Get Sum Of Range If 3 Conditions Met - Two Sheets

May 15, 2012

How to get the sum of a range if 3 conditions are met.

1 after this date
2 before this date
3 Column G is "OTH"

Ranges are on sheet1
Date reference is on sheet2
range to sum is on sheet1

V14.

Present formula is:
=SUMIF('sheet1'!$P:$P,">="&EOMONTH($A2, -1)+1,'sheet1'!$H:$H)
-SUMIF('sheet1'!$P:$P,">"&EOMONTH($A2,0),'sheet1'!$H:$H)

This works fine but lacks the 3rd condition 'sheet1'!$G:$G ="OTH"

Advise given was to go on SUMPRODUCT but unless with (OFFSET(INDIRECT, SUMPRODUCT wouldn't work on multiple sheets. And this is for version 14...

View 5 Replies


ADVERTISEMENT

How To Add Range From Multiple Sheets With Conditions

Nov 13, 2006

I'm creating a summary sheet that adds up all the data on sheets between start and finish where A2-A25 is SU and B2-B25 is 004*04. Background info: SU stands for SetUp, and 004*04 is a workcenter number (its not 004 times 04) I'm trying to calculate the total number of Setups for each workcenter.

=SUM((start:finish!A2:A25="SU")*(start:finish!B2:B25="004*04"))

gives me a #NAME? error.

Example Data on each spreadsheet:

A B
SU 004*02
SU 004*04
SU 004*04
SU 004*02
SU 004*04

View 9 Replies View Related

Nested If Conditions From Multiple Range (sheets)

Jan 29, 2009

I want to auto fill certain columns in sheet A from sheet B & sheet C based on conditions

For Eg:

Sheet A:

Position#

Position Name

Personnel Name

Personnel No.

AB1

Manager

AB2

I want to auto fill in Sheet A for the columns:

Personnel Name
Personnel No.

Conditions:

If the employee is active in Sheet B then fill in Sheet A to the related position No.

Else

If the employee is mapped to org. (Yes) in Sheet C then fill in Sheet A to the related position No.
Else
Vacancy

i have written the below formula but not working properly:

=IF(VLOOKUP(SheetA!A4,Direct!A$2:K$16,5,FALSE)="Active",VLOOKUP(SheetA!A4,Direct!A$2:K$16,3,FALSE),IF(VLOOKUP(SheetA!A2,Contractors!A$2:K$15,5,FALSE)="Yes",VLOOKUP(SheetA!A2,Contractors!A$2:K$15,3,FALSE),"Vacancy"))

View 9 Replies View Related

Sum Based Conditions In Different Sheets?

Dec 11, 2012

I'm creating stockportfolio's based upon historical stock data. I have 300 stocks with monthly observations. Stocks are assigned to a portfolio based upon their return in the previous 6 months. I need the top 10% stocks in terms of return in previous 6 months (so 30 stocks) in one portfolio and the lowest 10% stocks in terms of returns in previous 6 months returns (so again 30 stocks) in another portfolio. Each portfolio is just a sum of the returns of the stocks that are in there.

First sheet: rows contain the return a stock had in the 6 months before the month in the left column (so january 2006 contains the return a stock would have had from july2005 -december 2005). This is done for 300 stocks. Second sheet: contains the return the stock had in that actual month (so january 2006 just contains the january 2006 return) The third sheet is where I want to create the decile portfolio's. This means that for every month i am creating 10 portfolio's: Each month "portfolio 1" should contain the sum of the returns of the stocks with the 30 highest returns in the past 6 months. "Portfolio 10" should contain the sum of the returns of the stocks with the 30 lowest pas 6 month returns. (30 is 10% of 300: that's why it is called decile portfolio)

So I should sum things from sheet 2 with the condition referring to sheet 1 where the returns of the past 6 months are displayed. I am trying formula's like =SUMIF(RANK...) but am getting no results. Somehow excel should select the right stocks and sum the 30 returns. I'm totally lost after a lot of trials.

View 1 Replies View Related

Vlookup Across 2 Sheets With Conditions

Apr 12, 2008

I have found that excel can be the best thing ever and also a nightmare when you are stuck on something. I really apprecciat anyone who can help me out.

In an excel workbook i have a sheet that has rows and rows of Sales Leads.

In column A i put a letter "C" if they have turned into a client or an "X" if the sale was not made.

I am looking for a function that will look at column A and when it sees the letter "C" then copy the entire row across and put the row into sheet 2.....

