I am trying to do is write a macro that will pull two tabs labeled "XXXXMarch" "XXXXPTD" (the x's represent numbers) from each file within a designated folder and copy them into a master file.
View 2 RepliesI have six files that are formatted the same(fld1-1.xlsx, fld1-2.xlsx...). Each file contains an I.D. number (random 25 digit number) in column A and a note (1-9) in column B. The only thing that changes between files is the note column. I want to pull from these six files into a master file. When all six files are combined the note column in the master file is complete, there are no duplicates. Because a blank vlookup returns a zero, could I use an IF formula. Something like IF VLOOKUP FROM data01(ISNUMBER(0), then vlookup in file data02. IF VLOOKUP FROM data02(ISNUMBER(0), then vlookup in file data03.
View 5 Replies View RelatedAttached is a master metrics deck, where data needs to be refreshed every week, from two different workbooks.
The catch is, the two parent workbooks would be new versions every week (data would be same format, and style within), but file name would change each week, for eg: for 1st workbook, 'XXX_Weekly_Week24.xlsx' to 'XXX_Weekly_Week25.xlsx' and so on.
for 2nd workbook, 'YYY_Weekly_Week24.xlsx' to 'YYY_Weekly_Week25.xlsx' and so on.
In the master metrics deck, a consolidated vew of some of data from workbook 1 and workbook 2 is presented for each week.
This master file would remain same, and only be refreshed each week (preferably with a button on its sheet "REFRESH!!")
Next, need to manually change cells C2:G2 each week to reflect week titles correctly.
For e.g.: week6 would show week 1 through week 5, but during week7, it needs to show week 2 to week 6. Only last five weeks of data any given time.
The first datarows of each set are conditionally formatted (they are compared with other rows in the set and need to reflect danger values, good values etc) (I have done that already).
I have many folders (around 500) - each of them contains a excel file (the excel files have all the same name), ideally I would like to be able to run a macro from a master excel file that would allow me to add a sheet which I would create in the master excel file and add it to all of the excel files that are in the folders. So far I have used the code from the link: [URL]
VB:
Sub CopyWorkbook()
Dim sh As Worksheet, wb As workbook
Set wb = workbooks("1.xlsx")
[Code].....
but when I change it from 2.xlsx to 1.xslx in the code it works just fine, copying the sheets from the file to itself.
I have approx 11 files in one folder and one master file with same format. 11 files are split user wise and user inuputting the remarks against the invoice in coloum Y and Z in their respective files. I want macro/forumul to collect all the remarks coloum from all users to master files against the respective invoice no.
user file format :
file name temp-1.xlsx
A B Y Z
USER
INVOICE
Remark
Follow-up Date
[Code]......
I need a macro which collects data from two files and dumps it into a separate spreadsheet. I need it to prompt the user to select the two files, since the file names may change.
Once a user selects the files, the macro simply opens them, grabs the data (the data sits on a single sheet in each file) and pastes it into a file, and closes the 2 data files.
The Data sits in A7:N20 on both files.
I was messing around with some Macros, as an issue came up where clients were pasting over Data Validated cells (thus removing the validation). Somehow though, the feature where you can select a cell, then pull the active cell down through the column (and then can copy, fill series, etc)has become disabled. I deleted all the macros, and turned them off in the Trust Center, but when I click on a cell the box and plus sign still won't display for me to pull the cell down the column.
View 2 Replies View RelatedI have the following macro that imports data from several input files and rearranges it in a master file.I want to change it so that I can use it in each of the input files. Therefore, it should look in the input file for Spreadsheet "XYZ" and rearrange it in Spreadsheet "Data".
[Code].....
I wish for a macro to look in to a directory which remains constant, but then looks within a folder which is specified via a cell value in order to load a specific sheet from each file in to the workbook I am currently using. I wish for the loading to be done without having to open the workbooks manually, so something which opens them copies the data from the sheet specified and then closes.
This data is then to be pasted in to a new sheets within my workbook which are named after the file names that it pulls the "dump" sheet from.
As a side note, I will be using these sheets to produce calculations hopefully automatically as soon as they are loaded. They all have the same "shape" but contain differing data. Will it be easier in the long run for me to use this method of pasting data to new sheets named as their file names assuming there will be around 25 "dump" sheets needing to be loaded or would i be better having them paste all to one sheet just underneath each other with a couple of rows separating them?
I have 2 workbooks. The workbooks have 36 tabs for each department. Workbook 1 are current charges for the departments and workbook 2 is the revenue for each department. I would like to take the top 2 rows from workbook 2 and add them to workbook 1 at the bottom of each tab. I was able to get it to work to a specific row but the workbook 1 has variable rows for each tab.
View 3 Replies View RelatedNeed a way to update a single master file. What happens right now is that the cost manager sends out one file to a lot of different project heads and then on having them return back to him he basically has to individually add in all the data. What i am trying to do is that he somehow carries on sending out the data as there are a lottt of projects and then on returning them they automatically update.
