Hide Columns In The Master Files Or The Summary Prints
Jun 27, 2007
I have written quite and extensive macro that takes data from many Excel files and creates a summary of them. The problem is that there needs to be no hidden columns in the master files or the summary prints misinformation. I am looking for a way to keep people from hiding any columns (and rows if possible) unless they have a password. The problem is that many people have to get into the masters to update data, so I can't just put a password on the files and be done with it.
View 3 Replies
ADVERTISEMENT
Jun 26, 2009
Need a way to update a single master file. What happens right now is that the cost manager sends out one file to a lot of different project heads and then on having them return back to him he basically has to individually add in all the data. What i am trying to do is that he somehow carries on sending out the data as there are a lottt of projects and then on returning them they automatically update.
View 14 Replies
View Related
Dec 20, 2009
how to create a loop that grabs the ( t'th ) cell and prints into columns on the spreadsheet adjacently that cell and the ones before it (total = t) and repeats it consecutively until there are no more cells to transcribe into columns. For example - I have n=100 cells in a column that need to be placed into n-t columns (where t = 5 for example).
See image below for clarification, code to follow:
As you can see I need it to fill out in the yellow highlighted cells the rest of that pattern. Right now it only does it for one column, but every time I try to get it to do the rest of the columns, it prints the same first column over and over again (I'm having some severe mental block with implementing the correct loop code).
For clarification also, the user selects the t'th cell and it prints that cell and the previous (3 in this case)... and then it shifts down one cell and prints those 4 cells into the next column - which is what I want it to do.
Sub populate_range()
Application.ScreenUpdating = False
Dim rowoffset As Integer
Dim offsetnumber As Integer
rowoffset = Range("F2")
offsetnumber = Range("F2")
Range("d5:iv5").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.ClearContents
Sheet1.Select
Range("b4").Select
ActiveCell.Offset([offsetnumber], 0).Select
Range(ActiveCell, ActiveCell.Offset(-([offsetnumber] - 1), 0)).Select
Selection.Copy............................
View 9 Replies
View Related
Feb 19, 2013
The code bellow allows for me have the current sheet saved "printed" to a pdf file with name taken from a cell value.
After that it also prints 3 hard copies with a cell value being changed for each print.
Can I have this but on the pdf code so that the 3 pages are also saved "printed" to pdf?
Code:
'Selects doPDF to genarate PDF file of invoice and names it accordingly to cell L17 which is the invoice number. Application.ActivePrinter = "doPDF v7 on DOP7:"
ActiveSheet.ExportAsFixedFormat Type:=xlTypePDF, Filename:= _
"E:LusaGenerated InvoicesINV" & Range("L17").Text & ".pdf", _
Quality:=xlQualityStandard, IncludeDocProperties:=False, IgnorePrintAreas _
:=False, OpenAfterPublish:=False
[Code] .......
View 1 Replies
View Related
Mar 24, 2009
I'm working on a monster file having a RAW DATA sheet, analysis sheets and a summary sheet which "milks" the relevant outputs into the preset table’s presentation. The point is the Milking is "alive" and not "copy/paste" like such that any new analysis is immediately summarized. It's only an 8M file but it freezes for "computing cells" every 20-30 second for about 30 seconds. This has a good potential for driving a person crazy. Any idea why is it so slow? Any way to set the update-time to longer time intervals or to update only cells which origin has been changed lately?
View 3 Replies
View Related
Jan 23, 2013
I know it is possible to link multiple worksheets within the same file together but is it possible to link multiple files to report up certain information to a separate file that summarized the data onto one spreadsheet? If so, what would a sample formula be?
View 6 Replies
View Related
May 6, 2009
I am trying to create a summary sheet that automatically gets information from files in a folder.
Lets say I have two folders - Data and Summary. Data folder has many files. Files are added regularly. The files are named in systematic way in following format:
[Unit Number][Type][Job Number]
Exampleas of Unit Number: 75845, JBKU238547-6, T-546
Types: ae, hydro, noret, refurb
Examples of Job Number: 96789, 96780, 95847
The example of a filename will be like this: T-546refurb96780. Each file has a field called test date and up to 13 rows of information in tabular format.
