i wanna to put check boxes in colums d4:d41 with a formula inside which beginning with this formula (=Sheet1!$D$4) in cell d4.how to copy and drag down this formula into d5:d41?
View 8 RepliesI have tried absolute and relative on the formula in A5 of this sample data below to get A6 to equal D2 and so forth down the sheet. Nothing works except typing in the formula for each cell....
View 9 Replies View RelatedI am trying to link from one spreadsheet to another and drag the cells down to copy the forumula, however I want to drag vertically on Sheet 1, and Copy the values horizontally from sheet 2.
For example, in sheet 1 I link cell A1 to equal cell A1 in Sheet 2. If I drag down the formula in sheet 1 A1:A10 then it will copy the values in cells A1:A10 in sheet 2.
Now what I want it to do is for me to drag the formula in cell A1 down to A10 in sheet 1, but for this to return the values of A1:J1.
On the 'Total' sheet I'm wanting subsequent sheets to fill in on the rows. Do I have to redo the formulas for each row because it will correlate to a different sheet? I only know how to drag the formula down, but that doesn't seem to work right!
View 11 Replies View Related=DCOUNT(timeg15w!$A$1:$F$3909, "WPC",Criteria!A1:C2)
If I simply drag the above formula down I end up with
=DCOUNT(timeg15w!$A$1:$F$3909, "WPC",Criteria!A2:C3)
=DCOUNT(timeg15w!$A$1:$F$3909, "WPC",Criteria!A3:C4)
=DCOUNT(timeg15w!$A$1:$F$3909, "WPC",Criteria!A4:C5)
=DCOUNT(timeg15w!$A$1:$F$3909, "WPC",Criteria!A5:C6)
I am trying to drag the above formula so that it copies in the following manner:
=DCOUNT(timeg15w!$A$1:$F$3909, "WPC",Criteria!A3:C4)
=DCOUNT(timeg15w!$A$1:$F$3909, "WPC",Criteria!A5:C6)
=DCOUNT(timeg15w!$A$1:$F$3909, "WPC",Criteria!A7:C8)
=DCOUNT(timeg15w!$A$1:$F$3909, "WPC",Criteria!A9:C10)
How can I achieve this result?
I am trying to link the cells up in a new workbook the problem is the data I need is setup in a way the formula needs to skip every other row.
For example:
i have a formula that needs to be dragged down 65,000 rows in excel is there a quicker way of do it than with the mouse?
View 3 Replies View RelatedAny way to have the date auto increase 7 days when we drag/copy down the cells. For example, I have the following:
03/31/13
04/07/13
04/14/13
So, when I copy down (let say hundred cells down), the day should show 7 days apart. Is there a formula?
I have sheets with over 40000 rows. I grouped them in 60 and I need the average for every group on the 61st (which is blank). For example, when collapsed I have visible the following blank cells:
A61
A122
A183
A244
and so on.
What I want is to enter a formula in A61 for the average of A1:A60 then drag down and have the correct values in all the rest (average of A62:A121 in A122, etc.).
I want the range to stay as i put it without it +1 when i drag the formula down my spreadsheet, below is the formula im using (for a creche in case your wondering)
=IF(G5<A8,"Baby",IF(G5<A16,"Wobbler", IF(G5<A24,"Toddler",IF(G5<A30,"Playschool","Please use DD/MM/YYYY FORMAT"))))
G5, A16, is taken from a list of dates down the side so i need these to remain constant otherwise my formula goes out.
I have data in every cell within a column. I want to pull data from every 7th Cell.
Ex.
Cell CP7 needs to reference AG10
Cell CP8 needs to reference AG11
This is my formula:
=DCOUNT(timeg15w!$A$1:$F$3909, "WPC",Criteria!A1:C2)
My question concentrates on this part of the formula:...Criteria!A1:C2
When I drag down the formula, it changes, as usually, adding 1 to the cells address, like this:
Criteria!A1:C2
Criteria!A2:C3
Criteria!A3:C4
BUT, I want the formula dragged down, adding 2 instead of 1, changing like this:
Criteria!A1:C2
Criteria!A3:C4
Criteria!A5:C6
How can I achieve this result?
I want to put in cell I3 the value from cell C1, to I4 the value of C49 and so on. How can I do it?
View 5 Replies View RelatedIs there an easy way to drag all the references to a cell in a formula quickly e.g If i have a formula like this is;
=IF(A1>0, A1+1,A1-1)
and want to drag all the references to the cell A1 to another cell in one go as opposed to one at a time?
