I want an option, if click on drop down button on parent cell than few a cells will come out in which I have mentioned details of the parent cell.
By pressing the same button again those cells will be hidden or covered under parent cell. ​
i have a workbook with two sheets. i have a command button on sheet 1 that inserts another worksheet from another workbook based on a cell value in sheet 1. i would like this specific command button on sheet 1 to be hidden or disabled until a value is entered into a certain cell on sheet 1 that matches a value in a named range on sheet 2.
View 7 Replies View RelatedWhat i am trying to do is make a command button appear when you hit any cell of the row its on. For example, If you were to hit any cell on rows 1 or 2 the command button will appear and when I am not on the visible property goes back to false. I have a ton of buttons on this sheet and I am trying to clean it up so buttons only appear as needed.
View 9 Replies View RelatedI am trying to allow uses of a spreadsheet to be able to select one control button which would in turn disable another one via check boxes however the control buttons do not re-enable when the undo check box is selected.
Sub Lead_REC()
' Set screen behaviour
Application. ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False
' Defer error handling
On Error Resume Next
Err.Clear
I found this code for a button, so I can collapse and expand a set number of rows within that sheet. It works exactly the way i want it to, however, now I have a second sheet in my workbook, and I used the same button. Problem here is that when I activate the button, it opens the same rows in EVERY sheet in the workbook. "For each ws in Worksheets" so my question is what is the term for it to only work on a certain worksheet?
Code:
Private Sub ToggleButton1_Change()Application.ScreenUpdating = False
Dim ws As Worksheet
With ToggleButton1
If ToggleButton1.Value = True Then
For Each ws In Worksheets
[Code] ........
Other questions is about the ability to send an MS Outlook email from inside of excel.
I've been trying to find something that does the following:
Click button, Form pops up, has drop downs to select recipient, has field for subject, has field for message body, sends email.
After scouring the entire OzGrid, I have found the following two macros that partly satisfy what I want to achieve. BTW, following two macros are executed on Sheet2 and I want to achieve the following:
On Worksheet_Activate, show columns that match the criteria value in Sheet1.D4 (Sheet1.D4 contains a dropdown list with about 6 text values). In addition to that, if Sheet1.D4 value is blank then show all columns. Right now, it successfully shows columns that match the D4 value but does not work if that D4 value is left blank, instead it hides all columns in range (C:CV). So in short, to the first macro, I need to add the criteria if D4 is blank, then keep the sheet intact and don’t hide anything, just show all columns.Once on that sheet after the Worksheet_Activate event has occurred, with the second macro “ToggleColumnsVisibility” following things need to happen. BTW, currently this macro is assigned to a button (from Forms Toolbar).If cell D4 has a value, then the button’s caption should read “Show All” and when that button is pressed, it should show all columns in the range (C:CV), and the button's caption needs to change to “Show Selected”. In “Show Selected” mode, when that button is pressed, it needs to show all the columns that match the D4 value.If cell D4 is left blank, then the button's caption should read "No Action" and when the button is pressed, it should not do anything but just show all columns.
As you will notice in the header, my experience with Excel is very limited, so detailed instructions will be greatly appreciated. I am also hoping that proposed solution uses some of the efficient/effective ways of using loops such as described below (example taken from this website from this link http://www.ozgrid.com/VBA/SpeedingUpVBACode.htm)
Sub TrueOrFalseFaster()
Dim bYesNo As Boolean
Dim i As Integer
bYesNo = (i = 5)
MsgBox bYesNo
End Sub
Sub ToggleTrueOrFalseFaster()
Dim bYesNo As Boolean
bYesNo = Not bYesNo
MsgBox bYesNo
End Sub .........
My query is regarding internet explorer 6 automation via code in VBA (Excel 2003). I'm trying to open a page on clicking a button in main page.