Now, in my Summary file in folder Summary, I would like to automatically get values from all the files that are in the folder Data. If a file is added in the Data folder, the Summary file should automatically know that. The summary has to be sorted based on the test date.
I would like to assign 13 rows for each unit.
View 9 Replies
View Related
Dec 19, 2013
I have a department of around 20 ppl, each have excel files that can contain upto 10 tabs with those in turn possibly containing upto 500 lines each.
I now need to take totals from each person, linking it back to my one 'master' file.
Now i could do this with various VLookups but speed would be an issue here. I will be working off company servers too, so shared drives are involved.
View 1 Replies
View Related
Jan 13, 2010
- I have the following folder/file structure:
MP1
CT
CTfile1.csv
CTfile2.csv
CV
CVfile1.csv
CVfile2.csv
FT
FTfile1.csv
FTfile2.csv
...etc - it keeps on going for more subfolders.
- Every subfolder has 2 different .csv files.
- Every file has the same structure. Relevant info:
. column B - time string
. column C - value
- The files are automatically genarated and report lots of single events (evaluated in Column C) that occurr in a specific time (dd/mm/yyyy hh:mm:ss specified in Column B)
- All files have the same number of lines.
- Line 2 in fileX refers to the same time as Line 2 in fileY; the same for all lines.
What I need is a Macro in a file "Master.xls" placed in folder MP1 to automatically:
1. open each file in the subfolders
2. copy the time string (column B) for A2 down - only needed for the first file
3. copy the relevant info (column C) - in every file
4. close all files
Result: I have a "Master" file with the relevant info of all the others, preceeded by a time string from where I can work (pivot table, graph, etc.). The files can have from 5.000 to 30.000 lines, depending on the day.
View 9 Replies
View Related
Jan 13, 2010
I have about 100 csv files of the same format that I would like to append into a single master file. Order is not important for appending (I can do a column sort later) I can do copying and pasting, but this will take a long time especially because I will creating more master files from completely different CSVs in the future. Is there a faster way to append CSV files?
View 14 Replies
View Related
Nov 15, 2009
My project requires working with 3 different files, in my example here: Delivery Status, Warehouse, and Clients. Delivery Status is the master file where the information is gathered at first. Then when the product arrives, from the column "AI" I choose the Destination which it could be a warehouse or client. So far the code that I have can paste the information in different sheets within the File Warehouse, but can not make the difference between the File warehouse and the file Clients.
In the Delivery Status file I can choose from the Column AI whether the destination is a warehouse or a client and I need Excel to paste the information in the proper file. Have in mind that I have a lot of sheets in both files. I am attaching an example files with the code.
View 2 Replies
View Related
Sep 11, 2009
I have six files that are formatted the same(fld1-1.xlsx, fld1-2.xlsx...). Each file contains an I.D. number (random 25 digit number) in column A and a note (1-9) in column B. The only thing that changes between files is the note column. I want to pull from these six files into a master file. When all six files are combined the note column in the master file is complete, there are no duplicates. Because a blank vlookup returns a zero, could I use an IF formula. Something like IF VLOOKUP FROM data01(ISNUMBER(0), then vlookup in file data02. IF VLOOKUP FROM data02(ISNUMBER(0), then vlookup in file data03.
View 5 Replies
View Related
Jul 11, 2013
I have many folders (around 500) - each of them contains a excel file (the excel files have all the same name), ideally I would like to be able to run a macro from a master excel file that would allow me to add a sheet which I would create in the master excel file and add it to all of the excel files that are in the folders. So far I have used the code from the link: [URL]
VB:
Sub CopyWorkbook()
Dim sh As Worksheet, wb As workbook
Set wb = workbooks("1.xlsx")
[Code].....
but when I change it from 2.xlsx to 1.xslx in the code it works just fine, copying the sheets from the file to itself.
View 2 Replies
View Related
Feb 26, 2014
adapt the code write by TURBO at [URL]....