View 9 Replies View Related

Add Sheets Based On Conditions

Dec 29, 2006

i am not able to solve this problem.

1- I have 3 tabs in this worksheet with the data - Tabs A , Master Data and refernce Table

2- Suppose column K in the tab " Master Data " has a record or number, they can be repeated as the new data us added every month.

3- Reference table has the list of the same data record ( numbers ) .

Now the situation is if there is a new record in the column K of the master data sheet the Macro should do the following.

a- Check for the record in the reference table , if doesnt exist then add the record in the reference table

b- create another sheet same as the sheet " A" (duplicate of
A) and name it the new record number

b- Plug the new record number in the cell B2 of the new sheet

c - Copy the row 8 from ( D8 to O8 ) in the new sheet from (D8 to
O8)from sheet A

View 5 Replies View Related

Auto Pick Up Info From Different Sheets By Conditions

Dec 26, 2013

I'll need to pick up the rates from sheets "SYD" & "BNE" by info from column A of "Summary", which means if the info in column A is "sydney", the formula should pick up the rates from sheet "SYD", if it's "brisbane", the formula should pick up the rates from sheet "BNE".Also, the rate should be matched by the column B,C & D from "summary" page.

View 8 Replies View Related

VBA - Collecting Array Of Sheets Based On Conditions

May 11, 2011

I need a code to select sheets with pages less than 15 to print out. Also, a code to print out just the first 5 and last 5 pages if its more than 15 pages.

I've tried this so far but no success:

For X = 1 To Worksheets.Count

If Y Is Nothing Then
Set Y = Sheets(X)
Else
If ExecuteExcel4Macro("Get.Document(50)") < 10 Then
Set Y = Union(Y, Sheets(X))

End If
End If

Next X
Y.Select

View 6 Replies View Related

Combine Data From Multiple Sheets With Conditions

Dec 27, 2012

What I would like to do is combine all data (from sheet: Page1,Page2, and Page3) into one sheet named 'Consolidated'. Unfortunately, as you will see from the attached file, my programming and understanding of VBA programming is pretty naive.

What I am after is, when I combine the data, from all sheets into the one, the data should be

1. Automatically Sorted by Patient Name

2. Group, results of the same patient from all sheets one below the other in seperate rows

3. Delete any other rows that may have a patient name and ID, but rest of the rows (New Mole,Clinically Suspicious......Benign Naevus) are blank. (This happens because of the way I have designed my userform. For first visit the details are entered in Page 1, then for second Visit Details are entered in Page2, and for third visit in Page 3. So when I enter the first visit details, the Patient Name and Patient Number are copied into Page 2 and Page 3 even though the other details remain blank. I have done it this way because, if say the Patient comes for visit the second time, the clinician may or may not be aware which visit this would be for the patient. So as soon as they enter patient number, it will give them a message that Patient already exists. So when they click Open Existing Patient Record, the form autopopulates with any notes from their previous visit into the respective page (i.e Page 1,Page 2 or Page 3).

Page 1 (Page 2 and Page 3 are exactly the same)
Patient Name
Patient Number
New Mole
Clinically suspicious
Changed from mapping Photo
Level of Suspicion: Score
Monitor

[code].....

View 3 Replies View Related

New Sheets Created With Template And Populated With Data When Conditions Are Met

Mar 24, 2014

I have a workbook with three sheets: Collections, Client and Interest New sheets created from a range in Sheets("Interest"). The range in Sheets("Interest") holds the client names.

Then the template in Sheets("Client") is copied and pasted into the new sheets

For each new sheets cell B6 holds the client name and .Range("A10:A1317") holds the dates
Sheets("Collections").Range("D10:D1317") holds the dates and .Range("D8:WC8") holds the Client Names
if Sheets("Collections").Range("D8:WC8") = new sheet.cells(6, 4) then
if Sheets("Collections").Range("D10:D1317") = new sheet .range("A10:A1317") then
copy the value in Sheets("Collections").Range("D10:WC10").offset(0, 3) to new sheet .Range("C10:C1317")
end if

move down on row and repeat the steps.

View 8 Replies View Related

Counting One Range With Conditions In Another Range

Aug 17, 2009

I have random "X"s in a column of cells in a range called "Won". I wish to count these if the adjacent cell in another range alled "Valu" is greater than a value determined in the cell E3. The result to be entered in Cell G4. Can use Excel formulas or VBA.

View 4 Replies View Related

Get Max Of Range If 3 Conditions Met

May 15, 2012

How to get the MAX of a range if 3 conditions are met.

