company has a tool from so there should never be duplicate data. The problem is that after I finish the spreadsheet, I am turning it over to the floor workers and they will have the ability to add/change any information in any workbook. If a mistake is made and different workbooks have the same data, I would like it to print out the category and data from the first workbook, then print the category and data from the next workbook and so on. The Category headers make up the first 2 rows of each sheet.
View 4 Replies
View Related
Jun 28, 2007
Basically at the moment our static data group use a generic sheet which lists all possible field variables. However, what I want to do is design something which only shows the fields that need to be filled out (ie if the field is shown it needs to be input).
Once the form is filled out it will get saved and sent via email, where it is then printed out and input by our data group. One way I thought about approaching this was to have 18 sheets which are hidden, and which are then selected when a report type is filled out. The other way would be to have IF statements but I think that would get complicated on the one sheet. Just really looking at ideas at this stage.... For example there are 30 fields on the sheet that we use now, but some reports may only need 5 of these fields - I therefore need to "hide" the remaining 25...
View 6 Replies
View Related
Jul 2, 2013
I have a scenario where a cell has to be restricted based on the user input of another cell, also it should allow only Yes or No values.
ex:column A
column B
pending response
submitted
User should be allowed to enter a value in column B as "yes" or "No" only when column A has a value "Submitted"
I referred the thread to restrict entering the data [URL]...
However not able to add list as well.
View 2 Replies
View Related
Jun 20, 2012
I have code that runs through multiple arrays trying to match data to items in the arrays and it takes a long time to run.
Code:
dim a as long
dim b as long
dim c as long
dim d as long
dim e as long
dim MyAarray as variant
[Code] ..........
That's basically what the code does. however, it takes an extremely long time to get through with everything as each array increases in size.
View 7 Replies
View Related
Aug 7, 2013
I have a workbook with 4 sheets one is called final and the other 3 are data1, data2, and data3. The data sheets have the actual data I am needing to pull from. Each has two rows of data: data1 has employee number in column A and employee code in column B. Data2 has employee code in column A and employee name in column B. Data3 has employee name in column A and employee email in column B. Now I need to pull the info form all three sheets into the sheet names final. So the final sheet needs to contain 4 columns for employee number, employee code, employee name, and employee email. The kicker is the data sheets don't line up with each other within each sheet it does but the first one in data1 is not the first in data3 and so on.
View 2 Replies
View Related
May 18, 2006
I've got 2 worksheets SH1 & SH2( Two different workbooks) Col A is NAME in each Sheet. Need to Match Col A Sheet 2 to Col A Sh1 if they are identical. If identical copy info from Col B, and Col E- G to Sheet 1 Col B and Col H-J. If a Name is in Sh2 but not in Sh1, Copy (using same Column positions: copy info from Col B, and Col E- G to Sheet 1 Col B and Col H-J ) to NEXT AVAILABLE ROW in Sh1 COL A, and highlight it in Some bright color ; Then open a MSG Box telling me how many new names were added.
View 8 Replies
View Related
Dec 26, 2008
I have a series of ranges (over 26000) on a s/s and the top five rows in column I consist of:
1. number
2. text + number
3. formula
4. number
5. formula
I wish to delete the fifth entry in all ranges.
Ranges vary in row length from 5 to 30 deep.
View 2 Replies
View Related