I'm trying to add more sheets to consolidate the data from different worksheets
What I want it to do is to consolidate each worksheet in every excel file into one workbook that will have the same worksheet structures as the child files
If every excel file has {Sheet1,Sheet2,Sheet3} structure The Master Consolidated workbook should have the same structure but with all the date copied from the child excel files.
Attache it's also an example
Test xls files2.zip
View 5 Replies
View Related
Aug 1, 2013
I'm working on a project that has a master workbook and multiple files that link to the master. The master workbook calculates values based off of a ton of information: account info, pricing info, quantity info, etc. It is a pretty massive excel file, but that is not where the problem arises.
The files that I am trying to link contain relevant information for specific accounts, including prices. The cells that contain product prices are linked to the master workbook. Example: Destination file, lets call this "Company A", Source file, lets call this "Master". In Company A's spreadsheet there is a column that contains pricing specific to that company. This pricing comes from the Master. Most of the pricing is in column C. What I have been doing is copying the relevant cell in the master and "Past Special, Paste Link" in Company A. I do this for every product in Company A's worksheet.
The goal of this is to automate pricing, so that when there are price changes or account changes, one would only have to update the master and all the separate account worksheets would populate with the correct prices. The method I've been using was working perfectly, until I had to edit the master file. I had to insert and delete a few rows from the master file. I work in excel quite often and link cells alot, so I figured that the linked cells would update to the new format, but they aren't. Ex. If a cell in Company A's worksheet is referencing F46 in the master and I delete row 44, I would like the cell to now reference F45, because that is the cell with the correct information. But instead Company A's worksheet isn't adjusting for the deleted row and is still referencing F46.
The only solutions I have found for this issue are to either have all the linked files open when I am editing the master. But seeing as there are almost 25 files, that doesn't seem very practical. The other solution is to never insert or delete rows, just to add on to the end of the master spreadsheet.
View 5 Replies
View Related
May 10, 2013
I am trying to do is write a macro that will pull two tabs labeled "XXXXMarch" "XXXXPTD" (the x's represent numbers) from each file within a designated folder and copy them into a master file.
View 2 Replies
View Related
Apr 17, 2008
How do I write a vb macro that copies everything from multiple files, including sheets within files, and puts them into one master file. Here's what I have so far. I used a script from gnaga that worked great but it didn't copy seperate sheets. If you can help me out, I would greatly appreciate it.
Sub MergeSheets()
Dim SrcBook As Workbook
Dim fso As Object, f As Object, ff As Object, f1 As Object
Application.ScreenUpdating = False
Set fso = CreateObject("Scripting.FileSystemObject")
Set f = fso.Getfolder("C:Temp")
Set ff = f.Files
For Each f1 In ff..........
Set
View 9 Replies
View Related
Feb 14, 2013
I'm a relatively competent VBA user to a macro recorder and basic editing of custom code level but fall short with writing custom code and don't have much used or proven code I can copy from.
Problem: I'd like to automate a process whereby consolidating certain information within many data files (possibly up to 500) into a single tab within a master file.
At the moment there are only a few data files which are manually consolidated by way of manual links but going forward it will increase significantly, hence the need to automate.
I need to consolidate the following 5 cells from each data file A1, A2, A5, A7, A8 (vertical) into a single row within the master file across 5 columns (horizontal), i.e. each data file will populate 1 row in the master file, one below the other. If there are 500 data files there will be 500 rows of data in the master file.
The data files will be saved in a central location on our server and the master file will sit outside this folder, possibly in a subfolder.
Something which would be handy is a link in the master file to each data file, i.e. if I click on a data row in the master file it would jump to the source data file.
View 3 Replies
View Related
Sep 11, 2013
I have a lot of files with data that i need to copy into a master file.
I could open each file copy the data i need and paste it into the file. But I know there must be a way to do a loop macro.
All the files are labled "Sauce Data "Date"". all the data is in the same place in each file. I can easy have a list of all these file names in a tab in a main file "Main Data".