1 after this date
2 before this date
3 Column G is equal to A2

Ranges are on sheet1
Date reference is on sheet2
range to sum is on sheet1

V14.

something like
MAX sheet1!H:H
IF sheet1!$G:$G equals $A2
AND sheet1!$P:$P,">="&EOMONTH($B2,-1)+1
AND sheet1!$P:$P,"

View 7 Replies View Related

Counting Within A Range With Conditions

Aug 16, 2009

I have a named range “Value” and wish to count all the values over the value set in cell E3. The result to be entered in cell F4.

I have a second named range “Won”, adjacent to “Value”, and wish to count these values if the adjacent cell in the “Value” range has been counted. The result to be entered in cell G4.

View 2 Replies View Related

Delete Range With Conditions

Aug 10, 2009

I need a macro that will delete a range with some certain conditions. I have a set of dates in column B. The dates are in the format of 2009-01-31 09:15:00.

I need to search this column to find all the dates from the day before the computers date to the first day of the month before the previous days date. For example my computer date right now is August 10, 2009. So i need the macro to find all the dates from August 09, 2009 back to July 01, 2009 and select the entire rows that meet this criteria. Then I need to delete those rows.

Tomorrow when I run the macro it would choose all the data from July 01 - Aug 10, and this will go on each day until the end of december.

View 9 Replies View Related

Average Range By Conditions

Dec 6, 2007

I have written a function below which is supposed to give average of selected range and will ignore #N/A, if any. Naturally, i use array formula:

Function m_avg(mRange As Range)

m_avg.FormulaArray = "=AVERAGE(IF(ISNUMBER(mRange),mRange))"

End Function

the above doesnt work and gives me #VALUE!.

View 3 Replies View Related

Summing First 5 Numbers In Range With Conditions?

Jul 27, 2012

I have a spreadsheet which has data in rows. I need to sum the first 5 values from the left of the range which are greater than zero. BUT if there are less than 5 non zero values present I want to sum from the right of the range.

First condition:
1 2 3 4 5 6 7 8 9 10
The function would return: 1+2+3+4+5 = 15

Second condition:
0 0 0 4 5 6 7 8 9 10
Function would return: 4 + 5 + 6 + 7 + 8 = 30

Third condition:
0 0 0 0 0 0 0 8 9 10
The function would return: 10 + 9 + 8 = 27

I have had success with:
=B4+SUM(SMALL(IF(I4:O4<>0,I4:O4),ROW(1:5)))
(using ctrl shift enter)
BUT it crashes when faced with the third condition.

I would also like to avoid ctrl-shift-enter functions if I can as I don't have much success copying them around the spreadsheet.

View 3 Replies View Related

Array SUM Formula With Range Of Conditions

May 14, 2014

1) Input data are static and helper columns can be added if needed.

2) Filter will be dynamic range (in attachement is the filter static), and the count of years can be changed on users request. So there could be only 2011, but also 2011+2012, 2012+2013+2014 etc.

3) In col 'J', the is what I know to do, but I do not want to use SUMIF+SUMIF+SUMIF... for each year (the count of years will change througt time as mentioned above).

View 3 Replies View Related

Sum Range Of Data From Array Of Conditions

Mar 15, 2014

I am trying to pick certain data from a table and sum it in order to produce a formatted report.

The data has many different items of which I want to pick certain ones to sum on one line

See attached and some of the formula's that I have used, but aren't quite what I'm after

The formula I want to use is .... VLOOKUP(E5:G5,A14:C23,3,) ......

But it wont reference a range (E5:G5) !!! and I also want the formula to ignore blanks (as blanks in the data file are actual totals).

View 2 Replies View Related

Sum The Range Of Data If Two Conditions Are Satisfied

Jul 31, 2008

My data is as follows

MonthMilesAmountLocation
June 8£3.20 Loc1
June 8£3.20 Loc1
June 8£3.20 Loc2
July 8£3.20 Loc2
July 8£3.20 Loc1
July 38£15.20Loc1
July 4£1.60 Loc2
Aug 38£15.20Loc2
Aug 4£1.60 Loc1
Aug 8£3.20 Loc1

Here is what I want to do

- Avoide filtering and manually calculating data for the total expense in the month

I want to SUM all the (3)AMOUNT in the (1)MONTH of JUNE for
(4)LOCATION LOC1

I know its too much to ask for but can you suggest if i can combine SUMIF or SUM(IF) or any other formulas ???

View 10 Replies View Related

VBA - Copy Range Of Rows With Conditions?