I'm able to open both parent and child pages via VBA, but now want to automate events (like radio btn click etc) in child page.
below is my initial code -
'========
Sub ListLinks()
Dim IeApp As InternetExplorer
Dim sURL As String
Dim IeDoc As Object
Dim i As Long
'Create new instance of IE
Set IeApp = New InternetExplorer
I have two options in a Cell as Applicable and Not Applicable. This is in a Drop-down menu and what I want is that when I choose Applicable, it should bring up additional 5 or 6 cells for me to complete. And if I choose Not Applicable, the additional cells should not show up. The default would be Not Applicable.
How do i make a drop down list in a cell show Select One in the cell when the cells previous contence (Option selected from drop down list) have been deleted. E.g Cell E5:E400 must show Select One in the cell and when clicked on show drop down list I dont want a input message box or error box i can do that with validation
View 1 Replies View RelatedI have a workbook that I want to show or hide a selection of cells depending on another cell when printing it.
Example
If cell x = A2A then display a certain cell set if anything else then exclude cell set from printing.
code to write down to make a checkbox hide the text in a few cells..
What I want is..
When I tick the check box I want it to show me the text in the cells (C11:D11 to be specific) and then when I untick it I want it to hide the text so all you can see is the background colour.
Here is the attatchment of what I have so far:
I'm newer in VBA. I will appreciate for help creating vba procedure. I would like to hide/show range of cells by that condition:
View 11 Replies View RelatedI have a workbook wherein I have 7 sheets.Lets say they are called Tom, Peter, John, Sia, Mia, Tia and "Home Page". I have 2 buttons for Report 1 and 2 to which I want to assign the macros.I also have a table wherein I have defined which sheets I want to show. First Column of table has sheet names from A2:A6(Home Page,Tom, Peter, John, Sia, Mia, Tia). Column 2 has report 1 sheets - Home Page, Tom, John, Mia and Column 3 has report 2 sheet names- Home Page, Peter, Sia, Tia
What I want to do is, if I click on "Report 1" button, I only want to show sheets whose names are there in cells under report 1 so for report 1 it will be Home Page, Tom, John, Mia. For Report 2, it will be Home Page, Peter, Sia, Tia. Since I have many reports I want this to be one macro. Stepwise, here is what I want
1. Click on button for Report, macro should check which report I am referring to and select the range on basis of that. Report 1 = column B, if Report 2, Range is column C.
2. Basis the range I want sheets to show or hide.
Is it possible to hide a command button if a cell value is 0, and unhide if the same cell value is 1.
View 9 Replies View RelatedI have a spreadsheet with two bitmap images inserted into it. In cell E2, I will enter a number, either a 1 or a 2. if I enter a 1, I want only the first image to be visible. If I enter a 2, I only want the second image to be visible. Is there a way to accomplish this (hopefully without the need for macros)? I've attached a spreadsheet as an example of what I'm trying to do. Also, note that I'd like the images to be stacked on top of each other so that they show up in the same place regardless of wether there's a 1 or a 2 in cell E5
View 13 Replies View RelatedI have on Sheet1 a table with a list of values in column A, and their corresponding picture in column B. On Sheet2 I have used the define name option to set up an index,match against the original table so that the relevant picture shows whenever someone selects one of the values in column A.
The problem is, while the pictures will change when the values are changed, because all of the pictures are "named", they will continue to show if a value not in the lookup table is selected.
Is there a piece of code that would allow me to specify if cell=blank,hide picture if not show picture?
I have seen the attached code, however this either shows or hides ALL the pictures on the active sheet, while I want to show or hide the picture in the active cell only.
I made a triangle with the excel forms and I want that it's shown when the value in A1=1 and hidden if value in A1 is NOT 1.
Alternatively: Make the line colour white or something like that. I just don't want to see it anymore
Is that possible without VBA? Or if not, how would I do that?
I have two sheets say:
Sheet1
Sheet2
Sheet1 has a few comboboxes saying (YES / NO) conditions Which are assigned to particular cells (for Ex: say Combobox1 value assignes to Sheet1!B5 )
If Sheet!B5 = YES some rows in Sheet2 Say ( Row12 ,Row 15,Row 16) has to be hide.
I will add a command button to sheet1 and call macro if i click command button checking the conditions in sheet1 combo boxes..rows in sheets2 has to hide..