I what to be able to open each file copy from tab "Sauce info" A1:B65, and paste into "Main Data", tab "main" and then create a long list of data.
View 1 Replies
View Related
May 16, 2007
Here is a project I can’t seem to do on my own if you can point me in the right direction I would be grateful! here is the best suedo code to describe the needs of the script:
In the open workbook named MASTER, on Worksheet named -MASTER- ( Let’s refer to this all as just MASTER)
(In production, the name of this workbook will be an account #_ date, and the worksheet will be a date)
For each numeric value in row 6 (we’ll call these values AD###) of MASTER
'*****Part one of routine*****
Search directory "H:AccountingAdvertising Accounts" for workbook named AD### AX.xls
(Note the AX suffix of the file name)
If match is found open workbook and proceed to Part two
If match is not found, goto Private Sub AD_MISSING
'*****Part two of routine*****
View 10 Replies
View Related
Jun 13, 2013
I am trying to make my macro more dynamic for a spreadsheet I am working on. I have this code which splits out worksheets (using the specific names of the worksheets-not dynamic) from a main workbook into template workbooks (which are basically just an empty workbook because I didn't know how else to do it) and then saves them using the paths below. I would like to make this more dynamic by splitting the different worksheets into new workbooks based on a key column in the hierarchy worksheet.
Basically I have a list of accounts in column B with the file name they should be exported to in column A. There are about 30 accounts being split into 6 different region files. Also note that the same account might be listed multiple times in column A (needed to add multiple numbers for other lookup formulas in the worksheets) but that account worksheet will still only be going to one of the six region files and not to multiple regions. After these are copied to an individual file I would like to save it to a location on my computer. All files will go to this location.
VB:
Sub Create_Subfiles()
Dim FDMName As String
Dim FBName As String
Dim DIYName As String
Dim WMName As String
[Code] .....
View 3 Replies
View Related
Oct 29, 2013
I have approx 11 files in one folder and one master file with same format. 11 files are split user wise and user inuputting the remarks against the invoice in coloum Y and Z in their respective files. I want macro/forumul to collect all the remarks coloum from all users to master files against the respective invoice no.
user file format :
file name temp-1.xlsx
A B Y Z
USER
INVOICE
Remark
Follow-up Date
[Code]......
View 1 Replies
View Related
Apr 16, 2009
I have a macro that transfers (copy/paste) information from one master file to several other individual files. The macro works, but I would like
to enhance it by have it spit out errors in the process as follows: if cell A42 on file VP1.xls is not equal to Cell C35 on file Masterfile.xls then make cell E2 ERROR and fomat E2 bold-red, otherwise do nothing. The macro should continue regardless, I just want it to spot errors.
I think this is pretty simple is just a matter of inserting an IF formula in the macro which is something i don't know how to do yet.
View 6 Replies
View Related
Apr 25, 2014
I have the following macro that imports data from several input files and rearranges it in a master file.I want to change it so that I can use it in each of the input files. Therefore, it should look in the input file for Spreadsheet "XYZ" and rearrange it in Spreadsheet "Data".
[Code].....
View 9 Replies
View Related
Aug 29, 2006
I am trying to open set of excel files to fetch data starting from a master excel file where the links are given using a loop. Some of files given as links are either absent or the link is wrong.
* What is the syntax to find if the link is correct/present
* What is the syntax to find if the file is present in specified location
* What is the syntax to find if the file is password protected to open
* I use error handler to resume the next statement if OPEN statement fails.It works fine inside the loop only for first two files.
For example if the third link is errorneous the error handler fails and RUN TIME ERROR occurs.
View 5 Replies
View Related
Nov 22, 2006
I am filtering the data displayed in a chart by hiding columns. I would also like to filter the X-Axis labels by hiding columns. If I do this manually I have no problems but when I run the following macro the chart gives a reference error for the X-axis labels.