Im trying to get my macro to open allow me to select multiple workbooks, then have each workbook open up and copy A2:N2 and down and paste these into my active workbook, under each other, ie on the next available row (basically combining all the workbook data together to create a big list.
The below code works to open a single workbook, copy the data and paste it in at the next available row, but I have to keep running the macro for each workbook whos data I need to import!
How can I modify this code so I can select more than one file? I need something like for each wb .....at the end next wb...until the macro has done the below for all selected workbooks.
VB:
Sub openandcopy()
Dim wb As Workbook
Dim ws As Worksheet
Set ws = ActiveSheet
Set wb = Workbooks.Open(Application.GetOpenFilename)
[Code] .....
I'm looking to create a macro that does the following:
- Loops through a folder structure
- Opens a specific subfolder within each folder based on name (i.e. "*Financials*")
- Opens a specific file within that subfolder "*Financials*" based on both most recently modified a naming criteria (i.e. "*Model*")
- Performs an action on that file (a macro created elsewhere that I assume I can call here)
- Closes that file, and moves on to the next file matching the criteria above
As a self-diagnosed VBA novice, I'm having trouble adapting code found in various forums for my specific project.
I've found examples that address aspects of my desired macro or do similar things, but I can't figure out how to put them together.
Open most recent file:
[Code] .....
Loop through folders and subfolders and print all files:
[Code] ....
I've got a master excel sheet with about 6000 rows of unique variables. In separate source files, I have many rows of these variables with information next to each. Each file has a random number of these variables, some a couple of hundred, some a thousand or two.
What I'm looking to do is to have the master sheet with all 6000 rows and have all of the information next to each variable, with new columns for each new bit of information.
I could sit there for hours copying and pasting each new bit of information to the relevant variable in the master sheet, but I'm convinced there's a quicker way. Is there, for example, a way to filter the master sheet based on the variables contained in one of the source files and therefore (once a-z sorted) copy all the information from a source file and simply paste it into the master file? Then once the filter is lifted the same can be done for the next file (there's only about 20 source files so that's manageable).
I have three months that people fill out on separate sheets. I would like to use a macro to place the contents only from a certain amount of columns to as many rows as it takes (not blank).
Contents Multiple Sheets.xlsm
I have a file that will have a maximum of about 25 tabs in it. They are all the same format - Column A have account codes, Column B have the account name and Column C through to Column AD have figures. Column B has a drop down menu, so not all tabs will have the same account code on the same row.
I thought that I would create another spreadsheet in the file and call it a master sheet with the same formats as all the other tabs but this master file will have all of the account codes available and will not have a drop down menu in column B. What I wanted to do was consolidate all of the 25 tabs in the master sheet.
Example Worksheets
TAB 1
Acc Code Desc Amount
1________a___10
2________b___10
TAB 2
Acc Code Desc Amount
1________a____10
2________b____10...........
I am trying to create a master list in a new sheet based on the data contained in 4 separate tabs. The data is Username, Display Name, Company. Unfortunately some users have accounts in 2 of the companies (with the same username) and I need these to default to Company A.
The output need to be username, Display Name, Company.
I am trying to create a worksheet that you fill in data on the master tab, and it copies to the appropriate secondary tab based on set of criteria
I have one worksheet with multiple tabs.
Tab 1 - Master
- This tab is updated by admin with new contacts
Tab 2 - Customer service rep 1
- This tab will have all the listings that have the CSR1 in a column in the master table.
Tab 3 - Customer Service rep 2
- This tab will have all the listings that have the CSR2 in a column in the master table.
Each table has the same columns of data which all need to be copied to the sub tables if the CSR column matches.
Is there a formula that would work to auto copy data from the master to the appropriate sub tab or maybe its needs to be done in VB?
This is what I am trying to achieve:
1) Prompt user to select a file (or multiple files)
2) Copy the files that meet certain criteria to a folder
My attempt (fail):
VB:
Sub FILES2SFTP() Dim FileNames As Variant Dim I As Integer Dim fso As Variant Dim Data As String ChDrive "G:" ChDir "G:TEST" Data = InputBox("Enter the date", "Enter the date", Format(Application.WorksheetFunction.WorkDay(Date, -1), "yyyymmdd")) Set fso = [code]....
I get error 424 object not found in this line:
If fso.getfilename(FileNames(I).Name) = ("Name1" & Data & ".xls" Or "Name2" & Data & ".xls") Then
I need to be able to pull information from a "master database" into seperate worksheets. Here is my problem. When I use a vlookup and my identifer is say "office property" then the vlookup will only pull the first "office property" and not retrieve any of the remaining "office property" rows.
Is there a posibility that using VBA i can group sheettabs (Sheet 1, Sheet 2, Sheet 3) into 1 single master tab (ex. "MASTER") ?
Since I will be having 20 sheets in a excel file I would like to group them together.