I have a command button on a worksheet, not in a user form. I know the command button has a property called Visible that I can manually set to False.
I want to set this property to False if the value of the B3 cell is less than 2.000
How to hide command button based on another cell?’ [URL] .....
This works faultlessly but for only 1 Button. I tried adding in the code again for a second Button but it creates a conflict. I made a slight adjustment to your original code, to show the button when the cell is populated, which works well…
[Code] .....
Any way I can:-
1. Add additional buttons which reference their own cell?
CommandButton4 – H9
CommandButton6 – I9
CommandButton2 – Q9
CommandButton3 – S9
2. And add one button which activates based on one of 3 cells?
CommandButton1 – J9 &/or V9
I have a command button on a worksheet, not in a user form. I know the command button has a property called Visible that I can manually set to False.
I want to set this property to False if the value of the B3 cell is less than 2.000
Trying to have A1 in Sheet1 having three values 1,2,3 if A1 = 1 hide rows from 1:5 and 10:1500 in three Sheets2,3,4
View 8 Replies View RelatedI'm quite new to VBA, but I am attempting to get a Forms ComboBox to appear or disappear based on whether a certain cell (P7) reads YES or NO. P7 in turn updates in turn based on a user-selected value. As of now, the ComboBox only appears or disppears if I go back in and out of the formula I entered into P7. Basically, I want my ComboBox to dynamically update based on the value in P7. That may sound a little muddled, so here is my code for the ComboBox:
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("P7")) Is Nothing Then
If UCase(Target) = "YES" Then
Me.Shapes.Range("Drop Down 30").Visible = msoTrue
Else
Me.Shapes.Range("Drop Down 30").Visible = msoFalse
End If
End If
End Sub
I wrote a small code to hide some columns if a certain cell is equal to a certain string.
The cell is actually a drop down list and when they select a certain one, I want it to hide 2 columns. So I wrote the code with sub name Action, but I want it to be running all the time. I tried to achieve this by writing the following code however it gave me error 438 for my 2nd line.
Sub Auto_Open()
Range("A1").OnEntry = "Action"
End Sub
Auto Merged Post Until 24 Hrs Passes;Oh, by the way error 438 states: Object doesn't support this property or method
I want to create a button or a rectangle that has a macro attached. However I only want this button to show on the worksheet when for example A1 >=1.
View 8 Replies View RelatedI was wondering, more specifically, if I could on say a single click on the cell, keep comment open until clicked outside of the cell comment. Currently set up at the moment to show comment on mouseover of the cell. And I would like to keep comment open if i choose to click on the cell.
View 1 Replies View RelatedOn the attached example, i have a check-box with controls cell M4.
There is also a command button on here, which i want to be visible when the cell value of M4 is "TRUE" and not visible when the cell value is "FALSE".
I assume i need to write some code into the worksheet to do this but don't know what to do.
excal VBA programming.I have attached the file name "help" for your easy explanation purpose.
1. Is it possible to hide sheet nos. 1,2,3,4 & unhide the sheet as wished by me by puting the value (1or 2 or 3 or 4) in B3 cell.
2.There are per day production rate in E18 to E22 cell. Now whenever I will give value in H18 or H19 or H20 or H21 or H22, it will check whether the value is same with the respective E 18 or E19 or E20 or E21 or E22 cell. If both the values are not equal then give a message box "WARNING!!! YOUR VALUE IS NOT SAME". Can it be possible by creating VBA programming.
Sub Button294_Click()
If Sheet1.Range("A34:A94") = "HIDE" Then
For Each cell In Range("A27:A94")
If UCase(cell.Value) = "HIDE" Then
cell.EntireRow.Hidden = True
End If
End Sub
I am trying to pull data from more than one drop down but don't the same data to show if already use, example as follow:
First drop down Contains:- Pants
Shirts
Hats
Shoes
Dresses
if I chose Hats it should not show up in the second drop down
second drop down Contains:- Pants
Shirts
Shoes
Dresses
Is this done in data validation or combo Box? if so how?