Sub ShowA2()
Application. ScreenUpdating = False
num = Sheets.Count
Sheets("X-Axis").Activate
Range(Columns(1), Columns(256)).Select
Selection.EntireColumn.Hidden = False
For a = 1 To 5
Sheets(num - a).Activate
If ActiveSheet.Name = "A2 Data" Then
Columns("A:Q").Select
Range("A10").Activate
Selection.EntireColumn.Hidden = False
Sheets("X-Axis").Activate
Columns("A:E").Select......................
View 3 Replies
View Related
May 22, 2014
I've a table and in the first column titled 'VALUES' (A1) I've entered values ranging from 1 to 100 (A2:A10). In the second column titled 'STATUS' (B1), 'closed' or 'NA' is entered (B2:B10). Now I need to find how many cells are there in the table with 'closed' status in the range 0-25, 26-50, 51-75 and 76-100.
VALUES STATUS
34 Closed
56 NA
44 Closed
98 Closed
18 NA
82 NA
23 Closed
40 NA
63 Closed
71 Closed
Closed Status Count
0 - 25 :
26 - 50 :
51 - 75 :
76 - 100 :
View 1 Replies
View Related
Aug 14, 2009
I have a set of workbooks, with multiple sheets within each which I receive each month from field units. The formats are identical.
What I want to do is to extract data from one column on one specific sheet within each workbook to a summary sheet on a new workbook. In the snapshot below, I would like to collect data from the "Actual" column (in yellow) and then paste it on a summary sheet.
Monthly reportingEntity 13. Risk reportingJanuaryMarket Risks - LoansJanuaryTargetActualVarNumber of competitors 110%Market share 1%1%0%Ranking in market 110%Concentration of portfolio – region-wise (number)1%1%0%Concentration of portfolio – region-wise (value)1%1%0%Market growth rate 1%1%0%Inflation rate 1%1%0%
This would appear in a new summary worksheet as below: (the cell labelled "Entity 1" would then appear as the column header in the summary sheet.)
Monthly reporting - summary sheet3. Risk reportingTarget rangeEntity 1Entity 2Entity 3Market Risks - LoansActualActualActualNumber of competitors 1Market share 1%Ranking in market 1Concentration of portfolio – region-wise (number)1%Concentration of portfolio – region-wise (value)1%Market growth rate 1%Inflation rate 1%
The steps I imagine are:
1. Open all workbooks in a specified folder (folder name upon prompt)
2. Search each workbook for a sheet titled "Risk Reporting"
3. Copy the specified cell (for the column header) and the specified column into a new sheet in a new workbook
4. Move on to fill up the next column, and so on ...
Also is there a way to order the copying so that the columns always line up in a specified order? (e.g. Entity 1, followed by 2, followed by 3 ...). One way I guess is to fix the column headers in my summary sheet, and then fetch the data from the corresponding worksheet, by matching the names.
View 9 Replies
View Related
Sep 28, 2009
Hide the hidden files when you dir a folder. So far I got a code that will dir all files in a selected folder.
View 2 Replies
View Related
Apr 7, 2009
using code to take raw data from one workbook <book1> tab <Phase1RawData> and pasting to summary workbook <book2> onto <SummarySheet>. New data is available with each Phase (14 in all) and will eventually fill all cells as indicated in the Summary Sheet Page. However raw data has in any one Phase only the columns up to the Phase its currently at. So Phase 1 will only have Phase 1 column, Phase two will have columns for Phase 1 and 2, Phase 3 will have 1,2,3 and so on (the example Book1 has two example sheets for phase 1 and phase 2 data - so each phase has a column added with the previous columns remaining.)
The problem is in having the summary sheet always show all 14 phases colmns (as in the example attached) irrespective of which Phase is being updated. So if up to Phase 3, insert the raw data available will be colmns for Phase 1, 2 and 3 - but I need ensure after that has been updated only the remaining Phase colums to 14 show. That is, if Phase 1, 2 or 3 etc are now in place, insert the remaining blank Phase columns to, and including Phase 14. Need to do this at end of each phase until 14 is met. The data up to column S is all from the raw data original sheet - Items from Column T I insert independantly as the data is transferred.
View 2 Replies
View Related