Dec 17, 2012

I'm trying to code a clean up of some data ranges ready for priting / reporting. I need to move filtered data from the source sheet, to a new one.

The issue is, that I need to apply some logic to the rows I filter out, not something I can do with autofilter...

- Only copy rows including and BETWEEN the first and last rows where total count in col 8 is > 0
So in example1, I'd want to copy out rows P6 - 1A

BUT
- Always copy at least 5 rows when there is one value > 0 in col 8

So in example2, I'd want to copy out rows P5 - 1C, ideally...

Total
Boys
Girls
Total

[Code]....

View 3 Replies View Related

Finding Row Number Within Range With Conditions

Dec 7, 2006

In the screen shot I'm trying to find the row number where a particular price of an order has been reached. In this case, for the first order, my execution price is 1.8859, my stop loss is 1.8834 and take profit is 1.8884. I need to look and the future prices to determine which event had occured first (either the take profit or the stop loss). I though by using row numbers I would compare and which ever is smallest would mean that it occured first - the profit/loss is then calculated.

The other caveat is that an exact match may not always be available - for example, the second trade is stoped out because the highest price for the 12:35 timeframe exceeds the value I'm looking for. Still it would have triggered a stop loss.

******** ******************** ************************************************************************>Microsoft Excel - Misc.xls___Running: xl2002 XP : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutH6I6J6M6H7I7J7M7H8I8J8M8I9J9M9I10J10M10I11J11M11I12J12M12=
ABCDEFGHIJKLM3DateTimeOpenHighLow*Order*PlacedOrder*PriceStop*LossTake*ProfitStop*Loss*Row*#Take*Profit*Row*#Profit/Loss42006.11.1512:001.88651.88661.8863*N***these*are*the*cells*that*need*the*formula*52006.11.1512:051.88651.88661.8856*N******62006.11.1512:101.88591.88591.8857*Buy1.88591.88341.88841080.002572006.11.1512:151.88581.88591.8853*N*...............

View 10 Replies View Related

Copy Range Based On Certain Conditions

Sep 5, 2006

I have this macro to copy a range to another worksheet:

Sub transpose_UPCID() ' Hace el copy y paste transposed en BAUCS de los numeros de UPC"s y
' las cajas ATR
Dim rng1 As Range
Dim rng2 As Range
Set rng1 = Sheets("Sales-Inventory").Range("UPC", Range("MK_ID").End(xlDown))
Set rng2 = Sheets("Sales-Inventory").Range("Figure", Range("Figure").End(xlDown))
rng1.Copy
Sheets("BAUCS").Range("C11").PasteSpecial Paste:=xlValues, _
Operation:=xlNone, SkipBlanks:=False _
, Transpose:=True
rng2.Copy
Sheets("BAUCS").Range("C37").PasteSpecial Paste:=xlValues, _
Operation:=xlNone, SkipBlanks:=False _
, Transpose:=True
Application.CutCopyMode = True
End Sub

The only problem is that this code copies all the items and I need this code to look into Column A in the Sales-Inventory worksheet. There I have a data validation with a total of six options. I also have six differents worksheets where I need to copy the values based on that data validation. To give you and example, all items containing XX in column A copy to XX worksheet. Something like that.

View 9 Replies View Related

Internal Range Conditions Formula

May 16, 2007

Please take a look at this sample spreadsheet.

[url]

I am trying to find out how to write a formula that will sum the values in one column if the value in a corresponding column is within a range. For example, if the item number in the first column is greater than 2 and less than 7, the sum would be 179. I believe this would be some type of SUMIF but I cannot write it.

View 3 Replies View Related

Validate Range Against Numerous Conditions

Dec 7, 2007

I have a VERY complex custom data validation formula that is getting crazy. I thought it might be easier to use a user defined VBA function to handle it, but was unsuccessful.

I was able to write a VBA User Defined Function & use it within my spreadsheet to derive the value of another cell, as follows: =IF(OR(ISBLANK(B12),myValidation(B12)),"OK","NG")

I tried using it as a Custom Data Validation on the cell itself (=myValidation(B12)), and I get an error: "a named range you specified cannot be found".

Can the function be used in this way or could someone suggest another way of handling this?