From a master (data entry) spreadsheet of work projects, I'd like to automatically create a tab for each individual contributor that lists all projects they are involved with. The thing is that being a contributor can mean being the lead, assisting with, or being the technician on the project (all columns in the master). To make the individual tabs easier to read, it'd be great to have that tab's contributor name in red, wherever it happens to fall in the various columns.
I've created an example that's a little simpler than reality - in real life there would be 20 tabs for the individual contributors and instead of 3 "Assist" columns there would be 20 columns.
In the annual table tab, I want to be able to select a sales person or other field, and create a table that will pull data from all the tabs. For example, if I select the salesperson Kelly, I want it to pull all of the data from January, February, and March, and compile it into a table.
I would want the table to be dynamic also - I want to be able to quickly sum/average all of that salesperson's sales for all months.
My query is;
I have 2 different worksheets having similar format (header rows/columns) but different data (values). I need to pull out these data based on their values, means if cell is blank leave that cell and move on, but if cell has some value then pull that value with its corresponding row & column headers to place into a simple table to further use it for PivotTable. The number of rows and columns are equal in both worksheets.
So basically, the proposed function will run a check on both worksheets within a specific range of cells for their values and if not blank, it will fetch that cell value along with its relevant row header and column header and place all these attributes into the destination worksheet.
Hope I am quite clear with my query. with the required function to ease my life?
Data extract from sheet to sheet through column header values, i have set of data on sheet1,2..loop end of sheet
i want pull column data from multiple sheet column values into masterdata sheet depends upon column header values assigned in masterdata sheet.. my code works fine! but i want pull data if column header repeats more than one also
SO_NBR this is one heading in multiple sheets i cant pull col values not more than once under if SO_NBR repeats more than once.
[Code] .....
Find the attachment mentioned as expected result sheets is my requirement : HEADER_UPDATES_AIO_$.xls
I am creating a spreadsheet to track customer data and need to reference certain cells in individual customer tabs to a master sheet that contains every customer. Each customer will have his own tab, each tab having the same layout, and each client will also have their own row on one master sheet within the same workbook.
My question is, is it possible to reference the specific cells in the clients individual tab to the master list once, and then everytime I copy a new client tab, the referenced cells in that tab are immediately referenced to the corresponding client (new) row in my master sheet within the same workbook?
I had a friend attempt to help me with this issue but he couldn't figure it out. He suggested that I tried asking around here.
Here is what I am trying to accomplish:
(I am happy to email anybody the spreadsheet to help out with this description)
1. There are two spreadsheets. One spreadsheet with about 25 tabs (one for each store number) and one spreadsheet with one tab and about 1400 lines of information that is sorted by store number. To preface, this 1400 line spreadsheet can be 900 lines one month and 2500 another month, so it fluctuates.
2. From this spreadsheet sorted by store, I will highlight, cut and paste into the corresponding store tab on the first spreadsheet. Also, at any given month, the information fluctuates, it can be 15 lines for one store one month and another month it could be 5.
3. Once I am done cutting and pasting it all into each seperate tab, I have a 26th tab that I am looking to create a button that will then pull all that information into the 26th tab.
I know - first question is why would you want that? You already have all the information from that original spreadsheet. Well, in these store tabs, I have everything perfectly formatted a certain way and I only really cut and paste the information that I need from the 2nd spreadsheet.
I have a spreadsheet that my friend claims he got close to working it out.
Just to add, I would need this button to take into account that the information in each tab fluctuates and also that it is easy to add a tab if I add stores.
I am usuing INDEX and MATCH to pull back employees hours from a master sheet, I am asking excel to Index, matiching firstly the agents name and then the day of the week (Formatted: Mon,Tue,Wed,Thurs,Fri,Sat,Sun). This works perfectly for every day of the week using the following formuls except for Sun where it returns #REF!
=(INDEX(Hours!$B$4:$G$166,MATCH($F$1,Hours!$A$4:$A$166,0),MATCH(C7,Hours!$B$3:$H$3,0)))
I have a macro that enables me to split my master table into separate tabs based on the first column. However, the column widths and the header format is not retained. Is there something I can add to the macro below to keep the formatting?
Code:
Sub DispatchTimeSeriesToSheets() Dim ws As Worksheet
Set ws = Sheets("MasterList")
Dim LastRow As Long
LastRow = Range("A" & ws.Rows.Count).End(xlUp).Row
[Code] ......
I have an (organization) work book that contains departments in different tab with each department having its own tab. In each tab is the employee name, dept manager, dept number and emp number. In the CoverSheet (main sheet) I want to put the department numbers in a drop down menu.Upon selection of a department number i want to Look in the whole workbook to see where the department number is, pull up the department head and all the employees in that department with their employee numbers
The reason for this is that I want to be able to add a button to delete/edit to be able to edit employee details centrally from this particular (CoverSheet) sheet and update the relevant sheet.
Also put in an input box to add employees and update the relevant tab (department)