In my worksheet i have pairs of data from A2:A18. cell A2 is paired with A3, cell A5 to A6.
In cell C2, I have the formula =IF(A2>A3,A2,A3). then in C3 I have =IF(A5>A6,A5,A6).
I would then like to be able to drag these formulas down to C7 and take the appropriate data.
So another example, cell C4 should be =IF(A8>A9,A8,A9).
I have seen many formulas for how to drag skipping a row, but couldn't find anything on pairs of data while skipping a row as well.
The worksheet is attached : TEST.xlsx
1. I have data A1, A2, A3....down a column.
2. I have one value on C2 ( constant value)
3. the formula is a very simple multiplication formula. I want to multiply every single value of column A to C2. But it needs to be in across a row that starts in
D4. So,formula needs to be in (D4, E4, F4) there are other datas in the worksheet
4. So when I input =$A1*$C$2 in D4 it calculates it fine but when i try to drag the formula across the row so [E4=$A2*$C$2, F4=$A3*$C$2...]
it repeates the same fomula as D4 and does not adjust for the increase in column number.
I am making a sheet that has many colums of data that I want to sumup colum wise. I am doing is using this macro ..
=============================================
Sub Add_Totals()
For Each NumRange In Columns("C").SpecialCells(xlConstants, xlNumbers).Areas
SumAddr = NumRange.Address(False, False)
NumRange.Offset(NumRange.Count, 0).Resize(1, 1).Formula = "=SUM(" & SumAddr & ")"
NumRange.Offset(NumRange.Count, -1).Resize(1, 1).Value = "TOTAL="
Next NumRange
End Sub...........
i noticed that when i have a formula that refers to a table, such as:
= sumifs(table1[heading4],table1[heading1],"A",table1[heading2],true)
i can copy-paste it, i also can fill (right or left) a selected range with it,
but, i cannot copy it (right or left) by dragging.
I have the following formulae in seperate cells were A1, A2 and A3 are the cells
A1 =MAX(Data!C2:C3)
A2 =MAX(Data!C4:C5)
A3 =MAX(Data!C6:C7)
I would like to drag the cells so that automatically the cells below A3 are updated as follows
A4 =MAX(Data!C8:C9)
A5 =MAX(Data!C10:C11)
etc up to 600 rows
Unfortunately it is not being updated in that order. Do you have any suggestions how it can be done.
In the attached workbook, see the "P & L" tab, cells I30 to I48. The idea of the formula I have placed into these cells is to drag out the figures from column I in the "Trial Balance" tab of the workbook. A similar formula is used succesfully in the "balance sheet" tab in Column B. I don't understand why the formula doesn't work in the cells i've specified in in the " P & L" tab it seems to work for I8 and the rows immediately below it "revenue".
UK Trial Balance May 2014 V2.xlsx
I am trying to drag down a formula (see below). the cell reference A6 and E6 is not updating to A7 and E7 etc etc when i drag the formula down using the corner thing. it remains constant at A6 and E6.
=HYPERLINK("#INDEX('Shipping Tracker Week X'!$F$4:$F$3000,MATCH(1,('Shipping Tracker Week X'!$B$4:$B$3000=A6)*('Shipping Tracker Week X'!$D$4:$D$3000=E6),0))","Link 1")
im pretty sure the problem comes down to the hashtag and quotation marks that i added, as the formula properly increased the cell references when i drag down without the hashtag and quotations. however, i sort of need it because adding those seems to be the only way i can get the hyperlink to link me over to the other sheet and to the correct cell containing the hyperlink.
part 2 of problem: the hashtag and quotations is currently a workaround method for me. the original intention was for the hyperlink to directly link me to a website, which is referenced from a separate sheet. however, without the hashtag and quotations, i get a "Cannot open specified file" error.
I can drag it down to fill a series of cells within a column.
Let's say the formula in cell A1 is:
I am using a VLOOKUP formula, but when I drag it down it doesn't keep the same array selection. Is there a way so that I can drag it and it relates to the cell to the left, but the array selected stays the same. I don't really want to type the same thig out for every cell as there are 6000. I am using: =VLOOKUP(D2,Working!A2:C23,2,FALSE) and want D2 to change accordingly but for working!A2:C23 to stay the same.
View 2 Replies View RelatedI have a spreadsheet with temperature data, all in one column (D), that was recorded every 10 minutes for several months. In two adjacent columns (E & F), I would like to record the daily max and min temperatures. I can manually do this with MAX and MIN formulas in column E and F respectively, MAX(D1:D144). But when I copy this formula to the next row, I get MAX(D2:D145) when what I really want is MAX(D145:D288)....and so on...
View 1 Replies View RelatedI have set up a formula to sum data from specific columns in multiple sheets in the same file. The simple formula had worked perfectly until I needed the data from the last sheet. In all of the other sheets the data that I need to pull is all in consecutive rows but in the last sheet the data that I need pulled and added is in every 4th row. The sheet looks like this:
All of the columns I've filled in work fine. The ones blank are the ones I am running into issues with. When I drag down the formulas excel pulls the next consecutive rows, which is perfect for the first four sheets I am summing, but for the fifth sheet (I'll ref the Test1 column) I need it to pull 'Wayne 2014'!C6 and then 'Wayne 2014'!C10 in the next row and so forth.
Date
All Test
Test1
Test2
Test3
Test4
$ Amt.
Jan.16
=SUM(C2+D2+E2+F2)
[Code] ........
The first four sheets look like this, which is why they work fine:
Date
All Test
Test1
Test2
Test3
$ Amt.
Jan. 16
=SUM(C2:E2)
[Code] ........
The fifth sheet looks like this: I only want the formulas from the first sheet to pull the data from the dated rows in this sheet.
Date
All Test
Test1
Test2
Test3
$ Amt.
Jan. 16
=SUM(C2:E2)
=SUM(C3:C5)
[Code] ......
Is there any way in Excel 2010 to get it do what I want? (I am not sure how that one cell became outlined and I do not know how to fix it.)
I need a formula to drag down the attached that will place zeros infront of any numbers that don't have 9 digits. so if a part number consists of 6 digits then i need 3 zeros in front of it, if a part number consists of 9 digits then i dont need any zeros proceeding it.
View 2 Replies View RelatedI making a template for multiple users to import data into for analysis. I want them to be able to delete and drag-and-drop data to get rid of any bogus values. However i need forumlas that reference those to NOT follow the values as there as moved. As a simple example say you have two columns, column A is a set of random numbers, column B is the number from coumn A times 2. If take the bottom half of column A and drag it up one cell, overwriting a cell, now the cell in column B next to the overwritten cell has a #REF err and ever cell below that now references a Cell in column A from the previous row. I want a formula that references a static address and will not follow the cell if it is moved.
If I use named ranges rather than specific cells references it works for the above example, however for my actual form it does not. Even though the ranges and formulas stay the same I start getting incorrect values. If there is no other way to this I will try to figure why the named ranges do not work.
I have a form made that needs to copy a value from another sheet. The Form is 10 rows 5 columns and and in format for easy print. On sheet2 I have a column where each row is filled with a name.
I need to put this name into sheet1, so in the the appropriate cell I put =Sheet2!B2 and it gives me the value (name) from the other sheet.
Then I want to copy the form bellow the 1st one so that I have the same form but with the next name, which means I want =Sheet2!B3 to appear when I copy, but since my form is 10 rows when I copy it the formula copies to =Sheet2!B12 instead of B3.
I need to make close to a thousand of this forms ready for printing and I would like to avoid having to manually set the formula for the next cell.
The following macro does what it is designed to do and needs to be run from a control sheet called "Guide". When I run it from this Guide sheet it stops at around row 53 (out of 1400 rows) on each of the specified sheets in the macro. I have struggled with this problem and have now discovered that the macro will run correctly when run from one of the worksheets specified in the array, e.g. sheet "200 and 100".
Sub Calculateclosingtrades1()
Dim r As Long, c As Integer, LastRow As Long, rcheck As Long
LastRow = Range("J65536").End(xlUp).Row
Dim shtTemp As Worksheet
Dim vntName As Variant
For Each vntName In Array("200 and 100", "100 and 50", "50 and 25", "40 and 20", "20 and 10", "15 and 10", "18 and 9", "200 only", "100 only", "50 only", "40 only", "25 only", "20 only", "15 only").............
I am wondering if there is a way to drag a formula, for instance, down, and each cell that I drag down, it references one cell to the right.
Excel Example.png
I attached a photo -- I understand that this is an overly simplified example, but the idea is that it would reference the row as you drag down the column.