View 6 Replies View Related

Count Blanks In Range With Another Dynamic Conditions

Mar 15, 2013

Assume this Data in a spreadsheet

I want to count blank "PI" based on "Product name" & "Product date" occurence together

So I created intermediate field "IS Blank", and I dunno what formula can give me the below results

My obective to get this result
CountBlank for PI = 3

--------------------------------------------------------------------------------
Product Name..... Product Date.... PI...... IsBlank "PI" [Desired Formula output]
xxx .......................ddd ...............Blank.................. 1
xxx .......................ddd ...............Blank.................. 0 (counted above for same xxx&ddd)
xxx .......................ddd222 ..........Blank.................. 1 (PD changed to ddd222)
yyy ......................ttt............... Blank....................1 (another product,yyy)
yyy .....................ttt ...............Blank......................0 (same product and date, so not counting again)

View 9 Replies View Related

Sum Based On Multiple Conditions & Variable Range

May 30, 2008

I have a rolling calendar worksheet that I need to create a formula to auto populate the sum of 8 weeks out, 4 and 8 weeks back based on any work week date I may plug in. So on the "summary page" based on a work week date, I need 8 weeks out, 4 and 8 weeks back projections to be auto summed for 10 different part numbers. The "13 week rolling" page will continue to be updated so that everyweek another week is added and the last week will fall off. (this part can be done manually if no function can delete the oldest column) When the weeks are added it must include the workweek in question. i.e. ww25 = (8weeks out) ww25:ww32 / (4weeks back) ww25:ww22 / (8weeks back) ww25:ww18. see example workbook attached.
This has been driving me nuts for a few weeks now.

View 2 Replies View Related

Count Unique Logs With Multiple Conditions Of Multiple Sheets

Oct 8, 2007

I've got no clue about all this, but I've had to get specific formula examples and fill in the blanks in order for my timesheet to work. There's just one final problem if somebody could please help.

This is a timesheet for a 5 day work week. I need to count the number of unique log numbers for a specific activity. The log numbers counted must be unique across the entire week, not just for each day, which means I want the formula to count the unique log numbers across multiple sheets.

The formula also has multiple conditions. I got 2 columns. The first part of the formula needs to verify a word, say, "split" and if it does it checks the adjacent cell for a unique log number. If both arguments are true, it counts the log as 1 unit.

Here is a working formula for only one page.
=COUNT(IF(D4:D29="split",IF(FREQUENCY(C4:C28,C4:C28)>0,1,)))

Here's 2 problems with this formula:
1. I will count if it encounters a blank cell in the Log numbers the first time (which will happen as not every activity we do has a log#), but it will stop counting if it encounters a second blank cell.

2. I don't know how to make it work across several sheets.

This is an alternate formula which works and skips the blank cells, but I don't know how to add the multiple condition of "split" and to have it work across multiple sheets. I just copied it Microsoft. As I said, I don't understand it, I just fill in the blanks.

SUM(IF(FREQUENCY(IF(LEN(C4:C29)>0,MATCH(C4:C29,C4:C29,0),""), IF(LEN(C4:C29)>0,MATCH(C4:C29,C4:C29,0),""))>0,1))

View 11 Replies View Related

Return Range Address Across Different Columns Based On Conditions

Apr 23, 2008

I am trying to return a cell address range based on values in different columns. Attached is an example.

In Column A1 I have "Range" and below that a set of numbers from 1 to 31.

In Column B1 the name "Test" is used as an identifier, below that are the letters "a" though to "e". Once the letter "e" is reached the identifier "Test" is moved to column C "C6" and the alphabet continues from "f" down to "j". This process is repeated through the rest of the alphabet and the identifier moved to the next column after every 5th letter.

What I want to do is as follows:-

I would like to know the cell addresses of all instances of "test" from Column A numbers 6 throught to 24. The result should be C7:C12, D14:18 & D20:24. The results should ignore all instances of the identifier "test" and only return the cells which contain the letters of the alphabet.

I have tried using Vlookup which works well if the letters are all in the same column and I have incorporated the Address and Match formulas to return the range if all the alphabets are in the same column, but I do not know how to do this if the identifier "test" and letters move to a differnt column.

View 9 Replies View Related

Fill Range With Data Meeting Conditions Based On Cell Value

Apr 23, 2009

refer to attached worksheet.

I need a way (Non-Macro please) - where if a condition is met, then fill a range with a particular value. The attached spreadsheet has a sample with explanation.

View 9 Replies View Related

Fill Multi Columned ListBox Based On Range Meeting 2 Conditions

Mar 14, 2008

I'm trying to populate a dropdown Combo Box by using conditions.

In the example I attached...I would be trying to use ComboBox1.ListFillRange to populate the ComboBox only with players who have "C" in the Position column and "ANA" in the Team Code Column. Which would give me all the Catchers on the Angels.

I've been trying to use worksheetfuntion.Index.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved